- 14 Jul, 2015 25 commits
-
-
Peter Ujfalusi authored
The board uses McASP1 <-> tlv320aic3106 for analog audio and has Headphone out and Line in connectors. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Add node for McASP1 along with the needed pinctrl entries. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Analog audio is using this codec on the board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
The same regulator is used by other chips on the board. The power path is: VBAT -> TPS63031 - Enable signal is V1_8D regulator -> V3_3D. V3_3D is used by SD slot and tlv320aic3106 codec as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
GPIO5_8 is used as a mux switch between LCD and HDMI displays. This mux affects audio routing as well since in LCD mode HDMI audio is not possible and when HDMI is selected analog audio is not working. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Use simple card for audio support on ePOS-EVM. The audio on the board is: McASP1 <-> tlv320aic3111 codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Analog audio is using this codec on the board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Add node for McASP1 along with the needed pinctrl entries. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
The VBAT and DCDC4 regulator is needed for audio support (tlv320aic3111) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
GPIO2_1 is used as a mux switch between LCD and HDMI displays. This mux affects audio routing as well since in LCD mode HDMI audio is not possible and when HDMI is selected analog audio is not working. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
The sound support consist only Headset output on the board and can be handled by "simple-audio-card". Also enable the Line-In route as the board has support for it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
When McASP is not in use the pins can be put to sleep mode to conserve power. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
More and more boards are moving to have audio support via simple-card. At the same time enable options needed for most am335x and am43xx board for audio support: McASP and TLV320AIC3X codecs. The later two has been selected by the CONFIG_SND_AM33XX_SOC_EVM option, but the aim is to convert all boards to use simple card. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
In addition to the regular mux configuration such as mux mode 1, 2 etc, certain pins of DRA7 require to have "virtual mode" also programmed. This allows for predefined delay characteristics to be used by the SoC to meet timing characterstics needed for the interface. Provide easy to use macro to do the same. It is important to note that the official TI guidelines recommend to do as minimal pin reconfiguration beyond the bootloader given the design of the hardware involved which can result in substantial glitches which may impair functionality of certain peripherals. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Vignesh R authored
On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to select cpsw slave0. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
The interconnects on dm816x are like on omap4, so we should use l3-noc instead of l3-smx. But as the related SoC specific l3_target_data is still missing from omap_l3_noc let's just remove the entry for now. Cc: Brian Hutchinson <b.hutchman@gmail.com> Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam YH Lee authored
Also, reduce the maximum SPI device speed to the max. supported by the LCD controller used on the LGPhilips LB035Q02 panel for this board. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Ash Charles authored
Some Overo COM models include NAND flash in the on-board package-on-package (PoP) chip. Add this to the base Overo devicetree. Most commonly, this is 512MB NAND from the Micron MT29C4G96MAZ family but, as discussed [1], several different sized are possible. To support different sizes, the last partition should fill to the end of the chip (i.e. MTDPART_SIZ_FULL). With thanks to Florian Vaussard for the original patch [2] and Adam Lee for updating it here. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-June/175760.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-June/175449.htmlSigned-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Adam YH Lee authored
Both Gumstix Overo and Overo Storm COMs use TWL4030 audio module connected to the McBSP2. As such, enable the McBSP2 module in the common device tree file, omap3-overo-base.dtsi, rather than in the processor-specific device tree files, omap3-overo.dtsi and omap3-overo-storm.dtsi. This corrects audio on the Storm COMs where the setting was accidentally missing from the device tree. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Ash Charles authored
The Gumstix "Tobi-Duo" expansion board [1] can be used with either OMAP3 Overo or Overo Storm COMs. It provides two NICs using LAN9221 chips. It is necessary to duplicate the interface information for the second SMSC9221 chip as discussed [2]. [1] https://store.gumstix.com/index.php/products/241/ [2] http://www.spinics.net/lists/linux-omap/msg115282.htmlSigned-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jyri Sarha authored
Use new binding for the external tda19988 HDMI encoder. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
The sDMA requests are routed through the DMA crossbar and without the crossbar only peripherals using DMA request 0-127 can be used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Suman Anna authored
Add the Wakeup M3 remote processor device node for the AM4372 SoC. The WkupM3 remote processor is used to implement and achieve low-power functionality on the AM33xx & AM43xx SoCs. This node is added as a child of the recently added l4_wkup node to reflect its presence within the SoC. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Suman Anna authored
The WakeupM3 remote processor device node has been moved to be a child node of the newly created l4_wkup node, to reflect its presence properly within the SoC. The node was added previously before any driver support, it is now updated as per the wkup_m3_rproc bindings added alongside the driver support. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dave Gerlach authored
Use pdata-quirks to provide platform data required for reset management during boot and shutdown of the wkup_m3 processor on both the AM33xx and AM43xx SoCs. The WkupM3 remote processor is used to implement and achieve low-power functionality on the AM33xx & AM43xx SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 12 Jul, 2015 11 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
Al Viro authored
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
-
- 11 Jul, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ...
-