- 16 Oct, 2018 20 commits
-
-
Pieter Jansen van Vuuren authored
Previously we only allowed a single header key per pedit action to change the header. This used to result in the last header key in the pedit action to overwrite previous headers. We now keep track of them and allow multiple header keys per pedit action. Fixes: c0b1bd9a ("nfp: add set ipv4 header action flower offload") Fixes: 354b82bb ("nfp: add set ipv6 source and destination address") Fixes: f8b7b0a6 ("nfp: add set tcp and udp header action flower offload") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pieter Jansen van Vuuren authored
Previously we did not correctly change headers when using multiple pedit actions with partial masks. We now take this into account and no longer just commit the last pedit action. Fixes: c0b1bd9a ("nfp: add set ipv4 header action flower offload") Signed-off-by:
-
David Howells authored
Fix a missing call to rxrpc_put_peer() on the main path through the rxrpc_error_report() function. This manifests itself as a ref leak whenever an ICMP packet or other error comes in. In commit f3344303, the hand-off of the ref to a work item was removed and was not replaced with a put. Fixes: f3344303 ("rxrpc: Fix error distribution") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Xin Long authored
Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu is also processing transport pmtu_pending by icmp packets. But it's meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport. The right pmtu value should come from the icmp packet, and it would be saved into transport->mtu_info in this patch and used later when the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config. Besides, without this patch, as pmtu can only be updated correctly when receiving a icmp packet and no place is holding sock lock, it will take long time if the sock is busy with sending packets. Note that it doesn't process transport->mtu_info in .release_cb(), as there is no enough information for pmtu update, like for which asoc or transport. It is not worth traversing all asocs to check pmtu_pending. So unlike tcp, sctp does this in tx path, for which mtu_info needs to be atomic_t. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Fugang Duan authored
Commit db65f35f ("net: fec: add support of ethtool get_regs") introduce ethool "--register-dump" interface to dump all FEC registers. But not all silicon implementations of the Freescale FEC hardware module have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start Register) register, so we should not be trying to dump them on those that don't. To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before dump those RX FIFO registers. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_INFO message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Eric Dumazet authored
syzbot found a use-after-free in inet6_mc_check [1] The problem here is that inet6_mc_check() uses rcu and read_lock(&iml->sflock) So the fact that ip6_mc_leave_src() is called under RTNL and the socket lock does not help us, we need to acquire iml->sflock in write mode. In the future, we should convert all this stuff to RCU. [1] BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline] BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649 Read of size 8 at addr ffff8801ce7f2510 by task syz-executor0/22432 CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 ipv6_addr_equal include/net/ipv6.h:521 [inline] inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649 __raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98 ipv6_raw_deliver net/ipv6/raw.c:183 [inline] raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240 ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426 ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126 napi_frags_finish net/core/dev.c:5664 [inline] napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737 tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968 call_write_iter include/linux/fs.h:1808 [inline] do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1f1/0x360 fs/read_write.c:1004 do_writev+0x11a/0x310 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457421 Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007f2d30ecaba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 000000000000003e RCX: 0000000000457421 RDX: 0000000000000001 RSI: 00007f2d30ecabf0 RDI: 00000000000000f0 RBP: 0000000020000500 R08: 00000000000000f0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f2d30ecb6d4 R13: 00000000004c4890 R14: 00000000004d7b90 R15: 00000000ffffffff Allocated by task 22437: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3718 [inline] __kmalloc+0x14e/0x760 mm/slab.c:3727 kmalloc include/linux/slab.h:518 [inline] sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983 ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427 do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038 __sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 22430: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3813 __sock_kfree_s net/core/sock.c:2004 [inline] sock_kfree_s+0x29/0x60 net/core/sock.c:2010 ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448 __ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310 ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328 inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452 __sock_release+0xd7/0x250 net/socket.c:579 sock_close+0x19/0x20 net/socket.c:1141 __fput+0x385/0xa30 fs/file_table.c:278 ____fput+0x15/0x20 fs/file_table.c:309 task_work_run+0x1e8/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:193 [inline] exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801ce7f2500 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff8801ce7f2500, ffff8801ce7f25c0) The buggy address belongs to the page: page:ffffea000739fc80 count:1 mapcount:0 mapping:ffff8801da800040 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040 raw: 0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Tung Nguyen authored
The binding table's 'cluster_scope' list is rcu protected to handle races between threads changing the list and those traversing the list at the same moment. We have now found that the function named_distribute() uses the regular list_for_each() macro to traverse the said list. Likewise, the function tipc_named_withdraw() is removing items from the same list using the regular list_del() call. When these two functions execute in parallel we see occasional crashes. This commit fixes this by adding the missing _rcu() suffixes. Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David Howells authored
The udpv6_encap_enable() function is part of the ipv6 code, and if that is configured as a loadable module and rxrpc is built in then a build failure will occur because the conditional check is wrong: net/rxrpc/local_object.o: In function `rxrpc_lookup_local': local_object.c:(.text+0x2688): undefined reference to `udpv6_encap_enable' Use the correct config symbol (CONFIG_AF_RXRPC_IPV6) in the conditional check rather than CONFIG_IPV6 as that will do the right thing. Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook") Reported-by: kbuild-all@01.org Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sabrina Dubroca authored
When commit 27097255 ("[IPV6]: ROUTE: Add Router Reachability Probing (RFC4191).") introduced router probing, the rt6_probe() function required that a neighbour entry existed. This neighbour entry is used to record the timestamp of the last probe via the ->updated field. Later, commit 2152caea ("ipv6: Do not depend on rt->n in rt6_probe().") removed the requirement for a neighbour entry. Neighbourless routes skip the interval check and are not rate-limited. This patch adds rate-limiting for neighbourless routes, by recording the timestamp of the last probe in the fib6_info itself. Fixes: 2152caea ("ipv6: Do not depend on rt->n in rt6_probe().") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Florian Fainelli authored
On GENETv5, there is a hardware issue which prevents the GENET hardware from generating a link UP interrupt when the link is operating at 10Mbits/sec. Since we do not have any way to configure the link detection logic, fallback to polling in that case. Fixes: 42138085 ("net: bcmgenet: add support for the GENETv5 hardware") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: net/rxrpc/output.c: In function 'rxrpc_reject_packets': net/rxrpc/output.c:527:11: warning: variable 'ioc' set but not used [-Wunused-but-set-variable] 'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response packet. Fixes: ece64fec ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David Howells authored
Fix an uninitialised variable introduced by the last patch. This can cause a crash when a new call comes in to a local service, such as when an AFS fileserver calls back to the local cache manager. Fixes: c1e15b49 ("rxrpc: Fix the packet reception routine") Signed-off-by:
-
Jon Maloy authored
In the commit referred to below we added link tolerance as an additional criteria for declaring broadcast transmission "stale" and resetting the unicast links to the affected node. Unfortunately, this 'improvement' introduced two bugs, which each and one alone cause only limited problems, but combined lead to seemingly stochastic unicast link resets, depending on the amount of broadcast traffic transmitted. The first issue, a missing initialization of the 'tolerance' field of the receiver broadcast link, was recently fixed by commit 047491ea ("tipc: set link tolerance correctly in broadcast link"). Ths second issue, where we omit to reset the 'stale_cnt' field of the same link after a 'stale' period is over, leads to this counter accumulating over time, and in the absence of the 'tolerance' criteria leads to the above described symptoms. This commit adds the missing initialization. Fixes: a4dc70d4 ("tipc: extend link reset criteria for stale packet retransmission") Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Cong Wang authored
WHen an llc sock is added into the sk_laddr_hash of an llc_sap, it is not marked with SOCK_RCU_FREE. This causes that the sock could be freed while it is still being read by __llc_lookup_established() with RCU read lock. sock is refcounted, but with RCU read lock, nothing prevents the readers getting a zero refcnt. Fix it by setting SOCK_RCU_FREE in llc_sap_add_socket(). Reported-by: syzbot+11e05f04c15e03be5254@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-10-10 This pull request includes some fixes to mlx5 driver, Please pull and let me know if there's any problem. For -stable v4.11: ('net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type') For -stable v4.17: ('net/mlx5: Fix memory leak when setting fpga ipsec caps') For -stable v4.18: ('net/mlx5: WQ, fixes for fragmented WQ buffers API') ==================== Signed-off-by: -
Davide Caratti authored
Similarly to what has been done in 8b4c3cdd ("net: sched: Add policy validation for tc attributes"), fix classifier code to add validation of TCA_CHAIN and TCA_KIND netlink attributes. tested with: # ./tdc.py -c filter v2: Let sch_api and cls_api share nla_policy they have in common, thanks to David Ahern. v3: Avoid EXPORT_SYMBOL(), as validation of those attributes is not done by TC modules, thanks to Cong Wang. While at it, restore the 'Delete / get qdisc' comment to its orginal position, just above tc_get_qdisc() function prototype. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Wenwen Wang authored
In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the use-space buffer 'useraddr' and checked to see whether it is ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next, according to 'sub_cmd', a permission check is enforced through the function ns_capable(). For example, the permission check is required if 'sub_cmd' is ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be done by anyone". The following execution invokes different handlers according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE, ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel object 'per_queue_opt' is copied again from the user-space buffer 'useraddr' and 'per_queue_opt.sub_command' is used to determine which operation should be performed. Given that the buffer 'useraddr' is in the user space, a malicious user can race to change the sub-command between the two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then before ethtool_set_per_queue() is called, the attacker changes ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can bypass the permission check and execute ETHTOOL_SCOALESCE. This patch enforces a check in ethtool_set_per_queue() after the second copy from 'useraddr'. If the sub-command is different from the one obtained in the first copy in dev_ethtool(), an error code EINVAL will be returned. Fixes: f38d138a ("net/ethtool: support set coalesce per queue") Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Wenwen Wang authored
In ethtool_get_rxnfc(), the eth command 'cmd' is compared against 'ETHTOOL_GRXFH' to see whether it is necessary to adjust the variable 'info_size'. Then the whole structure of 'info' is copied from the user-space buffer 'useraddr' with 'info_size' bytes. In the following execution, 'info' may be copied again from the buffer 'useraddr' depending on the 'cmd' and the 'info.flow_type'. However, after these two copies, there is no check between 'cmd' and 'info.cmd'. In fact, 'cmd' is also copied from the buffer 'useraddr' in dev_ethtool(), which is the caller function of ethtool_get_rxnfc(). Given that 'useraddr' is in the user space, a malicious user can race to change the eth command in the buffer between these copies. By doing so, the attacker can supply inconsistent data and cause undefined behavior because in the following execution 'info' will be passed to ops->get_rxnfc(). This patch adds a necessary check on 'info.cmd' and 'cmd' to confirm that they are still same after the two copies in ethtool_get_rxnfc(). Otherwise, an error code EINVAL will be returned. Signed-off-by:
-
Jian-Hong Pan authored
Originally, we have an issue where r8169 MSI-X interrupt is broken after S3 suspend/resume on RTL8106e of ASUS X441UAR. 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07) Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast Ethernet controller [1043:200f] Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at e000 [size=256] Memory at ef100000 (64-bit, non-prefetchable) [size=4K] Memory at e0000000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable+ Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00 Capabilities: [170] Latency Tolerance Reporting Kernel driver in use: r8169 Kernel modules: r8169 We found the all of the values in PCI BAR=4 of the ethernet adapter become 0xFF after system resumes. That breaks the MSI-X interrupt. Therefore, we can only fall back to MSI interrupt to fix the issue at that time. However, there is a commit which resolves the drivers getting nothing in PCI BAR=4 after system resumes. It is 04cb3ae895d7 "PCI: Reprogram bridge prefetch registers on resume" by Daniel Drake. After apply the patch, the ethernet adapter works fine before suspend and after resume. So, we can revert the workaround after the commit "PCI: Reprogram bridge prefetch registers on resume" is merged into main tree. This patch reverts commit 7bb05b85 "r8169: don't use MSI-X on RTL8106e". Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201181 Fixes: 7bb05b85 ("r8169: don't use MSI-X on RTL8106e") Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
- 14 Oct, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-10-14 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix xsk map update and delete operation to not call synchronize_net() but to piggy back on SOCK_RCU_FREE for sockets instead as we are not allowed to sleep under RCU, from Björn. 2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process already has unlimited RLIMIT_MEMLOCK, from Eric. ==================== Signed-off-by:
-
- 12 Oct, 2018 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socGreg Kroah-Hartman authored
Arnd writes: "ARM: SoC fixes for 4.19 Two last minute bugfixes, both for NXP platforms: * The Layerscape 'qbman' infrastructure suffers from probe ordering bugs in some configurations, a two-patch series adds a hotfix for this. 4.20 will have a longer set of patches to rework it. * The old imx53-qsb board regressed in 4.19 after the addition of cpufreq support, adding a set of explicit operating points fixes this." * tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: fsl: qman_portals: defer probe after qman's probe soc: fsl: qbman: add APIs to retrieve the probing status ARM: dts: imx53-qsb: disable 1.2GHz OPP -
David Howells authored
Fix a leak of afs_server structs. The routine that installs them in the various lookup lists and trees gets a ref on leaving the function, whether it added the server or a server already exists. It shouldn't increment the refcount if it added the server. The effect of this that "rmmod kafs" will hang waiting for the leaked server to become unused. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
Just drop the "linux" part of the path, it was never correct. Reported-by:
Joe Perches <joe@perches.com> Fixes: 256ac037 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux") Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
The file is GPL v2 or later. Acked-by:
Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by:
-
David Howells authored
Access to the list of cells by /proc/net/afs/cells has a couple of problems: (1) It should be checking against SEQ_START_TOKEN for the keying the header line. (2) It's only holding the RCU read lock, so it can't just walk over the list without following the proper RCU methods. Fix these by using an hlist instead of an ordinary list and using the appropriate accessor functions to follow it with RCU. Since the code that adds a cell to the list must also necessarily change, sort the list on insertion whilst we're at it. Fixes: 989782dc ("afs: Overhaul cell database management") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcGreg Kroah-Hartman authored
Ulf writes: "MMC core: - Avoid fragile multiblock reads for the last sector in SPI mode WIFI/SDIO: - libertas: Fixup suspend sequence for the SDIO card" * tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: libertas: call into generic suspend code before turning off power mmc: block: avoid multiblock reads for the last sector in SPI mode -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioGreg Kroah-Hartman authored
Linus writes: "GPIO fix for the v4.19 series: - Fix up the interrupt parent for the irqdomains." * tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Assign gpio_irq_chip::parents to non-stack pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlGreg Kroah-Hartman authored
Linus writes: "pin control fix for v4.19: A single pin control fix for v4.19: - Interrupt setup in the MCP23S08 driver." * tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: mcp23s08: fix irq and irqchip setup order
-
git://git.infradead.org/linux-mtdGreg Kroah-Hartman authored
Boris writes: "mdt: fix for 4.19-rc8 * Fix a stack overflow in lib/bch.c" * tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd: lib/bch: fix possible stack overrun
-
git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman authored
Dave writes: "drm fixes for 4.19-rc8 single nouveau runtime reference and mst change" * tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaGreg Kroah-Hartman authored
Doug writes: "RDMA fixes: Final for-rc pull request for 4.19 We only have one bug to submit this time around. It fixes a DMA unmap issue where we unmapped the DMA address from the IOMMU before we did from the card, resulting in a DMAR error with IOMMU enabled, or possible crash without." * tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Unmap DMA addr from HCA before IOMMU
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputGreg Kroah-Hartman authored
Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad -
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixesGreg Kroah-Hartman authored
Stephen writes: "A couple of warning fixes: Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>: Commit 6b7dca40 ("tracing: Allow gcov profiling on only ftrace subsystem") uncovered linker problems when using gcov kernel profiling on some architectures. These problems were likely introduced earlier, and are possibly related to compiler changes." * tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes: vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections vmlinux.lds.h: Fix incomplete .text.exit discards -
Arnd Bergmann authored
The previous patch introduced very large kernel stack usage and a Makefile change to hide the warning about it. From what I can tell, a number of things went wrong here: - The BCH_MAX_T constant was set to the maximum value for 'n', not the maximum for 't', which is much smaller. - The stack usage is actually larger than the entire kernel stack on some architectures that can use 4KB stacks (m68k, sh, c6x), which leads to an immediate overrun. - The justification in the patch description claimed that nothing changed, however that is not the case even without the two points above: the configuration is machine specific, and most boards never use the maximum BCH_ECC_WORDS() length but instead have something much smaller. That maximum would only apply to machines that use both the maximum block size and the maximum ECC strength. The largest value for 't' that I could find is '32', which in turn leads to a 60 byte array instead of 2048 bytes. Making it '64' for future extension seems also worthwhile, with 120 bytes for the array. Anything larger won't fit into the OOB area on NAND flash. With that changed, the warning can be enabled again. Only linux-4.19+ contains the breakage, so this is only needed as a stable backport if it does not make it into the release. Fixes: 02361bc7 ("lib/bch: Remove VLA usage") Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
David writes: "Networking 1) RXRPC receive path fixes from David Howells. 2) Re-export __skb_recv_udp(), from Jiri Kosina. 3) Fix refcounting in u32 classificer, from Al Viro. 4) Userspace netlink ABI fixes from Eugene Syromiatnikov. 5) Don't double iounmap on rmmod in ena driver, from Arthur Kiyanovski. 6) Fix devlink string attribute handling, we must pull a copy into a kernel buffer if the lifetime extends past the netlink request. From Moshe Shemesh. 7) Fix hangs in RDS, from Ka-Cheong Poon. 8) Fix recursive locking lockdep warnings in tipc, from Ying Xue. 9) Clear RX irq correctly in socionext, from Ilias Apalodimas. 10) bcm_sf2 fixes from Florian Fainelli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: dsa: bcm_sf2: Call setup during switch resume net: dsa: bcm_sf2: Fix unbind ordering net: phy: sfp: remove sfp_mutex's definition r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips net: socionext: clear rx irq correctly net/mlx4_core: Fix warnings during boot on driverinit param set failures tipc: eliminate possible recursive locking detected by LOCKDEP selftests: udpgso_bench.sh explicitly requires bash selftests: rtnetlink.sh explicitly requires bash. qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface tipc: queue socket protocol error messages into socket receive buffer tipc: set link tolerance correctly in broadcast link net: ipv4: don't let PMTU updates increase route MTU net: ipv4: update fnhe_pmtu when first hop's MTU changes net/ipv6: stop leaking percpu memory in fib6 info rds: RDS (tcp) hangs on sendto() to unresponding address net: make skb_partial_csum_set() more robust against overflows devlink: Add helper function for safely copy string param devlink: Fix param cmode driverinit for string type devlink: Fix param set handling for string type ...
-
- 11 Oct, 2018 4 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple of fixes Here are two fixes for the bcm_sf2 driver that were found during testing unbind and analysing another issue during system suspend/resume. ==================== Signed-off-by: -
Florian Fainelli authored
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by:
-
Florian Fainelli authored
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by:
-
Peter Oberparleiter authored
Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and CONFIG_GCOV_PROFILE_ALL=y results in linker warnings: warning: orphan section `.data..LPBX1' being placed in section `.data..LPBX1'. LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This option causes GCC to create separate data sections for data objects, including those generated by GCC internally for gcov profiling. The names of these objects start with a dot (.LPBX0, .LPBX1), resulting in section names starting with 'data..'. As section names starting with 'data..' are used for specific purposes in the Linux kernel, the linker script does not automatically include them in the output data section, resulting in the "orphan section" linker warnings. Fix this by specifically including sections named "data..LPBX*" in the data section. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
