- 23 Dec, 2013 40 commits
-
-
Chao Yu authored
As we know, some of our branch condition will rarely be true. So we could add 'unlikely' to let compiler optimize these code, by this way we could drop unneeded 'jump' assemble code to improve performance. change log: o add *unlikely* as many as possible across the whole source files at once suggested by Jaegeuk Kim. Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
In find_fsync_dnodes() and recover_data(), our flow is like this: ->f2fs_submit_page_bio() -> f2fs_put_page() -> page_cache_release() ---- page->_count declined to zero. ->__free_pages() -> put_page_testzero() ---- page->_count will be declined again. We will get a segment fault in put_page_testzero when CONFIG_DEBUG_VM is on, or return MM with a bad page with wrong _count num. So let's just release this page. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for simplification of code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Younger Liu authored
This minor change for the naming conventions of debugfs_root to avoid any possible conflicts to the other filesystem. Signed-off-by: Younger Liu <younger.liucn@gmail.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> [Jaegeuk Kim: change the patch name] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Younger Liu authored
When debugfs_create_file() failed in f2fs_create_root_stats(), debugfs_root should be remove. Signed-off-by: Younger Liu <liuyiyang@hisense.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment one by one, it makes low performance. So let's merge contiguous pages and readahead for better performance. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: adjust the new bio operations] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch integrates redundant bio operations on read and write IOs. 1. Move bio-related codes to the top of data.c. 2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read bios additionally. 3. Introduce __submit_merged_bio to submit the merged bio. 4. Change f2fs_readpage to f2fs_submit_page_bio. 5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and submit_write_page. Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com > Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Previously f2fs allocates its own bi_private data structure all the time even though we don't use it. But, can we remove this bi_private allocation? This patch removes such the additional bi_private allocation. 1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb. - This removes the usecases of bi_private in end_io. 2. Use bi_private only when we really need it. - The bi_private is used only when the checkpoint procedure is conducted. - When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio completion. - Since we have no dependancies to remove bi_private now, let's just use bi_private pointer as the completion pointer. Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
The recover_orphan_inodes() returns no error all the time, so we don't need to check its errors. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: add description] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
We should return error if we do not get an updated page in find_date_page when f2fs_readpage failed. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
The inode_page_locked should be a boolean variable. struct dnode_of_data { struct inode *inode; /* vfs inode pointer */ struct page *inode_page; /* its inode page, NULL is possible */ struct page *node_page; /* cached direct node page */ nid_t nid; /* node id of the direct node block */ unsigned int ofs_in_node; /* data offset in the node page */ ==> bool inode_page_locked; /* inode page is locked or not */ block_t data_blkaddr; /* block address of the node block */ }; Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: add description] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
The void *wait in bio_private is used for waiting completion of checkpoint bio. So we don't need to use its type as void, but declare it as completion type. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: add description] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
Because we will write node summaries when do_checkpoint with umount flag, our number of max orphan blocks should minus NR_CURSEG_NODE_TYPE additional. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Shu Tan <shu.tan@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
Because FALLOC_FL_PUNCH_HOLE flag must be ORed with FALLOC_FL_KEEP_SIZE in fallocate, so we could remove the useless 'keep size' branch code which will never be excuted in punch_hole. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Fan Li <fanofcode.li@samsung.com> [Jaegeuk Kim: remove an unnecessary parameter togather] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch removes the unnecessary condition checks on: fs/f2fs/gc.c:667 do_garbage_collect() warn: 'sum_page' isn't an ERR_PTR fs/f2fs/f2fs.h:795 f2fs_put_page() warn: 'page' isn't an ERR_PTR Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch fixes some bit overflows by the shift operations. Dan Carpenter reported potential bugs on bit overflows as follows. fs/f2fs/segment.c:910 submit_write_page() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/checkpoint.c:429 get_valid_checkpoint() warn: should '1 << ()' be a 64 bit type? fs/f2fs/data.c:408 f2fs_readpage() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/data.c:457 submit_read_page() warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type? fs/f2fs/data.c:525 get_data_block_ro() warn: should 'i << blkbits' be a 64 bit type? Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Gu Zheng authored
Fix a potential out of range issue introduced by commit: 22fb72225a f2fs: simplify write_orphan_inodes for better readable Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Let's remove the unnecessary return value. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Huajun Li authored
Add a mount option: inline_data. If the mount option is set, data of New created small files can be stored in their inode. Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Huajun Li authored
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate whether the inode has inline data. Inline data makes use of inode block's data indices region to save small file. Currently there are 923 data indices in an inode block. Since inline xattr has made use of the last 50 indices to save its data, there are 873 indices left which can be used for inline data. When FI_INLINE_DATA is set, the layout of inode block's indices region is like below: +-----------------+ | | Reserved. reserve_new_block() will make use of | i_addr[0] | i_addr[0] when we need to reserve a new data block | | to convert inline data into regular one's. |-----------------| | | Used by inline data. A file whose size is less than | i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra | | blocks by fallocate() can be saved here. |-----------------| | | | i_addr[873~922] | Reserved for inline xattr | | +-----------------+ Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Changman Lee authored
Let's send REQ_META or REQ_PRIO when reading meta area such as NAT/SIT etc. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch inserts information of bio types in more detail. So, we can now see REQ_META and REQ_PRIO too. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Huajun Li authored
Add the function f2fs_reserve_block() to easily reserve new blocks, and use it to clean up more codes. Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
If CONFIG_F2FS_CHECK_FS is unset, we don't need to add any debugging overhead. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
Previously we read sit entries page one by one, this method lost the chance of reading contiguous page together. So we read pages as contiguous as possible for better mount performance. change log: o merge judgements/use 'Continue' or 'Break' instead of 'Goto' as Gu Zheng suggested. o add mark_page_accessed() before release page to delay VM reclaiming. o remove '*order' for simplification of function as Jaegeuk Kim suggested. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: fix a bug on the block address calculation] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
This patch adds a tracepoint for f2fs_submit_read_bio. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_bio] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
This patch adds a tracepoint for submit_read_page. Signed-off-by: Chao Yu <chao2.yu@samsung.com> [Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_page] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Changman Lee authored
It is not efficient comparing each segment type to find node or data. Signed-off-by: Changman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: remove unnecessary white spaces] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
Change log from v1: o add mark_page_accessed() not to reclaim the nat pages. This patch changes the policy of submitting read bios at ra_nat_pages. Previously, f2fs submits small read bios with block plugging. But, with this patch, f2fs itself merges read bios first and then submits a large bio, which can reduce the bio handling overheads. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
For better read performance, we add a new function to support for merging contiguous read as the one for write. v1-->v2: o add declarations here as Gu Zheng suggested. o use new structure f2fs_bio_info introduced by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Acked-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
-
Gu Zheng authored
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Gu Zheng authored
Simplify write_orphan_inodes for better readable. Because we hold the orphan_inode_mutex, so it's safe to use list_for_each_entry instead of list_for_each_safe. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Gu Zheng authored
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Gu Zheng authored
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Gu Zheng authored
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The f2fs has three bio types, NODE, DATA, and META, and manages some data structures per each bio types. The codes are a little bit messy, thus, this patch introduces a bio array which groups individual data structures as follows. struct f2fs_bio_info { struct bio *bio; /* bios to merge */ sector_t last_block_in_bio; /* last block number */ struct mutex io_mutex; /* mutex for bio */ }; struct f2fs_sb_info { ... struct f2fs_bio_info write_io[NR_PAGE_TYPE]; /* for write bios */ ... }; The code changes from this new data structure are trivial. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
The f2fs manages an extent cache to search a number of consecutive data blocks very quickly. However it conducts unnecessary cache operations if the file is highly fragmented with no valid extent cache. In such the case, we don't need to handle the extent cache, but just can disable the cache facility. Nevertheless, this patch gives one more chance to enable the extent cache. For example, 1. create a file 2. write data sequentially which produces a large valid extent cache 3. update some data, resulting in a fragmented extent 4. if the fragmented extent is too small, then drop extent cache 5. close the file 6. open the file again 7. give another chance to make a new extent cache 8. write data sequentially again which creates another big extent cache. ... Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch removes an unnecessary semaphore (i.e., sbi->bio_sem). There is no reason to use the semaphore when f2fs submits read and write IOs. Instead, let's use a write mutex and cover the sbi->bio[] by the lock. Change log from v1: o split write_mutex suggested by Chao Yu Chao described, "All DATA/NODE/META bio buffers in superblock is protected by 'sbi->write_mutex', but each bio buffer area is independent, So we should split write_mutex to three for DATA/NODE/META." Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Jaegeuk Kim authored
This patch introduces PAGE_TYPE_OF_BIO() and cleans up do_submit_bio() with it. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Chao Yu authored
We should use f2fs_put_page to release page for uniform style of f2fs code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
-