An error occurred fetching the project authors.
- 05 Jul, 2008 11 commits
-
-
Juergen Beisert authored
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Juergen Beisert authored
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
-
Sascha Hauer authored
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Juergen Beisert authored
Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
-
Sascha Hauer authored
This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
Add platform specific init functions. Also rename the struct platform_device dev into pdev. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
We assumed a 16MHz reference frequency for the UART. While this is true for i.MX1 most of the time it is not true for MX27/MX31. Also, add handling for the ONEMS register which is present on newer versions of the chip and pass a sane minimum baudrate to uart_get_baud_rate(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
Sascha Hauer authored
do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-
- 04 Jul, 2008 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: adding comment for ipaq forcing number of ports USB: fix Oops on loading ipaq module since 2.6.26 USB: add a pl2303 device id USB: another option device id USB: don't lose disconnections during suspend USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: New device ID for ftdi_sio driver sisusbvga: Fix oops on disconnect. USB: mass storage: new id for US_SC_CYP_ATACB USB: ohci - record data toggle after unlink USB: ehci - fix timer regression USB: fix cdc-acm resume() OHCI: Fix problem if SM501 and another platform driver is selected
-
Oliver Neukum authored
The reason for forcing a number of ports should be documented. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
Fixes bugzilla.kernel.org #10868 Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
As reported by Ken A Scott <kscott9@sent.com> Cc: Ken A Scott <kscott9@sent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Thanks to umesh b <umesh.kollam@gmail.com> for the information here. Cc: umesh b <umesh.kollam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1111) fixes a bug in the hub driver. When a hub resumes, disconnections that occurred while the hub was suspended are lost. A completely different fix for this problem has already been accepted for 2.6.27; however the problem still needs to be handled in 2.6.26. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Stefan Becker authored
USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jon K Hellan authored
Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Will Newton authored
Remove dev_info call on disconnect. The sisusb_dev pointer may have been set to zero by sisusb_delete at this point causing an oops. The message does not provide any extra information over the standard USB subsystem output so removing it does not affect functionality. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
matthieu castet authored
CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This patch fixes a problem with OHCI where canceling bulk or interrupt URBs may lose track of the right data toggle. This seems to be a longstanding bug, possibly dating back to the Linux 2.4 kernel, which stayed hidden because (a) about half the time the data toggle bit was correct; (b) canceling such URBs is unusual; and (c) the few drivers which cancel these URBs either [1] do it only as part of shutting down, or [2] have fault recovery logic, which recovers. For those transfer types, the toggle is normally written back into the ED when each TD is retired. But canceling bypasses the mechanism used to retire TDs ... so on average, half the time the toggle bit will be invalid after cancelation. The fix is simple: the toggle state of any canceled TDs are propagated back to the ED in the finish_unlinks function. (Issue found by leonidv11@gmail.com ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This patch fixes a regression in the EHCI driver's TIMER_IO_WATCHDOG behavior. The patch "USB: EHCI: add separate IAA watchdog timer" changed how that timer is handled, so that short timeouts on the remaining timer (unfortunately, overloaded) would never be used. This takes a more direct approach, reorganizing the code slightly to be explicit about only the I/O watchdog role now being overridable. It also replaces a now-obsolete comment describing older timer behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
cdc-acm has - a memory leak in resume() - will fail to reactivate the read code path if this is needed. his corrects it by deleting the useless relict code. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ben Dooks authored
If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 03 Jul, 2008 15 commits
-
-
J. Bruce Fields authored
To return garbage_args, the accept_stat must be 0, and we must have a verifier. So we shouldn't be resetting the write pointer as we reject the call. Also, we must add the two placeholder words here regardless of success of the unwrap, to ensure the output buffer is left in a consistent state for svcauth_gss_release(). This fixes a BUG() in svcauth_gss.c:svcauth_gss_release(). Thanks to Aime Le Rouzic for bug report, debugging help, and testing. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Tested-by: Aime Le Rouzic <aime.le-rouzic@bull.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] cevt-txx9: Reset timer counter on initialization [MIPS] IP22: Fix crashes due to wrong L1_CACHE_BYTES [MIPS] IP32: Fix unexpected irq 71
-
Steven Rostedt authored
Due to a possible deadlock, the waking of the softirq was pushed outside of the hrtimer base locks. See commit 0c96c597 Unfortunately this allows the task to migrate after setting up the softirq and raising it. Since softirqs run a queue that is per-cpu we may raise the softirq on the wrong CPU and this will keep the queued softirq task from running. To solve this issue, this patch disables preemption around the releasing of the hrtimer lock and raising of the softirq. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Atsushi Nemoto authored
The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
The introduction of a real dma cache invalidate makes it important to have a correct cache line size, otherwise the kernel will gives out two memory segment, which might share one cache line. The R4400 Indy/Indigo2 CPU modules are using a second level cache line size of 128 bytes, so MIPS_L1_CACHE_SHIFT needs to be bumped up to 7 for IP22. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
It's possible that the crime interrupt handler is called without pending interrupts (probably a hardware issue). To avoid irritating "unexpected irq 71" messages, we now just ignore the spurious crime interrupts. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix O_APPEND in legacy mode
-
Mel Gorman authored
The non-NUMA case of build_zonelist_cache() would initialize the zlcache_ptr for both node_zonelists[] to NULL. Which is problematic, since non-NUMA only has a single node_zonelists[] entry, and trying to zero the non-existent second one just overwrote the nr_zones field instead. As kswapd uses this value to determine what reclaim work is necessary, the result is that kswapd never reclaims. This causes processes to stall frequently in low-memory situations as they always direct reclaim. This patch initialises zlcache_ptr correctly. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Tested-by: Dan Williams <dan.j.williams@intel.com> [ Simplified patch a bit ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Van Hensbergen authored
The legacy protocol's open operation doesn't handle an append operation (it is expected that the client take care of it). We were incorrectly passing the extended protocol's flag through even in legacy mode. This was reported in bugzilla report #10689. This patch fixes the problem by disallowing extended protocol open modes from being passed in legacy mode and implemented append functionality on the client side by adding a seek after the open. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: acpiphp: cleanup notify handler on all root bridges PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev. PCI: Restrict VPD read permission to root
-
git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds authored
* 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linux: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. I2C: S3C2410: Fixup error codes returned rom a transfer. I2C: S3C2410: Check ACK on byte transmission
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block: Properly notify block layer of sync writes block: Fix the starving writes bug in the anticipatory IO scheduler
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] export account_system_vtime [IA64] Bugfix for system with 32 cpus
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected V4L/DVB (8145a): USB Video Class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix /proc/ide/ide?/mate reporting Revert "BAST: Remove old IDE driver"
-