CONFIG_MODVERSIONS has been broken for pretty much the whole 4.9 series,
and quite frankly, nobody has cared very deeply.  We absolutely know how
to fix it, and it's not _complicated_, but it's not exactly pretty
either.

This oneliner fixes it without the ugliness, and allows for further
future cleanups.

  "We've secretly replaced their regular MODVERSIONS with nothing at
   all, let's see if they notice"
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ACPI fixes from Rafael Wysocki:
 "Two ACPI fixes for 4.9-rc7.

  One of them reverts a recent ACPI commit that attempted to improve
  reboot/power-off on some systems, but introduced problems elsewhere,
  and the other one fixes kernel builds with the new WDAT watchdog
  driver enabled in some configurations.

  Specifics:

   - Revert the recent commit that caused the ACPI _PTS method to be
     executed in the power-off/reboot code path (as per the
     specification) in an attempt to improve things on some systems
     (apparently expecting _PTS to be executed in that code path), but
     broke power-off/reboot on at least one other machine (Rafael
     Wysocki).

   - Fix kernel builds with the new WDAT watchdog driver enabled in some
     configurations by explicitly selecting WATCHDOG_CORE when enabling
     the WDAT watchdog driver (Mika Westerberg)"

* tag 'acpi-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  watchdog: wdat_wdt: Select WATCHDOG_CORE
  Revert "ACPI: Execute _PTS before system reboot"

Following the kernel Bugzilla discussion during the Kernel Summit
(https://lwn.net/Articles/705245/), add bug tracking system location
entry type (B) to MAINTAINERS and populate it for several subsystems
known to be using the kernel BZ actively (and add the upstream BZ for
ACPICA too).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-sleep-fixes:
  Revert "ACPI: Execute _PTS before system reboot"

* acpi-wdat-fixes:
  watchdog: wdat_wdt: Select WATCHDOG_CORE

Pull MFD fixes from Lee Jones:
 "Received a copule of last minute fixes for v4.9.

  The patches from Viresh are fixing issues displayed in KernelCI"

* tag 'mfd-fixes-4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: wm8994-core: Don't use managed regulator bulk get API
  mfd: wm8994-core: Disable regulators before removing them
  mfd: syscon: Support native-endian regmaps

Pull media fix from Mauro Carvalho Chehab:
 "Fix for the firmware load logic of the tuner-xc2028 driver"

* tag 'media/v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  xc2028: Fix use-after-free bug properly

Pull drm fixes from Dave Airlie:
 "Seems to be quietening down nicely, a few mediatek, one exynos and one
  hdlcd fix, along with two amd fixes"

* tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux:
  gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap
  drm/mediatek: fix null pointer dereference
  drm/mediatek: fixed the calc method of data rate per lane
  drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
  drm/radeon: fix power state when port pm is unavailable (v2)
  drm/amdgpu: fix power state when port pm is unavailable
  drm/arm: hdlcd: fix plane base address update
  drm/amd/powerplay: avoid out of bounds access on array ps.

The kernel WARNs and then crashes today if wm8994_device_init() fails
after calling devm_regulator_bulk_get().

That happens because there are multiple devices involved here and the
order in which managed resources are freed isn't correct.

The regulators are added as children of wm8994->dev.  Whereas,
devm_regulator_bulk_get() receives wm8994->dev as the device, though it
gets the same regulators which were added as children of wm8994->dev
earlier.

During failures, the children are removed first and the core eventually
calls regulator_unregister() for them. As regulator_put() was never done
for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at

	WARN_ON(rdev->open_count);

And eventually it crashes from debugfs_remove_recursive().

--------x------------------x----------------

 wm8994 3-001a: Device is not a WM8994, ID is 0
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 1 at /mnt/ssd/all/work/repos/devel/linux/drivers/regulator/core.c:4072 regulator_unregister+0xc8/0xd0
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-00154-g54fe84cbd50b #41
 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
 [<c010e24c>] (unwind_backtrace) from [<c010af38>] (show_stack+0x10/0x14)
 [<c010af38>] (show_stack) from [<c032a1c4>] (dump_stack+0x88/0x9c)
 [<c032a1c4>] (dump_stack) from [<c011a98c>] (__warn+0xe8/0x100)
 [<c011a98c>] (__warn) from [<c011aa54>] (warn_slowpath_null+0x20/0x28)
 [<c011aa54>] (warn_slowpath_null) from [<c0384a0c>] (regulator_unregister+0xc8/0xd0)
 [<c0384a0c>] (regulator_unregister) from [<c0406434>] (release_nodes+0x16c/0x1dc)
 [<c0406434>] (release_nodes) from [<c04039c4>] (__device_release_driver+0x8c/0x110)
 [<c04039c4>] (__device_release_driver) from [<c0403a64>] (device_release_driver+0x1c/0x28)
 [<c0403a64>] (device_release_driver) from [<c0402b24>] (bus_remove_device+0xd8/0x104)
 [<c0402b24>] (bus_remove_device) from [<c03ffcd8>] (device_del+0x10c/0x218)
 [<c03ffcd8>] (device_del) from [<c0404e4c>] (platform_device_del+0x1c/0x88)
 [<c0404e4c>] (platform_device_del) from [<c0404ec4>] (platform_device_unregister+0xc/0x20)
 [<c0404ec4>] (platform_device_unregister) from [<c0428bc0>] (mfd_remove_devices_fn+0x5c/0x64)
 [<c0428bc0>] (mfd_remove_devices_fn) from [<c03ff9d8>] (device_for_each_child_reverse+0x4c/0x78)
 [<c03ff9d8>] (device_for_each_child_reverse) from [<c04288c4>] (mfd_remove_devices+0x20/0x30)
 [<c04288c4>] (mfd_remove_devices) from [<c042758c>] (wm8994_device_init+0x2ac/0x7f0)
 [<c042758c>] (wm8994_device_init) from [<c04f14a8>] (i2c_device_probe+0x178/0x1fc)
 [<c04f14a8>] (i2c_device_probe) from [<c04036fc>] (driver_probe_device+0x214/0x2c0)
 [<c04036fc>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0)
 [<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c)
 [<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218)
 [<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8)
 [<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84)
 [<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170)
 [<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
 [<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114)
 [<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c)
 ---[ end trace 0919d3d0bc998260 ]---

 [snip..]

 Unable to handle kernel NULL pointer dereference at virtual address 00000078
 pgd = c0004000
 [00000078] *pgd=00000000
 Internal error: Oops: 5 [#1] PREEMPT SMP ARM
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.8.0-rc6-00154-g54fe84cbd50b #41
 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
 task: ee874000 task.stack: ee878000
 PC is at down_write+0x14/0x54
 LR is at debugfs_remove_recursive+0x30/0x150

 [snip..]

 [<c06e489c>] (down_write) from [<c02e9954>] (debugfs_remove_recursive+0x30/0x150)
 [<c02e9954>] (debugfs_remove_recursive) from [<c0382b78>] (_regulator_put+0x24/0xac)
 [<c0382b78>] (_regulator_put) from [<c0382c1c>] (regulator_put+0x1c/0x2c)
 [<c0382c1c>] (regulator_put) from [<c0406434>] (release_nodes+0x16c/0x1dc)
 [<c0406434>] (release_nodes) from [<c04035d4>] (driver_probe_device+0xec/0x2c0)
 [<c04035d4>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0)
 [<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c)
 [<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218)
 [<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8)
 [<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84)
 [<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170)
 [<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
 [<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114)
 [<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c)
 Code: e1a04000 f590f000 e3a03001 e34f3fff (e1902f9f)
 ---[ end trace 0919d3d0bc998262 ]---

--------x------------------x----------------

Fix the kernel warnings and crashes by using regulator_bulk_get()
instead of devm_regulator_bulk_get() and explicitly freeing the supplies
in exit paths.

Tested on Exynos 5250, dual core ARM A15 machine.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The order in which resources were freed in wm8994_device_exit() isn't
correct. The regulators are removed before they are disabled.

Fix it by reordering code a bit, which makes it exact opposite of
wm8994_device_init() as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The regmap devicetree binding documentation states that a native-endian
property should be supported as well as big-endian & little-endian,
however syscon in its duplication of the parsing of these properties
omits support for native-endian. Fix this by setting
REGMAP_ENDIAN_NATIVE when a native-endian property is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Merge branch 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

This branch include patches of fixing a typo, accurate dsi frame rate,
and fixing null pointer dereference.

* 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags:
  drm/mediatek: fix null pointer dereference
  drm/mediatek: fixed the calc method of data rate per lane
  drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE

Free memory mapping, if hdmi_probe is not successful.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull MMC fixes from Ulf Hansson:
 "MMC host:

   - sdhci-of-esdhc: Fix card detection
   - dw_mmc: Fix DMA error path"

* tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc: fix the error handling for dma operation
  mmc: sdhci-of-esdhc: fixup PRESENT_STATE read

Pull USB fixes from Greg KH:
 "Here are a few small USB fixes and new device ids for 4.9-rc7.

  The majority of these fixes are in the musb driver, fixing a number of
  regressions that have been reported but took a while to resolve. The
  other fixes are all small ones, to resolve other reported minor
  issues.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()
  phy: twl4030-usb: Fix for musb session bit based PM
  usb: musb: Drop pointless PM runtime code for dsps glue
  usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
  usb: musb: Fix PM for hub disconnect
  usb: musb: Fix sleeping function called from invalid context for hdrc glue
  usb: musb: Fix broken use of static variable for multiple instances
  USB: serial: cp210x: add ID for the Zone DPMX
  usb: chipidea: move the lock initialization to core file
  Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
  USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad

Pull HID fixes from Jiri Kosina:

 - DMA-on-stack fixes for a couple drivers, from Benjamin Tissoires

 - small memory sanitization fix for sensor-hub driver, from Song
   Hongyan

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: clear memory to avoid random data
  HID: rmi: make transfer buffers DMA capable
  HID: magicmouse: make transfer buffers DMA capable
  HID: lg: make transfer buffers DMA capable
  HID: cp2112: make transfer buffers DMA capable

Otherwise each individual rotator char would be printed in a new line:

(...)
[    0.642350] -
[    0.644374] |
[    0.646367] -
(...)
Signed-off-by: Nicolas Schichan <nicolas.schichan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The probe function requests the interrupt before initializing
the ddp component. Which leads to a null pointer dereference at boot.
Fix this by requesting the interrput after all components got
initialized properly.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC
MT8173.")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Change-Id: I57193a7ab554dfb37c35a455900689333adf511c

Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
mode, those signals will cause h-time larger than normal and reduce FPS.
So need to multiply a coefficient to offset the extra signal's effect.
  coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
		 Ths_trail+Ths_exit)/(htotal*bpp/lane_number)
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

If we want to set the hardware OD to relay mode,
we have to set DISP_OD_CFG register rather than
OD_RELAYMODE; otherwise, the system will access
the wrong address.

Change-Id: Ifb9bb4caa63df906437d48b5d5326b6d04ea332a
Fixes: 72164364 ("drm/mediatek: set mt8173 dithering function")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>

A late issue discovered by Russell King while testing his setup on Juno.

* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
  drm/arm: hdlcd: fix plane base address update

one small powerplay fix and one regression fix for older PX systems and d3cold

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix power state when port pm is unavailable (v2)
  drm/amdgpu: fix power state when port pm is unavailable
  drm/amd/powerplay: avoid out of bounds access on array ps.

The commit 8dfbcc43 ("[media] xc2028: avoid use after free") tried
to address the reported use-after-free by clearing the reference.

However, it's clearing the wrong pointer; it sets NULL to
priv->ctrl.fname, but it's anyway overwritten by the next line
memcpy(&priv->ctrl, p, sizeof(priv->ctrl)).

OTOH, the actual code accessing the freed string is the strcmp() call
with priv->fname:
	if (!firmware_name[0] && p->fname &&
	    priv->fname && strcmp(p->fname, priv->fname))
		free_firmware(priv);

where priv->fname points to the previous file name, and this was
already freed by kfree().

For fixing the bug properly, this patch does the following:

- Keep the copy of firmware file name in only priv->fname,
  priv->ctrl.fname isn't changed;
- The allocation is done only when the firmware gets loaded;
- The kfree() is called in free_firmware() commonly

Fixes: commit 8dfbcc43 ('[media] xc2028: avoid use after free')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Pull NFS client bugfixes from Anna Schumaker:
 "Most of these fix regressions or races, but there is one patch for
  stable that Arnd sent me

  Stable bugfix:
   - Hide array-bounds warning

  Bugfixes:
   - Keep a reference on lock states while checking
   - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
   - Don't call close if the open stateid has already been cleared
   - Fix CLOSE rases with OPEN
   - Fix a regression in DELEGRETURN"

* tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.x: hide array-bounds warning
  NFSv4.1: Keep a reference on lock states while checking
  NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
  NFSv4: Don't call close if the open stateid has already been cleared
  NFSv4: Fix CLOSE races with OPEN
  NFSv4.1: Fix a regression in DELEGRETURN

Pull arch/tile bugfix from Chris Metcalf:
 "This fixes a bug that causes reboots after 208 days of uptime :-)"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: avoid using clocksource_cyc2ns with absolute cycle count

For large values of "mult" and long uptimes, the intermediate
result of "cycles * mult" can overflow 64 bits.  For example,
the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock;
we have mult = 853, and after 208.5 days, we overflow 64 bits.

Since clocksource_cyc2ns() is intended to be used for relative
cycle counts, not absolute cycle counts, performance is more
importance than accepting a wider range of cycle values.  So,
just use mult_frac() directly in tile's sched_clock().

Commit 4cecf6d4 ("sched, x86: Avoid unnecessary overflow
in sched_clock") by Salman Qazi results in essentially the same
generated code for x86 as this change does for tile.  In fact,
a follow-on change by Salman introduced mult_frac() and switched
to using it, so the C code was largely identical at that point too.

Peter Zijlstra then added mul_u64_u32_shr() and switched x86
to use it.  This is, in principle, better; by optimizing the
64x64->64 multiplies to be 32x32->64 multiplies we can potentially
save some time.  However, the compiler piplines the 64x64->64
multiplies pretty well, and the conditional branch in the generic
mul_u64_u32_shr() causes some bubbles in execution, with the
result that it's pretty much a wash.  If tilegx provided its own
implementation of mul_u64_u32_shr() without the conditional branch,
we could potentially save 3 cycles, but that seems like small gain
for a fair amount of additional build scaffolding; no other platform
currently provides a mul_u64_u32_shr() override, and tile doesn't
currently have an <asm/div64.h> header to put the override in.

Additionally, gcc currently has an optimization bug that prevents
it from recognizing the opportunity to use a 32x32->64 multiply,
and so the result would be no better than the existing mult_frac()
until such time as the compiler is fixed.

For now, just using mult_frac() seems like the right answer.

Cc: stable@kernel.org [v3.4+]
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

v2: agd: fix typo

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Reported-and-tested-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

When user tried to read some fields like hysteresis from IIO sysfs on some
systems, it fails. The reason is that this field is a byte field and caller
of sensor_hub_get_feature() passes a buffer of 4 bytes. Here the function
sensor_hub_get_feature() copies the single byte from the report to the
caller buffer and returns "1" as the number of bytes copied. So caller
can use the return value.

But this is done by multiple callers, so if we just change the
sensor_hub_get_feature so that caller buffer is initialized with 0s
then we don't to change all functions.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

[jkosina@suse.cz: fix up second usage of hid_hw_raw_request(), spotted by
 0day build bot]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Kernel v4.9 strictly enforces DMA capable buffers, so we need to remove
buffers allocated on the stack.

Use a spinlock to prevent concurrent accesses to the buffer.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull perf fixes from Ingo Molnar:
 "Six fixes for bugs that were found via fuzzing, and a trivial
  hw-enablement patch for AMD Family-17h CPU PMUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Allow only a single PMU/box within an events group
  perf/x86/intel: Cure bogus unwind from PEBS entries
  perf/x86: Restore TASK_SIZE check on frame pointer
  perf/core: Fix address filter parser
  perf/x86: Add perf support for AMD family-17h processors
  perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC
  perf/core: Do not set cpuctx->cgrp for unscheduled cgroups

Pull crypto fixes from Herbert Xu:
 "The last push broke algif_hash for all shash implementations, so this
  is a follow-up to fix that.

  This also fixes a problem in the crypto scatterwalk that triggers a
  BUG_ON with certain debugging options due to the new vmalloced-stack
  code"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy
  crypto: algif_hash - Fix result clobbering in recvmsg

Pull thermal management fix from Zhang Rui:
 "We only have one urgent fix this time.

  Commit 3105f234 ("thermal/powerclamp: correct cpu support check"),
  which is shipped in 4.9-rc3, fixed a problem introduced by commit
  b721ca0d ("thermal/powerclamp: remove cpu whitelist").

  But unfortunately, it broke intel_powerclamp driver module auto-
  loading at the same time. Thus we need this change to add back module
  auto-loading for 4.9"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/powerclamp: add back module device table

Pull SCSI fixes from James Bottomley:
 "Two small fixes.

  One prevents timeouts on mpt3sas when trying to use the secure erase
  protocol which causes the erase protocol to be aborted. The second is
  a regression in a prior fix which causes all commands to abort during
  PCI extended error recovery, which is incorrect because PCI EEH is
  independent from what's happening on the FC transport"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery
  scsi: mpt3sas: Fix secure erase premature termination

Pull clk fixes from Stephen Boyd:
 "A handful of driver fixes.

  The sunxi fixes are for an incorrect clk tree configuration and a bad
  frequency calculation. The other two are fixes for passing the wrong
  pointer in drivers recently converted to clk_hw style registration"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: efm32gg: Pass correct type to hw provider registration
  clk: berlin: Pass correct type to hw provider registration
  clk: sunxi: Fix M factor computation for APB1
  clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent

A correct bugfix introduced a harmless warning that shows up with gcc-7:

fs/nfs/callback.c: In function 'nfs_callback_up':
fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds]

What happens here is that the 'minorversion == 0' check tells the
compiler that we assume minorversion can be something other than 0,
but when CONFIG_NFS_V4_1 is disabled that would be invalid and
result in an out-of-bounds access.

The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this
really can't happen, which makes the code slightly smaller and also
avoids the warning.

The bugfix that introduced the warning is marked for stable backports,
we want this one backported to the same releases.

Fixes: 98b0f80c ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull scheduler fixes from Ingo Molnar:
 "Two fixes for autogroup scheduling, for races when turning the feature
  on/off via /proc/sys/kernel/sched_autogroup_enabled"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Do not use autogroup->tg in zombie threads
  sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:
   - two fixes to make (very) old Intel CPUs boot reliably
   - fix the intel-mid driver and rename it
   - two KASAN false positive fixes
   - an FPU fix
   - two sysfb fixes
   - two build fixes related to new toolchain versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt
  x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well
  x86/platform/intel-mid: Register watchdog device after SCU
  x86/fpu: Fix invalid FPU ptrace state after execve()
  x86/boot: Fail the boot if !M486 and CPUID is missing
  x86/traps: Ignore high word of regs->cs in early_fixup_exception()
  x86/dumpstack: Prevent KASAN false positive warnings
  x86/unwind: Prevent KASAN false positive warnings in guess unwinder
  x86/boot: Avoid warning for zero-filling .bss
  x86/sysfb: Fix lfb_size calculation
  x86/sysfb: Add support for 64bit EFI lfb_base