The RMA (RMO is a misnomer) is a concept specific to ppc64 (in fact
server ppc64 though I hijack it on embedded ppc64 for similar purposes)
and represents the area of memory that can be accessed in real mode
(aka with MMU off), or on embedded, from the exception vectors (which
is bolted in the TLB) which pretty much boils down to the same thing.

We take that out of the generic MEMBLOCK data structure and move it into
arch/powerpc where it belongs, renaming it to "RMA" while at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This introduce memblock.current_limit which is used to limit allocations
from memblock_alloc() or memblock_alloc_base(..., MEMBLOCK_ALLOC_ACCESSIBLE).

The old MEMBLOCK_ALLOC_ANYWHERE changes value from 0 to ~(u64)0 and can still
be used with memblock_alloc_base() to allocate really anywhere.

It is -no-longer- cropped to MEMBLOCK_REAL_LIMIT which disappears.

Note to archs: I'm leaving the default limit to MEMBLOCK_ALLOC_ANYWHERE. I
strongly recommend that you ensure that you set an appropriate limit
during boot in order to guarantee that an memblock_alloc() at any time
results in something that is accessible with a simple __va().

The reason is that a subsequent patch will introduce the ability for
the array to resize itself by reallocating itself. The MEMBLOCK core will
honor the current limit when performing those allocations.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Nobody uses it anymore. It's semantics were ... weird
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

CC: Michal Simek <monstr@monstr.eu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Walk memblock's using for_each_memblock() and use memblock_region_base/end_pfn() for
getting to PFNs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Instead of the deprecated memblock_find()
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The implementation is pretty much similar. There is a -small- added
overhead by having another function call and the address shift.

If that becomes a concern, I suppose we could actually have memblock
itself expose a memblock_pfn_valid() which then ARM can use directly
with an appropriate #define...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

To make it fast, we steal ARM's binary search for memblock_is_memory()
and we use that to also the replace existing implementation of
memblock_is_reserved().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

All callers expect a boolean result which is true if the region
overlaps a reserved region. However, the implementation actually
returns -1 if there is no overlap, and a region index (0 based)
if there is.

Make it behave as callers (and common sense) expect.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Fix recovery stuck bug (try #2)
  GFS2: Fix typo in stuffed file data copy handling
  Revert "GFS2: recovery stuck on transaction lock"
  GFS2: Make "try" lock not try quite so hard
  GFS2: remove dependency on __GFP_NOFAIL
  GFS2: Simplify gfs2_write_alloc_required
  GFS2: Wait for journal id on mount if not specified on mount command line
  GFS2: Use nobh_writepage

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: do not warn unnecessarily
  UBI: do not print message about corruptes PEBs if we have none of them
  UBI: improve delete-compatible volumes handling
  UBI: fix error message and compilation warnings
  UBI: generate random image_seq when formatting MTD devices
  UBI: improve ECC error message
  UBI: improve corrupted flash handling
  UBI: introduce eraseblock counter variables
  UBI: introduce a new IO return code
  UBI: simplify IO error codes

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix a memory leak on error path.
  UBIFS: fix GC LEB recovery
  UBIFS: use ERR_CAST
  UBIFS: check return code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits)
  9p: fix sparse warnings in new xattr code
  fs/9p: remove sparse warning in vfs_inode
  fs/9p: destroy fid on failed remove
  fs/9p: Prevent parallel rename when doing fid_lookup
  fs/9p: Add support user. xattr
  net/9p: Implement TXATTRCREATE 9p call
  net/9p: Implement attrwalk 9p call
  9p: Implement LOPEN
  fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
  9p: Implement TMKDIR
  9p: Implement TMKNOD
  9p: Define and implement TSYMLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Implement client side of setattr for 9P2000.L protocol.
  9p: getattr client implementation for 9P2000.L protocol.
  fs/9p: Pass the correct user credentials during attach
  net/9p: Handle the server returned error properly
  9p: readdir implementation for 9p2000.L
  9p: Make use of iounit for read/write
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs simplify and speed up direct I/O completions
  xfs: move aio completion after unwritten extent conversion
  direct-io: move aio_complete into ->end_io
  xfs: fix big endian build
  xfs: clean up xfs_bmap_get_bp
  xfs: simplify xfs_truncate_file
  xfs: kill the b_strat callback in xfs_buf
  xfs: remove obsolete osyncisosync mount option
  xfs: clean up filestreams helpers
  xfs: fix gcc 4.6 set but not read and unused statement warnings
  xfs: Fix build when CONFIG_XFS_POSIX_ACL=n
  xfs: fix unsigned underflow in xfs_free_eofblocks
  xfs: use GFP_NOFS for page cache allocation
  xfs: fix memory reclaim recursion deadlock on locked inode buffer
  xfs: fix xfs_trans_add_item() lockdep warnings
  xfs: simplify and remove xfs_ireclaim
  xfs: don't block on buffer read errors
  xfs: move inode shrinker unregister even earlier
  xfs: remove a dmapi leftover
  xfs: writepage always has buffers
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits)
  cifs: fsc should not default to "on"
  [CIFS] remove redundant path walking in dfs_do_refmount
  cifs: ignore the "mand", "nomand" and "_netdev" mount options
  cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
  cifs: don't allow cifs_iget to match inodes of the wrong type
  [CIFS] relinquish fscache cookie before freeing CIFSTconInfo
  cifs: add separate cred_uid field to sesInfo
  fs: cifs: check kmalloc() result
  [CIFS] Missing ifdef
  [CIFS] Missing line from previous commit
  [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
  cifs: add mount option to enable local caching
  cifs: read pages from FS-Cache
  cifs: store pages into local cache
  cifs: FS-Cache page management
  cifs: define inode-level cache object and register them
  cifs: define superblock-level cache index objects and register them
  cifs: remove unused cifsUidInfo struct
  cifs: clean up cifs_find_smb_ses (try #2)
  cifs: match secType when searching for existing tcp session
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

avoid potential stack overflow by correctly checking count parameter
Reported-by: Ilja <ilja@netric.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure,
free allocated resources.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

fixes:

  CHECK   fs/9p/xattr.c
	fs/9p/xattr.c:73:6: warning: Using plain integer as NULL pointer
	fs/9p/xattr.c:135:6: warning: Using plain integer as NULL pointer
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

make v9fs_dentry_from_dir_inode static
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9P spec says:
"It is correct to consider remove to be a clunk with the
side effect of removing the file if permissions allow. "

So even if remove fails we need to destroy the fid.

Without this patch an rmdir on a directory with contents leave
the new cloned directory fid fid attached to fidlist. On umount
we dump the fids on the fidlist

~# rmdir /mnt2/test4/
rmdir: failed to remove `/mnt2/test4/': Directory not empty
~# umount /mnt2/
~# dmesg
[  228.474323] Found fid 3 not clunked
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

TXATTRCREATE:  Prepare a fid for setting xattr value on a file system object.

 size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
 size[4] RXATTRCREATE tag[2]

txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.

flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."

The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

TXATTRWALK: Descend a ATTR namespace

 size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
 size[4] RXATTRWALK tag[2] size[8]

txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Implement 9p2000.L version of open(LOPEN) interface in 9p client.

For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.

Synopsis:

    size[4] Tlopen tag[2] fid[4] mode[4]

    size[4] Rlopen tag[2] qid[13] iounit[4]

[Fix mode bit format - jvrao@linux.vnet.ibm.com]
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>

SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>