- 03 May, 2017 13 commits
-
-
Ville Syrjälä authored
The pending_notify flag in the LPE audio platform data is pointless, actually unused. So let's kill it off. v2: Fix typo in patch subject Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-5-ville.syrjala@linux.intel.comReviewed-by:
Takashi Iwai <tiwai@suse.de>
-
Ville Syrjälä authored
vlv_display_irq_postinstall() enables the LPE audio interrupts regardless of whether the LPE audio irq chip has masked/unmasked them. Also the irqchip masking/unmasking doesn't consider the state of the display power well or the device, and hence just leads to dmesg spew when it tries to access the hardware while it's powered down. If the current way works, then we don't need to do anything in the mask/unmask hooks. If it doesn't work, well, then we'd need to properly track whether the irqchip has masked/unmasked the interrupts when we enable display interrupts. And the mask/unmask hooks would need to check whether display interrupts are even enabled before frobbing with he registers. So let's just assume the current way works and neuter the mask/unmask hooks. Also clean up vlv_display_irq_postinstall() a bit and stop it from trying to unmask/enable the LPE C interrupt on VLV since it doesn't exist. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Clear the notify function pointer in the platform data before we tear down the driver. Otherwise i915 would end up calling a stale function pointer and possibly explode. Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 0b6b524f ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by:
-
Chris Wilson authored
Rather than use a global modparam, we can just check to see if the engine has semaphores configured upon it. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-7-chris@chris-wilson.co.uk
-
Chris Wilson authored
As we may unwind the requests, even though the request we are awaiting has a global_seqno that seqno may be revoked during the await and so we can not reliably use it as a barrier for all future awaits on the same timeline. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
With the addition of the inter-context intel_time.sync map, having a very similar sync_seqno[] is confusing. Aide the reader by denoting that this is a pre-allocated array for storing semaphore sync points wrt to the global seqno. Signed-off-by:
-
Chris Wilson authored
Track the latest fence waited upon on each context, and only add a new asynchronous wait if the new fence is more recent than the recorded fence for that context. This requires us to filter out unordered timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the absence of a universal identifier, we have to use our own i915->mm.unordered_timeline token. v2: Throw around the debug crutches v3: Inline the likely case of the pre-allocation cache being full. v4: Drop the pre-allocation support, we can lose the most recent fence in case of allocation failure -- it just means we may emit more awaits than strictly necessary but will not break. v5: Trim allocation size for leaf nodes, they only need an array of u32 not pointers. v6: Create mock_timeline to tidy selftest writing v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko) v8: Prune the stale sync points when we idle. v9: Include a small benchmark in the kselftests v10: Separate the idr implementation into its own compartment. (Tvrkto) v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto) v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves v13: kselftests to investigate struct i915_syncmap itself (Tvrtko) v14: Foray into ascii art graphs v15: Take into account that the random lookup/insert does 2 prng calls, not 1, when benchmarking, and use for_each_set_bit() (Tvrtko) v16: Improved ascii art Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently we filter out repeated use of the same timeline in the low level i915_gem_request_await_request(), after having added the dependency on the old request. However, we can lift this to i915_gem_request_await_dma_fence() (before the dependency is added) using the observation that requests along the same timeline are explicitly ordered via i915_add_request (along with the dependencies). Signed-off-by:
-
Chris Wilson authored
By first unwrapping an incoming fence-array into its child fences, we can simplify the internal branching, and so avoid triggering a potential bug in the next patch when not squashing the child fences on the same timeline. It will also have the advantage of keeping the (top-level) fence arrays out of any fence/timeline caching since these are unordered timelines but with a random context id. Signed-off-by:
-
Chris Wilson authored
2 clflushes on two different objects are not ordered, and so do not belong to the same timeline (context). Either we use a unique context for each, or we reserve a special global context to mean unordered. Ideally, we would reserve 0 to mean unordered (DMA_FENCE_NO_CONTEXT) to have the same semantics everywhere. Signed-off-by:
-
Mika Kuoppala authored
Replace the handcrafter loop when checking for fifo slots with atomic wait for. This brings this wait in line with the other waits on register access. We also get a readable timeout constraint, so make it to fail after 10ms. Chris suggested that we should fail silently as the fifo debug handler, now attached to unclaimed mmio handling, will take care of the possible errors at later stage. Note that the decision to wait was changed so that we avoid allocating the first reserved entry. Nor do we reduce the count if we fail the wait, removing the possiblity to wrap the count if the hw fifo returned zero. v2: remove unclaimed check on timeout (Chris) v3: use void return (Chris) References: https://bugs.freedesktop.org/show_bug.cgi?id=100247Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Remove the per-mmio checking of the FIFO debug register into the common conditional mmio debug handling. Based on patch from Chris Wilson. v2: postpone warn on fifodbg for unclaimed reg debugs Signed-off-by:
-
- 02 May, 2017 3 commits
-
-
Michal Wajdeczko authored
It is safer to setup valid send function after successful GuC hardware initialization. In addition we prepare placeholder where we can setup any alternate GuC communication mechanism. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170502103243.54940-1-michal.wajdeczko@intel.com [ickle: Fixup ENODEV for an impossible error path] Signed-off-by:
-
Joonas Lahtinen authored
Add intel_irq_fini() for placing the deinitialization code, starting with freeing dev_priv->l3_parity.remap_info[]. Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 28 Apr, 2017 6 commits
-
-
Ander Conselvan de Oliveira authored
The sequence in glk_dsi_device_ready() enters ULPS then waits until it is *not* active to then disable it. The correct sequence according to the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS is active, and then disable ULPS. Fixing the condition gets rid of the following spurious error messages: [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active Fixes: 46448483 ("drm/i915/glk: Add MIPIIO Enable/disable sequence") Cc: Deepak M <m.deepak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Madhav Chauhan <madhav.chauhan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com
-
Joonas Lahtinen authored
CCID register existed already on ILK according to the PRM (Chris verified the address to match too). Signed-off-by:
-
Joonas Lahtinen authored
ILK should survive a reset without display corruption. Suggested-by:
-
Joonas Lahtinen authored
HAS_HW_CONTEXTS is misleading condition for GPU reset and CCID, replace it with Gen specific (to be updated in next patches). HAS_HW_CONTEXTS in i915_l3_write is bogus because each HAS_L3_DPF match also has .has_hw_contexts = 1 set. This leads to us being able to get rid of the property completely. v2: - Keep the checks at Gen6 for no functional change (Ville) Signed-off-by:
-
Joonas Lahtinen authored
Pre-calculate engine context size based on engine class and device generation and store it in the engine instance. v2: - Squash and get rid of hw_context_size (Chris) v3: - Move after MMIO init for probing on Gen7 and 8 (Chris) - Retained rounding (Tvrtko) v4: - Rebase for deferred legacy context allocation Signed-off-by:
-
Tvrtko Ursulin authored
Looks like intel_guc_reset had the ability to sleep under the uncore spinlock since forever but it wasn't detected until the recent changes annotated the wait for register with might_sleep. I have fixed it by removing holding of the uncore spinlock over the call to gen6_hw_domain_reset, since I do not see that is really needed. But there is always a possibility I am missing some nasty detail so please double check. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
-
- 27 Apr, 2017 3 commits
-
-
Chris Wilson authored
Almost from the outset for execlists, we used deferred allocation of the logical context and rings. Then we ported the infrastructure for pinning contexts back to legacy, and so now we are able to also implement deferred allocation for context objects prior to first use on the legacy submission. v2: We still need to differentiate between legacy engines, Joonas is fixing that but I want this first ;) (Joonas) Signed-off-by:
-
Michel Thierry authored
As all other functions related to resetting engines are using reset_engine. v2: remove _request_ and use start/cancel instead (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Michel Thierry authored
It has been replaced by I915_RESET_BACKOFF / I915_RESET_HANDOFF. Signed-off-by:
-
- 26 Apr, 2017 2 commits
-
-
Ander Conselvan de Oliveira authored
Display workaround #1139 for Geminilake instructs us to restrict HDMI to 8 bpc when htotal is greater than 5460. Otherwise, the pipe is unable to generate a proper signal and is left in a state where corruption is seen with other modes. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100440 Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170424104718.26448-1-ander.conselvan.de.oliveira@intel.com
-
Chris Wilson authored
If we are enabling the breadcrumbs signaling prior to submitting the request, we know that we cannot have missed the interrupt and can therefore skip immediately waking the signaler to check. This reduces a significant chunk of the __i915_gem_request_submit() overhead for inter-engine synchronisation, for example in gem_exec_whisper. Signed-off-by:
-
- 25 Apr, 2017 3 commits
-
-
Chris Wilson authored
If we poison the request before we emit commands, it should be easier to spot when we execute an uninitialised request. References: https://bugs.freedesktop.org/show_bug.cgi?id=100144Signed-off-by:
-
Chris Wilson authored
We need to keep track of the last location we ask the hw to read up to (RING_TAIL) separately from our last write location into the ring, so that in the event of a GPU reset we do not tell the HW to proceed into a partially written request (which can happen if that request is waiting for an external signal before being executed). v2: Refactor intel_ring_reset() (Mika) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144 Testcase: igt/gem_exec_fence/await-hang Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests") Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission") Signed-off-by:
-
Chris Wilson authored
As we now share the execlist_port[] tracking for both execlists/guc, we can reset the inflight count on both and report which requests are being restarted. Suggested-by:
-
- 24 Apr, 2017 1 commit
-
-
Chris Wilson authored
Knowing the neighbouring seqno (current on hw, last submitted to hw) provide some useful breadcrumbs to the debug log. Signed-off-by:
-
- 22 Apr, 2017 1 commit
-
-
Chris Wilson authored
Although we do check the completion-status of the request before actually adding a wait on it (either to its submit fence or its completion dma-fence), we currently do not check before adding it to the dependency lists. In fact, without checking for a completed request we may try to use the signaler after it has been retired and its dependency tree freed: [ 60.044057] BUG: KASAN: use-after-free in __list_add_valid+0x1d/0xd0 at addr ffff880348c9e6a0 [ 60.044118] Read of size 8 by task gem_exec_fence/530 [ 60.044164] CPU: 1 PID: 530 Comm: gem_exec_fence Tainted: G E 4.11.0-rc7+ #46 [ 60.044226] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2 [ 60.044290] Call Trace: [ 60.044337] dump_stack+0x4d/0x6a [ 60.044383] kasan_object_err+0x21/0x70 [ 60.044435] kasan_report+0x225/0x4e0 [ 60.044488] ? __list_add_valid+0x1d/0xd0 [ 60.044534] ? kasan_kmalloc+0xad/0xe0 [ 60.044587] __asan_load8+0x5e/0x70 [ 60.044639] __list_add_valid+0x1d/0xd0 [ 60.044788] __i915_priotree_add_dependency+0x67/0x130 [i915] [ 60.044895] i915_gem_request_await_request+0xa8/0x370 [i915] [ 60.044974] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.045049] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.045077] ? save_stack+0xb1/0xd0 [ 60.045105] ? save_stack_trace+0x1b/0x20 [ 60.045132] ? save_stack+0x46/0xd0 [ 60.045158] ? kasan_kmalloc+0xad/0xe0 [ 60.045184] ? __kmalloc+0xd8/0x670 [ 60.045229] ? drm_ioctl+0x359/0x640 [drm] [ 60.045256] ? SyS_ioctl+0x41/0x70 [ 60.045330] ? i915_vma_move_to_active+0x540/0x540 [i915] [ 60.045360] ? tty_insert_flip_string_flags+0xa1/0xf0 [ 60.045387] ? tty_flip_buffer_push+0x63/0x70 [ 60.045414] ? remove_wait_queue+0xa9/0xc0 [ 60.045441] ? kasan_unpoison_shadow+0x35/0x50 [ 60.045467] ? kasan_kmalloc+0xad/0xe0 [ 60.045494] ? kasan_check_write+0x14/0x20 [ 60.045568] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.045616] drm_ioctl+0x359/0x640 [drm] [ 60.045705] ? i915_gem_execbuffer+0x5a0/0x5a0 [i915] [ 60.045751] ? drm_version+0x150/0x150 [drm] [ 60.045778] ? compat_start_thread+0x60/0x60 [ 60.045805] ? plist_del+0xda/0x1a0 [ 60.045833] do_vfs_ioctl+0x12e/0x910 [ 60.045860] ? ioctl_preallocate+0x130/0x130 [ 60.045886] ? pci_mmcfg_check_reserved+0xc0/0xc0 [ 60.045913] ? vfs_write+0x196/0x240 [ 60.045939] ? __fget_light+0xa7/0xc0 [ 60.045965] SyS_ioctl+0x41/0x70 [ 60.045991] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.046017] RIP: 0033:0x7feb2baefc47 [ 60.046042] RSP: 002b:00007fff56d28e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 60.046075] RAX: ffffffffffffffda RBX: 00007fff56d290a8 RCX: 00007feb2baefc47 [ 60.046102] RDX: 00007fff56d29050 RSI: 00000000c0406469 RDI: 0000000000000003 [ 60.046129] RBP: 00007fff56d29050 R08: 000055ecc4cd27d0 R09: 00007feb2bda8600 [ 60.046154] R10: 0000000000000073 R11: 0000000000000246 R12: 00000000c0406469 [ 60.046177] R13: 0000000000000003 R14: 000000000000000f R15: 0000000000000099 [ 60.046203] Object at ffff880348c9e680, in cache i915_dependency size: 64 [ 60.046225] Allocated: [ 60.046246] PID = 530 [ 60.046269] save_stack_trace+0x1b/0x20 [ 60.046292] save_stack+0x46/0xd0 [ 60.046318] kasan_kmalloc+0xad/0xe0 [ 60.046343] kasan_slab_alloc+0x12/0x20 [ 60.046368] kmem_cache_alloc+0xab/0x650 [ 60.046445] i915_gem_request_await_request+0x88/0x370 [i915] [ 60.046559] i915_gem_request_await_dma_fence+0x129/0x140 [i915] [ 60.046705] i915_gem_do_execbuffer.isra.37+0xb0a/0x26b0 [i915] [ 60.046849] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.046936] drm_ioctl+0x359/0x640 [drm] [ 60.046987] do_vfs_ioctl+0x12e/0x910 [ 60.047038] SyS_ioctl+0x41/0x70 [ 60.047090] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.047139] Freed: [ 60.047179] PID = 530 [ 60.047223] save_stack_trace+0x1b/0x20 [ 60.047269] save_stack+0x46/0xd0 [ 60.047317] kasan_slab_free+0x72/0xc0 [ 60.047366] kmem_cache_free+0x39/0x160 [ 60.047512] i915_gem_request_retire+0x83f/0x930 [i915] [ 60.047657] i915_gem_request_alloc+0x166/0x600 [i915] [ 60.047799] i915_gem_do_execbuffer.isra.37+0xad8/0x26b0 [i915] [ 60.047897] i915_gem_execbuffer2+0xdb/0x2a0 [i915] [ 60.047942] drm_ioctl+0x359/0x640 [drm] [ 60.047968] do_vfs_ioctl+0x12e/0x910 [ 60.047993] SyS_ioctl+0x41/0x70 [ 60.048019] entry_SYSCALL_64_fastpath+0x17/0x98 [ 60.048044] Memory state around the buggy address: [ 60.048066] ffff880348c9e580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048105] ffff880348c9e600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048138] >ffff880348c9e680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 60.048170] ^ [ 60.048191] ffff880348c9e700: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 60.048225] ffff880348c9e780: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc Note to hit the use-after-free requires us to be passed back a request via a fence-array, that is from explicit fencing accumulated into a sync-file fence-array. Fixes: 52e54209 ("drm/i915/scheduler: Record all dependencies upon request construction") Testcase: igt/gem_exec_fence/expired-history Signed-off-by:
-
- 21 Apr, 2017 2 commits
-
-
Chris Wilson authored
The busy-spin, as the first stage of intel_wait_for_register(), is currently under suspicion for causing: [ 62.034926] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1 [ 62.034928] Modules linked in: i2c_dev i915 intel_gtt drm_kms_helper prime_numbers [ 62.034932] CPU: 1 PID: 183 Comm: kworker/1:2 Not tainted 4.11.0-rc7+ #471 [ 62.034933] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 62.034934] Workqueue: pm pm_runtime_work [ 62.034936] task: ffff880275a04ec0 task.stack: ffffc900002d8000 [ 62.034936] RIP: 0010:__intel_wait_for_register_fw+0x77/0x1a0 [i915] [ 62.034937] RSP: 0018:ffffc900002dbc38 EFLAGS: 00000082 [ 62.034939] RAX: ffffc90003530094 RBX: 0000000000130094 RCX: 0000000000000001 [ 62.034940] RDX: 00000000000000a1 RSI: ffff88027fd15e58 RDI: 0000000000000000 [ 62.034941] RBP: ffffc900002dbc78 R08: 0000000000000002 R09: 0000000000000000 [ 62.034942] R10: ffffc900002dbc18 R11: ffff880276429dd0 R12: ffff8802707c0000 [ 62.034943] R13: 00000000000000a0 R14: 0000000000000000 R15: 00000000fffefc10 [ 62.034945] FS: 0000000000000000(0000) GS:ffff88027fd00000(0000) knlGS:0000000000000000 [ 62.034945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.034947] CR2: 00007ffd3cd98ff8 CR3: 0000000274c19000 CR4: 00000000001006e0 [ 62.034947] Call Trace: [ 62.034948] intel_wait_for_register+0x77/0x140 [i915] [ 62.034949] vlv_suspend_complete+0x23/0x5b0 [i915] [ 62.034950] intel_runtime_suspend+0x16c/0x2a0 [i915] [ 62.034950] pci_pm_runtime_suspend+0x50/0x180 [ 62.034951] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034952] __rpm_callback+0xc5/0x210 [ 62.034953] rpm_callback+0x1f/0x80 [ 62.034953] ? pci_pm_runtime_resume+0xa0/0xa0 [ 62.034954] rpm_suspend+0x118/0x580 [ 62.034955] pm_runtime_work+0x64/0x90 [ 62.034956] process_one_work+0x1bb/0x3e0 [ 62.034956] worker_thread+0x46/0x4f0 [ 62.034957] ? __schedule+0x18b/0x610 [ 62.034958] kthread+0xff/0x140 [ 62.034958] ? process_one_work+0x3e0/0x3e0 [ 62.034959] ? kthread_create_on_node+ and related hard lockups in CI for byt and bsw. Note this effectively reverts commits 41ce405e and b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") v2: Convert bool allow into a u32 mask for clarity and repeat the comment on vlv rc6 timing to justify the 3ms timeout used for the wait (Ville) Fixes: 41ce405e ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Fixes: b2736695 ("drm/i915: Convert wait_for(I915_READ(reg)) to intel_wait_for_register()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100718Signed-off-by:
Tomi Sarvela <tomi.p.sarvela@intel.com>
-
Chris Wilson authored
The hangcheck runs independently to the main flow of seqno through the driver. However, we have an odd coupling of the seqno reset that is unwelcome, and if poked at just the right rate can cause spurious hangs (e.g. gem_exec_whisper) on an apparently idle engine. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421083113.21321-1-chris@chris-wilson.co.uk
-
- 20 Apr, 2017 2 commits
-
-
Chris Wilson authored
The contents of a ring are only valid between HEAD and TAIL, when the ring is idle (HEAD == TAIL) we can simply let the pages go under memory pressure if they are not pinned by an active context. Any new content will be written after HEAD and so the ring will again be valid between HEAD and TAIL, everything outside can be discarded. Note that we take care of ensuring that we do not reset the HEAD backwards following a GPU hang on an idle ring. The same precautions are what enable us to use stolen memory for rings. Signed-off-by:
-
Chris Wilson authored
Avoid having too large a stack by creating the fake struct inode/file on the heap instead. drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file': drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free': drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=] Reported-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 66d9cb5d ("drm/i915: Mock the GEM device for self-testing") Signed-off-by:
-
- 19 Apr, 2017 2 commits
-
-
Kees Cook authored
While highly unlikely, this makes sure that the string built from engine names won't be processed as a format string. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170411045630.GA6612@beast
-
Tvrtko Ursulin authored
Move the BUILD_BUG_ONs for busy-wait duration outside the _wait_for_atomic macro as discussed on the mailing list. v2: Simplify the macro by omitting the ret__ local. (Chris Wilson) Signed-off-by:
-
- 18 Apr, 2017 2 commits
-
-
Mika Kuoppala authored
Previously with commit a9c1f90c ("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain, seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed to be unmasked for IVB and SNB in order to prevent system hang with chained batchbuffers. Our CI was seeing incomplete results with tests that used chained batches and it was found out that HSW needs to have this same bit unmasked to reliably survive chained batches. Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to prevent system hang with batch chaining. Testcase: igt/gem_exec_fence/nb-await-default Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
