Skip to content

L
linux
Switch branch/tag
  1. 18 Jan, 2020 1 commit
  3. 17 Jan, 2020 8 commits
    • Florian Fainelli's avatar
      net: systemport: Fixed queue mapping in internal ring map · 5a9ef194
      Florian Fainelli authored 
      We would not be transmitting using the correct SYSTEMPORT transmit queue
during ndo_select_queue() which looks up the internal TX ring map
because while establishing the mapping we would be off by 4, so for
instance, when we populate switch port mappings we would be doing:

switch port 0, queue 0 -> ring index #0
switch port 0, queue 1 -> ring index #1
...
switch port 0, queue 3 -> ring index #3
switch port 1, queue 0 -> ring index #8 (4 + 4 * 1)
...

instead of using ring index #4. This would cause our ndo_select_queue()
to use the fallback queue mechanism which would pick up an incorrect
ring for that switch port. Fix this by using the correct switch queue
number instead of SYSTEMPORT queue number.

Fixes: 25c44070 ("net: systemport: Simplify queue mapping logic")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a9ef194
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec · 8f1880cb
      Florian Fainelli authored 
      With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.

Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f1880cb
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Don't error out on disabled ports with no phy-mode · 27afe0d3
      Vladimir Oltean authored 
      The sja1105_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.

Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27afe0d3
    • Michael Grzeschik's avatar
      net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset · 86ffe920
      Michael Grzeschik authored 
      According to the Datasheet this bit should be 0 (Normal operation) in
default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
link. This patch sets FORCE_LINK_GOOD to the default value after
resetting the phy.
Signed-off-by: default avatarMichael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      86ffe920
    • Yonglong Liu's avatar
      net: hns: fix soft lockup when there is not enough memory · 49edd6a2
      Yonglong Liu authored 
      When there is not enough memory and napi_alloc_skb() return NULL,
the HNS driver will print error message, and than try again, if
the memory is not enough for a while, huge error message and the
retry operation will cause soft lockup.

When napi_alloc_skb() return NULL because of no memory, we can
get a warn_alloc() call trace, so this patch deletes the error
message. We already use polling mode to handle irq, but the
retry operation will render the polling weight inactive, this
patch just return budget when the rx is not completed to avoid
dead loop.

Fixes: 36eedfde ("net: hns: Optimize hns_nic_common_poll for better performance")
Fixes: b5996f11 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49edd6a2
    • Cong Wang's avatar
      net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() · 53d37497
      Cong Wang authored 
      syzbot reported some bogus lockdep warnings, for example bad unlock
balance in sch_direct_xmit(). They are due to a race condition between
slow path and fast path, that is qdisc_xmit_lock_key gets re-registered
in netdev_update_lockdep_key() on slow path, while we could still
acquire the queue->_xmit_lock on fast path in this small window:

CPU A						CPU B
						__netif_tx_lock();
lockdep_unregister_key(qdisc_xmit_lock_key);
						__netif_tx_unlock();
lockdep_register_key(qdisc_xmit_lock_key);

In fact, unlike the addr_list_lock which has to be reordered when
the master/slave device relationship changes, queue->_xmit_lock is
only acquired on fast path and only when NETIF_F_LLTX is not set,
so there is likely no nested locking for it.

Therefore, we can just get rid of re-registration of
qdisc_xmit_lock_key.

Reported-by: syzbot+4ec99438ed7450da6272@syzkaller.appspotmail.com
Fixes: ab92d68f ("net: core: add generic lockdep keys")
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Acked-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      53d37497
    • Eric Dumazet's avatar
      net/sched: act_ife: initalize ife->metalist earlier · 44c23d71
      Eric Dumazet authored 
      It seems better to init ife->metalist earlier in tcf_ife_init()
to avoid the following crash :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 10483 Comm: syz-executor216 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:_tcf_ife_cleanup net/sched/act_ife.c:412 [inline]
RIP: 0010:tcf_ife_cleanup+0x6e/0x400 net/sched/act_ife.c:431
Code: 48 c1 ea 03 80 3c 02 00 0f 85 94 03 00 00 49 8b bd f8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 67 e8 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5c 03 00 00 48 bb 00 00 00 00 00 fc ff df 48 8b
RSP: 0018:ffffc90001dc6d00 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff864619c0 RCX: ffffffff815bfa09
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000
RBP: ffffc90001dc6d50 R08: 0000000000000004 R09: fffff520003b8d8e
R10: fffff520003b8d8d R11: 0000000000000003 R12: ffffffffffffffe8
R13: ffff8880a79fc000 R14: ffff88809aba0e00 R15: 0000000000000000
FS:  0000000001b51880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563f52cce140 CR3: 0000000093541000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tcf_action_cleanup+0x62/0x1b0 net/sched/act_api.c:119
 __tcf_action_put+0xfa/0x130 net/sched/act_api.c:135
 __tcf_idr_release net/sched/act_api.c:165 [inline]
 __tcf_idr_release+0x59/0xf0 net/sched/act_api.c:145
 tcf_idr_release include/net/act_api.h:171 [inline]
 tcf_ife_init+0x97c/0x1870 net/sched/act_ife.c:616
 tcf_action_init_1+0x6b6/0xa40 net/sched/act_api.c:944
 tcf_action_init+0x21a/0x330 net/sched/act_api.c:1000
 tcf_action_add+0xf5/0x3b0 net/sched/act_api.c:1410
 tc_ctl_action+0x390/0x488 net/sched/act_api.c:1465
 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 ____sys_sendmsg+0x753/0x880 net/socket.c:2330
 ___sys_sendmsg+0x100/0x170 net/socket.c:2384
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg net/socket.c:2424 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 11a94d7f ("net/sched: act_ife: validate the control action inside init()")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: default avatarDavide Caratti <dcaratti@redhat.com>
Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      44c23d71
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · a72b6a1e
      David S. Miller authored 
      Pablo Neira Ayuso says:

====================
Netfilter updates for net

The following patchset contains Netfilter fixes for net:

1) Fix use-after-free in ipset bitmap destroy path, from Cong Wang.

2) Missing init netns in entry cleanup path of arp_tables,
   from Florian Westphal.

3) Fix WARN_ON in set destroy path due to missing cleanup on
   transaction error.

4) Incorrect netlink sanity check in tunnel, from Florian Westphal.

5) Missing sanity check for erspan version netlink attribute, also
   from Florian.

6) Remove WARN in nft_request_module() that can be triggered from
   userspace, from Florian Westphal.

7) Memleak in NFTA_HOOK_DEVS netlink parser, from Dan Carpenter.

8) List poison from commit path for flowtables that are added and
   deleted in the same batch, from Florian Westphal.

9) Fix NAT ICMP packet corruption, from Eyal Birger.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a72b6a1e
  5. 16 Jan, 2020 14 commits
  7. 15 Jan, 2020 17 commits
    • Daniel Borkmann's avatar
      Merge branch 'bpf-sockmap-tls-fixes' · 85ddd9c3
      Daniel Borkmann authored 
      John Fastabend says:

====================
To date our usage of sockmap/tls has been fairly simple, the BPF programs
did only well-defined pop, push, pull and apply/cork operations.

Now that we started to push more complex programs into sockmap we uncovered
a series of issues addressed here. Further OpenSSL3.0 version should be
released soon with kTLS support so its important to get any remaining
issues on BPF and kTLS support resolved.

Additionally, I have a patch under development to allow sockmap to be
enabled/disabled at runtime for Cilium endpoints. This allows us to stress
the map insert/delete with kTLS more than previously where Cilium only
added the socket to the map when it entered ESTABLISHED state and never
touched it from the control path side again relying on the sockets own
close() hook to remove it.

To test I have a set of test cases in test_sockmap.c that expose these
issues. Once we get fixes here merged and in bpf-next I'll submit the
tests to bpf-next tree to ensure we don't regress again. Also I've run
these patches in the Cilium CI with OpenSSL (master branch) this will
run tools such as netperf, ab, wrk2, curl, etc. to get a broad set of
testing.

I'm aware of two more issues that we are working to resolve in another
couple (probably two) patches. First we see an auth tag corruption in
kTLS when sending small 1byte chunks under stress. I've not pinned this
down yet. But, guessing because its under 1B stress tests it must be
some error path being triggered. And second we need to ensure BPF RX
programs are not skipped when kTLS ULP is loaded. This breaks some of the
sockmap selftests when running with kTLS. I'll send a follow up for this.

v2: I dropped a patch that added !0 size check in tls_push_record
    this originated from a panic I caught awhile ago with a trace
    in the crypto stack. But I can not reproduce it anymore so will
    dig into that and send another patch later if needed. Anyways
    after a bit of thought it would be nicer if tls/crypto/bpf didn't
    require special case handling for the !0 size.
====================
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      85ddd9c3
    • John Fastabend's avatar
      bpf: Sockmap/tls, fix pop data with SK_DROP return code · 7361d448
      John Fastabend authored 
      When user returns SK_DROP we need to reset the number of copied bytes
to indicate to the user the bytes were dropped and not sent. If we
don't reset the copied arg sendmsg will return as if those bytes were
copied giving the user a positive return value.

This works as expected today except in the case where the user also
pops bytes. In the pop case the sg.size is reduced but we don't correctly
account for this when copied bytes is reset. The popped bytes are not
accounted for and we return a small positive value potentially confusing
the user.

The reason this happens is due to a typo where we do the wrong comparison
when accounting for pop bytes. In this fix notice the if/else is not
needed and that we have a similar problem if we push data except its not
visible to the user because if delta is larger the sg.size we return a
negative value so it appears as an error regardless.

Fixes: 7246d8ed ("bpf: helper to pop data from messages")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-9-john.fastabend@gmail.com
      7361d448
    • John Fastabend's avatar
      bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining · 9aaaa568
      John Fastabend authored 
      Its possible through a set of push, pop, apply helper calls to construct
a skmsg, which is just a ring of scatterlist elements, with the start
value larger than the end value. For example,

      end       start
  |_0_|_1_| ... |_n_|_n+1_|

Where end points at 1 and start points and n so that valid elements is
the set {n, n+1, 0, 1}.

Currently, because we don't build the correct chain only {n, n+1} will
be sent. This adds a check and sg_chain call to correctly submit the
above to the crypto and tls send path.

Fixes: d3b18ad3 ("tls: add bpf support to sk_msg handling")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-8-john.fastabend@gmail.com
      9aaaa568
    • John Fastabend's avatar
      bpf: Sockmap/tls, tls_sw can create a plaintext buf > encrypt buf · d468e477
      John Fastabend authored 
      It is possible to build a plaintext buffer using push helper that is larger
than the allocated encrypt buffer. When this record is pushed to crypto
layers this can result in a NULL pointer dereference because the crypto
API expects the encrypt buffer is large enough to fit the plaintext
buffer. Kernel splat below.

To resolve catch the cases this can happen and split the buffer into two
records to send individually. Unfortunately, there is still one case to
handle where the split creates a zero sized buffer. In this case we merge
the buffers and unmark the split. This happens when apply is zero and user
pushed data beyond encrypt buffer. This fixes the original case as well
because the split allocated an encrypt buffer larger than the plaintext
buffer and the merge simply moves the pointers around so we now have
a reference to the new (larger) encrypt buffer.

Perhaps its not ideal but it seems the best solution for a fixes branch
and avoids handling these two cases, (a) apply that needs split and (b)
non apply case. The are edge cases anyways so optimizing them seems not
necessary unless someone wants later in next branches.

[  306.719107] BUG: kernel NULL pointer dereference, address: 0000000000000008
[...]
[  306.747260] RIP: 0010:scatterwalk_copychunks+0x12f/0x1b0
[...]
[  306.770350] Call Trace:
[  306.770956]  scatterwalk_map_and_copy+0x6c/0x80
[  306.772026]  gcm_enc_copy_hash+0x4b/0x50
[  306.772925]  gcm_hash_crypt_remain_continue+0xef/0x110
[  306.774138]  gcm_hash_crypt_continue+0xa1/0xb0
[  306.775103]  ? gcm_hash_crypt_continue+0xa1/0xb0
[  306.776103]  gcm_hash_assoc_remain_continue+0x94/0xa0
[  306.777170]  gcm_hash_assoc_continue+0x9d/0xb0
[  306.778239]  gcm_hash_init_continue+0x8f/0xa0
[  306.779121]  gcm_hash+0x73/0x80
[  306.779762]  gcm_encrypt_continue+0x6d/0x80
[  306.780582]  crypto_gcm_encrypt+0xcb/0xe0
[  306.781474]  crypto_aead_encrypt+0x1f/0x30
[  306.782353]  tls_push_record+0x3b9/0xb20 [tls]
[  306.783314]  ? sk_psock_msg_verdict+0x199/0x300
[  306.784287]  bpf_exec_tx_verdict+0x3f2/0x680 [tls]
[  306.785357]  tls_sw_sendmsg+0x4a3/0x6a0 [tls]

test_sockmap test signature to trigger bug,

[TEST]: (1, 1, 1, sendmsg, pass,redir,start 1,end 2,pop (1,2),ktls,):

Fixes: d3b18ad3 ("tls: add bpf support to sk_msg handling")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-7-john.fastabend@gmail.com
      d468e477
    • John Fastabend's avatar
      bpf: Sockmap/tls, msg_push_data may leave end mark in place · cf21e9ba
      John Fastabend authored 
      Leaving an incorrect end mark in place when passing to crypto
layer will cause crypto layer to stop processing data before
all data is encrypted. To fix clear the end mark on push
data instead of expecting users of the helper to clear the
mark value after the fact.

This happens when we push data into the middle of a skmsg and
have room for it so we don't do a set of copies that already
clear the end flag.

Fixes: 6fff607e ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-6-john.fastabend@gmail.com
      cf21e9ba
    • John Fastabend's avatar
      bpf: Sockmap, skmsg helper overestimates push, pull, and pop bounds · 6562e29c
      John Fastabend authored 
      In the push, pull, and pop helpers operating on skmsg objects to make
data writable or insert/remove data we use this bounds check to ensure
specified data is valid,

 /* Bounds checks: start and pop must be inside message */
 if (start >= offset + l || last >= msg->sg.size)
     return -EINVAL;

The problem here is offset has already included the length of the
current element the 'l' above. So start could be past the end of
the scatterlist element in the case where start also points into an
offset on the last skmsg element.

To fix do the accounting slightly different by adding the length of
the previous entry to offset at the start of the iteration. And
ensure its initialized to zero so that the first iteration does
nothing.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Fixes: 6fff607e ("bpf: sk_msg program helper bpf_msg_push_data")
Fixes: 7246d8ed ("bpf: helper to pop data from messages")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-5-john.fastabend@gmail.com
      6562e29c
    • John Fastabend's avatar
      bpf: Sockmap/tls, push write_space updates through ulp updates · 33bfe20d
      John Fastabend authored 
      When sockmap sock with TLS enabled is removed we cleanup bpf/psock state
and call tcp_update_ulp() to push updates to TLS ULP on top. However, we
don't push the write_space callback up and instead simply overwrite the
op with the psock stored previous op. This may or may not be correct so
to ensure we don't overwrite the TLS write space hook pass this field to
the ULP and have it fixup the ctx.

This completes a previous fix that pushed the ops through to the ULP
but at the time missed doing this for write_space, presumably because
write_space TLS hook was added around the same time.

Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Acked-by: default avatarJonathan Lemon <jonathan.lemon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
      33bfe20d
    • John Fastabend's avatar
      bpf: Sockmap, ensure sock lock held during tear down · 7e81a353
      John Fastabend authored 
      The sock_map_free() and sock_hash_free() paths used to delete sockmap
and sockhash maps walk the maps and destroy psock and bpf state associated
with the socks in the map. When done the socks no longer have BPF programs
attached and will function normally. This can happen while the socks in
the map are still "live" meaning data may be sent/received during the walk.

Currently, though we don't take the sock_lock when the psock and bpf state
is removed through this path. Specifically, this means we can be writing
into the ops structure pointers such as sendmsg, sendpage, recvmsg, etc.
while they are also being called from the networking side. This is not
safe, we never used proper READ_ONCE/WRITE_ONCE semantics here if we
believed it was safe. Further its not clear to me its even a good idea
to try and do this on "live" sockets while networking side might also
be using the socket. Instead of trying to reason about using the socks
from both sides lets realize that every use case I'm aware of rarely
deletes maps, in fact kubernetes/Cilium case builds map at init and
never tears it down except on errors. So lets do the simple fix and
grab sock lock.

This patch wraps sock deletes from maps in sock lock and adds some
annotations so we catch any other cases easier.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-3-john.fastabend@gmail.com
      7e81a353
    • John Fastabend's avatar
      bpf: Sockmap/tls, during free we may call tcp_bpf_unhash() in loop · 4da6a196
      John Fastabend authored 
      When a sockmap is free'd and a socket in the map is enabled with tls
we tear down the bpf context on the socket, the psock struct and state,
and then call tcp_update_ulp(). The tcp_update_ulp() call is to inform
the tls stack it needs to update its saved sock ops so that when the tls
socket is later destroyed it doesn't try to call the now destroyed psock
hooks.

This is about keeping stacked ULPs in good shape so they always have
the right set of stacked ops.

However, recently unhash() hook was removed from TLS side. But, the
sockmap/bpf side is not doing any extra work to update the unhash op
when is torn down instead expecting TLS side to manage it. So both
TLS and sockmap believe the other side is managing the op and instead
no one updates the hook so it continues to point at tcp_bpf_unhash().
When unhash hook is called we call tcp_bpf_unhash() which detects the
psock has already been destroyed and calls sk->sk_prot_unhash() which
calls tcp_bpf_unhash() yet again and so on looping and hanging the core.

To fix have sockmap tear down logic fixup the stale pointer.

Fixes: 5d92e631 ("net/tls: partially revert fix transition through disconnect with close")
Reported-by: syzbot+83979935eb6304f8cd46@syzkaller.appspotmail.com
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20200111061206.8028-2-john.fastabend@gmail.com
      4da6a196
    • David S. Miller's avatar
      Merge branch 'stmmac-Fix-selftests-in-Synopsys-AXS101-board' · 567110f1
      David S. Miller authored 
      Jose Abreu says:

====================
net: stmmac: Fix selftests in Synopsys AXS101 board

Set of fixes for sefltests so that they work in Synopsys AXS101 board.

Final output:

$ ethtool -t eth0
The test result is PASS
The test extra info:
 1. MAC Loopback                 0
 2. PHY Loopback                 -95
 3. MMC Counters                 0
 4. EEE                          -95
 5. Hash Filter MC               0
 6. Perfect Filter UC            0
 7. MC Filter                    0
 8. UC Filter                    0
 9. Flow Control                 -95
10. RSS                          -95
11. VLAN Filtering               -95
12. VLAN Filtering (perf)        -95
13. Double VLAN Filter           -95
14. Double VLAN Filter (perf)    -95
15. Flexible RX Parser           -95
16. SA Insertion (desc)          -95
17. SA Replacement (desc)        -95
18. SA Insertion (reg)           -95
19. SA Replacement (reg)         -95
20. VLAN TX Insertion            -95
21. SVLAN TX Insertion           -95
22. L3 DA Filtering              -95
23. L3 SA Filtering              -95
24. L4 DA TCP Filtering          -95
25. L4 SA TCP Filtering          -95
26. L4 DA UDP Filtering          -95
27. L4 SA UDP Filtering          -95
28. ARP Offload                  -95
29. Jumbo Frame                  0
30. Multichannel Jumbo           -95
31. Split Header                 -95

Description:

1) Fixes the unaligned accesses that caused CPU halt in Synopsys AXS101
boards.

2) Fixes the VLAN tests when filtering failed to work.

3) Fixes the VLAN Perfect tests when filtering is not available in HW.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      567110f1
    • Jose Abreu's avatar
      net: stmmac: selftests: Guard VLAN Perfect test against non supported HW · 4eee13f1
      Jose Abreu authored 
      When HW does not support perfect filtering the feature will not be
enabled in the net_device. Add a check for this to prevent failures.

Fixes: 1b2250a0 ("net: stmmac: selftests: Add tests for VLAN Perfect Filtering")
Signed-off-by: default avatarJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4eee13f1
    • Jose Abreu's avatar
      net: stmmac: selftests: Mark as fail when received VLAN ID != expected · d39b68e5
      Jose Abreu authored 
      When the VLAN ID does not match the expected one it means filter failed
in HW. Fix it.

Fixes: 94e18382 ("net: stmmac: selftests: Add selftest for VLAN TX Offload")
Signed-off-by: default avatarJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d39b68e5
    • Jose Abreu's avatar
      net: stmmac: selftests: Make it work in Synopsys AXS101 boards · 0b9f932e
      Jose Abreu authored 
      Synopsys AXS101 boards do not support unaligned memory loads or stores.
Change the selftests mechanism to explicity:
- Not add extra alignment in TX SKB
- Use the unaligned version of ether_addr_equal()

Fixes: 091810db ("net: stmmac: Introduce selftests support")
Signed-off-by: default avatarJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b9f932e
    • Colin Ian King's avatar
      net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_info · ddf42039
      Colin Ian King authored 
      Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements
however up to UCC_MAX_NUM (8) elements are potentially being written
to it.  Currently we have an array out-of-bounds write error on the
last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in
size.

Addresses-Coverity: ("Out-of-bounds write")
Fixes: c19b6d24 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ddf42039
    • David S. Miller's avatar
      Merge tag 'batadv-net-for-davem-20200114' of git://git.open-mesh.org/linux-merge · 5a40420e
      David S. Miller authored 
      Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - Fix DAT candidate selection on little endian systems,
   by Sven Eckelmann
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a40420e
    • Daniel Borkmann's avatar
      bpf: Fix incorrect verifier simulation of ARSH under ALU32 · 0af2ffc9
      Daniel Borkmann authored 
      Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (85) call bpf_get_socket_cookie#46
  1: R0_w=invP(id=0) R10=fp0
  1: (57) r0 &= 808464432
  2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
  2: (14) w0 -= 810299440
  3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
  3: (c4) w0 s>>= 1
  4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
  4: (76) if w0 s>= 0x30303030 goto pc+216
  221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
  221: (95) exit
  processed 6 insns (limit 1000000) [...]

Taking a closer look, the program was xlated as follows:

  # ./bpftool p d x i 12
  0: (85) call bpf_get_socket_cookie#7800896
  1: (bf) r6 = r0
  2: (57) r6 &= 808464432
  3: (14) w6 -= 810299440
  4: (c4) w6 s>>= 1
  5: (76) if w6 s>= 0x30303030 goto pc+216
  6: (05) goto pc-1
  7: (05) goto pc-1
  8: (05) goto pc-1
  [...]
  220: (05) goto pc-1
  221: (05) goto pc-1
  222: (95) exit

Meaning, the visible effect is very similar to f54c7898 ("bpf: Fix
precision tracking for unbounded scalars"), that is, the fall-through
branch in the instruction 5 is considered to be never taken given the
conclusion from the min/max bounds tracking in w6, and therefore the
dead-code sanitation rewrites it as goto pc-1. However, real-life input
disagrees with verification analysis since a soft-lockup was observed.

The bug sits in the analysis of the ARSH. The definition is that we shift
the target register value right by K bits through shifting in copies of
its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the
register into 32 bit mode, same happens after simulating the operation.
However, for the case of simulating the actual ARSH, we don't take the
mode into account and act as if it's always 64 bit, but location of sign
bit is different:

  dst_reg->smin_value >>= umin_val;
  dst_reg->smax_value >>= umin_val;
  dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val);

Consider an unknown R0 where bpf_get_socket_cookie() (or others) would
for example return 0xffff. With the above ARSH simulation, we'd see the
following results:

  [...]
  1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0
  1: (85) call bpf_get_socket_cookie#46
  2: R0_w=invP(id=0) R10=fp0
  2: (57) r0 &= 808464432
    -> R0_runtime = 0x3030
  3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
  3: (14) w0 -= 810299440
    -> R0_runtime = 0xcfb40000
  4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
                              (0xffffffff)
  4: (c4) w0 s>>= 1
    -> R0_runtime = 0xe7da0000
  5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
                              (0x67c00000)           (0x7ffbfff8)
  [...]

In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011
0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that
is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly
retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into
0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000'
and means here that the simulation didn't retain the sign bit. With above
logic, the updates happen on the 64 bit min/max bounds and given we coerced
the register, the sign bits of the bounds are cleared as well, meaning, we
need to force the simulation into s32 space for 32 bit alu mode.

Verification after the fix below. We're first analyzing the fall-through branch
on 32 bit signed >= test eventually leading to rejection of the program in this
specific case:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r2 = 808464432
  1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0
  1: (85) call bpf_get_socket_cookie#46
  2: R0_w=invP(id=0) R10=fp0
  2: (bf) r6 = r0
  3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0
  3: (57) r6 &= 808464432
  4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
  4: (14) w6 -= 810299440
  5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
  5: (c4) w6 s>>= 1
  6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
                                              (0x67c00000)          (0xfffbfff8)
  6: (76) if w6 s>= 0x30303030 goto pc+216
  7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
  7: (30) r0 = *(u8 *)skb[808464432]
  BPF_LD_[ABS|IND] uses reserved fields
  processed 8 insns (limit 1000000) [...]

Fixes: 9cbe1f5a ("bpf/verifier: improve register value range tracking with ARSH")
Reported-by: default avatarAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarYonghong Song <yhs@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net
      0af2ffc9
    • Mohammed Gamal's avatar
      hv_netvsc: Fix memory leak when removing rndis device · 536dc5df
      Mohammed Gamal authored 
      kmemleak detects the following memory leak when hot removing
a network device:

unreferenced object 0xffff888083f63600 (size 256):
  comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s)
  hex dump (first 32 bytes):
    00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00  .@.3............
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc]
    [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc]
    [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus]
    [<00000000046e64f1>] really_probe+0x22f/0xb50
    [<000000005cc35eb7>] driver_probe_device+0x25e/0x370
    [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0
    [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0
    [<00000000a72c362f>] bus_probe_device+0x1a6/0x260
    [<0000000008478399>] device_add+0x10a3/0x18e0
    [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus]
    [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus]
    [<000000002c94bb64>] process_one_work+0x919/0x17d0
    [<0000000096de6781>] worker_thread+0x87/0xb40
    [<00000000fbe7397e>] kthread+0x333/0x3f0
    [<000000004f844269>] ret_from_fork+0x3a/0x50

rndis_filter_device_add() allocates an instance of struct rndis_device
which never gets deallocated as rndis_filter_device_remove() sets
net_device->extension which points to the rndis_device struct to NULL,
leaving the rndis_device dangling.

Since net_device->extension is eventually freed in free_netvsc_device(),
we refrain from setting it to NULL inside rndis_filter_device_remove()
Signed-off-by: default avatarMohammed Gamal <mgamal@redhat.com>
Reviewed-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      536dc5df
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7