- 07 Apr, 2019 7 commits
-
-
David S. Miller authored
Jerome Brunet says: ==================== net: phy: add Amlogic g12a support This patchset adds the necessary bits to support network on the Amlogic g12a SoC family. Only the internal PHY and related MDIO mux needed to be addressed. The GMAC remains compatible with axg SoC family This series has been tested on the u200 (S905D2) with both the internal and external (Realtek) PHYs. Change since v2 [1]: * Change 'clk part' Reviewed-by as suggested * Remove default callback from phy drivers * Use exact match PHY macros * Default MDIO g12a as module if ARCH_MESON is enabled * Don't print error on probe defer in the g12a mdio mux Change since v1 [0]: * drop '_' from function name unrelated to locking * fix peripheral clock disable on error * fix variable declaration reverse Xmas trees * fix Kconfig dependency on CCF (Actually needed for 'struct clk_hw', Thx Andrew !) * Minor fix in the DT exemple as reported by Rob [0] https://lkml.kernel.org/r/20190314140135.19184-1-jbrunet@baylibre.com [1] https://lkml.kernel.org/r/20190329141512.29867-1-jbrunet@baylibre.com ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jerome Brunet authored
The purpose of this change is to align the gxl and g12a driver declaration. Like on the g12a variant, remove genphy_aneg_done() from the driver declaration as the net phy framework will default to it anyway. Also, the gxl phy id should be an exact match as well, so let's change this and use the macro provided. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jerome Brunet authored
The g12a SoC family uses the type of internal PHY that was used on the gxl family. The quirks of gxl family, like the LPA register corruption, appear to have been resolved on this new SoC generation. Signed-off-by:
-
Jerome Brunet authored
Add support for the mdio mux and internal phy glue of the g12a SoC family Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # clk parts Signed-off-by:
-
Jerome Brunet authored
Add documentation for the device tree bindings of the MDIO mux of Amlogic g12a SoC family Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yuval Shaia authored
Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Yuval Shaia authored
This header is not in use - remove it. Signed-off-by:
-
- 06 Apr, 2019 1 commit
-
-
Heiner Kallweit authored
In contrast to switching rx irq coalescing off what fixed an issue, switching tx irq coalescing off is merely a latency optimization, therefore net-next. As part of this change: - Remove INTT_0 .. INTT_3 constants, they aren't used. - Remove comment in rtl_hw_start_8169(), we now have a detailed description by the code in rtl_set_coalesce(). - Due to switching irq coalescing off per default we don't need the initialization in rtl_hw_start_8168(). If ethtool is used to switch on coalescing then rtl_set_coalesce() will configure this register. For the sake of completeness: This patch just changes the default. Users still have the option to configure irq coalescing via ethtool. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 05 Apr, 2019 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linuxLinus Torvalds authored
Pull mm/compaction fixes from Mel Gorman: "The merge window for 5.1 introduced a number of compaction-related patches. with intermittent reports of corruption and functional issues. The bugs are due to sloopy checking of zone boundaries and a corner case where invalid indexes are used to access the free lists. Reports are not common but at least two users and 0-day have tripped over them. There is a chance that one of the syzbot reports are related but it has not been confirmed properly. The normal submission path is with Andrew but there have been some delays and I consider them urgent enough that they should be picked up before RC4 to avoid duplicate reports. All of these have been successfully tested on older RC windows. This will make this branch look like a rebase but in fact, they've simply been lifted again from Andrew's tree and placed on a fresh branch. I've no reason to believe that this has invalidated the testing given the lack of change in compaction and the nature of the fixes" * tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux: mm/compaction.c: abort search if isolation fails mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
-
Greg Kroah-Hartman authored
The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Pretty quiet week, just some amdgpu and i915 fixes. i915: - deadlock fix - gvt fixes amdgpu: - PCIE dpm feature fix - Powerplay fixes" * tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm: drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug drm/i915/gvt: Correct the calculation of plane size drm/amdgpu: remove unnecessary rlc reset function on gfx9 drm/i915: Always backoff after a drm_modeset_lock() deadlock drm/i915/gvt: do not let pin count of shadow mm go negative drm/i915/gvt: do not deliver a workload if its creation fails drm/amd/display: VBIOS can't be light up HDMI when restart system drm/amd/powerplay: fix possible hang with 3+ 4K monitors drm/amd/powerplay: correct data type to avoid overflow drm/amd/powerplay: add ECC feature bit drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several hash table refcount fixes in batman-adv, from Sven Eckelmann. 2) Use after free in bpf_evict_inode(), from Daniel Borkmann. 3) Fix mdio bus registration in ixgbe, from Ivan Vecera. 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni. 5) ila rhashtable corruption fix from Herbert Xu. 6) Don't allow upper-devices to be added to vrf devices, from Sabrina Dubroca. 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork. 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype, from Alexander Lobakin. 9) Missing IDR checks in mlx5 driver, from Aditya Pakki. 10) Fix false connection termination in ktls, from Jakub Kicinski. 11) Work around some ASPM issues with r8169 by disabling rx interrupt coalescing on certain chips. From Heiner Kallweit. 12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo Abeni. 13) Fully initialize sockaddr_in structures in SCTP, from Xin Long. 14) Various BPF flow dissector fixes from Stanislav Fomichev. 15) Divide by zero in act_sample, from Davide Caratti. 16) Fix bridging multicast regression introduced by rhashtable conversion, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) ibmvnic: Fix completion structure initialization ipv6: sit: reset ip header pointer in ipip6_rcv net: bridge: always clear mcast matching struct on reports and leaves libcxgb: fix incorrect ppmax calculation vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x sch_cake: Make sure we can write the IP header before changing DSCP bits sch_cake: Use tc_skb_protocol() helper for getting packet protocol tcp: Ensure DCTCP reacts to losses net/sched: act_sample: fix divide by zero in the traffic path net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop net: hns: Fix sparse: some warnings in HNS drivers net: hns: Fix WARNING when remove HNS driver with SMMU enabled net: hns: fix ICMP6 neighbor solicitation messages discard problem net: hns: Fix probabilistic memory overwrite when HNS driver initialized net: hns: Use NAPI_POLL_WEIGHT for hns driver net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() flow_dissector: rst'ify documentation ipv6: Fix dangling pointer when ipv6 fragment net-gro: Fix GRO flush when receiving a GSO packet. flow_dissector: document BPF flow dissector environment ... -
Thomas Falcon authored
Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Lorenzo Bianconi authored
ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Tested-by:Jianlin Shi <jishi@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
David S. Miller authored
Tuong Lien says: ==================== tipc: improve TIPC unicast link throughput The series introduces an algorithm to improve TIPC throughput especially in terms of packet loss, also tries to reduce packet duplication due to overactive NACK sending mechanism. The link failover situation is also covered by the patches. ==================== Signed-off-by: -
Tuong Lien authored
In commit 0ae955e2656d ("tipc: improve TIPC throughput by Gap ACK blocks"), we enhance the link transmq by releasing as many packets as possible with the multi-ACKs from peer node. This also means the queue is now non-linear and the peer link deferdq becomes vital. Whereas, in the case of link failover, all messages in the link transmq need to be transmitted as tunnel messages in such a way that message sequentiality and cardinality per sender is preserved. This requires us to maintain the link deferdq somehow, so that when the tunnel messages arrive, the inner user messages along with the ones in the deferdq will be delivered to upper layer correctly. The commit accomplishes this by defining a new queue in the TIPC link structure to hold the old link deferdq when link failover happens and process it upon receipt of tunnel messages. Also, in the case of link syncing, the link deferdq will not be purged to avoid unnecessary retransmissions that in the worst case will fail because the packets might have been freed on the sending side. Acked-by:Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Tuong Lien authored
For unicast transmission, the current NACK sending althorithm is over- active that forces the sending side to retransmit a packet that is not really lost but just arrived at the receiving side with some delay, or even retransmit same packets that have already been retransmitted before. As a result, many duplicates are observed also under normal condition, ie. without packet loss. One example case is: node1 transmits 1 2 3 4 10 5 6 7 8 9, when node2 receives packet #10, it puts into the deferdq. When the packet #5 comes it sends NACK with gap [6 - 9]. However, shortly after that, when packet #6 arrives, it pulls out packet #10 from the deferfq, but it is still out of order, so it makes another NACK with gap [7 - 9] and so on ... Finally, node1 has to retransmit the packets 5 6 7 8 9 a number of times, but in fact all the packets are not lost at all, so duplicates! This commit reduces duplicates by changing the condition to send NACK, also restricting the retransmissions on individual packets via a timer of about 1ms. However, it also needs to say that too tricky condition for NACKs or too long timeout value for retransmissions will result in performance reducing! The criterias in this commit are found to be effective for both the requirements to reduce duplicates but not affect performance. The tipc_link_rcv() is also improved to only dequeue skb from the link deferdq if it is expected (ie. its seqno <= rcv_nxt). Acked-by:
-
Tuong Lien authored
During unicast link transmission, it's observed very often that because of one or a few lost/dis-ordered packets, the sending side will fastly reach the send window limit and must wait for the packets to be arrived at the receiving side or in the worst case, a retransmission must be done first. The sending side cannot release a lot of subsequent packets in its transmq even though all of them might have already been received by the receiving side. That is, one or two packets dis-ordered/lost and dozens of packets have to wait, this obviously reduces the overall throughput! This commit introduces an algorithm to overcome this by using "Gap ACK blocks". Basically, a Gap ACK block will consist of <ack, gap> numbers that describes the link deferdq where packets have been got by the receiving side but with gaps, for example: link deferdq: [1 2 3 4 10 11 13 14 15 20] --> Gap ACK blocks: <4, 5>, <11, 1>, <15, 4>, <20, 0> The Gap ACK blocks will be sent to the sending side along with the traditional ACK or NACK message. Immediately when receiving the message the sending side will now not only release from its transmq the packets ack-ed by the ACK but also by the Gap ACK blocks! So, more packets can be enqueued and transmitted. In addition, the sending side can now do "multi-retransmissions" according to the Gaps reported in the Gap ACK blocks. The new algorithm as verified helps greatly improve the TIPC throughput especially under packet loss condition. So far, a maximum of 32 blocks is quite enough without any "Too few Gap ACK blocks" reports with a 5.0% packet loss rate, however this number can be increased in the furture if needed. Also, the patch is backward compatible. Acked-by: -
Linus Torvalds authored
Merge tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "I dropped the ball a bit here: these patches should all probably have been part of rc2, but I wanted to get around to properly testing them in the various configurations (qemu32, qeum64, unleashed) first. Unfortunately I've been traveling and didn't have time to actually do that, but since these fix concrete bugs and pass my old set of tests I don't want to delay the fixes any longer. There are four independent fixes here: - A fix for the rv32 port that corrects the 64-bit user accesor's fixup label address. - A fix for a regression introduced during the merge window that broke medlow configurations at run time. This patch also includes a fix that disables ftrace for the same set of functions, which was found by inspection at the same time. - A modification of the memory map to avoid overlapping the FIXMAP and VMALLOC regions on systems with small memory maps. - A fix to the module handling code to use the correct syntax for probing Kconfig entries. These have passed my standard test flow, but I didn't have time to expand that testing like I said I would" * tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW) RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area RISC-V: Always compile mm/init.c with cmodel=medany and notrace riscv: fix accessing 8-byte variable from RV32
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: use generic PHY ability readers if callback get_features isn't set Meanwhile we have generic functions for reading the abilities of Clause 22 / 45 PHY's. This allows to use them as fallback in case callback get_features isn't set. Benefit is the reduction of boilerplate code in PHY drivers. v2: - adjust a comment in patch 1 to match the code ==================== Signed-off-by: -
Heiner Kallweit authored
Now that phylib uses genphy_read_abilities() as fallback, we don't have to set callback get_features any longer. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Heiner Kallweit authored
Meanwhile we have generic functions for reading the abilities of Clause 22 / 45 PHY's. This allows to use them as fallback in case callback get_features isn't set. Benefit is the reduction of boilerplate code in PHY drivers. v2: - adjust the comment in phy_driver_register to match the code Signed-off-by:
-
Nikolay Aleksandrov authored
Since the mcast conversion to rhashtable this function has been unused, so remove it. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We need to be careful and always zero the whole br_ip struct when it is used for matching since the rhashtable change. This patch fixes all the places which didn't properly clear it which in turn might've caused mismatches. Thanks for the great bug report with reproducing steps and bisection. Steps to reproduce (from the bug report): ip link add br0 type bridge mcast_querier 1 ip link set br0 up ip link add v2 type veth peer name v3 ip link set v2 master br0 ip link set v2 up ip link set v3 up ip addr add 3.0.0.2/24 dev v3 ip netns add test ip link add v1 type veth peer name v1 netns test ip link set v1 master br0 ip link set v1 up ip -n test link set v1 up ip -n test addr add 3.0.0.1/24 dev v1 # Multicast receiver ip netns exec test socat UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork - # Multicast sender echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588 Reported-by: liam.mcbirnie@boeing.com Fixes: 19e3a9c9 ("net: bridge: convert multicast to generic rhashtable") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix up the intel_pstate driver after recent changes to prevent it from printing pointless messages and update the turbostat utility (mostly fixes and new hardware support). Specifics: - Make intel_pstate only load on Intel processors and prevent it from printing pointless failure messages (Borislav Petkov). - Update the turbostat utility: * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava). * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin Walton). * Support for Intel Icelake and for systems with more than one die per package (Len Brown). * Cleanups (Len Brown)" * tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/intel_pstate: Load only on Intel hardware tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Prevent stale GPE events from triggering spurious system wakeups from suspend-to-idle (Furquan Shaikh)" * tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of GPEs before enabling them
-
Heiner Kallweit authored
This reverts commit 6578229d. netif_receive_skb_list() doesn't support GRO, therefore we may have scenarios with decreased performance. See discussion here [0]. [0] https://marc.info/?t=155403847400001&r=1&w=2Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-04-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only one fix for DSC (backoff after drm_modeset_lock deadlock) and GVT's fixes including vGPU display plane size calculation, shadow mm pin count, error recovery path for workload create and one kerneldoc fix. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
-
Linux currently disable ECN for incoming connections when the SYN requests ECN and the IP header has ECT(0)/ECT(1) set, as some networks were reportedly mangling the ToS byte, hence could later trigger false congestion notifications. RFC8311 §4.3 relaxes RFC3168's requirements such that ECT can be set one TCP control packets (including SYNs). The main benefit of this is the decreased probability of losing a SYN in a congested ECN-capable network (i.e., it avoids the initial 1s timeout). Additionally, this allows the development of newer TCP extensions, such as AccECN. This patch relaxes the previous check, by enabling ECN on incoming connections using SYN+ECT if at least one bit of the reserved flags of the TCP header is set. Such bit would indicate that the sender of the SYN is using a newer TCP feature than what the host implements, such as AccECN, and is thus implementing RFC8311. This enables end-hosts not supporting such extensions to still negociate ECN, and to have some of the benefits of using ECN on control packets. Signed-off-by:
Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Suggested-by:
Bob Briscoe <research@bobbriscoe.net> Cc: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfd fixes from Lee Jones: - Fix failed reads due to enabled IRQs when suspended; twl-core - Fix driver registration when using DT; sprd-sc27xx-spi - Fix `make allyesconfig` on x86_64; SUN6I_PRCM * tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: sun6i-prcm: Allow to compile with COMPILE_TEST mfd: sc27xx: Use SoC compatible string for PMIC devices mfd: twl-core: Disable IRQ while suspended
-
David S. Miller authored
Jiri Pirko says: ==================== net: extend devlink port attrs with switch ID Extend devlink port attrs to contain switch ID and change drivers that register devlink ports to use that. ==================== Signed-off-by: -
Jiri Pirko authored
Currently if the driver registers devlink port instance, he should set the devlink port attributes as well. Then the devlink core is able to obtain switch id itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Leave ndo_get_port_parent_id implementation only for legacy. Signed-off-by:
-
Jiri Pirko authored
Obtain HW id and pass it down to mlxsw_core_port_init() as it would be used as switch_id in devlink and exposed to user. Signed-off-by:
-
Jiri Pirko authored
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jiri Pirko authored
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by:
-
Jiri Pirko authored
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by:
-
Jiri Pirko authored
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by:
-
Jiri Pirko authored
Currently the switch_id is being only initialized when switching eswitch mode from "legacy" to "switchdev". However, nothing prevents the id to be initialized from the very beginning. Physical ports can show it even in "legacy" mode. Signed-off-by:
-
