1. 20 Sep, 2018 11 commits
  2. 19 Sep, 2018 5 commits
  3. 18 Sep, 2018 12 commits
  4. 17 Sep, 2018 12 commits
    • Vaibhav Nagarnaik's avatar
      ring-buffer: Allow for rescheduling when removing pages · 83f36555
      Vaibhav Nagarnaik authored
      When reducing ring buffer size, pages are removed by scheduling a work
      item on each CPU for the corresponding CPU ring buffer. After the pages
      are removed from ring buffer linked list, the pages are free()d in a
      tight loop. The loop does not give up CPU until all pages are removed.
      In a worst case behavior, when lot of pages are to be freed, it can
      cause system stall.
      
      After the pages are removed from the list, the free() can happen while
      the work is rescheduled. Call cond_resched() in the loop to prevent the
      system hangup.
      
      Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
      
      Cc: stable@vger.kernel.org
      Fixes: 83f40318 ("ring-buffer: Make removal of ring buffer pages atomic")
      Reported-by: default avatarJason Behmer <jbehmer@google.com>
      Signed-off-by: default avatarVaibhav Nagarnaik <vnagarnaik@google.com>
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      83f36555
    • Greg Kroah-Hartman's avatar
      Merge tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 3918c21e
      Greg Kroah-Hartman authored
      Mark writes:
        "spi: Fixes for v4.19
      
        As well as one driver fix there's a couple of fixes here which address
        issues with the use of IDRs for allocation of dynamic bus numbers,
        ensuring that dynamic bus numbers interact well with static bus numbers
        assigned via DT and otherwise."
      
      * tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE
        spi: Fix double IDR allocation with DT aliases
        spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
      3918c21e
    • Takashi Iwai's avatar
      Merge tag 'asoc-v4.19-rc4' of... · 196f4eee
      Takashi Iwai authored
      Merge tag 'asoc-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
      
      ASoC: Fixes for v4.19
      
      This is the usual set of small fixes scatterd around various drivers,
      plus one fix for DAPM and a UAPI build fix.  There's not a huge amount
      that stands out here relative to anything else.
      196f4eee
    • zhong jiang's avatar
      net: ethernet: Fix a unused function warning. · c7348091
      zhong jiang authored
      Fix the following compile warning:
      
      drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function]
       static int lan743x_pm_suspend(struct device *dev)
      drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function]
       static int lan743x_pm_resume(struct device *dev)
      Signed-off-by: default avatarzhong jiang <zhongjiang@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c7348091
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix ATU Miss Violation · ddca24df
      Andrew Lunn authored
      Fix a cut/paste error and a typo which results in ATU miss violations
      not being reported.
      
      Fixes: 0977644c ("net: dsa: mv88e6xxx: Decode ATU problem interrupt")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ddca24df
    • Daniel Borkmann's avatar
      tls: fix currently broken MSG_PEEK behavior · 50c6b58a
      Daniel Borkmann authored
      In kTLS MSG_PEEK behavior is currently failing, strace example:
      
        [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
        [pid  2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
        [pid  2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
        [pid  2430] listen(4, 10)               = 0
        [pid  2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
        [pid  2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
        [pid  2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
        [pid  2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
        [pid  2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
        [pid  2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
        [pid  2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
        [pid  2430] close(4)                    = 0
        [pid  2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
        [pid  2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
        [pid  2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64
      
      As can be seen from strace, there are two TLS records sent,
      i) 'test_read_peek' and ii) '_mult_recs\0' where we end up
      peeking 'test_read_peektest_read_peektest'. This is clearly
      wrong, and what happens is that given peek cannot call into
      tls_sw_advance_skb() to unpause strparser and proceed with
      the next skb, we end up looping over the current one, copying
      the 'test_read_peek' over and over into the user provided
      buffer.
      
      Here, we can only peek into the currently held skb (current,
      full TLS record) as otherwise we would end up having to hold
      all the original skb(s) (depending on the peek depth) in a
      separate queue when unpausing strparser to process next
      records, minimally intrusive is to return only up to the
      current record's size (which likely was what c46234eb
      ("tls: RX path for ktls") originally intended as well). Thus,
      after patch we properly peek the first record:
      
        [pid  2046] wait4(2075,  <unfinished ...>
        [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
        [pid  2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
        [pid  2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
        [pid  2075] listen(4, 10)               = 0
        [pid  2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
        [pid  2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
        [pid  2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
        [pid  2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
        [pid  2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
        [pid  2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
        [pid  2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
        [pid  2075] close(4)                    = 0
        [pid  2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
        [pid  2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
        [pid  2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14
      
      Fixes: c46234eb ("tls: RX path for ktls")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50c6b58a
    • David S. Miller's avatar
      Merge branch 'hv_netvsc-associate-VF-and-PV-device-by-serial-number' · aa079bd0
      David S. Miller authored
      Stephen Hemminger says:
      
      ====================
      hv_netvsc: associate VF and PV device by serial number
      
      The Hyper-V implementation of PCI controller has concept of 32 bit serial number
      (not to be confused with PCI-E serial number).  This value is sent in the protocol
      from the host to indicate SR-IOV VF device is attached to a synthetic NIC.
      
      Using the serial number (instead of MAC address) to associate the two devices
      avoids lots of potential problems when there are duplicate MAC addresses from
      tunnels or layered devices.
      
      The patch set is broken into two parts, one is for the PCI controller
      and the other is for the netvsc device. Normally, these go through different
      trees but sending them together here for better review. The PCI changes
      were submitted previously, but the main review comment was "why do you
      need this?". This is why.
      
      v2 - slot name can be shorter.
           remove locking when creating pci_slots; see comment for explaination
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa079bd0
    • Stephen Hemminger's avatar
      hv_netvsc: pair VF based on serial number · 00d7ddba
      Stephen Hemminger authored
      Matching network device based on MAC address is problematic
      since a non VF network device can be creted with a duplicate MAC
      address causing confusion and problems.  The VMBus API does provide
      a serial number that is a better matching method.
      Signed-off-by: default avatarStephen Hemminger <sthemmin@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      00d7ddba
    • Stephen Hemminger's avatar
      PCI: hv: support reporting serial number as slot information · a15f2c08
      Stephen Hemminger authored
      The Hyper-V host API for PCI provides a unique "serial number" which
      can be used as basis for sysfs PCI slot table. This can be useful
      for cases where userspace wants to find the PCI device based on
      serial number.
      
      When an SR-IOV NIC is added, the host sends an attach message
      with serial number. The kernel doesn't use the serial number, but
      it is useful when doing the same thing in a userspace driver such
      as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
      way to find the matching PCI device.
      
      There maybe some cases where serial number is not unique such
      as when using GPU's. But the PCI slot infrastructure will handle
      that.
      
      This has a side effect which may also be useful. The common udev
      network device naming policy uses the slot information (rather
      than PCI address).
      Signed-off-by: default avatarStephen Hemminger <sthemmin@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a15f2c08
    • Michael Chan's avatar
      bnxt_en: Fix VF mac address regression. · 28ea334b
      Michael Chan authored
      The recent commit to always forward the VF MAC address to the PF for
      approval may not work if the PF driver or the firmware is older.  This
      will cause the VF driver to fail during probe:
      
        bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff
        bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF
        bnxt_en 0000:00:03.0: Unable to initialize mac address.
        bnxt_en: probe of 0000:00:03.0 failed with error -99
      
      We fix it by treating the error as fatal only if the VF MAC address is
      locally generated by the VF.
      
      Fixes: 707e7e96 ("bnxt_en: Always forward VF MAC address to the PF.")
      Reported-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Reported-by: default avatarSiwei Liu <loseweigh@gmail.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      28ea334b
    • Eric Dumazet's avatar
      ipv6: fix possible use-after-free in ip6_xmit() · bbd6528d
      Eric Dumazet authored
      In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
      we need to call skb_set_owner_w() before consuming original skb,
      otherwise we risk a use-after-free.
      
      Bring IPv6 in line with what we do in IPv4 to fix this.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbd6528d
    • Colin Ian King's avatar
      net: hp100: fix always-true check for link up state · a7f38002
      Colin Ian King authored
      The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
      that is always non-zero and hence the wait for the link to drop always
      terminates prematurely.  Fix this by using a logical not operator instead
      of a bitwise complement.  This issue has been in the driver since
      pre-2.6.12-rc2.
      
      Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7f38002