Skip to content

L
linux
Switch branch/tag
  1. 08 Oct, 2013 4 commits
    • Pali Rohár's avatar
      ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config · d1f1ca36
      Pali Rohár authored 
      File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs
attribute if value is higher than max_current specified in board file. By default
global C variables are zero, so changing always failed. This patch adding missing
max_current and setting it to max safe value 100 (10 mA).

It is unclear which commit exactly caused this regression as the lp5523
driver was broken and was hiding the platform data breakage. Now
the driver is fixed so this should be fixed as well.
Signed-off-by: default avatarPali Rohár <pali.rohar@gmail.com>
Signed-off-by: default avatarJoerg Reisenweber <joerg@openmoko.org>
[tony@atomide.com: updated comments to describe regression]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d1f1ca36
    • Simon Barth's avatar
      ARM: mach-omap2: board-generic: fix undefined symbol · 0b8214fe
      Simon Barth authored 
      Since dra7 reuses the  function 'omap5_realtime_timer_init' in
arch/arm/mach-omap2/board-generic.c as timer init function, it has to be
built for this SoC as well.
Signed-off-by: default avatarSimon Barth <Simon.Pe.Barth@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      0b8214fe
    • Tony Lindgren's avatar
      ARM: dts: Fix pinctrl mask for omap3 · d623a0e1
      Tony Lindgren authored 
      The wake-up interrupt bit is available on omap3/4/5 processors
unlike what we claim. Without fixing it we cannot use it on
omap3 and the system configured for wake-up events will just
hang on wake-up.

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d623a0e1
    • Nishanth Menon's avatar
      ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree · 016c12d2
      Nishanth Menon authored 
      SoC family definitions at the moment are reactive to board needs
as a result, beagle-xm would matchup with ti,omap3 which invokes
omap3430_init_early instead of omap3630_init_early. Obviously, this is
the wrong behavior.

With clock node dts conversion, we get the following warnings before
system hangs as a result and 3630 based platforms fails to boot
(uart4 clocks are only present in OMAP3630 and not present in
OMAP3430):

...
omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
omap_hwmod: uart4: cannot _init_clocks

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434
_init+0x6c/0x80()
omap_hwmod: uart4: couldn't init clocks
...

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: timer12: enabled state can only be entered from
initialized, idle, or disabled state
...

WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224
_idle+0xd4/0xf8()
omap_hwmod: timer12: idle state can only be entered from enabled state

WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126
_enable+0x254/0x280()
omap_hwmod: uart4: enabled state can only be entered from
initialized, idle, or disabled state

So, add specific compatiblity for 3630 to allow match for Beagle-XM
platform.
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
[tony@atomide.com: left out ti,omap343x, updated comments]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      016c12d2
  3. 03 Oct, 2013 1 commit
    • Aaro Koskinen's avatar
      ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT · 1dc1c338
      Aaro Koskinen authored 
      With DT-based boot, the GPMC OneNAND sync mode setup does not work
correctly. During the async mode setup, sync flags gets incorrectly
set in the onenand_async data and the system crashes during the async
setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so
even without the crash, the actual sync mode setup would never be called.

The patch fixes this by adjusting the gpmc_onenand_data->flags when the
data is read from the DT. Also while doing this we force the onenand_async
to be always async.

The patch enables to use the following DTS chunk (that should correspond
the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950,
which currently crashes with 3.12-rc1. The crash output can be also
found below.

&gpmc {
	ranges = <0 0 0x04000000 0x20000000>;

	onenand@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0 0 0x20000000>;

		gpmc,sync-read;
		gpmc,sync-write;
		gpmc,burst-length = <16>;
		gpmc,burst-read;
		gpmc,burst-wrap;
		gpmc,burst-write;
		gpmc,device-width = <2>;
		gpmc,mux-add-data = <2>;
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <87>;
		gpmc,cs-wr-off-ns = <87>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <10>;
		gpmc,adv-wr-off-ns = <10>;
		gpmc,oe-on-ns = <15>;
		gpmc,oe-off-ns = <87>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <87>;
		gpmc,rd-cycle-ns = <112>;
		gpmc,wr-cycle-ns = <112>;
		gpmc,access-ns = <81>;
		gpmc,page-burst-access-ns = <15>;
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <5>;
		gpmc,wr-data-mux-bus-ns = <30>;
		gpmc,wr-access-ns = <81>;
		gpmc,sync-clk-ps = <15000>;
	};
};

[    1.467559] GPMC CS0: cs_on     :   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.474822] GPMC CS0: cs_rd_off :   1 ticks,   5 ns (was  24 ticks)   5 ns
[    1.482116] GPMC CS0: cs_wr_off :  14 ticks,  71 ns (was  24 ticks)  71 ns
[    1.489349] GPMC CS0: adv_on    :   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.496582] GPMC CS0: adv_rd_off:   3 ticks,  15 ns (was   3 ticks)  15 ns
[    1.503845] GPMC CS0: adv_wr_off:   3 ticks,  15 ns (was   3 ticks)  15 ns
[    1.511077] GPMC CS0: oe_on     :   3 ticks,  15 ns (was   4 ticks)  15 ns
[    1.518310] GPMC CS0: oe_off    :   1 ticks,   5 ns (was  24 ticks)   5 ns
[    1.525543] GPMC CS0: we_on     :   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.532806] GPMC CS0: we_off    :   8 ticks,  40 ns (was  24 ticks)  40 ns
[    1.540039] GPMC CS0: rd_cycle  :   4 ticks,  20 ns (was  29 ticks)  20 ns
[    1.547302] GPMC CS0: wr_cycle  :   4 ticks,  20 ns (was  29 ticks)  20 ns
[    1.554504] GPMC CS0: access    :   0 ticks,   0 ns (was  23 ticks)   0 ns
[    1.561767] GPMC CS0: page_burst_access:   0 ticks,   0 ns (was   3 ticks)   0 ns
[    1.569641] GPMC CS0: bus_turnaround:   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.577270] GPMC CS0: cycle2cycle_delay:   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.585144] GPMC CS0: wait_monitoring:   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.592834] GPMC CS0: clk_activation:   0 ticks,   0 ns (was   0 ticks)   0 ns
[    1.600463] GPMC CS0: wr_data_mux_bus:   5 ticks,  25 ns (was   8 ticks)  25 ns
[    1.608154] GPMC CS0: wr_access :   0 ticks,   0 ns (was  23 ticks)   0 ns
[    1.615386] GPMC CS0 CLK period is 5 ns (div 1)
[    1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442
[    1.633178] Internal error: : 1008 [#1] ARM
[    1.637573] Modules linked in:
[    1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26
[    1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000
[    1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0
[    1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4
[    1.667083] pc : [<c002e040>]    lr : [<c001f384>]    psr: 60000113
[    1.667083] sp : ef051d10  ip : ef051ce0  fp : ef051d94
[    1.679138] r10: c0caaf60  r9 : ef050000  r8 : ef18b32c
[    1.684631] r7 : f0080000  r6 : c0caaf60  r5 : 00000000  r4 : f009e400
[    1.691497] r3 : f009e442  r2 : 80050000  r1 : 00000014  r0 : 00000000
[    1.698333] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    1.706024] Control: 10c5387d  Table: af290019  DAC: 00000015
[    1.712066] Process swapper (pid: 1, stack limit = 0xef050240)
[    1.718200] Stack: (0xef051d10 to 0xef052000)
[    1.722778] 1d00:                                     00004000 00001402 00000000 00000005
[    1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005
[    1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000
[    1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000
[    1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868
[    1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074
[    1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4
[    1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104
[    1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328
[    1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48
[    1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040
[    1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88
[    1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc
[    1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080
[    1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8
[    1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08
[    1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08
[    1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868
[    1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff
[    1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000
[    1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000
[    1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000
[    1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
[    1.929199] Backtrace:
[    1.931793] [<c002dfa8>] (gpmc_onenand_setup+0x0/0x1e0) from [<c024447c>] (omap2_onenand_probe+0x118/0x49c)
[    1.942047] [<c0244364>] (omap2_onenand_probe+0x0/0x49c) from [<c01fd508>] (platform_drv_probe+0x20/0x24)
[    1.952117]  r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c
[    1.959197] [<c01fd4e8>] (platform_drv_probe+0x0/0x24) from [<c01fc204>] (driver_probe_device+0x10c/0x224)
[    1.969360] [<c01fc0f8>] (driver_probe_device+0x0/0x224) from [<c01fc3b0>] (__driver_attach+0x94/0x98)
[    1.979125]  r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40
[    1.985107] [<c01fc31c>] (__driver_attach+0x0/0x98) from [<c01fa794>] (bus_for_each_dev+0x5c/0x90)
[    1.994506]  r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc
[    2.000488] [<c01fa738>] (bus_for_each_dev+0x0/0x90) from [<c01fbcfc>] (driver_attach+0x24/0x28)
[    2.009735]  r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500
[    2.014587] [<c01fbcd8>] (driver_attach+0x0/0x28) from [<c01fb838>] (bus_add_driver+0xdc/0x260)
[    2.023742] [<c01fb75c>] (bus_add_driver+0x0/0x260) from [<c01fca30>] (driver_register+0x80/0xfc)
[    2.033081]  r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500
[    2.040161] [<c01fc9b0>] (driver_register+0x0/0xfc) from [<c01fd728>] (__platform_driver_register+0x50/0x64)
[    2.050476]  r5:00000006 r4:c04975b8
[    2.054260] [<c01fd6d8>] (__platform_driver_register+0x0/0x64) from [<c048808c>] (omap2_onenand_driver_init+0x18/0x20)
[    2.065490] [<c0488074>] (omap2_onenand_driver_init+0x0/0x20) from [<c0008888>] (do_one_initcall+0xf4/0x150)
[    2.075836] [<c0008794>] (do_one_initcall+0x0/0x150) from [<c046db8c>] (kernel_init_freeable+0xf0/0x1b4)
[    2.085815] [<c046da9c>] (kernel_init_freeable+0x0/0x1b4) from [<c0348fe0>] (kernel_init+0x10/0xec)
[    2.095336] [<c0348fd0>] (kernel_init+0x0/0xec) from [<c000e7f8>] (ret_from_fork+0x14/0x3c)
[    2.104125]  r4:00000000 r3:00000000
[    2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0)
[    2.114318] ---[ end trace b8ee3e3e5e002451 ]---
Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      1dc1c338
  5. 29 Sep, 2013 10 commits
    • Linus Torvalds's avatar
      Linux 3.12-rc3 · 15c03dd4
      Linus Torvalds authored
      15c03dd4
    • Linus Torvalds's avatar
      Merge tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 30ceb4ec
      Linus Torvalds authored 
      Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for 3.12-rc3.

  These are all for host controller issues that have been reported, and
  there's a fix for an annoying error message that gets printed every
  time you remove a USB 3 device from the system that's been bugging me
  for a while"

* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: add support for Merrifield
  USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
  USB: Fix breakage in ffs_fs_mount()
  fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
  usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
  usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
  usb: chipidea: udc: free pending TD at removal procedure
  usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
  usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
  usb: chipidea: udc: fix the oops after rmmod gadget
  USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
  USB: OHCI: accept very late isochronous URBs
  USB: UHCI: accept very late isochronous URBs
  USB: iMX21: accept very late isochronous URBs
  usbcore: check usb device's state before sending a Set SEL control transfer
  xhci: Fix race between ep halt and URB cancellation
  usb: Fix xHCI host issues on remote wakeup.
  xhci: Ensure a command structure points to the correct trb on the command ring
  xhci: Fix oops happening after address device timeout
      30ceb4ec
    • Linus Torvalds's avatar
      Merge tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 26c019fc
      Linus Torvalds authored 
      Pull tty/serial fixes from Greg KH:
 "Here are some serial at tty driver fixes for 3.12-rc3

  The serial driver fixes some kref leaks, documentation is moved to the
  proper places, and the tty and n_tty fixes resolve some reported
  regressions.  There is still one outstanding tty regression fix that
  isn't in here yet, as I want to test it out some more, it will be sent
  for 3.12-rc4 if it checks out"

* tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: ar933x_uart: move devicetree binding documentation
  tty: Fix SIGTTOU not sent with tcflush()
  n_tty: Fix EOF push index when termios changes
  serial: pch_uart: remove unnecessary tty_port_tty_get
  serial: pch_uart: fix tty-kref leak in dma-rx path
  serial: pch_uart: fix tty-kref leak in rx-error path
  serial: tegra: fix tty-kref leak
      26c019fc
    • Linus Torvalds's avatar
      Merge tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 31795c40
      Linus Torvalds authored 
      Pull staging fixes from Greg KH:
 "Here are some staging driver fixes, MAINTAINER updates, and a new
  device id.  All of these have been in the linux-next tree, and are
  pretty simple patches"

* tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Add new device ID
  staging: imx-drm: Fix probe failure
  staging: vt6656: [BUG] iwctl_siwencodeext return if device not open
  staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
  staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.
  Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb
  staging: usbip: Orphan usbip
  staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
  staging: r8188eu: Cocci spatch "noderef"
  staging: octeon-usb: Cocci spatch "noderef"
  staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
  MAINTAINERS: staging: dgnc and dgap drivers: add maintainer
  staging: lustre: Cocci spatch "noderef"
      31795c40
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.12-rc3' of... · 434ac47d
      Linus Torvalds authored 
      Merge tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core / sysfs fixes from Greg KH:
 "Here are 2 fixes for 3.12-rc3.  One fixes a sysfs problem with
  mounting caused by 3.12-rc1, and the other is a bug reported by the
  chromeos developers with the driver core.

  Both have been in linux-next for a bit"

* tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core : Fix use after free of dev->parent in device_shutdown
  sysfs: Allow mounting without CONFIG_NET
      434ac47d
    • Linus Torvalds's avatar
      Merge tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · c23c2234
      Linus Torvalds authored 
      Pull char/misc driver fixes from Greg KH:
 "Here are some HyperV and MEI driver fixes for 3.12-rc3.  They resolve
  some issues that people have been reporting for them"

* tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
  Drivers: hv: util: Correctly support ws2008R2 and earlier
  mei: cancel stall timers in mei_reset
  mei: bus: stop wait for read during cl state transition
  mei: make me client counters less error prone
      c23c2234
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · cac66535
      Linus Torvalds authored 
      Pull perf revert from Ingo Molnar:
 "This fixes the 'perf top' regression Markus Trippelsdorf reported"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf symbols: Demangle cloned functions"
      cac66535
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · b97b869a
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "Nothing too major, radeon still has some dpm changes for off by
  default.

  Radeon, intel, msm:
   - radeon: a few more dpm fixes (still off by default), uvd fixes
   - i915: runtime warn backtrace and regression fix
   - msm: iommu changes fallout"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits)
  drm/msm: use drm_gem_dumb_destroy helper
  drm/msm: deal with mach/iommu.h removal
  drm/msm: Remove iommu include from mdp4_kms.c
  drm/msm: Odd PTR_ERR usage
  drm/i915: Fix up usage of SHRINK_STOP
  drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
  drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
  drm/i915/tv: clear adjusted_mode.flags
  drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
  drm/radeon/cik: fix overflow in vram fetch
  drm/radeon: add missing hdmi callbacks for rv6xx
  drm/i915: Use a temporary va_list for two-pass string handling
  drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
  drm/radeon: disable tests/benchmarks if accel is disabled
  drm/radeon: don't set default clocks for SI when DPM is disabled
  drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm: fetch the max clk from voltage dep tables helper
  ...
      b97b869a
    • Ingo Molnar's avatar
      Revert "perf symbols: Demangle cloned functions" · 14951f22
      Ingo Molnar authored 
      This reverts commit de95ab53.

Markus Trippelsdorf reported that this commit broke 'perf top':

 > I just see a gray screen with no text at all. Sometimes the
 > following error messages are printed:
 >
 >  *** Error in `perf': invalid fastbin entry (free): 0x00000000029b18c0
 >  ***
 >  *** Error in `perf': malloc(): memory corruption (fast): 0x0000000000ee0b10 ***

While this code is fixable, the commit itself fails on several levels:

 - it should have been a separate helper function
 - why the heck does it do strchr() twice
 - it casts a const char * over into char *
 - sloppy style
 - it's not even a regression fix!

So lets revert it and re-try the patch in v3.13.
Reported-by: default avatarMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      14951f22
    • Dave Airlie's avatar
      Merge branch 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux into drm-fixes · 66544179
      Dave Airlie authored 
      A small fix + deal with fallout of iommu changes + use new
drm_gem_dumb_destroy helper.

* 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: use drm_gem_dumb_destroy helper
  drm/msm: deal with mach/iommu.h removal
  drm/msm: Remove iommu include from mdp4_kms.c
  drm/msm: Odd PTR_ERR usage
      66544179
  7. 28 Sep, 2013 21 commits
  9. 27 Sep, 2013 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7