Skip to content

L
linux
Switch branch/tag
  1. 23 Oct, 2020 3 commits
  3. 21 Oct, 2020 3 commits
  5. 20 Oct, 2020 13 commits
    • Juergen Gross's avatar
      xen/events: block rogue events for some time · 5f7f7740
      Juergen Gross authored 
      In order to avoid high dom0 load due to rogue guests sending events at
high frequency, block those events in case there was no action needed
in dom0 to handle the events.

This is done by adding a per-event counter, which set to zero in case
an EOI without the XEN_EOI_FLAG_SPURIOUS is received from a backend
driver, and incremented when this flag has been set. In case the
counter is 2 or higher delay the EOI by 1 << (cnt - 2) jiffies, but
not more than 1 second.

In order not to waste memory shorten the per-event refcnt to two bytes
(it should normally never exceed a value of 2). Add an overflow check
to evtchn_get() to make sure the 2 bytes really won't overflow.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      5f7f7740
    • Juergen Gross's avatar
      xen/events: defer eoi in case of excessive number of events · e99502f7
      Juergen Gross authored 
      In case rogue guests are sending events at high frequency it might
happen that xen_evtchn_do_upcall() won't stop processing events in
dom0. As this is done in irq handling a crash might be the result.

In order to avoid that, delay further inter-domain events after some
time in xen_evtchn_do_upcall() by forcing eoi processing into a
worker on the same cpu, thus inhibiting new events coming in.

The time after which eoi processing is to be delayed is configurable
via a new module parameter "event_loop_timeout" which specifies the
maximum event loop time in jiffies (default: 2, the value was chosen
after some tests showing that a value of 2 was the lowest with an
only slight drop of dom0 network throughput while multiple guests
performed an event storm).

How long eoi processing will be delayed can be specified via another
parameter "event_eoi_delay" (again in jiffies, default 10, again the
value was chosen after testing with different delay values).

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      e99502f7
    • Juergen Gross's avatar
      xen/events: use a common cpu hotplug hook for event channels · 7beb290c
      Juergen Gross authored 
      Today only fifo event channels have a cpu hotplug callback. In order
to prepare for more percpu (de)init work move that callback into
events_base.c and add percpu_init() and percpu_deinit() hooks to
struct evtchn_ops.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      7beb290c
    • Juergen Gross's avatar
      xen/events: switch user event channels to lateeoi model · c44b849c
      Juergen Gross authored 
      Instead of disabling the irq when an event is received and enabling
it again when handled by the user process use the lateeoi model.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Tested-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      c44b849c
    • Juergen Gross's avatar
      xen/pciback: use lateeoi irq binding · c2711441
      Juergen Gross authored 
      In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pcifront use the lateeoi irq
binding for pciback and unmask the event channel only just before
leaving the event handling function.

Restructure the handling to support that scheme. Basically an event can
come in for two reasons: either a normal request for a pciback action,
which is handled in a worker, or in case the guest has finished an AER
request which was requested by pciback.

When an AER request is issued to the guest and a normal pciback action
is currently active issue an EOI early in order to be able to receive
another event when the AER request has been finished by the guest.

Let the worker processing the normal requests run until no further
request is pending, instead of starting a new worker ion that case.
Issue the EOI only just before leaving the worker.

This scheme allows to drop calling the generic function
xen_pcibk_test_and_schedule_op() after processing of any request as
the handling of both request types is now separated more cleanly.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      c2711441
    • Juergen Gross's avatar
      xen/pvcallsback: use lateeoi irq binding · c8d647a3
      Juergen Gross authored 
      In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pvcallsfront use the lateeoi
irq binding for pvcallsback and unmask the event channel only after
handling all write requests, which are the ones coming in via an irq.

This requires modifying the logic a little bit to not require an event
for each write request, but to keep the ioworker running until no
further data is found on the ring page to be processed.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      c8d647a3
    • Juergen Gross's avatar
      xen/scsiback: use lateeoi irq binding · 86991b6e
      Juergen Gross authored 
      In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving scsifront use the lateeoi
irq binding for scsiback and unmask the event channel only just before
leaving the event handling function.

In case of a ring protocol error don't issue an EOI in order to avoid
the possibility to use that for producing an event storm. This at once
will result in no further call of scsiback_irq_fn(), so the ring_error
struct member can be dropped and scsiback_do_cmd_fn() can signal the
protocol error via a negative return value.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      86991b6e
    • Juergen Gross's avatar
      xen/netback: use lateeoi irq binding · 23025393
      Juergen Gross authored 
      In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving netfront use the lateeoi
irq binding for netback and unmask the event channel only just before
going to sleep waiting for new events.

Make sure not to issue an EOI when none is pending by introducing an
eoi_pending element to struct xenvif_queue.

When no request has been consumed set the spurious flag when sending
the EOI for an interrupt.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      23025393
    • Juergen Gross's avatar
      xen/blkback: use lateeoi irq binding · 01263a1f
      Juergen Gross authored 
      In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving blkfront use the lateeoi
irq binding for blkback and unmask the event channel only after
processing all pending requests.

As the thread processing requests is used to do purging work in regular
intervals an EOI may be sent only after having received an event. If
there was no pending I/O request flag the EOI as spurious.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      01263a1f
    • Juergen Gross's avatar
      xen/events: add a new "late EOI" evtchn framework · 54c9de89
      Juergen Gross authored 
      In order to avoid tight event channel related IRQ loops add a new
framework of "late EOI" handling: the IRQ the event channel is bound
to will be masked until the event has been handled and the related
driver is capable to handle another event. The driver is responsible
for unmasking the event channel via the new function xen_irq_lateeoi().

This is similar to binding an event channel to a threaded IRQ, but
without having to structure the driver accordingly.

In order to support a future special handling in case a rogue guest
is sending lots of unsolicited events, add a flag to xen_irq_lateeoi()
which can be set by the caller to indicate the event was a spurious
one.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Reported-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      54c9de89
    • Juergen Gross's avatar
      xen/events: fix race in evtchn_fifo_unmask() · f0133719
      Juergen Gross authored 
      Unmasking a fifo event channel can result in unmasking it twice, once
directly in the kernel and once via a hypercall in case the event was
pending.

Fix that by doing the local unmask only if the event is not pending.

This is part of XSA-332.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJan Beulich <jbeulich@suse.com>
      f0133719
    • Juergen Gross's avatar
      xen/events: add a proper barrier to 2-level uevent unmasking · 4d3fe31b
      Juergen Gross authored 
      A follow-up patch will require certain write to happen before an event
channel is unmasked.

While the memory barrier is not strictly necessary for all the callers,
the main one will need it. In order to avoid an extra memory barrier
when using fifo event channels, mandate evtchn_unmask() to provide
write ordering.

The 2-level event handling unmask operation is missing an appropriate
barrier, so add it. Fifo event channels are fine in this regard due to
using sync_cmpxchg().

This is part of XSA-332.

Cc: stable@vger.kernel.org
Suggested-by: default avatarJulien Grall <julien@xen.org>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarJulien Grall <jgrall@amazon.com>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      4d3fe31b
    • Juergen Gross's avatar
      xen/events: avoid removing an event channel while handling it · 073d0552
      Juergen Gross authored 
      Today it can happen that an event channel is being removed from the
system while the event handling loop is active. This can lead to a
race resulting in crashes or WARN() splats when trying to access the
irq_info structure related to the event channel.

Fix this problem by using a rwlock taken as reader in the event
handling loop and as writer when deallocating the irq_info structure.

As the observed problem was a NULL dereference in evtchn_from_irq()
make this function more robust against races by testing the irq_info
pointer to be not NULL before dereferencing it.

And finally make all accesses to evtchn_to_irq[row][col] atomic ones
in order to avoid seeing partial updates of an array element in irq
handling. Note that irq handling can be entered only for event channels
which have been valid before, so any not populated row isn't a problem
in this regard, as rows are only ever added and never removed.

This is XSA-331.

Cc: stable@vger.kernel.org
Reported-by: default avatarMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reported-by: default avatarJinoh Kang <luke1337@theori.io>
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: default avatarWei Liu <wl@xen.org>
      073d0552
  7. 04 Oct, 2020 7 commits
  9. 03 Oct, 2020 10 commits
  11. 02 Oct, 2020 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7