- 10 Mar, 2017 35 commits
-
-
Ido Schimmel authored
We always pass the same event type to fib_notify() and fib_rules_notify(), so we can safely drop this argument. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Most of the code concerned with the FIB notification chain currently resides in fib_trie.c, but this isn't really appropriate, as the FIB notification chain is also used for FIB rules. Therefore, it makes sense to move the common FIB notification code to a separate file and have it export the relevant functions, which can be invoked by its different users (e.g., fib_trie.c, fib_rules.c). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Preparations for VRF offload Ido says: This patchset aims to prepare the mlxsw driver for VRF offload. The follow-up patchsets that introduce VRF support can be found here: https://github.com/idosch/linux/tree/idosch-next The first four patches are mainly concerned with the netdevice notification block. There are no functional changes, but merely restructuring to more easily integrate VRF enslavement. Patches 5-10 remove various assumptions throughout the code about a single virtual router (VR) and also restructure the internal data structures to more accurately represent the device's operation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When the abort mechanism is invoked it binds the first virtual router (VR) to an LPM tree and inserts a default route to direct packets to the CPU. With VRFs, we can have router interfaces (RIFs) bound to multiple VRs, so we need to make sure packets are trapped from all VRs and not just the first one. Upon abort invocation, bind all active VRs to the same LPM tree and insert a default route in each. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Up until now we implicitly associated all the router interfaces (RIFs) with the first virtual router (VR). This must be changed in order to enable VRF offload. Otherwise, a packet received via a VRF slave would do a FIB lookup in the same table used by other VRFs. Instead, bind the RIF to a VR according to the table where FIB lookup should be performed for packets received via the RIF. Currently, we only care about the MAIN and LOCAL tables (which we squash together). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
A virtual router (VR) is an entity within the device to which routing tables and interfaces can be bound to. It can be used to implement VRFs. In the initial implementation we associated the VR with a specific protocol (e.g., IPv4) and an LPM tree. However, this isn't really accurate, as the same VR can be used for both IPv4 and IPv6 traffic, by binding a different LPM tree to a {VR, Proto} pair. This patch aims to restructure the VR code according to the above logic, so that VRs are more accurately represented by the driver's data structures. The main motivation behind this change is to prepare the driver for VRF offload. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When looking for a new LPM tree we should always consider all the unused trees. It doesn't matter if the new tree is required due to changes in currently used prefixes inside an existing routing table or because a route was inserted into an empty table. Both cases are functionally identical and therefore should be treated the same. When looking for a new LPM tree, consider all unused trees and don't reserve trees for specific cases. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The inetaddr notification block is currently implemented in the main driver file, but this isn't really appropriate, as it mainly creates and destroys router interfaces (RIFs) which belong with the rest of the router code. This will become even more apparent later on when we'll need to bind these RIFs to virtual routers according to the VRF's table. Structure the driver better and prevent unnecessary function exports by moving the RIF related code with the rest of the router code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Allow 'unreachable', 'blackhole' and 'prohibit' route types to be programmed into the device by sending any packet hitting them to the CPU. This is needed so that users will be able to program a default route into the VRF's table, thereby preventing lookup from leaking to other tables. Audit the code paths to make sure we don't rely on the presence of a nexthop netdev, as it doesn't exist for above mentioned route types. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
We only use the RIF reference count to determine when the last IP address was removed, but instead we can just test 'in_dev->ifa_list'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When a VLAN device is configured on top of a LAG device (f.e., bond0.10), a vPort is created on top of each of the LAG's slaves and its 'dev' pointer is set to the VLAN device. This is in contrast to the implicit PVID vPort (representing 'bond0'), whose 'dev' pointer keeps pointing to the port netdev itself (f.e., 'sw1p1'). Make both cases consistent by setting their 'dev' pointer to the actual netdev they represent. Either the LAG device itself (in the case of the PVID vPort) or the VLAN device on top of it. This will later allow us to more easily understand for which netdev we should create the router interface (RIF) upon enslavement to a VRF master. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When an upper device is configured on top of a vPort we make sure it's a bridge master during PRECHANGEUPPER and fail otherwise. Therefore, when CHANGEUPPER is later received we don't bother checking the upper's type. Make the code more extendable in preparation for VRF uppers, by checking the upper's type. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
We're going to allow bridges stacked on top of port netdevs to be enslaved to a VRF, but for now, only VLAN uppers of the VLAN-aware bridge are supported. Sanitize any other bridge upper. This is consistent with the way we sanitize port netdevs' uppers. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum: Add support for VLAN offload for cls_flower This patchset adds support to offload VLAN modify TC action and adds support to offload cls_flower rules that include VID and PCP matching. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Introduce MLXSW_AFK_ELEMENT_VID, PCP and declare them in afk_element infos that contain them. Use the elements when VLAD ID or priority are used in the flow. Also add MLXSW_AFK_ELEMENT_VID, PCP to mlxsw_sp_acl_tcam_pattern_ipv4. Both items are included in mlxsw_sp_afk_element_info_l2_dmac, resp. _smac, and both MLXSW_AFK_ELEMENT_SMAC and _DMAC are already in the pattern. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Add VLAN action offloading. Invoke it from Spectrum flower handler for "vlan modify" actions. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Kodanev authored
The functions that are returning tcp sequence number also setup TS offset value, so rename them to better describe their purpose. No functional changes in this patch. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergey Shcherbakov authored
In original driver was implemented support for half- and full-duplex modes, but it was not enabled. Instead of it ks8851_rx_1msg method always returns "true" that means "full-duplex" mode. This patch replaces hard-coded functionality with flexible solution that supports both SPI modes. Signed-off-by: Sergey Shcherbakov <shchers@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mahesh Bandewar says: ==================== bonding: winter cleanup Few cleanup patches that I have accumulated over some time now. (a) First two patches are basically to move the work-queue initialization from every ndo_open / bond_open operation to once at the beginning while port creation. Work-queue initialization is an unnecessary operation for every 'ifup' operation. However we have some mode-specific work-queues and mode can change anytime after port creation. So the second patch is to ensure the correct work-handler is called based on the mode. (b) Third patch is simple and straightforward that removes hard-coded value that was added into the initial commit and replaces it with the default value configured. (c) The final patch in the series removes the unimplemented "port-moved" state from the LACP state machine. This state is defined but never set so removing from the state machine logic makes code little cleaner. (d) Reduce scope of some global variables to local. Note: None of these patches are making any functional changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
Many of the bond param variables are declared global while it's not really necessary for these variables to be global. So moving them to the location these are used. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
LACP state-machine defines "port-moved" state when the same ActorSystemID and Port are seen in a LACPDU received on different port. The state is never set since it's not implemented. However the state-machine attempts to clear that state occasionally. LACP state machine is already complicated and since this state is not implemented, removing it's checks makes the state-machine little simpler. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
Eliminate hard-coded value and use the default that is set. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
Initializing work-queues every time ifup operation performed is unnecessary and can be performed only once when the port is created. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
In preparation to move the work-queue initialization to port creation from current port_open phase. Work-queue initialization does not make sense every time we do 'ifup/ifdown'. So moving to port creation phase. Arp monitoring work depends on the bonding mode and that is not tied to the port creation and can change anytime during the life after port creation. So this restructuring allows us to move the initialization at creation without losing the ability to arm the correct work for the mode user has selected. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: CRC32 RSS hash, port name reporting and misc fastpath cleanups This series adds support for CRC32 RSS hash function to kernel API of which NFP driver immediately makes use. There is also a .ndo_get_phys_port_name() implementation conforming to switchdev name format. Small patch takes advantage of napi_complete_done()'s return code. Simon provides a fix for potentially trusting values returned from FW too much. A handful of unassuming fast path adjustments is also thrown in to make the upcoming xdp_adjust_head() series easier to review. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Prevent theoretical buffer overrun by returning an error if the number of entries returned by the firmware does not match those present. Also use a common handling error path. Found by inspection. Signed-off-by: Simon Horman <simon.horman@netronome.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We only need FW version in the first cache line of adapter struct because we need to know the metadata format. To save space add a metadata format bit. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Make use of return code from napi_complete_done() to avoid rearming interrupts when busy polling is on. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We really only need the device pointer on the fast path, stash it at the beginning of the adapter structure and move pci_dev pointer down. This saves up a few lines of code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Reorder variables longest to shortest to comply with netdev coding style. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We already print most of ring configuration including descriptors in debugfs, add the few missing pieces and remove debug prints. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NSP reports to us port labels. First id is the id of the physical port, the other one tells us which logical interface is it within a split port. Instead of printing them as string keep them in integer format. Compute which interfaces are part of port split. On netdev side use port labels and split information to provide a .ndo_get_phys_port_name() implementation. We follow the name format of mlxsw which is also suggested in "Port Netdev Naming" section of Documentation/networking/switchdev.txt. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Some firmware images may reuse CRC32 hardware to compute RXHASH. Make sure we report the correct hash function. Note that we don't support changing functions at runtime. That would also require a few more additions to the way the key is set because different functions have different key sizes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
CRC32 engines are usually easily available in hardware and generate OK spread for RSS hash. Add CRC32 RSS hash function to ethtool API. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently the sock queue's spin locks get their lockdep classes by the default init_spin_lock() initializer: all socket families get - usually, see below - a single class for rx, another specific class for tx, etc. This can lead to false positive lockdep splat, as reported by Andrey. Moreover there are two separate initialization points for the sock queues, one in sk_clone_lock() and one in sock_init_data(), so that e.g. the rx queue lock can get one of two possible, different classes, depending on the socket being cloned or not. This change tries to address the above, setting explicitly a per address family lockdep class for each queue's spinlock. Also, move the duplicated initialization code to a single location. v1 -> v2: - renamed the init helper rfc -> v1: - no changes, tested with several different workload Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Mar, 2017 5 commits
-
-
Jie Deng authored
Synopsys provides a new DesignWare Core Enterprise Ethernet MAC IP (DWC-XLGMAC) for Ethernet designs. It is compliant with the IEEE 802.3-2012 specifications, including IEEE 802.3ba and consortium specifications. This patch provides the initial 25G/40G/50G/100G Ethernet driver for Synopsys XLGMAC IP Prototyping Kit. Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene-v2: Add RGMII based 1G driver This patch set adds support for RGMII based 1GbE hardware which uses a linked list of DMA descriptor architecture (v2) for APM X-Gene SoCs. v4: Address review comments from v3 - fixed local variable declarations to reverse christmas tree order v3: Address review comments from v2 - fixed kbuild warnings (this 'if' clause does not guard) v2: Address review comments from v1 - moved create_desc_ring and delete_desc_ring to open() and close() respectively - changed to use dma_zalloc APIs - fixed tx_timeout() - removed tx completion polling upper bound - added error checking on rx packets - added netif_stop_queue() and netif_wake_queue() v1: - Initial version ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch adds a MAINTAINERS entry for the ethernet driver for the on-chip ethernet interface which uses a linked list of DMA descriptor architecture (v2) for APM X-Gene SoCs. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch adds, - Transmit - Transmit completion poll - Receive poll - NAPI handler and enables the driver. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch adds, - probe, remove, shutdown - open, close and stats - create and delete ring - request and delete irq Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-