- 27 Jul, 2016 40 commits
-
-
Mark Rutland authored
commit dbd4d7ca upstream. We validate pstate using PSR_MODE32_BIT, which is part of the user-provided pstate (and cannot be trusted). Also, we conflate validation of AArch32 and AArch64 pstate values, making the code difficult to reason about. Instead, validate the pstate value based on the associated task. The task may or may not be current (e.g. when using ptrace), so this must be passed explicitly by callers. To avoid circular header dependencies via sched.h, is_compat_task is pulled out of asm/ptrace.h. To make the code possible to reason about, the AArch64 and AArch32 validation is split into separate functions. Software must respect the RES0 policy for SPSR bits, and thus the kernel mirrors the hardware policy (RAZ/WI) for bits as-yet unallocated. When these acquire an architected meaning writes may be permitted (potentially with additional validation). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ rebased for v4.1+ This avoids a user-triggerable Oops() if a task is switched to a mode not supported by the kernel (e.g. switching a 64-bit task to AArch32). ] Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> [backport] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Junichi Nomura authored
commit ae4ea9a2 upstream. Commit 7ea0ed2b ("ipmi: Make the message handler easier to use for SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg() for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list. That could lead to following list corruption problems: 1) low-level function treats smi_msg as not connected to list handle_one_recv_msg() could end up calling smi_send(), which assumes the msg is not connected to list. For example, the following sequence could corrupt list by doing list_add_tail() for the entry still connected to other list. handle_new_recv_msgs() msg = list_entry(waiting_rcv_msgs) handle_one_recv_msg(msg) handle_ipmb_get_msg_cmd(msg) smi_send(msg) spin_lock(xmit_msgs_lock) list_add_tail(msg) spin_unlock(xmit_msgs_lock) 2) race between multiple handle_new_recv_msgs() instances handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling handle_one_recv_msg() then retakes the lock and list_del() it. If others call handle_new_recv_msgs() during the window shown below list_del() will be done twice for the same smi_msg. handle_new_recv_msgs() spin_lock(waiting_rcv_msgs_lock) msg = list_entry(waiting_rcv_msgs) spin_unlock(waiting_rcv_msgs_lock) | | handle_one_recv_msg(msg) | spin_lock(waiting_rcv_msgs_lock) list_del(msg) spin_unlock(waiting_rcv_msgs_lock) Fixes: 7ea0ed2b ("ipmi: Make the message handler easier to use for SMI interfaces") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> [Added a comment to describe why this works.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathieu Larouche authored
commit d3922b69 upstream. - Fixed black screen for some resolutions of G200e rev4 - Fixed testm & testn which had predetermined value. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit 522e5cb7 upstream. There is a race condition in the AMD IOMMU init code that causes requested unity mappings to be blocked by the IOMMU for a short period of time. This results on boot failures and IO_PAGE_FAULTs on some machines. Fix this by making sure the unity mappings are installed before all other DMA is blocked. Fixes: aafd8ba0 ('iommu/amd: Implement add_device and remove_device') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit a4c34ff1 upstream. This seems to be required on some X58 chipsets on systems with more than one IOMMU. QI does not work until it is enabled on all IOMMUs in the system. Reported-by: Dheeraj CVR <cvr.dheeraj@gmail.com> Tested-by: Dheeraj CVR <cvr.dheeraj@gmail.com> Fixes: 5f0a7f76 ('iommu/vt-d: Make root entry visible for hardware right after allocation') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jean-Philippe Brucker authored
commit 9aeb26cf upstream. The map_sg callback is missing from arm_smmu_ops, but is required by iommu.h. Similarly to most other IOMMU drivers, connect it to default_iommu_map_sg. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit 7e1b1fc4 upstream. Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280 [<ffffffff815604c0>] driver_register+0x60/0xe0 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146] [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: fe480a26 (Modules: only add drivers/ direcory if needed) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Red Hat) authored
commit 70c8217a upstream. If a task uses a non constant string for the format parameter in trace_printk(), then the trace_printk_fmt variable is set to NULL. This variable is then saved in the __trace_printk_fmt section. The function hold_module_trace_bprintk_format() checks to see if duplicate formats are used by modules, and reuses them if so (saves them to the list if it is new). But this function calls lookup_format() that does a strcmp() to the value (which is now NULL) and can cause a kernel oops. This wasn't an issue till 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") which added "__used" to the trace_printk_fmt variable, and before that, the kernel simply optimized it out (no NULL value was saved). The fix is simply to handle the NULL pointer in lookup_format() and have the caller ignore the value if it was NULL. Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.comReported-by: xingzhen <zhengjun.xing@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Fixes: 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Allen Hung authored
commit 6dd2e27a upstream. The usage Confidence is mandary to Windows Precision Touchpad devices. If it is examined in input_mapping on a WIndows Precision Touchpad, a new add quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the device. A touch with the confidence bit is not set is determined as invalid. Tested on Dell XPS13 9343 Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # XPS 13 9350, BIOS 1.4.3 Signed-off-by: Allen Hung <allen_hung@dell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Scott Bauer authored
commit 93a2001b upstream. This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Signed-off-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit ed596a4a upstream. Flushing a work that reschedules itself is not a sensible operation. It needs to be killed. Failure to do so leads to a kernel panic in the timer code. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quentin Casasnovas authored
commit ff30ef40 upstream. I couldn't get Xen to boot a L2 HVM when it was nested under KVM - it was getting a GP(0) on a rather unspecial vmread from Xen: (XEN) ----[ Xen-4.7.0-rc x86_64 debug=n Not tainted ]---- (XEN) CPU: 1 (XEN) RIP: e008:[<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) RFLAGS: 0000000000010202 CONTEXT: hypervisor (d1v0) (XEN) rax: ffff82d0801e6288 rbx: ffff83003ffbfb7c rcx: fffffffffffab928 (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: ffff83000bdd0000 (XEN) rbp: ffff83000bdd0000 rsp: ffff83003ffbfab0 r8: ffff830038813910 (XEN) r9: ffff83003faf3958 r10: 0000000a3b9f7640 r11: ffff83003f82d418 (XEN) r12: 0000000000000000 r13: ffff83003ffbffff r14: 0000000000004802 (XEN) r15: 0000000000000008 cr0: 0000000080050033 cr4: 00000000001526e0 (XEN) cr3: 000000003fc79000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen code around <ffff82d0801e629e> (vmx_get_segment_register+0x14e/0x450): (XEN) 00 00 41 be 02 48 00 00 <44> 0f 78 74 24 08 0f 86 38 56 00 00 b8 08 68 00 (XEN) Xen stack trace from rsp=ffff83003ffbfab0: ... (XEN) Xen call trace: (XEN) [<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) [<ffff82d0801f3695>] get_page_from_gfn_p2m+0x165/0x300 (XEN) [<ffff82d0801bfe32>] hvmemul_get_seg_reg+0x52/0x60 (XEN) [<ffff82d0801bfe93>] hvm_emulate_prepare+0x53/0x70 (XEN) [<ffff82d0801ccacb>] handle_mmio+0x2b/0xd0 (XEN) [<ffff82d0801be591>] emulate.c#_hvm_emulate_one+0x111/0x2c0 (XEN) [<ffff82d0801cd6a4>] handle_hvm_io_completion+0x274/0x2a0 (XEN) [<ffff82d0801f334a>] __get_gfn_type_access+0xfa/0x270 (XEN) [<ffff82d08012f3bb>] timer.c#add_entry+0x4b/0xb0 (XEN) [<ffff82d08012f80c>] timer.c#remove_entry+0x7c/0x90 (XEN) [<ffff82d0801c8433>] hvm_do_resume+0x23/0x140 (XEN) [<ffff82d0801e4fe7>] vmx_do_resume+0xa7/0x140 (XEN) [<ffff82d080164aeb>] context_switch+0x13b/0xe40 (XEN) [<ffff82d080128e6e>] schedule.c#schedule+0x22e/0x570 (XEN) [<ffff82d08012c0cc>] softirq.c#__do_softirq+0x5c/0x90 (XEN) [<ffff82d0801602c5>] domain.c#idle_loop+0x25/0x50 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 1: (XEN) GENERAL PROTECTION FAULT (XEN) [error_code=0000] (XEN) **************************************** Tracing my host KVM showed it was the one injecting the GP(0) when emulating the VMREAD and checking the destination segment permissions in get_vmx_mem_address(): 3) | vmx_handle_exit() { 3) | handle_vmread() { 3) | nested_vmx_check_permission() { 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.065 us | vmx_read_guest_seg_selector(); 3) 0.066 us | vmx_read_guest_seg_ar(); 3) 1.636 us | } 3) 0.058 us | vmx_get_rflags(); 3) 0.062 us | vmx_read_guest_seg_ar(); 3) 3.469 us | } 3) | vmx_get_cs_db_l_bits() { 3) 0.058 us | vmx_read_guest_seg_ar(); 3) 0.662 us | } 3) | get_vmx_mem_address() { 3) 0.068 us | vmx_cache_reg(); 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.068 us | vmx_read_guest_seg_selector(); 3) 0.071 us | vmx_read_guest_seg_ar(); 3) 1.756 us | } 3) | kvm_queue_exception_e() { 3) 0.066 us | kvm_multiple_exception(); 3) 0.684 us | } 3) 4.085 us | } 3) 9.833 us | } 3) + 10.366 us | } Cross-checking the KVM/VMX VMREAD emulation code with the Intel Software Developper Manual Volume 3C - "VMREAD - Read Field from Virtual-Machine Control Structure", I found that we're enforcing that the destination operand is NOT located in a read-only data segment or any code segment when the L1 is in long mode - BUT that check should only happen when it is in protected mode. Shuffling the code a bit to make our emulation follow the specification allows me to boot a Xen dom0 in a nested KVM and start HVM L2 guests without problems. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Eugene Korenevsky <ekorenevsky@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiubo Li authored
commit caf1ff26 upstream. These days, we experienced one guest crash with 8 cores and 3 disks, with qemu error logs as bellow: qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984: kvm_irqchip_commit_routes: Assertion `ret == 0' failed. And then we found one patch(bdf026317d) in qemu tree, which said could fix this bug. Execute the following script will reproduce the BUG quickly: irq_affinity.sh ======================================================================== vda_irq_num=25 vdb_irq_num=27 while [ 1 ] do for irq in {1,2,4,8,10,20,40,80} do echo $irq > /proc/irq/$vda_irq_num/smp_affinity echo $irq > /proc/irq/$vdb_irq_num/smp_affinity dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct done done ======================================================================== The following qemu log is added in the qemu code and is displayed when this bug reproduced: kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024, irq_routes->nr: 1024, gsi_count: 1024. That's to say when irq_routes->nr == 1024, there are 1024 routing entries, but in the kernel code when routes->nr >= 1024, will just return -EINVAL; The nr is the number of the routing entries which is in of [1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1]. This patch fix the BUG above. Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit 38327424 upstream. If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
commit b31ac426 upstream. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
commit 4d0cb15f upstream. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin KaFai Lau authored
[ Upstream commit 903ce4ab ] It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a1 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a1 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Tested-by: Petr Novopashenniy <pety@rusnet.ru> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
[ Upstream commit c086e709 ] Several Lenovo users have reported problems with their Sierra Wireless EM7455 modem. The driver has loaded successfully and the MBIM management channel has appeared to work, including establishing a connection to the mobile network. But no frames have been received over the data interface. The problem affects all EM7455 and MC7455, and is assumed to affect other modems based on the same Qualcomm chipset and baseband firmware. Testing narrowed the problem down to what seems to be a firmware timing bug during initialization. Adding a short sleep while probing is sufficient to make the problem disappear. Experiments have shown that 1-2 ms is too little to have any effect, while 10-20 ms is enough to reliably succeed. Reported-by: Stefan Armbruster <ml001@armbruster-it.de> Reported-by: Ralph Plawetzki <ralph@purejava.org> Reported-by: Andreas Fett <andreas.fett@secunet.com> Reported-by: Rasmus Lerdorf <rasmus@lerdorf.com> Reported-by: Samo Ratnik <samo.ratnik@gmail.com> Reported-and-tested-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit 82a31b92 ] Similar to commit 9b368814 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit eb70db87 ] People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by: Eric Leblond <eric@regit.org> Tested-by: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit 89741892 upstream. As per commit: b7fa30c9 ("sched/fair: Fix post_init_entity_util_avg() serialization") > the code generated from update_cfs_rq_load_avg(): > > if (atomic_long_read(&cfs_rq->removed_load_avg)) { > s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0); > sa->load_avg = max_t(long, sa->load_avg - r, 0); > sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0); > removed_load = 1; > } > > turns into: > > ffffffff81087064: 49 8b 85 98 00 00 00 mov 0x98(%r13),%rax > ffffffff8108706b: 48 85 c0 test %rax,%rax > ffffffff8108706e: 74 40 je ffffffff810870b0 <update_blocked_averages+0xc0> > ffffffff81087070: 4c 89 f8 mov %r15,%rax > ffffffff81087073: 49 87 85 98 00 00 00 xchg %rax,0x98(%r13) > ffffffff8108707a: 49 29 45 70 sub %rax,0x70(%r13) > ffffffff8108707e: 4c 89 f9 mov %r15,%rcx > ffffffff81087081: bb 01 00 00 00 mov $0x1,%ebx > ffffffff81087086: 49 83 7d 70 00 cmpq $0x0,0x70(%r13) > ffffffff8108708b: 49 0f 49 4d 70 cmovns 0x70(%r13),%rcx > > Which you'll note ends up with sa->load_avg -= r in memory at > ffffffff8108707a. So I _should_ have looked at other unserialized users of ->load_avg, but alas. Luckily nikbor reported a similar /0 from task_h_load() which instantly triggered recollection of this here problem. Aside from the intermediate value hitting memory and causing problems, there's another problem: the underflow detection relies on the signed bit. This reduces the effective width of the variables, IOW its effectively the same as having these variables be of signed type. This patch changes to a different means of unsigned underflow detection to not rely on the signed bit. This allows the variables to use the 'full' unsigned range. And it does so with explicit LOAD - STORE to ensure any intermediate value will never be visible in memory, allowing these unserialized loads. Note: GCC generates crap code for this, might warrant a look later. Note2: I say 'full' above, if we end up at U*_MAX we'll still explode; maybe we should do clamping on add too. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yuyang Du <yuyang.du@intel.com> Cc: bsegall@google.com Cc: kernel@kyup.com Cc: morten.rasmussen@arm.com Cc: pjt@google.com Cc: steve.muckle@linaro.org Fixes: 9d89c257 ("sched/fair: Rewrite runnable load and utilization average tracking") Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kirill A. Shutemov authored
commit 4ac1c17b upstream. During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Weinberger authored
commit 1118dce7 upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Hogan authored
commit 797179bc upstream. Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never get a TLB refill exception in it when KVM is built as a module. This was observed to happen with the host MIPS kernel running under QEMU, due to a not entirely transparent optimisation in the QEMU TLB handling where TLB entries replaced with TLBWR are copied to a separate part of the TLB array. Code in those pages continue to be executable, but those mappings persist only until the next ASID switch, even if they are marked global. An ASID switch happens in __kvm_mips_vcpu_run() at exception level after switching to the guest exception base. Subsequent TLB mapped kernel instructions just prior to switching to the guest trigger a TLB refill exception, which enters the guest exception handlers without updating EPC. This appears as a guest triggered TLB refill on a host kernel mapped (host KSeg2) address, which is not handled correctly as user (guest) mode accesses to kernel (host) segments always generate address error exceptions. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve Capper authored
commit 56530f5d upstream. Currently pmd_mknotpresent will use a zero entry to respresent an invalidated pmd. Unfortunately this definition clashes with pmd_none, thus it is possible for a race condition to occur if zap_pmd_range sees pmd_none whilst __split_huge_pmd_locked is running too with pmdp_invalidate just called. This patch fixes the race condition by modifying pmd_mknotpresent to create non-zero faulting entries (as is done in other architectures), removing the ambiguity with pmd_none. [catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit 62453188 upstream. In a subsequent patch, pmd_mknotpresent will clear the valid bit of the pmd entry, resulting in a not-present entry from the hardware's perspective. Unfortunately, pmd_present simply checks for a non-zero pmd value and will therefore continue to return true even after a pmd_mknotpresent operation. Since pmd_mknotpresent is only used for managing huge entries, this is only an issue for the 3-level case. This patch fixes the 3-level pmd_present implementation to take into account the valid bit. For bisectability, the change is made before the fix to pmd_mknotpresent. [catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <Steve.Capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
commit 20c15226 upstream. The value used for Micrel PHY mask is not correct. Use the MICREL_PHY_ID_MASK definition instead. Thanks to Jiri Luznicky for proposing the fix at https://community.freescale.com/thread/387739 Fixes: 709bc065 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit e547f262 upstream. Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit d20cb71d upstream. In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Tested-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
commit 99965378 upstream. Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by: David Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Gruenbacher authored
commit 485e71e8 upstream. Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Drokin authored
commit 5cc1fb2a upstream. To avoid racing entry into nfs4_get_vfs_file(). Make init_open_stateid() return with locked stateid to be unlocked by the caller. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Drokin authored
commit feb9dad5 upstream. It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit d50039ea upstream. Also simplify the logic a bit. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Trond Myklebust <trondmy@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit 62a584fe upstream. As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Fixes: 9fc3a43e ("writeback: separate out domain_dirty_limits()") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Adjusted comment based on Jan's suggestion. Signed-off-by: Jens Axboe <axboe@fb.com>
-
Lukasz Luba authored
commit f840ab18 upstream. The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Javi Merino <javi.merino@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Lutomirski authored
commit a44323e2 upstream. The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 85b03b30 upstream. This reverts commit 923b93e4. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit 1ead852d upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
commit dcfc4724 upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-