- 08 Jun, 2016 40 commits
-
-
David Binder authored
Adjusts goto labels to prevent attempts to free unallocated resources. Signed-off-by:
David Binder <david.binder@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Binder authored
Changes the conditional logic by looking for the absence of work to do, instead of the opposite. Signed-off-by:
Tim Sell <Timothy.Sell@unisys.com> Signed-off-by:
-
Tim Sell authored
The prior patch which simplified the visorhba debugfs interface made it so visorhbas_open[] and VISORHBA_OPEN_MAX were no longer needed, so they have now been deleted. Signed-off-by:
-
Tim Sell authored
debugfs info for each visorhba device is now presented by a file named of the following form within the debugfs tree: visorhba/vbus<x>:dev<y>/info where <x> is the vbus number, and <y> is the relative device number. Also, the debugfs presentation function was converted to use the seq_file interface, so that it could access the device context without resorting to a global array. This also simplified the function. Signed-off-by: -
Tim Sell authored
The handling of CMD_NOTIFYGUEST_TYPE messages from the IO partition appears to be only partially implemented, but fortunately it is never used in our current environment. This patch deletes the unused code. Signed-off-by:
-
Tim Sell authored
This patch is necessary to enable ANY task mgmt command to complete successfully via visorhba. When issuing a task mgmt command (CMD_SCSITASKMGMT_TYPE) to the IO partition (back-end), forward_taskmgmt_command() includes pointers within the command area that will be used to wake up the issuing process and provide the result when the command completes: cmdrsp->scsitaskmgmt.notify_handle = (u64)¬ifyevent; cmdrsp->scsitaskmgmt.notifyresult_handle = (u64)¬ifyresult; 'notify_handle' is a pointer to a 'wait_queue_head_t' variable, and 'notifyresult' is a pointer to an int. Both of these are just local stack variables in the issuing process. The way it's supposed to happen is that when the IO partition completes the command, in our completion handling we get copies of those pointers back from the IO partition, where we stash the result of the command at '*notifyresult' (which should not be 0xffff, because that is the initial value that the caller is looking to see a change in), and wake up the wait queue at '*notify_handle'. There are several places we do that dance, but prior to this patch, we always do it WRONG, like: cmdrsp->scsitaskmgmt.notifyresult_handle = TASK_MGMT_FAILED; wake_up_all((wait_queue_head_t *)cmdrsp->scsitaskmgmt.notify_handle); The wake_up_all() part is correct (albeit with the help of the sloppy pointer casting, but that's irrelevant to the bug), but the assignment of 'notifyresult_handle' is WRONG, and SHOULD read: *(int *)(cmdrsp->scsitaskmgmt.notifyresult_handle) = TASK_MGMT_FAILED; Without this change, the caller is NEVER going to notice a change in his local value of 'notifyresult' when he does the: if (!wait_event_timeout(notifyevent, notifyresult != 0xffff, msecs_to_jiffies(45000))) and hence will be timing out EVERY taskmgmt command. This patch also eliminates the need for sloppy casting of pointers back-and-forth between u64 values, with the help of idr_alloc() to provide handles for us. It is the generated int handles we pass to the IO partition to denote our completion context, and these are validated and converted back to the required pointers when the task mgmt commands are returned back to us by the IO partition. == Testing == You must enable dynamic debugging in visorhba (build kernel with 'CONFIG_DYNAMIC_DEBUG=y', provide kernel parameter 'visorhba.dyndbg=+p') to see kernel messages involved with visorhba scsi task mgmt commands, which were added in this patch in the form of a few dev_dbg() / pr_debug() messages. In order to inject faults necessary to get visorhba to actully issue scsi task mgmt commands, you will need to compile a kernel with CONFIG_FAIL_IO_TIMEOUT and friends, in the "Kernel hacking" section: * Enable "Fault-injection framework" * Enable "Fault-injection capability for disk IO" * Enable "Fault-injection capability for faking disk interrupts" * Enable "Debugfs entries for fault-injection capabilities" When running a kernel with those options, you can manually inject a fault that will force a scsi task mgmt command to be issued like this: # mount -t debugfs nodev /sys/kernel/debug # cd /sys/kernel/debug/fail_io_timeout # cat interval 1 # cat probability 0 # cat times 1 # echo 100 >probability # cd /sys/block/sda # l | grep fail -rw-r--r-- 1 root root 4096 May 5 10:53 io-timeout-fail -rw-r--r-- 1 root root 4096 May 5 10:54 make-it-fail # echo 1 >io-timeout-fail # echo 1 >make-it-fail To test this patch, after performing the above steps, I did something to force a block device i/o, then shortly afterwards examined the kernel log. There I found evidence that visorhba had successfully issued a task mgmt command, and that it completed successfully: [ 333.352612] FAULT_INJECTION: forcing a failure. name fail_io_timeout, interval 1, probability 100, space 0, times 1 [ 333.352617] CPU: 0 PID: 295 Comm: vhba_incoming Tainted: G C 4.6.0-rc3-ARCH+ #2 [ 333.352619] Hardware name: Dell Inc. PowerEdge T110/ , BIOS 1.23 12/15/2009 [ 333.352620] 0000000000000000 ffff88001d1a7dd0 ffffffff8125beeb ffffffff818507c0 [ 333.352623] 0000000000000064 ffff88001d1a7df0 ffffffff8128047a ffff8800113462b0 [ 333.352625] ffff88000e523000 ffff88001d1a7e00 ffffffff81241c79 ffff88001d1a7e18 [ 333.352627] Call Trace: [ 333.352634] [<ffffffff8125beeb>] dump_stack+0x4d/0x72 [ 333.352637] [<ffffffff8128047a>] should_fail+0x11a/0x120 [ 333.352641] [<ffffffff81241c79>] blk_should_fake_timeout+0x29/0x30 [ 333.352643] [<ffffffff81241c36>] blk_complete_request+0x16/0x30 [ 333.352654] [<ffffffffa0118b36>] scsi_done+0x26/0x80 [scsi_mod] [ 333.352657] [<ffffffffa014a56c>] process_incoming_rsps+0x2bc/0x770 [visorhba] [ 333.352661] [<ffffffff81095630>] ? wait_woken+0x80/0x80 [ 333.352663] [<ffffffffa014a2b0>] ? add_scsipending_entry+0x100/0x100 [visorhba] [ 333.352666] [<ffffffff81077759>] kthread+0xc9/0xe0 [ 333.352669] [<ffffffff814609d2>] ret_from_fork+0x22/0x40 [ 333.352671] [<ffffffff81077690>] ? kthread_create_on_node+0x180/0x180 [ 364.025672] sd 0:0:1:1: visorhba: initiating type=1 taskmgmt command [ 364.029721] visorhba: notifying initiator with result=0x1 [ 364.029726] sd 0:0:1:1: visorhba: taskmgmt type=1 success; result=0x1 Signed-off-by: -
Tim Sell authored
We never issue SCSI commands of type CMD_VDISKMGMT_TYPE, so there is no need to have code that processes their completions. Signed-off-by:
-
Wolfram Sang authored
Remove svn-ids and fix typos in the licence declaration. Add my copyright to the sdio code which I worked on mainly. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
They were counted but never really used anywhere. Also change the printk to a debug print, since it mostly shows on the expected -ENOMEDIUM on card removal. Signed-off-by:
-
Wolfram Sang authored
The printouts are not needed, the driver core has enough debug output for this if wanted. So, use a helper to save boilerplate code. Signed-off-by:
-
Wolfram Sang authored
trans_start is gone from netdevice, so use the new helper function to set the mark. Signed-off-by:
-
Wolfram Sang authored
List all authors, beautify description, match license to what is stated in file headers, add firmware information. Signed-off-by:
-
Wolfram Sang authored
There is only this card supported, no need to iterate over the table. The resulting firmware filename wasn't used anyway, but came from the config file or hardcoded default. Signed-off-by:
-
Wolfram Sang authored
Unlike the previous patches which are plain indent outcomes, this has some manual fixups to be not overly strict with the 80 char limit. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Let's simply specify the struct to keep in sync with kernel coding style. Signed-off-by:
-
Wolfram Sang authored
We want to remove it, but to do so properly, it is good to have a working example. Needs to be copied to /lib/firmware in order to be used. Signed-off-by:
-
Wolfram Sang authored
Use proper type for size_t. Signed-off-by:
-
Wolfram Sang authored
We have sane defaults, so we don't need to bail out if there is no config file. Note that the config file should go away completely in favour of configuration mechanisms already upstream. Signed-off-by:
-
Wolfram Sang authored
The loop variable was defined but not really used. Fix this. Signed-off-by:
-
Wolfram Sang authored
Move the one debug macro to the generic wlan header. Signed-off-by:
-
Wolfram Sang authored
No need for an open coded one. Signed-off-by:
-
Wolfram Sang authored
I had a problem connecting to a network with a short preamble, so let's make the safer option the default. Signed-off-by:
-
Wolfram Sang authored
My Spectec SDW823 card oopsed when it was already inserted during boot. When debugging this, I noticed that the card init was done in a seperate workqueue which was only activated once in probe. After removing the workqueue and calling the card init directly from probe, the OOPS went away. It turned out this is the same OOPS which happened when removing the card, so this seems possible now. Note: There is still a not-understood card-removed event during boot, but at least it doesn't crash anymore and the card will be re-probed right away. Signed-off-by:
-
Wolfram Sang authored
No need to be backwards compatible. Signed-off-by:
-
Wolfram Sang authored
We are by far newer than that anyhow. Signed-off-by:
-
Wolfram Sang authored
FW_LOADER works fine, no need for a open coded fallback. Signed-off-by:
-
Wolfram Sang authored
I couldn't find any trace of code or even products using ks7010 with something else than SDIO. So, remove the conditionals. Signed-off-by:
-
Wolfram Sang authored
See the TODO for details where this driver came from. Only a few minor changes were made to make the driver suitable for staging: * updated Kconfig help text and dependencies * added TODO * removed two __DATE__ and __TIME__ printouts to allow reproducible builds * added to staging main Kconfig + Makefile Tested on a Renesas Salvator-X board with a Spectec SDW-823 card. I could connect to a WPA-protected network. Signed-off-by:
-
Tobin C Harding authored
A number of function definitions were found to be candidates for static scoping. This patch adds static to these functions. Signed-off-by:
Tobin C Harding <me@tobin.cc> Signed-off-by:
-
Oleg Drokin authored
There was a proper debugging function by that name that's long gone. The currently remaining shadow that always returns true is not really useful so it could be dropped along with all the asserts it is part of. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
