- 06 Sep, 2012 16 commits
-
-
H Hartley Sweeten authored
Rename the variable used for the comedi_subdevice pointer from 'subdevice' to 's'. This is more typical in other comedi drivers and helps when searching with grep. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
H Hartley Sweeten authored
Convert the comedi_subdevice access from pointer math to array access. Signed-off-by:
-
Dan Magenheimer authored
[V2: rebased to apply to 20120905 staging-next, no other changes] This slightly modified ramster codebase is now built entirely on zcache2 and all ramster-specific code is fully contained in a subdirectory. Ramster extends zcache2 to allow pages compressed via zcache2 to be "load-balanced" across machines in a cluster. Control and data communication is done via kernel sockets, and cluster configuration and management is heavily leveraged from the ocfs2 cluster filesystem. There are no new features since the codebase introduced into staging at 3.4. Some cleanup was performed though: 1) Interfaces directly with new zbud 2) Debugfs now used instead of sysfs where possible. Sysfs still used where necessary for userland cluster configuration. Ramster is very much a work-in-progress but also does really work! RAMSTER HIGH LEVEL OVERVIEW (from original V5 posting in Feb 2012) RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of kernels to dynamically pool their RAM so that a RAM-hungry workload on one machine can temporarily and transparently utilize RAM on another machine which is presumably idle or running a non-RAM-hungry workload. Other than the already-merged cleancache patchset and frontswap patchset, no core kernel changes are currently required. (Note that, unlike previous public descriptions of RAMster, this implementation does NOT require synchronous "gets" or core networking changes. As of V5, it also co-exists with ocfs2.) RAMster combines a clustering and messaging foundation based on the ocfs2 cluster layer with the in-kernel compression implementation of zcache2, and adds code to glue them together. When a page is "put" to RAMster, it is compressed and stored locally. Periodically, a thread will "remotify" these pages by sending them via messages to a remote machine. When the page is later needed as indicated by a page fault, a "get" is issued. If the data is local, it is uncompressed and the fault is resolved. If the data is remote, a message is sent to fetch the data and the faulting thread sleeps; when the data arrives, the thread awakens, the data is decompressed and the fault is resolved. As of V5, clusters up to eight nodes are supported; each node can remotify pages to one specified node, so clusters can be configured as clients to a "memory server". Some simple policy is in place that will need to be refined over time. Larger clusters and fault-resistant protocols can also be added over time. A HOW-TO is available at: http://oss.oracle.com/projects/tmem/dist/files/RAMster/HOWTO-120817Acked-by:Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Dan Magenheimer authored
[V2: rebased to apply to 20120905 staging-next, no other changes] The original zcache in staging is a "demo" version, and this is a massive rewrite. This was intended to result in a merged zcache and ramster, but that option has been blocked so, to continue forward progress on ramster and future related projects, only ramster moves to the new codebase. To differentiate between the old demo zcache and the rewrite, we refer to the latter as zcache2, config'd as CONFIG_ZCACHE2. Zcache and zcache2 cannot be built in the same kernel, so CONFIG_ZCACHE2 implies !CONFIG_ZCACHE. This developer still has hope that zcache and zcache2 will be merged into one codebase. Until then, zcache2 can be considered a one-node version of ramster. No history of changes was recorded during the zcache2 rewrite and recreating a sane one would be a Sisyphean task but, since ramster is still in staging and has been unchanged since it was merged, presumably this is acceptable. This commit also provides the hooks in zcache2 for ramster, but all ramster-specific code is provided in a separate commit. Some of the highlights of this rewritten codebase for zcache2: (Note: If you are not familiar with the tmem terminology, you can review it here: http://lwn.net/Articles/454795/ ) 1. Merge of "demo" zcache and the v1.1 version of zcache in ramster. Zcache and ramster had a great deal of duplicate code which is now merged. In essence, zcache2 *is* ramster but with no remote machine available, but !CONFIG_RAMSTER will avoid compiling lots of ramster-specific code. 2. Allocator. Previously, persistent pools used zsmalloc and ephemeral pools used zbud. Now a completely rewritten zbud is used for both. Notably this zbud maintains all persistent (frontswap) and ephemeral (cleancache) pageframes in separate queues in LRU order. 3. Interaction with page allocator. Zbud does no page allocation/freeing, it is done entirely in zcache2 where it can be tracked more effectively. 4. Better pre-allocation. Previously, on put, if a new pageframe could not be pre-allocated, the put would fail, even if the allocator had plenty of partial pages where the data could be stored; this is now fixed. 5. Ouroboros ("eating its own tail") allocation. If no pageframe can be allocated AND no partial pages are available, the least-recently-used ephemeral pageframe is reclaimed immediately (including flushing tmem pointers to it) and re-used. This ensures that most-recently-used cleancache pages are more likely to be retained than LRU pages and also that, as in the core mm subsystem, anonymous pages have a higher priority than clean page cache pages. 6. Zcache and zbud now use debugfs instead of sysfs. Ramster uses debugfs where possible and sysfs where necessary. (Some ramster configuration is done from userspace so some sysfs is necessary.) 7. Modularization. As some have observed, the monolithic zcache-main.c code included zbud code, which has now been separated into its own code module. Much ramster-specific code in the old ramster zcache-main.c has also been moved into ramster.c so that it does not get compiled with !CONFIG_RAMSTER. 8. Rebased to 3.5. This new codebase also provides hooks for several future new features: A. WasActive patch, requires some mm/frontswap changes previously posted. A new version of this patch will be provided separately. See ifdef __PG_WAS_ACTIVE B. Exclusive gets. It seems tmem _can_ support exclusive gets with a minor change to both zcache2 and a small backwards-compatible change to frontswap.c. Explanation and frontswap patch will be provided separately. See ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS C. Ouroboros writeback. Since persistent (frontswap) pages may now also be reclaimed in LRU order, the foundation is in place to properly writeback these pages back into the swap cache and then the swap disk. This is still under development and requires some other mm changes which are prototyped. See ifdef FRONTSWAP_HAS_UNUSE. A new feature that desperately needs attention (if someone is looking for a way to contribute) is kernel module support. A preliminary version of a patch was posted by Erlangen University and needs to be integrated and tested for zcache2 and brought up to kernel standards. If anybody is interested on helping out with any of these, let me know! Acked-by:
-
Dan Magenheimer authored
[V2: rebased to apply to 20120905 staging-next, no other changes] To prep for moving the ramster codebase on top of the new redesigned zcache2 codebase, we remove ramster (as well as its contained diverged v1.1 version of zcache) entirely. Acked-by:
-
- 05 Sep, 2012 10 commits
-
-
Marcus Karlsson authored
Fix spelling in tmem.c: Transcedent -> Transcendent Signed-off-by:
Marcus Karlsson <mk@acc.umu.se> Acked-by:
-
Devendra Naga authored
we are dereferencing the pshmem , and the pci_alloc_consistent can fail returning null, do a memcpy if we have a valid pshmem Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
Devendra Naga authored
this function return void, means return at the end of this function is not needed Signed-off-by:
-
Devendra Naga authored
the locked variable is used for checking whether the function acquired lock, then unlock. actually with out this we can achieve the same lock and unlock senario, remove the locked variable and also cleanup the code around. Signed-off-by:
-
Devendra Naga authored
we are returning -ENOENT when there is no firmware file for a matching device id. then we start calling request_firmware, after this we do checks on the firmware length of corresponding device id, since the default case is handled in the begining itself there is no need of a default case at the firmware length checks Signed-off-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
-
Samuel Iglesias Gonsálvez authored
Caused by commit 187e4782 ("Staging: ipack: Read the ID space during device registration"). drivers/staging/ipack/ipack.c: In function 'ipack_device_read_id': drivers/staging/ipack/ipack.c:291:2: error: implicit declaration of function 'ioread8' [-Werror=implicit-function-declaration] drivers/staging/ipack/ipack.c:309:3: error: implicit declaration of function 'ioread16be' [-Werror=implicit-function-declaration] Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by:
-
Ian Abbott authored
Remove the pointer to the PCI device from the private data `struct das08_private_struct`. Use `comedi_set_hw_dev()` to save a pointer to the PCI device (actually, its embedded `struct device`) and `comedi_to_pci_dev()` to retrieve it. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Now that this driver no longer supports "manual" attachment of PCI devices in its `attach` hook (`das08_attach()`), it no longer has code that searches for a suitable PCI device and increments its reference count. Since the driver no longer has any reason for incrementing and decrementing the PCI device's reference count, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by:
-
- 04 Sep, 2012 14 commits
-
-
H Hartley Sweeten authored
The addi_amcc_S5920.c file only has the function i_AddiHeaderRW_ReadEeprom() in it. The addi_amcc_S5920.h file has a prototype for this function and a couple defines for the magic numbers used when accessing the eeprom. The .c file is not actually built by any .config selection, or by an The .h file is only #include'd by the hwdrv_apci3200.c file. That file actually has a local version of the i_AddiHeaderRW_ReadEeprom() function that is identical to the one in the .c file. Just move the #define's from the .h file into hwdrv_apci3200.c and remove the addi_amcc_S5920.[ch] files. Signed-off-by:
-
H Hartley Sweeten authored
Nothing in the comedi subsystem references this header file. It's actually almost a straight copy of the addi_amcc_s5933.h file anyway. Just remove the file. Signed-off-by:
-
H Hartley Sweeten authored
The Makefile for the comedi subsystem does not compile this file for any .config selection. This file would allow building one big driver to support all the addi-data cards. The addi-data drivers are a big enough mess as-is. Just remove this file. Signed-off-by:
-
Jens Taprogge authored
Signed-off-by:
Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by:
-
Jens Taprogge authored
Also include it in the hotplug event so that udev can provide the respective driver. Signed-off-by:
-
Jens Taprogge authored
Devices are match based upon their vendor and device ids. Since the individual drivers provide a list of supported ids they do not need to implement the matching themselves. Signed-off-by:
-
Jens Taprogge authored
The modalias entries for the module are now created. Signed-off-by:
-
Jens Taprogge authored
Signed-off-by:
-
Jens Taprogge authored
Rename them in the process. Signed-off-by:
-
Jens Taprogge authored
Also expose the values through sysfs. Signed-off-by:
-
Jens Taprogge authored
We keep a copy of the ID space for later use. Signed-off-by:
-
Jens Taprogge authored
The modaliases look like ipack:fXvNdM, where X is the format version (8 bit) and N and M are the vendor and device ID represented as 32 bit hexadecimal numbers each. Using 32 bits allows us to define IPACK_ANY_ID as (~0) without interfering with the valid ids. The resulting modalias string for ipoctal.ko looks like this (once ipoctal provides a device table): alias: ipack:f01v000000F0d00000048* alias: ipack:f01v000000F0d0000002A* alias: ipack:f01v000000F0d00000022* (output from modinfo) Signed-off-by:
-
Jens Taprogge authored
No need to have a struct when it has only one field. Signed-off-by:
-
Jens Taprogge authored
Define memory address space, fix sparse warnings and mark the structs reflecting hardware memory layout "packed" to be on the safe side. Signed-off-by:
-
