Add a module option to allow the GPR mixer controls to have the full
resolution of the hardware, i.e., 0...2^31-1 instead of 0...100.

Because of bugs in userspace tools like alsactl and alsamixer, this is
not yet enabled by default.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the cleanup of the hw_ptr update functions in 2.6.33, the calculation
of the delta value was changed to use the modulo operator to protect
against a negative difference due to the pointer wrapping around at the
boundary.

However, the ptr variables are unsigned, so a negative difference would
result in the two complement's value which has no relation to the actual
difference relative to the boundary; the result is typically some value
near LONG_MAX-boundary.  Furthermore, even if the modulo operation would
be done with signed types, the result of a negative dividend could be
negative.

The invalid delta value is then caught by the following checks, but this
means that the pointer update is ignored.

To fix this, use a range check as in the other pointer calculations.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Check that the interrupt raised for a stream is actually a buffer
completion interrupt before handling it as one.  Otherwise, memory
errors or FIFO xruns would be interpreted as a pointer update and could
break the stream timing.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/576160

Symptom: Currently (2.6.32.12) the Dell M1730 uses the 3stack model
quirk. Unfortunately this means that capture is not functional out-
of-the-box despite ensuring that capture settings are unmuted and
raised fully.

Test case: boot from Ubuntu 10.04 LTS live cd; capture does not
work.

Resolution: Correct the model quirk for Dell M1730 to rely on the
BIOS configuration.

This patch also trivially sorts the quirk into the correct section
based on the comments.

Reported-and-Tested-By: <picdragon99@msn.com>
Tested-By: Daren Hayward
Tested-By: Tobias Krais
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

First issue:
With the original patch, I've noticed by unmuting the mic
(and even having it muted), there is a distorted("Noise")
coming from the internal speakers, even when the headphones are plugged in.
What my finding's revealed is:

	/* Mic (rear) pin: input vref at 80% */
	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},

From the original patch. Looking at codec#0 0x18/0x1a is listed as:

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x90100141: [Fixed] Speaker at Int N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x4, Sequence = 0x1
    Misc = NO_PRESENCE
  Pin-ctls: 0x41: OUT VREF_50
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26

seems this Node is listed as: [Fixed] Speaker while 0x15

Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x018b3020: [Jack] Line In at Ext Rear
    Conn = Comb, Color = Blue
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x01: VREF_50
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26

is [Jack] Line In at Ext Rear.
(looking at the other apple products as examples
I came up with the fix below).

Second issue:
alc885_mbp_4ch_modes
The original patch does a good job with the
HP pin automute function, but from what I noticed is I would have to manually
change the channel form 2 to 4 after plugging the headphones in.
And not to mention having odd moments to where I was jamming out
with the headphones on, then later realized I had sound blasting out
of the speakers as well. My findings revealed that changing
alc885_mbp_4ch_modes to alc885_mba21_ch_modes and setting
-	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x18;
gets the automute function when the headphones plugged in working
flawlessly(and the no need to manually change the channel number
afterwards).

Third issue:
alc885_imac91_mixer
There probably doesnt need to be anything changed with this
(esspecially if your one to like lots of sliders),but my findings
revealed that mac osx only has a master on the top right,
another switch on itunes, and then a slider for the mic.

So the changes I did below try and mimic osx as much as possible
(only thing I had an issue with is just having one mute switch
on the master, instead of having two(still investigating)).

fourth issue:
alc882_capture_source
I endeded up creating alc889A_imac91_capture_source()
only  because looking at alc882_capture_source I see
that the mic is set to 0x1 while this works, I also noticed
that adding 0x1 and 0x01 and testing that 0x1 somehow
stops working, and 0x01 works(so I figured 0x01 was more
of the alpha of the numbers(still need to figure out
where that valuse is)). In any case the microphone
does work with the original, and with the below patch, but both
still record not as clean(lots of "Noise", which I would like to
look into too).
Note: using alsamixer -Va reveals the capture switches.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/549560

Symptom: on a significant number of hardware, booting from a live cd
results in capture working correctly, but once the distribution is
installed, booting from the install results in capture not working.

Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly.
Install to HD and reboot; capture does not work. Reproduced with 2.6.32
mainline build (vanilla kernel.org compile)

Resolution: add SSID for Toshiba A100-259 to the position_fix quirk
table, explicitly specifying the LPIB method.

I'll be sending additional patches for these SSIDs as bug reports are
confirmed.

This patch also trivially sorts the quirk table in ascending order by
subsystem vendor.

Reported-and-Tested-by: <davide.molteni@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/583983

Symptom: on a significant number of hardware, booting from a live cd
results in capture working correctly, but once the distribution is
installed, booting from the install results in capture not working.

Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly.
Install to HD and reboot; capture does not work. Reproduced with 2.6.32
mainline build (vanilla kernel.org compile).

Resolution: add SSID for Acer Aspire 5110 to the position_fix quirk
table, explicitly specifying the LPIB method.

I'll be sending additional patches for these SSIDs as bug reports are
confirmed.

Reported-and-Tested-By: Leo
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the VENDOR/DEVICE ids provided in pci_ids.h instead of creating
local ids of the same values.

Also, fix the following checkpatch.pl warnings:

WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The decoding/encoding is based on own reverse-engineering. Both control and
data ports are handled. Writing to control port supports SysEx events only,
as this is the only type of messages that MPD16 recognizes.
Signed-off-by: Krzysztof Foltman <wdev@foltman.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 7910b4a1 in 2.6.34 changed the
runtime->boundary calculation to make this value a multiple of both the
buffer_size and the period_size, because the latter is assumed by the
runtime->hw_ptr_interrupt calculation.

However, due to the lack of a ioctl that could read the software
parameters before they are set, the kernel requires that alsa-lib
calculates the boundary value, too.  The changed algorithm leads to
a different boundary value used by alsa-lib, which makes, e.g., mplayer
fail to play a 44.1 kHz file because the silence_size parameter is now
invalid; bug report:
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5015>.

This patch reverts the change to the boundary calculation, and instead
fixes the hw_ptr_interrupt calculation to be period-aligned regardless
of the boundary value.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)
  ALSA: hda: Storage class should be before const qualifier
  ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies
  ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT
  ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
  ASoC: TWL6040: Enable earphone path in codec
  ASoC: SDP4430: Add support for Earphone speaker
  ASoC: SDP4430: Add sdp4430 machine driver
  ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF
  ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function
  ALSA: sound/pci/asihpi: Use kzalloc
  ALSA: hdmi - dont fail on extra nodes
  ALSA: intelhdmi - add id for the CougarPoint chipset
  ALSA: intelhdmi - user friendly codec name
  ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS
  ALSA: asihpi: incorrect range check
  ALSA: asihpi: testing the wrong variable
  ALSA: es1688: add pedantic range checks
  ARM: McBSP: Add support for omap4 in McBSP driver
  ARM: McBSP: Fix request for irq in OMAP4
  OMAP: McBSP: Add 32-bit mode support
  ...

* 'for-linus/i2c-2635' of git://git.fluff.org/bjdooks/linux: (21 commits)
  i2c-highlander: remover superflous variable
  i2c-ibm-iic: drop NO_IRQ
  i2c-cpm: drop NO_IRQ
  i2c-mpc: drop NO_IRQ
  MAINTAINERS: add i2c tree for embedded platforms
  i2c-pxa: only define 'blue_murder'-function if DEBUG is #defined
  i2c-pxa: remove unused macro
  i2c-nomadik: fix operator precedence warning
  i2c-nomadik: release region when removed
  OMAP3: I2C: Clean up Errata 1p153 handling
  OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  omap: i2c: add a timeout to the busy waiting
  omap: i2c: make errata 1.153 workaround a separate function
  i2c-omap: add mpu wake up latency constraint in i2c
  omap: i2c: Add i2c support on omap4 platform
  i2c-bfin-twi: return completion in interrupt for smbus quick transfers
  i2c-bfin-twi: remove redundant retry
  i2c-bfin-twi: fix lost interrupts at high speeds
  i2c-bfin-twi: add debug output for error status
  i2c-bfin-twi: integrate timeout timer with completion interface
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits)
  V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
  V4L/DVB: vivi and mem2mem_testdev need slab.h to build
  V4L/DVB: tm6000: bugfix image position
  V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET
  V4L/DVB: tm6000: README - add vbi
  V4L/DVB: Fix unlock logic at medusa_video_init
  V4L/DVB: fix dvb frontend lockup
  V4L/DVB: s2255drv: remove dead code
  V4L/DVB: s2255drv: return if vdev not found
  V4L/DVB: ov511: cleanup: remove unneeded null check
  V4L/DVB: media/mem2mem: dereferencing free memory
  V4L/DVB: media/IR: Add missing include file to rc-map.c
  V4L/DVB: dvb/stv6110x: cleanup error handling
  V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig
  V4L/DVB: ngene: start separating out DVB functions into separate file
  V4L/DVB: ngene: split out card specific code into a separate file
  V4L/DVB: ngene: split out i2c code into a separate file
  V4L/DVB: ngene: add initial support for digital side of Avermedia m780
  V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input
  V4L-DVB: ngene: make sure that tuner headers are included
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (49 commits)
  libata-sff: separate out BMDMA qc_issue
  libata-sff: prd is BMDMA specific
  libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
  libata-sff: separate out BMDMA EH
  libata-sff: port_task is SFF specific
  libata-sff: ap->[last_]ctl are SFF specific
  libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo()
  libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
  libata-sff: clean up BMDMA initialization
  libata-sff: clean up inheritance in several drivers
  libata-sff: reorder SFF/BMDMA functions
  sata_inic162x: kill PORT_PRD_ADDR initialization
  libata: kill ATA_FLAG_DISABLED
  libata-sff: kill unused prototype and make ata_dev_select() static
  libata-sff: update bmdma host bus error handling
  sata_mv: remove unnecessary initialization
  sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
  pata_sch: use ata_pci_sff_init_one()
  pata_sil680: Do our own exec_command posting
  libata: Remove excess delay in the tf_load path
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
  pcmcia: disable PCMCIA ioctl also for ARM
  drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
  drivers/staging/comedi: dev_node removal (ni_mio_cs)
  drivers/staging/comedi: dev_node removal (ni_labpc_cs)
  drivers/staging/comedi: dev_node removal (ni_daq_dio24)
  drivers/staging/comedi: dev_node removal (ni_daq_700)
  drivers/staging/comedi: dev_node removal (das08_cs)
  drivers/staging/comedi: dev_node removal (cb_das16_cs)
  pata_pcmcia: get rid of extra indirection
  pcmcia: remove suspend-related comment from yenta_socket.c
  pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
  pcmcia: remove pcmcia_add_device_lock
  pcmcia: update gfp/slab.h includes
  pcmcia: remove unused mem_op.h
  pcmcia: do not autoadd root PCI bus resources
  pcmcia: clarify alloc_io_space, move it to resource handlers
  pcmcia: move all pcmcia_resource_ops providers into one module
  pcmcia: move high level CIS access code to separate file
  pcmcia: dev_node removal (core)
  pcmcia: dev_node removal (remaining drivers)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: PM QOS update fix
  Freezer / cgroup freezer: Update stale locking comments
  PM / platform_bus: Allow runtime PM by default
  i2c: Fix bus-level power management callbacks
  PM QOS update
  PM / Hibernate: Fix block_io.c printk warning
  PM / Hibernate: Group swap ops
  PM / Hibernate: Move the first_sector out of swsusp_write
  PM / Hibernate: Separate block_io
  PM / Hibernate: Snapshot cleanup
  FS / libfs: Implement simple_write_to_buffer
  PM / Hibernate: document open(/dev/snapshot) side effects
  PM / Runtime: Add sysfs debug files
  PM: Improve device power management document
  PM: Update device power management document
  PM: Allow runtime_suspend methods to call pm_schedule_suspend()
  PM: pm_wakeup - switch to using bool

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: change cancel_work_sync() to clear work->data
  workqueue: warn about flush_scheduled_work()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  ia64: add sparse annotation to __ia64_per_cpu_var()
  percpu: implement kernel memory based chunk allocation
  percpu: move vmalloc based chunk management into percpu-vm.c
  percpu: misc preparations for nommu support
  percpu: reorganize chunk creation and destruction
  percpu: factor out pcpu_addr_in_first/reserved_chunk() and update per_cpu_ptr_to_phys()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Use kmemdup() instead of kmalloc()+memcpy()
  IB/iser: Fix error flow in iser_create_ib_conn_res()
  IB/iser: Enhance disconnection logic for multi-pathing
  IB/iser: Remove buggy back-pointer setting
  IB/iser: Add asynchronous event handler
  MAINTAINERS: Add cxgb4 and iw_cxgb4 entries
  RDMA/cxgb3: Shrink .text with compile-time init of handlers arrays
  IPoIB: Allow disabling/enabling TSO on the fly through ethtool
  IB/mlx4: Add support for masked atomic operations
  IB/core: Add support for masked atomic operations
  RDMA/cma: Randomize local port allocation
  RDMA/nes: Make unnecessarily global functions static
  RDMA/nes: Make nesadapter->phy_lock usage consistent
  RDMA/cxgb4: Add driver for Chelsio T4 RNIC
  IB/mthca: Use the dma state API instead of pci equivalents
  RDMA/amso1100: Use the dma state API instead of pci equivalents
  RDMA/cxgb3: Don't free skbs on NET_XMIT_* indications from LLD
  RDMA/cxgb3: Use the dma state API instead of pci equivalents
  IB: Explicitly rule out llseek to avoid BKL in default_llseek()

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)
  KEYS: Return more accurate error codes
  LSM: Add __init to fixup function.
  TOMOYO: Add pathname grouping support.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  security/selinux/ss: Use kstrdup
  TOMOYO: Use stack memory for pending entry.
  Revert "ima: remove ACPI dependency"
  Revert "TPM: ACPI/PNP dependency removal"
  KEYS: Do preallocation for __key_link()
  TOMOYO: Use mutex_lock_interruptible.
  KEYS: Better handling of errors from construct_alloc_key()
  KEYS: keyring_serialise_link_sem is only needed for keyring->keyring links
  TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.
  ima: remove ACPI dependency
  TPM: ACPI/PNP dependency removal
  selinux: generalize disabling of execmem for plt-in-heap archs
  LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE
  CRED: Holding a spinlock does not imply the holding of RCU read lock
  SMACK: Don't #include Ext2 headers
  ...

Conflicts:
	sound/soc/codecs/ad1938.c

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

These pins are for decoupling capacitors for the internal charge pumps
in TPA6130A2 and TPA6140A2 and not for connecting external supply.

Thanks to Eduardo Valentin <eduardo.valentin@nokia.com> for pointing out the
issue with TPA6130A2 and Ilkka Koskinen <ilkka.koskinen@nokia.com> with
TPA6140A2.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux: (45 commits)
  Revert "nfsd4: distinguish expired from stale stateids"
  nfsd: safer initialization order in find_file()
  nfs4: minor callback code simplification, comment
  NFSD: don't report compiled-out versions as present
  nfsd4: implement reclaim_complete
  nfsd4: nfsd4_destroy_session must set callback client under the state lock
  nfsd4: keep a reference count on client while in use
  nfsd4: mark_client_expired
  nfsd4: introduce nfs4_client.cl_refcount
  nfsd4: refactor expire_client
  nfsd4: extend the client_lock to cover cl_lru
  nfsd4: use list_move in move_to_confirmed
  nfsd4: fold release_session into expire_client
  nfsd4: rename sessionid_lock to client_lock
  nfsd4: fix bare destroy_session null dereference
  nfsd4: use local variable in nfs4svc_encode_compoundres
  nfsd: further comment typos
  sunrpc: centralise most calls to svc_xprt_received
  nfsd4: fix unlikely race in session replay case
  nfsd4: fix filehandle comment
  ...

* 'nfs-for-2.6.35' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (78 commits)
  SUNRPC: Don't spam gssd with upcall requests when the kerberos key expired
  SUNRPC: Reorder the struct rpc_task fields
  SUNRPC: Remove the 'tk_magic' debugging field
  SUNRPC: Move the task->tk_bytes_sent and tk_rtt to struct rpc_rqst
  NFS: Don't call iput() in nfs_access_cache_shrinker
  NFS: Clean up nfs_access_zap_cache()
  NFS: Don't run nfs_access_cache_shrinker() when the mask is GFP_NOFS
  SUNRPC: Ensure rpcauth_prune_expired() respects the nr_to_scan parameter
  SUNRPC: Ensure memory shrinker doesn't waste time in rpcauth_prune_expired()
  SUNRPC: Dont run rpcauth_cache_shrinker() when gfp_mask is GFP_NOFS
  NFS: Read requests can use GFP_KERNEL.
  NFS: Clean up nfs_create_request()
  NFS: Don't use GFP_KERNEL in rpcsec_gss downcalls
  NFSv4: Don't use GFP_KERNEL allocations in state recovery
  SUNRPC: Fix xs_setup_bc_tcp()
  SUNRPC: Replace jiffies-based metrics with ktime-based metrics
  ktime: introduce ktime_to_ms()
  SUNRPC: RPC metrics and RTT estimator should use same RTT value
  NFS: Calldata for nfs4_renew_done()
  NFS: Squelch compiler warning in nfs_add_server_stats()
  ...

* 'bkl/procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  sunrpc: Include missing smp_lock.h
  procfs: Kill the bkl in ioctl
  procfs: Push down the bkl from ioctl
  procfs: Use generic_file_llseek in /proc/vmcore
  procfs: Use generic_file_llseek in /proc/kmsg
  procfs: Use generic_file_llseek in /proc/kcore
  procfs: Kill BKL in llseek on proc base

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: Add clocksource_register_hz/khz interface
  posix-cpu-timers: Optimize run_posix_cpu_timers()
  time: Remove xtime_cache
  mqueue: Convert message queue timeout to use hrtimers
  hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME
  timers: Introduce the concept of timer slack for legacy timers
  ntp: Remove tickadj
  ntp: Make time_adjust static
  time: Add xtime, wall_to_monotonic to feature-removal-schedule
  timer: Try to survive timer callback preempt_count leak
  timer: Split out timer function call
  timer: Print function name for timer callbacks modifying preemption count
  time: Clean up warp_clock()
  cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
  cpu-timers: Change SIGEV_NONE timer implementation
  cpu-timers: Return correct previous timer reload value
  cpu-timers: Cleanup arm_timer()
  cpu-timers: Simplify RLIMIT_CPU handling

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cs5535-clockevt: Free timer in IRQ setup error path

Merge branch 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hpet: Add reference to chipset erratum documentation for disable-hpet-msi-quirk
  x86, hpet: Restrict read back to affected ATI chipsets

Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Clear CPU mask in affinity_hint when none is provided
  genirq: Add CPU mask affinity hint
  genirq: Remove IRQF_DISABLED from core code
  genirq: Run irq handlers with interrupts disabled
  genirq: Introduce request_any_context_irq()
  genirq: Expose irq_desc->node in proc/irq

Fixed up trivial conflicts in Documentation/feature-removal-schedule.txt