Merge tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.6, part 2.

- Add DMA nodes for am65x and j721e
- Add McASP nodes for am65x and j721e, showcasing the DMA usage
- Add CAL node for am65x
- Add OV5640 camera support for am65x

* tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
  arm64: dts: ti: k3-am65-main Add CAL node
  arm64: dts: ti: k3-j721e-main: Add McASP nodes
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

Link: https://lore.kernel.org/r/83546942-6215-9c3a-16cd-be7e7c000c0e@ti.comSigned-off-by: Olof Johansson <olof@lixom.net>

Running `make dt_binging_check`, gives the error:

DTC     Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dt.yaml
Error: Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.example.dts:20.41-42 syntax error
FATAL ERROR: Unable to parse input tree

This is because the example uses the macro GPIO_ACTIVE_HIGH which
is defined in gpio.h but the include of this header is missing.
Add the include to fix the error.

Fixes: f6f14960 ("dt-bindings: phy: Add binding for marvell,mmp3-hsic-phy")
Link: https://lore.kernel.org/r/20200124105753.15976-1-dafna.hirschfeld@collabora.comSigned-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM64 SoC DT updates for v5.6

- Add reset-names to NAND controller node

* tag 'uniphier-dt64-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add reset-names to NAND controller node

Link: https://lore.kernel.org/r/CAK7LNASehDHWgOug=Rz0uBBSP2ntJnNLiarfSdj97tZu+OXLkA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM SoC DT updates for v5.6

- Add pinmux nodes for I2C ch5, ch6

- Add reset-names to NAND controller node

* tag 'uniphier-dt-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add reset-names to NAND controller node
  ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6

Link: https://lore.kernel.org/r/CAK7LNARYrzv4QU-eXxqYCcC9dziJmx9F02YNZ3mMnF47EfL3fA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add support for the OV5640 CSI camera:
- add the OV5640 nodes
- add the CAL node linkage
- enable CAL node
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add the nodes for McASP 0-11 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add the ringacc and udmap nodes for main and mcu NAVSS.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Secure proxy (NAVSS0_SEC_PROXY0) and smmu (NAVSS0_TCU) is part of the
Navigator Subsystem.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

NAVSS is a subsystem containing different IPs, it is not really a bus.
Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

On am654 the MAIN NAVSS base address was 0x30800000, but in j721e it is
at 0x30000000
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add the ringacc and udmap nodes for main and mcu NAVSS.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Secure proxy (NAVSS0_SEC_PROXY0) is part of the Navigator Subsystem.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

NAVSS is a subsystem containing different IPs, it is not really a bus.
Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

ARM: dts: zynq: DT changes for v5.6 v2

- Enable coresight topology for Zynq

* tag 'zynq-dt-for-v5.6-v2' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: enablement of coresight topology

Link: https://lore.kernel.org/r/5db334df-89b5-1d07-3884-93f77b0f4e60@monstr.euSigned-off-by: Olof Johansson <olof@lixom.net>

arm64: dts: zynqmp: DT changes for v5.6

- Switch from fixed to firmware based clock driver
- Wire power domain driver
- Wire all ina226 chips through IIO and IIO hwmon drivers
- Add missing dr_mode property to usb nodes
- Use gpio-line-names property instead of comments
- Use clock-output-names for si570 differentiation
- Minor DT fixes

* tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx: (21 commits)
  arm64: zynqmp: Add label property to all ina226 on zcu106
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
  arm64: zynqmp: Add label property to all ina226 on zcu102
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
  arm64: zynqmp: Add label property to all ina226 on zcu111
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
  arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
  arm64: zynqmp: Setup default number of chipselects for zcu100
  arm64: zynqmp: Remove broken-cd from zcu100-revC
  arm64: zynqmp: Fix the si570 clock frequency on zcu111
  arm64: zynqmp: Setup clock-output-names for si570 chips
  arm64: zynqmp: Turn comment to gpio-line-names
  arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104
  arm64: zynqmp: Remove addition number in node name
  arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
  arm64: dts: xilinx: Add the power nodes for zynqmp
  arm64: dts: xilinx: Remove dtsi for fixed clock
  arm64: dts: xilinx: Add the clock nodes for zynqmp
  arm64: zynqmp: Add dr_mode property to usb node
  arm64: dts: zynqmp: Use decimal values for drm-clock properties
  ...

Link: https://lore.kernel.org/r/c70d2efa-9ee2-a764-5248-0e5bfbf29f8a@monstr.euSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.6-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.6

 - Cleanups for dtc warnings

 - Ethernet hardware checksum cleanups. A bug in the driver was fixed so
 machines don't need to specify this anymore.

 - Misc improvements

* tag 'aspeed-5.6-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
  ARM: dts: aspeed: rainier: Switch PSUs to unknown version
  ARM: dts: aspeed: Add SD card for Vesnin
  ARM: dts: aspeed: yamp: Delete no-hw-checksum
  ARM: dts: aspeed: netbmc: Delete no-hw-checksum
  ARM: dts: aspeed: AST2400 disables hw checksum
  ARM: dts: ibm-power9-dual: Add a unit address for OCC nodes
  ARM: dts: aspeed-g6: Cleanup watchdog unit address
  ARM: dts: aspeed-g5: Sort LPC child nodes by unit address
  ARM: dts: aspeed: Add reg hints to syscon children
  ARM: dts: aspeed: Cleanup lpc-ctrl and snoop regs
  ARM: dts: witherspoon: Cleanup gpio-keys-polled properties
  ARM: dts: swift: Cleanup gpio-keys-polled properties
  ARM: dts: fp5280g2: Cleanup gpio-keys-polled properties
  ARM: dts: vesnin: Add unit address for memory node
  ARM: dts: aspeed-g5: Use recommended generic node name for SDMC
  ARM: dts: aspeed-g5: Move EDAC node to APB
  dt-bindings: misc: Document reg for aspeed, p2a-ctrl nodes
  dt-bindings: pinctrl: aspeed: Add reg property as a hint

Link: https://lore.kernel.org/r/CACPK8XepSy6D4CNWjSWDDK0p7Dx_rneWne4t4uyy=di5nx3zmA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 5.6 #2

 - Add sam9x60 dtsi
 - New board sam9x60 Evaluation Kit

* tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sam9x60: add device tree for soc and board
  dt-bindings: arm: add sam9x60-ek board
  dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  dt-bindings: atmel-smc: add microchip,sam9x60-smc
  dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  dt-bindings: atmel-isi: add microchip,sam9x60-isi
  dt-bindings: atmel-can: add microchip,sam9x60-can
  dt-bindings: at_xdmac: add microchip,sam9x60-dma
  dt-bindings: at_xdmac: remove wildcard

Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.netSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.6-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

DSI display for px30 evaluation board and a number of cleanups
accross multiple socs.

* tag 'v5.6-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Kill off "simple-panel" compatibles
  arm64: dts: rockchip: rename dwmmc node names to mmc
  arm64: dts: rockchip: hook up the px30-evb dsi display
  arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine
  arm64: dts: rockchip: add reg property to brcmf sub-nodes
  arm64: dts: rockchip: fix dwmmc clock name for rk3308
  arm64: dts: rockchip: fix dwmmc clock name for px30

Link: https://lore.kernel.org/r/7641353.lIegmeFAIi@philSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Removal of the simple-panel compatible and some minor
additional cleanups.

* tag 'v5.6-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Kill off "simple-panel" compatibles
  ARM: dts: rockchip: rename dwmmc node names to mmc
  ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc

Link: https://lore.kernel.org/r/3473489.DgqFdXXe5V@philSigned-off-by: Olof Johansson <olof@lixom.net>

Change Rainier device tree to use UCD90320 chip and only bind driver to
port which excepts PMBus commands.
Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Rainier can use either version of the IBM CFFPS, so don't set the
version in the devicetree so the driver can detect it automatically.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

"simple-panel" is a Linux driver and has never been an accepted upstream
compatible string, so remove it.

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

"simple-panel" is a Linux driver and has never been an accepted upstream
compatible string, so remove it.

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node,
so change them all to 'mmc'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200115185244.18149-2-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Current dts files with 'dwmmc' nodes are manually verified.
In order to automate this process rockchip-dw-mshc.txt
has to be converted to yaml. In the new setup
rockchip-dw-mshc.yaml will inherit properties from
mmc-controller.yaml and synopsys-dw-mshc-common.yaml.
'dwmmc' will no longer be a valid name for a node,
so change them all to 'mmc'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200115185244.18149-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This pull request contains Broadcom ARM-based SoC changes for 5.6,
please pull the following:

- Nicolas unifies the CMA reserved region declaration between all
  BCM283x/BCM2711 chips in order for firmwares to easily adjust those
  based on the use case needs

- Nicolas adds the Broadcom STB PCIe Root Complex Device Tree node for
  the Raspberry Pi 4. The driver will go through the PCIe maintainers
  pull request for 5.6.

* tag 'arm-soc/for-5.6/devicetree-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711: Enable PCIe controller
  ARM: dts: bcm283x: Unify CMA configuration

Link: https://lore.kernel.org/r/20200117222705.25391-2-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
and "Exynos" names.

"SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked
names.  Therefore they should be written with lowercase letters starting
with capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).

Link: https://lore.kernel.org/r/20200117190305.5257-1-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.6

- Add missing power domains for smmu for J721e
- Add I2C, ADC, OSPI and UFS nodes for J721e
- Add OSPI and MCU syscon nodes for am65x
- Add IRQ line for GPIO expander on am65x

* tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu
  arm64: dts: ti: k3-am65-mcu: add system control module node
  arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander
  arm64: dts: ti: k3-am65: Add OSPI DT node
  arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials

Link: https://lore.kernel.org/r/c5b74bfc-f2f0-1b72-4a3c-4c1d478a023a@ti.comSigned-off-by: Olof Johansson <olof@lixom.net>

The Denali NAND controller IP has separate reset control for the
controller core and registers.

Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The Denali NAND controller IP has separate reset control for the
controller core and registers.

Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add power-domains entry for smmu, so that the it is accessible as long
as the driver is active. Without this device shutdown is throwing the
below warning:
"[   44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0"
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

The MCU System control module support is added to the device tree to allow
drivers to access to their System control module registers.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Add IRQ line for IO expander present on wkup_i2c bus on  AM654 EVM
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

AM654 SoC has two Cadence OSPI controller instances under Flash
subsystem (FSS). Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

Merge tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

More dts changes for omaps for v5.6 merge window

Add basic support for first generation Amazon omap3-echo. This got
applied rather late as we discussed how to deal with SoC variants
with some accelerators unaccessible, and eventually ended up setting
up few more SoC specific dtsi files. Eventually we'll need to also
detect the disabled accelerators on driver init, but more patching
is needed for that.

* tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Add omap3-echo
  ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725

Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-4Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.6/sdma-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Fix omap sdma handling for missing auxdata for v5.6 merge window

Turns out I was overly optimistic about making platform data optional, and
we still need it to pass various quirk flags. If the platform data is missing
for whatever reason, we will currently try to access non-existing data later
on.

* tag 'omap-for-v5.6/sdma-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  dmaengine: ti: omap-dma: don't allow a null od->plat pointer to be dereferenced

Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Remove fixed clock and source common clock for UART controllers.

Link: https://lore.kernel.org/r/20200114040311.6599-3-manivannan.sadhasivam@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>