- 09 Feb, 2014 2 commits
-
-
Jeff Mahoney authored
The set_fslabel ioctl uses btrfs_end_transaction, which means it's possible that the change will be lost if the system crashes, same for the newly set features. Let's use btrfs_commit_transaction instead. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
Josef Bacik authored
Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't reproduce. Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set, which meant that a key part of Filipe's original patch was not being built in. This appears to be a mess up with merging Filipe's patch as it does not exist in his original patch. Fix this by changing how we make sure del_waiting_dir_move asserts that it did not error and take the function out of the ifdef check. This makes btrfs/030 pass with the assert on or off. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Filipe Manana <fdmanana@gmail.com> Signed-off-by:
-
- 03 Feb, 2014 3 commits
-
-
Filipe David Borba Manana authored
It seems that when init_btrfs_fs() is called, crc32c/crc32c-intel might not always be already initialized, which results in the call to crypto_alloc_shash() returning -ENOENT, as experienced by Ahmet who reported this. Therefore make sure init_btrfs_fs() is called after crc32c is initialized (which is at initialization level 6, module_init), by using late_initcall (which is at initialization level 7) instead of module_init for btrfs. Reported-and-Tested-by:
Ahmet Inan <ainan@mathematik.uni-freiburg.de> Signed-off-by:
-
Filipe David Borba Manana authored
After the commit titled "Btrfs: fix btrfs boot when compiled as built-in", LIBCRC32C requirement was removed from btrfs' Kconfig. This made it not possible to build a kernel with btrfs enabled (either as module or built-in) if libcrc32c is not enabled as well. So just replace all uses of libcrc32c with the equivalent function in btrfs hash.h - btrfs_crc32c. Signed-off-by:
-
Josef Bacik authored
It's just broken and it's taking a lot of effort to fix it, so for now just disable it so people can defrag in peace. Thanks, Cc: stable@vger.kernel.org Signed-off-by:
-
- 29 Jan, 2014 14 commits
-
-
Chris Mason authored
Our goto out should have gone a little farther. Signed-off-by: -
Chris Mason authored
We have a race during inode init because the BTRFS_I(inode)->location is setup after the inode hash table lock is dropped. btrfs_find_actor uses the location field, so our search might not find an existing inode in the hash table if we race with the inode init code. This commit changes things to setup the location field sooner. Also the find actor now uses only the location objectid to match inodes. For inode hashing, we just need a unique and stable test, it doesn't have to reflect the inode numbers we show to userland. Signed-off-by: -
Chris Mason authored
If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect the new size. The fixe uses the size directly from the item header when reading uncompressed inlines, and also fixes truncate to update the size as it goes. Reported-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Filipe David Borba Manana authored
If the current path's leaf slot is 0, we do search for the previous leaf (via btrfs_prev_leaf) and set the new path's leaf slot to a value corresponding to the number of items - 1 of the former leaf. Fix this by using the slot set by btrfs_prev_leaf, decrementing it by 1 if it's equal to the leaf's number of items. Use of btrfs_search_slot_for_read() for backward iteration is used in particular by the send feature, which could miss items when the input leaf has less items than its previous leaf. This could be reproduced by running btrfs/007 from xfstests in a loop. Signed-off-by:
-
Wang Shilong authored
There are not any users that use ulist except Btrfs,don't export them. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Reviewed-by:
-
Wang Shilong authored
We are really suffering from now ulist's implementation, some developers gave their try, and i just gave some of my ideas for things: 1. use list+rb_tree instead of arrary+rb_tree 2. add cur_list to iterator rather than ulist structure. 3. add seqnum into every node when they are added, this is used to do selfcheck when iterating node. I noticed Zach Brown's comments before, long term is to kick off ulist implementation, however, for now, we need at least avoid arrary from ulist. Cc: Liu Bo <bo.li.liu@oracle.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Zach Brown <zab@redhat.com> Signed-off-by:
-
Wang Shilong authored
When walking backrefs, we may iterate every inode's extent and add/merge them into ulist, and the caller will free memory from ulist. However, if we fail to allocate inode's extents element memory or ulist_add() fail to allocate memory, we won't add allocated memory into ulist, and the caller won't free some allocated memory thus memory leaks happen. Signed-off-by:
-
Filipe David Borba Manana authored
There was a case where file hole detection was incorrect and it would cause an incremental send to override a section of a file with zeroes. This happened in the case where between the last leaf we processed which contained a file extent item for our current inode and the leaf we're currently are at (and has a file extent item for our current inode) there are only leafs containing exclusively file extent items for our current inode, and none of them was updated since the previous send operation. The file hole detection code would incorrectly consider the file range covered by these leafs as a hole. A test case for xfstests follows soon. Signed-off-by:
-
Wang Shilong authored
I can easily trigger the following warnings when enabling quota in my virtual machine(running Opensuse), Steps are firstly creating a subvolume full of fragment extents, and then create many snapshots (500 in my test case). [ 2362.808459] BUG: soft lockup - CPU#0 stuck for 22s! [btrfs-qgroup-re:1970] [ 2362.809023] task: e4af8450 ti: e371c000 task.ti: e371c000 [ 2362.809026] EIP: 0060:[<fa38f4ae>] EFLAGS: 00000246 CPU: 0 [ 2362.809049] EIP is at __merge_refs+0x5e/0x100 [btrfs] [ 2362.809051] EAX: 00000000 EBX: cfadbcf0 ECX: 00000000 EDX: cfadbcb0 [ 2362.809052] ESI: dd8d3370 EDI: e371dde0 EBP: e371dd6c ESP: e371dd5c [ 2362.809054] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 2362.809055] CR0: 80050033 CR2: ac454d50 CR3: 009a9000 CR4: 001407d0 [ 2362.809099] Stack: [ 2362.809100] 00000001 e371dde0 dfcc6890 f29f8000 e371de28 fa39016d 00000011 00000001 [ 2362.809105] 99bfc000 00000000 93928000 00000000 00000001 00000050 e371dda8 00000001 [ 2362.809109] f3a31000 f3413000 00000001 e371ddb8 000040a8 00000202 00000000 00000023 [ 2362.809113] Call Trace: [ 2362.809136] [<fa39016d>] find_parent_nodes+0x34d/0x1280 [btrfs] [ 2362.809156] [<fa391172>] btrfs_find_all_roots+0xb2/0x110 [btrfs] [ 2362.809174] [<fa3934a8>] btrfs_qgroup_rescan_worker+0x358/0x7a0 [btrfs] [ 2362.809180] [<c024d0ce>] ? lock_timer_base.isra.39+0x1e/0x40 [ 2362.809199] [<fa3648df>] worker_loop+0xff/0x470 [btrfs] [ 2362.809204] [<c027a88a>] ? __wake_up_locked+0x1a/0x20 [ 2362.809221] [<fa3647e0>] ? btrfs_queue_worker+0x2b0/0x2b0 [btrfs] [ 2362.809225] [<c025ebbc>] kthread+0x9c/0xb0 [ 2362.809229] [<c06b487b>] ret_from_kernel_thread+0x1b/0x30 [ 2362.809233] [<c025eb20>] ? kthread_create_on_node+0x110/0x110 By adding a reschedule point at the end of btrfs_find_all_roots(), i no longer hit these warnings. Cc: Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Filipe David Borba Manana authored
Instead of looking for a file extent item, process it, release the path and do a btree search for the next file extent item, just process all file extent items in a leaf without intermediate btree searches. This way we save cpu and we're not blocking other tasks or affecting concurrency on the btree, because send's paths use the commit root and skip btree node/leaf locking. Signed-off-by:
-
Wang Shilong authored
We can only tolerate ENOENT here, for other errors, we should return directly. Signed-off-by:
-
Wang Shilong authored
There is a race condition between resolving indirect ref and root deletion, and we should gurantee that root can not be destroyed to avoid accessing broken tree here. Here we fix it by holding @subvol_srcu, and we will release it as soon as we have held root node lock. Signed-off-by:
-
Gui Hecheng authored
When we have two adjacent extents in relink_extent_backref, we try to merge them. When we use btrfs_search_slot to locate the slot for the current extent, we shouldn't set "ins_len = 1", because we will merge it into the previous extent rather than insert a new item. Otherwise, we may happen to create a new leaf in btrfs_search_slot and path->slot[0] will be 0. Then we try to fetch the previous item using "path->slots[0]--", and it will cause a warning as follows: [ 145.713385] WARNING: CPU: 3 PID: 1796 at fs/btrfs/extent_io.c:5043 map_private_extent_buffer+0xd4/0xe0 [ 145.713387] btrfs bad mapping eb start 53370886 len 4096, wanted 167772306 8 ... [ 145.713462] [<ffffffffa034b1f4>] map_private_extent_buffer+0xd4/0xe0 [ 145.713476] [<ffffffffa030097a>] ? btrfs_free_path+0x2a/0x40 [ 145.713485] [<ffffffffa0340864>] btrfs_get_token_64+0x64/0xf0 [ 145.713498] [<ffffffffa033472c>] relink_extent_backref+0x41c/0x820 [ 145.713508] [<ffffffffa0334d69>] btrfs_finish_ordered_io+0x239/0xa80 I encounter this warning when running defrag having mkfs.btrfs with option -M. At the same time there are read/writes & snapshots running at background. Signed-off-by:
Gui Hecheng <guihc.fnst@cn.fujitsu.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Filipe David Borba Manana authored
The send operation processes inodes by their ascending number, and assumes that any rename/move operation can be successfully performed (sent to the caller) once all previous inodes (those with a smaller inode number than the one we're currently processing) were processed. This is not true when an incremental send had to process an hierarchical change between 2 snapshots where the parent-children relationship between directory inodes was reversed - that is, parents became children and children became parents. This situation made the path building code go into an infinite loop, which kept allocating more and more memory that eventually lead to a krealloc warning being displayed in dmesg: WARNING: CPU: 1 PID: 5705 at mm/page_alloc.c:2477 __alloc_pages_nodemask+0x365/0xad0() Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) snd_hda_codec_hdmi snd_hda_codec_realtek joydev radeon snd_hda_intel snd_hda_codec snd_hwdep snd_seq_midi snd_pcm psmouse i915 snd_rawmidi serio_raw snd_seq_midi_event lpc_ich snd_seq snd_timer ttm snd_seq_device rfcomm drm_kms_helper parport_pc bnep bluetooth drm ppdev snd soundcore i2c_algo_bit snd_page_alloc binfmt_misc video lp parport r8169 mii hid_generic usbhid hid CPU: 1 PID: 5705 Comm: btrfs Tainted: G O 3.13.0-rc7-fdm-btrfs-next-18+ #3 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 5381.660441] 00000000000009ad ffff8806f6f2f4e8 ffffffff81777434 0000000000000007 [ 5381.660447] 0000000000000000 ffff8806f6f2f528 ffffffff8104a9ec ffff8807038f36f0 [ 5381.660452] 0000000000000000 0000000000000206 ffff8807038f2490 ffff8807038f36f0 [ 5381.660457] Call Trace: [ 5381.660464] [<ffffffff81777434>] dump_stack+0x4e/0x68 [ 5381.660471] [<ffffffff8104a9ec>] warn_slowpath_common+0x8c/0xc0 [ 5381.660476] [<ffffffff8104aa3a>] warn_slowpath_null+0x1a/0x20 [ 5381.660480] [<ffffffff81144995>] __alloc_pages_nodemask+0x365/0xad0 [ 5381.660487] [<ffffffff8108313f>] ? local_clock+0x4f/0x60 [ 5381.660491] [<ffffffff811430e8>] ? free_one_page+0x98/0x440 [ 5381.660495] [<ffffffff8108313f>] ? local_clock+0x4f/0x60 [ 5381.660502] [<ffffffff8113fae4>] ? __get_free_pages+0x14/0x50 [ 5381.660508] [<ffffffff81095fb8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 5381.660515] [<ffffffff81183caf>] alloc_pages_current+0x10f/0x1f0 [ 5381.660520] [<ffffffff8113fae4>] ? __get_free_pages+0x14/0x50 [ 5381.660524] [<ffffffff8113fae4>] __get_free_pages+0x14/0x50 [ 5381.660530] [<ffffffff8115dace>] kmalloc_order_trace+0x3e/0x100 [ 5381.660536] [<ffffffff81191ea0>] __kmalloc_track_caller+0x220/0x230 [ 5381.660560] [<ffffffffa0729fdb>] ? fs_path_ensure_buf.part.12+0x6b/0x200 [btrfs] [ 5381.660564] [<ffffffff8178085c>] ? retint_restore_args+0xe/0xe [ 5381.660569] [<ffffffff811580ef>] krealloc+0x6f/0xb0 [ 5381.660586] [<ffffffffa0729fdb>] fs_path_ensure_buf.part.12+0x6b/0x200 [btrfs] [ 5381.660601] [<ffffffffa072a208>] fs_path_prepare_for_add+0x98/0xb0 [btrfs] [ 5381.660615] [<ffffffffa072a2bc>] fs_path_add_path+0x2c/0x60 [btrfs] [ 5381.660628] [<ffffffffa072c55c>] get_cur_path+0x7c/0x1c0 [btrfs] Even without this loop, the incremental send couldn't succeed, because it would attempt to send a rename/move operation for the lower inode before the highest inode number was renamed/move. This issue is easy to trigger with the following steps: $ mkfs.btrfs -f /dev/sdb3 $ mount /dev/sdb3 /mnt/btrfs $ mkdir -p /mnt/btrfs/a/b/c/d $ mkdir /mnt/btrfs/a/b/c2 $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap1 $ mv /mnt/btrfs/a/b/c/d /mnt/btrfs/a/b/c2/d2 $ mv /mnt/btrfs/a/b/c /mnt/btrfs/a/b/c2/d2/cc $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap2 $ btrfs send -p /mnt/btrfs/snap1 /mnt/btrfs/snap2 > /tmp/incremental.send The structure of the filesystem when the first snapshot is taken is: . (ino 256) |-- a (ino 257) |-- b (ino 258) |-- c (ino 259) | |-- d (ino 260) | |-- c2 (ino 261) And its structure when the second snapshot is taken is: . (ino 256) |-- a (ino 257) |-- b (ino 258) |-- c2 (ino 261) |-- d2 (ino 260) |-- cc (ino 259) Before the move/rename operation is performed for the inode 259, the move/rename for inode 260 must be performed, since 259 is now a child of 260. A test case for xfstests, with a more complex scenario, will follow soon. Signed-off-by:
-
- 28 Jan, 2014 21 commits
-
-
Anand Jain authored
reproducer: mkfs.btrfs -f /dev/sdb &&\ mount /dev/sdb /btrfs &&\ btrfs dev add -f /dev/sdc /btrfs &&\ umount /btrfs &&\ wipefs -a /dev/sdc &&\ mount -o degraded /dev/sdb /btrfs //above mount fails so try with RO mount -o degraded,ro /dev/sdb /btrfs ------ sysfs: cannot create duplicate filename '/fs/btrfs/3f48c79e-5ed0-4e87-b189-86e749e503f4' :: dump_stack+0x49/0x5e warn_slowpath_common+0x87/0xb0 warn_slowpath_fmt+0x41/0x50 strlcat+0x69/0x80 sysfs_warn_dup+0x87/0xa0 sysfs_add_one+0x40/0x50 create_dir+0x76/0xc0 sysfs_create_dir_ns+0x7a/0xc0 kobject_add_internal+0xad/0x220 kobject_add_varg+0x38/0x60 kobject_init_and_add+0x53/0x70 mutex_lock+0x11/0x40 __free_pages+0x25/0x30 free_pages+0x41/0x50 selinux_sb_copy_data+0x14e/0x1e0 mount_fs+0x3e/0x1a0 vfs_kern_mount+0x71/0x120 do_mount+0x3f7/0x980 SyS_mount+0x8b/0xe0 system_call_fastpath+0x16/0x1b ------ further 'modprobe -r btrfs' fails as well Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Filipe David Borba Manana authored
The buffer size argument passed to snprintf must account for the trailing null byte added by snprintf, and it returns a value >= then sizeof(buffer) when the string can't fit in the buffer. Since our buffer has a size of 64 characters, and the maximum orphan name we can generate is 63 characters wide, we must pass 64 as the buffer size to snprintf, and not 63. Signed-off-by:
-
Justin Maggard authored
When defragging a very large file, the cluster variable can wrap its 32-bit signed int type and become negative, which eventually gets passed to btrfs_force_ra() as a very large unsigned long value. On 32-bit platforms, this eventually results in an Oops from the SLAB allocator. Change the cluster and max_cluster signed int variables to unsigned long to match the readahead functions. This also allows the min() comparison in btrfs_defrag_file() to work as intended. Signed-off-by:
-
David Sterba authored
Signed-off-by:
-
David Sterba authored
The COMPRESS_LZOv2 incompat featue is currently not implemented, the bit is only reserved, no point to list it in sysfs. Signed-off-by:
-
David Sterba authored
The owner and capability checks in IOC_SUBVOL_SETFLAGS and SET_RECEIVED_SUBVOL should be called before any other checks are done. Also unify the error code to EPERM. Signed-off-by:
-
David Sterba authored
Currently, any user can snapshot any subvolume if the path is accessible and thus indirectly create and keep files he does not own under his direcotries. This is not possible with traditional directories. In security context, a user can snapshot root filesystem and pin any potentially buggy binaries, even if the updates are applied. All the snapshots are visible to the administrator, so it's possible to verify if there are suspicious snapshots. Another more practical problem is that any user can pin the space used by eg. root and cause ENOSPC. Original report: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786 CC: stable@vger.kernel.org Signed-off-by:
-
Miao Xie authored
We allocate the free space from the former block group, not the current one, so should use the former one to output the trace information. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
used_block_group is just used for the space cluster which doesn't belong to the current block group, the other place needn't use it. Or the logic of code seems unclear. Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
It is better that the position of the lock is close to the data which is protected by it, because they may be in the same cache line, we will load less cache lines when we access them. So we rearrange the members' position of btrfs_space_info structure to make the lock be closer to the its data. Signed-off-by:
-
Wang Shilong authored
To search tree root without transaction protection, we should neither search commit root nor skip locking here, fix it. Signed-off-by:
-
Miao Xie authored
The performance of fsync dropped down suddenly sometimes, the main reason of this problem was that we might only flush part dirty pages in a ordered extent, then got that ordered extent, wait for the csum calcucation. But if no task flushed the left part, we would wait until the flusher flushed them, sometimes we need wait for several seconds, it made the performance drop down suddenly. (On my box, it drop down from 56MB/s to 4-10MB/s) This patch improves the above problem by flushing left dirty pages aggressively. Test Environment: CPU: 2CPU * 2Cores Memory: 4GB Partition: 20GB(HDD) Test Command: # sysbench --num-threads=8 --test=fileio --file-num=1 \ > --file-total-size=8G --file-block-size=32768 \ > --file-io-mode=sync --file-fsync-freq=100 \ > --file-fsync-end=no --max-requests=10000 \ > --file-test-mode=rndwr run Signed-off-by:
-
Wang Shilong authored
Steps to reproduce: # mkfs.btrfs -f /dev/sda8 # mount /dev/sda8 /mnt -o flushoncommit # dd if=/dev/zero of=/mnt/data bs=4k count=102400 & # mount /dev/sda8 /mnt -o remount, ro When remounting RW to RO, the logic is to firstly set flag to RO and then commit transaction, however with option flushoncommit enabled,we will do RO check within committing transaction, so we get a transaction abortion here. Actually,here check is wrong, we should check if FS_STATE_ERROR is set, fix it. Reported-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Suggested-by:
-
Filipe David Borba Manana authored
When we are looking for file extent items that intersect the cloning range, for each one that falls completely outside the range, don't release the path and do another full tree search - just move on to the next slot and copy the file extent item into our buffer only if the item intersects the cloning range. Signed-off-by:
-
Liu Bo authored
When transaction is aborted, we fail to commit transaction, instead we do cleanup work. After that when we umount btrfs, we get to free fs roots' log trees respectively, but that happens after we unpin extents, so those extents pinned by freeing log trees will remain in memory and lead to the leak. Signed-off-by:
-
Qu Wenruo authored
Since remount will pending the new mount options to the original mount options, which will make btrfs_parse_options check the old options then new options, causing some stupid output like "enabling XXX" following by "disable XXX". This patch will add extra check before every btrfs_info to skip the output from old options checking. Signed-off-by:
-
Qu Wenruo authored
Add noinode_cache mount option for btrfs. Since inode map cache involves all the btrfs_find_free_ino/return_ino things and if just trigger the mount_opt, an inode number get from inode map cache will not returned to inode map cache. To keep the find and return inode both in the same behavior, a new bit in mount_opt, CHANGE_INODE_CACHE, is introduced for this idea. CHANGE_INODE_CACHE is set/cleared in remounting, and the original INODE_MAP_CACHE is set/cleared according to CHANGE_INODE_CACHE after a success transaction. Since find/return inode is all done between btrfs_start_transaction and btrfs_commit_transaction, this will keep consistent behavior. Also noinode_cache mount option will not stop the caching_kthread. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Wang Shilong authored
There is a bug that using btrfs_previous_item() to search metadata extent item. This is because in btrfs_previous_item(), we need type match, however, since skinny metada was introduced by josef, we may mix this two types. So just use btrfs_previous_item() is not working right. To keep btrfs_previous_item() like normal tree search, i introduce another function btrfs_previous_extent_item(). Signed-off-by:
-
Wang Shilong authored
Check if we support skinny metadata firstly and fix to use right type to search. Signed-off-by:
-
Filipe David Borba Manana authored
It is possible for the send feature to send clone operations that request a cloning range (offset + length) that is not aligned with the block size. This makes the btrfs receive command send issue a clone ioctl call that will fail, as the ioctl will return an -EINVAL error because of the unaligned range. Fix this by not sending clone operations for non block aligned ranges, and instead send regular write operation for these (less common) cases. The following xfstest reproduces this issue, which fails on the second btrfs receive command without this change: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=`mktemp -d` status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { rm -fr $tmp } # get standard environment, filters and checks . ./common/rc . ./common/filter # real QA test starts here _supported_fs btrfs _supported_os Linux _require_scratch _need_to_be_root rm -f $seqres.full _scratch_mkfs >/dev/null 2>&1 _scratch_mount $XFS_IO_PROG -f -c "truncate 819200" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $XFS_IO_PROG -c "falloc -k 819200 667648" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $XFS_IO_PROG -f -c "pwrite 1482752 2978" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $BTRFS_UTIL_PROG subvol snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1 | \ _filter_scratch $XFS_IO_PROG -f -c "truncate 883305" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $BTRFS_UTIL_PROG subvol snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2 | \ _filter_scratch $BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap 2>&1 | _filter_scratch $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \ -f $tmp/2.snap 2>&1 | _filter_scratch md5sum $SCRATCH_MNT/foo | _filter_scratch md5sum $SCRATCH_MNT/mysnap1/foo | _filter_scratch md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch _scratch_unmount _check_btrfs_filesystem $SCRATCH_DEV _scratch_mkfs >/dev/null 2>&1 _scratch_mount $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/1.snap md5sum $SCRATCH_MNT/mysnap1/foo | _filter_scratch $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/2.snap md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch _scratch_unmount _check_btrfs_filesystem $SCRATCH_DEV status=0 exit The tests expected output is: QA output created by 025 FSSync 'SCRATCH_MNT' FSSync 'SCRATCH_MNT' wrote 2978/2978 bytes at offset 1482752 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) FSSync 'SCRATCH_MNT' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' FSSync 'SCRATCH_MNT' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' At subvol SCRATCH_MNT/mysnap1 At subvol SCRATCH_MNT/mysnap2 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/foo 42b6369eae2a8725c1aacc0440e597aa SCRATCH_MNT/mysnap1/foo 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/mysnap2/foo At subvol mysnap1 42b6369eae2a8725c1aacc0440e597aa SCRATCH_MNT/mysnap1/foo At snapshot mysnap2 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/mysnap2/foo Signed-off-by:
-
