staging/usbip: userspace to use linux header for usb_device_speed enum, missing speeds to speed_strings array

Remove usb_device_speed enum define from usbip_common.h and change it to
include linux/usb/ch9.h instead. Add speed strings for usb wireless and 3.0
to speed_strings array.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change usbip_dump_usb_device() to use usb_speed_string() and remove the
code that does switch on udev->speed and builds custom speed strings.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.

This patch also modifies the way userspace sees and uses a
shared device:

* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change vhci_hcd store_attach() routine to include speed string in its device
information message. The current call to dev_info() prints out speed number
which is the enum number. Change to call usb_speed_string() to print speed
string in addition to the number.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When vhci_hcd is enabled, the following message floods the dmesg buffer.
This message doesn't provide any useful information other than cluttering
the dmesg buffer. Fix it by removing the message. There is another debug
message in this routine that dumps detailed port status change information.

[ 4062.716662] vhci_hcd: changed 0
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core expects the driver attach functions to return a
negative errno for failure. Any other value indicates success.

For consistency in the drivers, make sure they all return '0' to
indicate success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdev_8255_init() call returns 0 for success of a negative errno for failure.
For aesthetics, change the error test in this driver from (rc < 0) to simply (rc)
to follow the style of the other users of this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdev_8255_init() call can only fail due to the allocation of the private
data. This failure will alreay have produced an error message. Remove the
redundant dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The initialization of the 8255 subdevice can fail due to the allocation
of the private data. Make sure all callers of subdev_8255_init() propogate
the errno.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This wrapper is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This wrapper is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is a wrapper for _rtw_memcmp(), which is a wrapper for memcmp.
In a later change, _rtw_memcmp will be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This wrapper for vzalloc() is not used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is the equivalent of rtw_write32.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is the equivalent of rtw_write16.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is the equivalent of rtl_write6.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is essentially a duplicate of rtw_read32.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This routine is never used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is essentially a synonym for rtw_read8.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMETRO_TRACE isn't called from anywhere. So delete it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

adapter->lock is only used in et131x_multicast(), which is eventually
called by network stack function __dev_set_rx_mode(). __dev_set_rx_mode()
is always called by (net_device *)dev->addr_list_lock hold, to protect from
concurrent access. So adapter->lock is redundant.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stop read and return error when hit max delay time.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch warnings:

ERROR: return is not a function, parentheses are not required
#462: FILE: drivers/staging/imx-drm/imx-hdmi.c:462:
+       return (hdmi->hdmi_data.enc_in_format !=

ERROR: return is not a function, parentheses are not required
#468: FILE: drivers/staging/imx-drm/imx-hdmi.c:468:
+       return ((hdmi->hdmi_data.enc_out_format == YCBCR422_8BITS) &&

ERROR: return is not a function, parentheses are not required
#475: FILE: drivers/staging/imx-drm/imx-hdmi.c:475:
+       return ((hdmi->hdmi_data.enc_in_format == YCBCR422_8BITS) &&

While at it, broke the return code from is_color_space_decimation() and
is_color_space_interpolation() for better readability
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I was doing some code audits looking at scattergather uses, and noticed
that update() in drivers/staging/rtl8192u/ieee80211/digest.c uses
sg.page which doesn't exist any longer, so this can't possibly compile.

Turns out that digest.c is actually unused.  It doesn't get referenced
in a Makefile or get compiled and doesn't get used as far as I can see.
I then widened the search to all the files in the directory.  There are
a *bunch* that look unused.  I removed all of them, then added them
back one at a time until the driver compiled again.
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Cc: jerry-chuang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This coding style error was detected using the checkpatch.pl script
Signed-off-by: Gary Servin <garyservin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PTR_RET is deprecated. Use PTR_ERR_OR_ZERO instead.
While at it also use PTR_ERR_OR_ZERO in ion.c to simplify
the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed all the trailing whitespace errors found by checkpatch.pl script
Signed-off-by: Gokulnath A <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros need parentheses, otherwise it causes a macro expansion bug
when they are used like this:

	ch->flags &= ~IEEE80211_CHAN_NO_IBSS;

This was found using Smatch:
drivers/staging/rtl8821ae/regd.c:200 _rtl_reg_apply_beaconing_flags()
	warn: the 'IEEE80211_CHAN_NO_IBSS' macro might need parens
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I fixed up some operator spacing issues, and other
minor spacing issues.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Mark functions as static in bpctl_mod.c because they are not used
outside this file. Remove unused function from bpctl_mod.c.

This also eliminates the following warnings from bpctl_mod.c:
drivers/staging/silicom/bpctl_mod.c:1507:6: warning: no previous prototype for ‘send_bypass_clear_pulse’ [-Wmissing-prototypes]
drivers/staging/silicom/bpctl_mod.c:1762:5: warning: no previous prototype for ‘cmnd_on’ [-Wmissing-prototypes]
drivers/staging/silicom/bpctl_mod.c:1779:5: warning: no previous prototype for ‘cmnd_off’ [-Wmissing-prototypes]

...
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1) Make it static.
2) Change it to u8 data instead of short.
3) This means we can memcpy() it to the correct location instead of
   using a for loop.
4) With memcpy() we can use the union member we want directly instead of
   copying to the generic .bytes union member.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add hci_h4p bluetooth driver to staging tree. This device is used
for example on Nokia N900 cell phone.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Thanks-to: Sebastian Reichel <sre@debian.org>
Thanks-to: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Dave Jones pointed out that commit
302433da (staging: vt6656: device.h
Remove typedef enum __device_init_type.), improperly indented a line to
make it look like it was under the if line above it, but it wasn't.

So fix this up.
Reported-by: Dave Jones <davej@redhat.com>
Cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver downloads Xilinx FPGA firmware using gpio pins.
It loads Xilinx FPGA bitstream format firmware image and
program the Xilinx FPGA using SelectMAP (parallel) mode.
Signed-off-by: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I fixed up some operator spacing issues.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>