- 10 Jun, 2016 20 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bgmac: Misc improvements This patch series add minor changes to the bgmac driver: - properly bind net_device with its backing device structure such that we can locate the device using common helper functions - add support for ethtool statistics reading the HW MIB counters which is useful for debugging - add netdev statistics throughout the TX/RX path to know what is going on ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Add a few netdev statistics to report transmitted and received bytes and packets and a few obvious errors. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Read the statistics from the BGMAC's builtin MAC and return them to user-space using the standard ethtool helpers. Signed-off-by:
-
Florian Fainelli authored
In preparation for allowing different helpers to be utilized against network devices created by the bgmac driver, make sure that we bind the net_device with core->dev. Signed-off-by:
-
Aaron Conole authored
A draft version of the MTU Advice feature bit was specified as 25. This bit is not within the allowed range for network device feature bits, and should be changed to be feature bit 3 to fully comply with the spec. Fixes 14de9d11 ('virtio-net: Add initial MTU advice feature') Signed-off-by:
Aaron Conole <aconole@redhat.com> Suggested-by:
"Michael S. Tsirkin" <mst@redhat.com> Signed-off-by:
-
David Ahern authored
Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Howells authored
Simplify the RxRPC connect() implementation. It will just note the destination address it is given, and if a sendmsg() comes along with no address, this will be assigned as the address. No transport struct will be held internally, which will allow us to remove this later. Simplify sendmsg() also. Whilst a call is active, userspace refers to it by a private unique user ID specified in a control message. When sendmsg() sees a user ID that doesn't map to an extant call, it creates a new call for that user ID and attempts to add it. If, when we try to add it, the user ID is now registered, we now reject the message with -EEXIST. We should never see this situation unless two threads are racing, trying to create a call with the same ID - which would be an error. It also isn't required to provide sendmsg() with an address - provided the control message data holds a user ID that maps to a currently active call. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Fabien Siron authored
Signed-off-by:
Fabien Siron <fabien.siron@epita.fr> Signed-off-by:
-
Eric Dumazet authored
I am not sure mlx4_en_netpoll() is doing anything useful right now. mlx4 has different NAPI structures for RX and TX, and netpoll only wants to drain TX queues. Lets schedule NAPI polls on TX, not RX. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: Broadcom BCM53xx switches support This patch series adds support for the Broadcom BCM53xx series aka RoboSwitches. This driver is largely based on Jonas Gorski's b53 driver for OpenWrt which can be found here: https://dev.openwrt.org/browser/trunk/target/linux/generic/files/drivers/net/phy/b53 a few bug fixes and DSA-ifycation later, here is what we got. This has been successfully tested in the following configurations: - Broadcom BCM53011 using the SRAB bus layer with 4 ports LAN, 1 port WAN - A Broadcom BCM7445 device with an internal Starfighter 2 switch (bcm_sf2.c) and a Broadcom BCM53125 hanging off one of its ports connected via MDIO, creating two trees hanging off each other, and this works! - A Broadcom BCM53125 MDIO connected to a Lamobo/Bananapi R1 board using the STMMAC MDIO driver For now, we do not enable Broadcom tags, because there are different generations of switches being supported which have different tag formats, but the plan is to enable them later on. Support for different HW features will be added later: EEE, Compact Field Processor (TCAM) once this initial cut gets accepted. Testing and bug reports welcome! ==================== Signed-off-by:
-
Florian Fainelli authored
Add support for configuration VLANs on B53 devices by implementing the port VLAN add/del/dump functions. We currently default to a behavior which is equivalent to having VLAN filtering turned on, where all VLANs not programmed into the VLAN port-based vector will be discarded on ingress. Signed-off-by:
-
Florian Fainelli authored
Add support for HW bridging by tying the ports together in the same port VLAN mask when they belong to the same bridge, and isolating them to be alone with the CPU port when they are not. Propagate STP states from the bridge layer to the switch's HW mapping when requested. Signed-off-by:
-
Florian Fainelli authored
Adds support for FDB add/delete/dump using the ARL read/write logic and the ARL search logic for faster dumps. The code is made flexible enough it could support devices with a different register layout like BCM5325 and BCM5365 which have fewer number of entries or pack values into a single 64 bits register. Signed-off-by:
-
Florian Fainelli authored
The Broadcom BCM7445 STB chip has an issued in its revision D0 which was previously worked around in drivers/net/dsa/bcm_sf2.c where we may end-up double programming the integrated BCM7445 switch (bcm_sf2) and an external Broadcom switch such as BCM53125, since these are mostly register compatible. Add a small quirk which just defers probing until we are sitting on the slave DSA MDIO bus, which will allow us to intercept reads/writes and funnel them through the SF2 internal MDIO master (which happens to disconnect its pseudo PHY). Signed-off-by:
-
Florian Fainelli authored
This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: add VLAN support This is long overdue, finally add support for VLANs in the Broadcom Starfigther 2 switch driver. There are a few things that make us differ from e.g; mv88e6xxx.c: - we keep a software cache of which VLANs are enabled and which are not to dramatically speed up the VLAN dump operation, we do not have any HW operation which would only return the list of valid VLAN entries, they would have to be all queried one by one, with 4K vlans, this takes a while - the default behavior is equivalent to setting VLAN filtering to 1, still working on implementing a proper port_vlan_filtering callback, but I figured the most conservative behavior is probably okay anyway - without enabling VLANs, the default behavior is to receive any 802.1q frames (per the DSA documentation), however, once we start enabling VLAN support, if an interface leaves the bridge, we still want it to receive all 802.1q frames so we utiliez the "Join all VLAN" feature of the switch to perform that ==================== Signed-off-by: -
Florian Fainelli authored
Add support for configuring VLANs on the Broadcom Starfigther2 switch. This is all done through the bridge vlan facility just like other DSA drivers. Signed-off-by:
-
Florian Fainelli authored
Add the definitions for the VLAN registers that we are going to manipulate in subsequent patches. Signed-off-by:
-
Florian Fainelli authored
Re-order the bcm_sf2_sw_setup() function so that it is at the far end of the driver to avoid any kind of forward declarations. Signed-off-by:
-
Florian Fainelli authored
Add a helper function to fast age something that is controlled by the caller: port, VLAN. We will use this to implement a VLAN fast age operation. Signed-off-by:
-
- 09 Jun, 2016 15 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== net: better lockdep annotations Introduction of qdisc->running seqcount added lockdep false positives. While chasing the bug, it came to me that we had a lot of copies of the same stuff in virtual drivers. This patch series has the qdisc->running fix (considers that a trylock is attempted in lockdep terminology), and adds a generic helper so that we no longer have to patch many virtual drivers when a new per-device or per-qdisc lock is added. Thanks to David Ahern for reporting the issue and testing my patches :) ==================== Signed-off-by: -
Eric Dumazet authored
In case a qdisc is used on a ipvlan device, we need to use different lockdep classes to avoid false positives. Use the new netdev_lockdep_set_classes() generic helper. Signed-off-by:
-
Eric Dumazet authored
In case a qdisc is used on a macvlan device, we need to use different lockdep classes to avoid false positives. Use the new netdev_lockdep_set_classes() generic helper. Signed-off-by:
-
Eric Dumazet authored
In case a qdisc is used on a vrf device, we need to use different lockdep classes to avoid false positives. Use the new netdev_lockdep_set_classes() generic helper. Reported-by:
-
Eric Dumazet authored
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by:
-
Eric Dumazet authored
1) qdisc_run_begin() is really using the equivalent of a trylock. Instead of using write_seqcount_begin(), use a combination of raw_write_seqcount_begin() and correct lockdep annotation. 2) sch_direct_xmit() should use regular spin_lock(root_lock) Fixes: f9eb8aea ("net_sched: transform qdisc running bit into a seqcount") Signed-off-by:
-
Vitaly Kuznetsov authored
I'm hitting 5 second timeout in rndis_filter_set_rss_param() while setting RSS parameters for the device. When this happens we end up returning -ETIMEDOUT from the function and rndis_filter_device_add() falls back to setting net_device->max_chn = 1; net_device->num_chn = 1; net_device->num_sc_offered = 0; but after a moment the rndis request succeeds and subchannels start to appear. netvsc_sc_open() does unconditional nvscdev->num_sc_offered-- and it becomes U32_MAX-1. Consequent rndis_filter_device_remove() will hang while waiting for all U32_MAX-1 subchannels to appear and this is not going to happen. The immediate issue could be solved by adding num_sc_offered > 0 check to netvsc_sc_open() but we're getting out of sync with the host and it's not easy to adjust things later, e.g. in this particular case we'll be creating queues without a user request for it and races are expected. Same applies to other parts of the driver which have the same completion timeout. Following the trend in drivers/hv/* code I suggest we remove all these timeouts completely. As a guest we can always trust the host we're running on and if the host screws things up there is no easy way to recover anyway. Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Simon Horman authored
ipip6_tunnel_xmit() is called immediately after checking that skb->protocol is htons(ETH_P_IPV6) so there is no need to check it a second time. Found by inspection. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by:
-
David S. Miller authored
Florian Westphal says: ==================== sched, cbq: remove OVL_STRATEGY/POLICE support iproute2 does not implement any options that result in the TCA_CBQ_OVL_STRATEGY/TCA_CBQ_POLICE attributes being set/used. This series removes these two attributes from cbq and makes kernel reject them via EOPNOTSUPP in case they are present. The two followup changes then remove several features from qdisc infrastructure that are then no longer used/needed. These are: - The 'drop' method provided by most qdiscs - the 'reshape_fail' function used by some qdiscs - the __parent member in struct Qdisc I tested this with allmod and allyesconfig builds and also with a brief cbq script: tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class add dev eth0 parent 1:0 classid 1:1 est 1sec 8sec cbq bandwidth 10Mbit rate 5Mbit prio 1 allot 1514 maxburst 20 cell 8 avpkt 1000 bounded split 1:0 defmap 3f tc class add dev eth0 parent 1:0 classid 1:2 est 1sec 8sec cbq bandwidth 10Mbit rate 5Mbit prio 1 allot 1514 maxburst 20 cell 8 avpkt 1000 bounded split 1:0 defmap 3f tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip tos 0x10 0xff classid 1:1 police rate 2Mbit burst 10K reclassify tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip tos 0x0c 0xff classid 1:2 tc filter add dev eth0 parent 1:0 protocol ip prio 2 u32 match ip tos 0x10 0xff classid 1:2 tc filter add dev eth0 parent 1:0 protocol ip prio 3 u32 match ip tos 0x0 0x0 classid 1:2 No changes since v1 except patch #5 to fix up struct Qdisc layout. ==================== Signed-off-by: -
Florian Westphal authored
Earlier commits removed two members from struct Qdisc which places next_sched/gso_skb into a different cacheline than ->state. This restores the struct layout to what it was before the removal. Move the two members, then add an annotation so they all reside in the same cacheline. This adds a 16 byte hole after cpu_qstats. The hole could be closed but as it doesn't decrease total struct size just do it this way. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
after removal of TCA_CBQ_OVL_STRATEGY from cbq scheduler, there are no more callers of ->drop() outside of other ->drop functions, i.e. nothing calls them. Signed-off-by:
-
Florian Westphal authored
After the removal of TCA_CBQ_POLICE in cbq scheduler qdisc->reshape_fail is always NULL, i.e. qdisc_rehape_fail is now the same as qdisc_drop. Signed-off-by:
-
Florian Westphal authored
iproute2 doesn't implement any cbq option that results in this attribute being sent to kernel. To make use of it, user would have to - patch iproute2 - add a class - attach a qdisc to the class (default pfifo doesn't work as q->handle is 0 and cbq_set_police() is a no-op in this case) - re-'add' the same class (tc class change ...) again - user must also specifiy a defmap (e.g. 'split 1:0 defmap 3f'), since this 'police' feature relies on its presence - the added qdisc must be one of bfifo, pfifo or netem If all of these conditions are met and _some_ leaf qdiscs, namely p/bfifo, netem, plug or tbf would drop a packet, kernel calls back into cbq, which will attempt to re-queue the skb into a different class as indicated by the parents' defmap entry for TC_PRIO_BESTEFFORT. [ i.e. we behave as if tc_classify returned TC_ACT_RECLASSIFY ]. This feature, which isn't documented or implemented in iproute2, and isn't implemented consistently (most qdiscs like sfq, codel, etc drop right away instead of attempting this reclassification) is the sole reason for the reshape_fail and __parent member in Qdisc struct. So remove TCA_CBQ_POLICE support from the kernel, reject it via EOPNOTSUPP so userspace knows we don't support it, and then remove no-longer needed infrastructure in followup commit. Signed-off-by:
-
Florian Westphal authored
since initial revision of cbq in 2004 iproute 2 has never implemented support for TCA_CBQ_OVL_STRATEGY, which is what needs to be set to activate the class->drop() call (TC_CBQ_OVL_DROP strategy must be set by userspace value must be set by userspace). David Miller says: It seems really safe to kill this thing off, flag an error if someone tries to set the attribute, and therefore kill off all of the non-default cbq_ovl_*() functions. A followup commit can then remove all .drop qdisc methods since this removed the only caller. Signed-off-by:
-
Shweta Choudaha authored
The ip6 GRE tap device should not be forced to down state to change the mac address and should allow live address change for tap device similar to ipv4 gre. Signed-off-by:
Shweta Choudaha <schoudah@brocade.com> Signed-off-by:
-
- 08 Jun, 2016 5 commits
-
-
David S. Miller authored
David Ahern says: ==================== net: vrf: Improve use of FIB rules Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This solution still allows a user to insert their own rules for VRFs, including rules with additional attributes. Accordingly, it is backwards compatible with existing setups and allows other policy routing as desired. Hopefully v5 is the charm; my e-waste can is getting full. ==================== Signed-off-by: -
David Ahern authored
Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by:
-
David Ahern authored
Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: -
David S. Miller authored
Jon Maloy says: ==================== tipc: two small fixes We fix a couple of rarely seen anomalies discovered during testing. ==================== Signed-off-by: -
Jon Paul Maloy authored
The node keepalive interval is recalculated at each timer expiration to catch any changes in the link tolerance, and stored in a field in struct tipc_node. We use jiffies as unit for the stored value. This is suboptimal, because it makes the calculation unnecessary complex, including two unit conversions. The conversions also lead to a rounding error that causes the link "abort limit" to be 3 in the normal case, instead of 4, as intended. This again leads to unnecessary link resets when the network is pushed close to its limit, e.g., in an environment with hundreds of nodes or namesapces. In this commit, we do instead let the keepalive value be calculated and stored in milliseconds, so that there is only one conversion and the rounding error is eliminated. We also remove a redundant "keepalive" field in struct tipc_link. This is remnant from the previous implementation. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
