- 20 Nov, 2019 40 commits
-
-
Matthew Whitehead authored
[ Upstream commit 03b099bd ] There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jia Zhang <qianyue.zj@alibaba-inc.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.comSigned-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 06983aa5 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 2b49117a ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit b78ac6ec ] Allow the configuration of the MDIO clock divider when the Device Tree contains 'clock-frequency' property (similar to I2C and SPI buses). Because the hardware may have lost its state during suspend/resume, re-apply the MDIO clock divider upon resumption. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Prashant Bhole authored
[ Upstream commit 32c00979 ] following commit: commit d58e468b ("flow_dissector: implements flow dissector BPF hook") added struct bpf_flow_keys which conflicts with the struct with same name in sockex2_kern.c and sockex3_kern.c similar to commit: commit 534e0e52 ("samples/bpf: fix a compilation failure") we tried the rename it "flow_keys" but it also conflicted with struct having same name in include/net/flow_dissector.h. Hence renaming the struct to "flow_key_record". Also, this commit doesn't fix the compilation error completely because the similar struct is present in sockex3_kern.c. Hence renaming it in both files sockex3_user.c and sockex3_kern.c Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit c4eed62a ] The secondary bus reset may have link side effects that a hotplug capable port may incorrectly react to. Use the slot specific reset for hotplug ports, fixing the undesirable link down-up handling during error recovering. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: fold in https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit 9d938ea5 ] The AER driver has never read the config space of an endpoint that reported a fatal error because the link to that device is considered unreliable. An ERR_FATAL from an upstream port almost certainly indicates an error on its upstream link, so we can't expect to reliably read its config space for the same reason. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit 60271ab0 ] Error handling may be running in parallel with a hot removal. Reference count the device during AER handling so the device can not be freed while AER wants to reference it. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shahed Shaikh authored
[ Upstream commit 75a110a1 ] This is a workaround for FW bug - MFW generates bandwidth attention in single function mode, which is only expected to be generated in multi function mode. This undesired attention in SF mode results in incorrect HW configuration and resulting into Tx timeout. Signed-off-by: Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit 1ba23b1d ] SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the name enables dtc SPI bus checks. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Baruch Siach authored
[ Upstream commit e807f029 ] The vmmc phandle, like all power supply property names, must have the '-supply' suffix. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yannick Fertré authored
[ Upstream commit 67330599 ] Enable panel raydium RM68200, DSI bridge & display controller. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit 7401a633 ] Clear the MCE struct which is used for collecting the injection details after injection. Also, populate it with more details from the machine. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20180905081954.10391-1-bp@alien8.deSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit cf680cc5 ] dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/dove-cubox.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60" arch/arm/boot/dts/dove-cubox-es.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60" arch/arm/boot/dts/dove-cubox.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi' arch/arm/boot/dts/dove-cubox-es.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi' arch/arm/boot/dts/dove-dove-db.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi' arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi' arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@14600: node name for SPI buses should be 'spi' arch/arm/boot/dts/orion5x-kuroboxpro.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32" arch/arm/boot/dts/orion5x-linkstation-lschl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32" arch/arm/boot/dts/orion5x-linkstation-lsgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32" arch/arm/boot/dts/orion5x-linkstation-lswtgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32" Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stefan Agner authored
[ Upstream commit cd560235 ] The table id (second) argument to MODULE_DEVICE_TABLE is often referenced otherwise. This is not the case for CPU features. This leads to a warning when building the kernel with Clang: arch/arm/crypto/crc32-ce-glue.c:239:33: warning: variable 'crc32_cpu_feature' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct cpu_feature crc32_cpu_feature[] = { ^ Avoid warnings by using __maybe_unused, similar to commit 1f318a8b ("modules: mark __inittest/__exittest as __maybe_unused"). Fixes: 2a9faf8b ("crypto: arm/crc32 - enable module autoloading based on CPU feature bits") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stefan Agner authored
[ Upstream commit c785896b ] The table id (second) argument to MODULE_DEVICE_TABLE is often referenced otherwise. This is not the case for CPU features. This leads to warnings when building the kernel with Clang: arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable 'cpu_feature_match_AES' is not needed and will not be emitted [-Wunneeded-internal-declaration] module_cpu_feature_match(AES, aes_init); ^ Avoid warnings by using __maybe_unused, similar to commit 1f318a8b ("modules: mark __inittest/__exittest as __maybe_unused"). Fixes: 67bad2fd ("cpu: add generic support for CPU feature based module autoloading") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Biggers authored
[ Upstream commit a5e9f557 ] In commit 9f480fae ("crypto: chacha20 - Fix keystream alignment for chacha20_block()"), I had missed that chacha20_block() can be called directly on the buffer passed to get_random_bytes(), which can have any alignment. So, while my commit didn't break anything, it didn't fully solve the alignment problems. Revert my solution and just update chacha20_block() to use put_unaligned_le32(), so the output buffer need not be aligned. This is simpler, and on many CPUs it's the same speed. But, I kept the 'tmp' buffers in extract_crng_user() and _get_random_bytes() 4-byte aligned, since that alignment is actually needed for _crng_backtrack_protect() too. Reported-by: Stephan Müller <smueller@chronox.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 8cfde784 ] Clang warns when one enumerated type is converted implicitly to another: drivers/spi/spi-pic32.c:323:8: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ drivers/spi/spi-pic32.c:333:8: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_TO_DEVICE, ^~~~~~~~~~~~~ 2 warnings generated. Use the proper enums from dma_transfer_direction (DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2, DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1) to satify Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/159Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit 2f967f9e ] SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Linus Walleij authored
[ Upstream commit ecde2956 ] The "lcdaclk_b_1" group is muxed with the function "lcd" but needs a separate entry to be muxed in with "lcda" rather than "lcd". Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 2f217d24 ] The unit address of the Cortex-A9 SCU device node contains one zero too many. Remove it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chao Yu authored
[ Upstream commit dc4cd125 ] Step to reproduce this bug: 1. logon as root 2. mount -t f2fs /dev/sdd /mnt; 3. touch /mnt/file; 4. chown system /mnt/file; chgrp system /mnt/file; 5. xfs_io -f /mnt/file -c "fsync"; 6. godown /mnt; 7. umount /mnt; 8. mount -t f2fs /dev/sdd /mnt; After step 8) we will expect file's uid/gid are all system, but during recovery, these two fields were not been recovered, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jaegeuk Kim authored
[ Upstream commit f84262b0 ] If we have an error in f2fs_build_free_nids, we're able to fall into a loop to find free nids. Suggested-by: Chao Yu <chao@kernel.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rob Herring authored
[ Upstream commit cc893871 ] dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/am437x-idk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am437x-sk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am43x-epos-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/omap3-n9.dtb: Warning (i2c_bus_reg): /ocp@68000000/i2c@48060000/ak8975@0f: I2C bus unit address format error, expected "f" arch/arm/boot/dts/am335x-osd3358-sm-red.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/pressure@78: I2C bus unit address format error, expected "76" arch/arm/boot/dts/am335x-boneblack.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am335x-boneblack-wireless.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am335x-sancloud-bbe.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am571x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am572x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am574x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am57xx-cl-som-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am57xx-sbc-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra72-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra72-evm-revc.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra76-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra7-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am335x-pdu001.dtb: Warning (spi_bus_reg): /ocp/spi@481a0000/cfaf240320a032t: SPI bus unit address format error, expected "0" arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi' arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi' Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> [tony@atomide.com: fixed mode to 644 for am335x-osd3358-sm-red.dts while at it] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Grygorii Strashko authored
[ Upstream commit dcbf6b18 ] am335x-evm has only one CPSW external port physically wired, but DT defines 2 ext. ports. As result, PHY connection failure reported for the second ext. port. Update DT to reflect am335x-evm board HW configuration, and, while here, switch to use phy-handle instead of phy_id. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit c29de841 ] The PCI port driver saves the PCI state after initializing the device with the applicable service devices. This was, however, before the service drivers were even registered because PCI probe happens before the device_initcall initialized those service drivers. The config space state that the services set up were not being saved. The end result would cause PCI devices to not react to events that the drivers think they did if the PCI state ever needed to be restored. Fix this by changing the service drivers from using the init calls to having the portdrv driver calling the services directly. This will get the state saved as desired, while making the relationship between the port driver and the services under it more explicit in the code. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Petr Machata authored
[ Upstream commit a9f36656 ] With introduction of MC-aware mode to mlxsw, it became necessary to configure TCs above 7 as well. There is now code in mlxsw to disable ETS for these higher classes, but disablement of max shaper was neglected. By default, max shaper is currently disabled to begin with, so the problem is just cosmetic. However, for symmetry, do like we do for ETS configuration, and call mlxsw_sp_port_ets_maxrate_set() for both TC i and i + 8. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 6c3efbe7 ] The ucode chunk might be relatively large and the allocation with kmalloc() may fail occasionally. Since the data isn't DMA-transferred but by manual loops, we can use vmalloc instead of kmalloc. For a better performance, though, kvmalloc() would be the best choice in such a case, so let's replace with it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103431Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arend van Spriel authored
[ Upstream commit 59c2a30d ] When obtaining the firmware capability a buffer is provided of 512 bytes. However, if all features in firmware are supported the buffer needs to be 565 bytes as otherwise truncated information is retrieved from firmware. Increasing the buffer to 768 bytes on stack. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vasily Gorbik authored
[ Upstream commit 26f4414a ] Correct stack frame overhead for 31-bit vdso, which should be 96 rather then 160. This is done by reusing STACK_FRAME_OVERHEAD definition which contains correct value based on build flags. This fixes stack unwinding within vdso code for 31-bit processes. While at it replace all hard coded stack frame overhead values with the same definition in vdso64 as well. Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vasily Gorbik authored
[ Upstream commit d1befa65 ] vdso_fault used is_compat_task function (on s390 it tests "current" thread_info flags) to distinguish compat tasks and map 31-bit vdso pages. But "current" task might not correspond to mm context. When 31-bit compat inferior is executed under gdb, gdb does PTRACE_PEEKTEXT on vdso page, causing vdso_fault with "current" being 64-bit gdb process. So, 31-bit inferior ends up with 64-bit vdso mapped. To avoid this problem a new compat_mm flag has been introduced into mm context. This flag is used in vdso_fault and vdso_mremap instead of is_compat_task. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Halil Pasic authored
[ Upstream commit 1c472d46 ] The AP bus scan is aborted before doing anything worth mentioning if ap_select_domain() fails, e.g. if the ap_rights.aqm mask is all zeros. As the result of this the ap bus fails to manage (e.g. create and register) devices like it is supposed to. Let us make ap_scan_bus() work even if ap_select_domain() can't select a default domain. Let's also make ap_select_domain() return void, as there are no more callers interested in its return value. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Michael Mueller <mimu@linux.ibm.com> Fixes: 7e0bdbe5 "s390/zcrypt: AP bus support for alternate driver(s)" [freude@linux.ibm.com: title and patch header slightly modified] Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Guido Kiener authored
[ Upstream commit 0e59088e ] Add parameter 'tag' to function usbtmc_ioctl_abort_bulk_out_tag() for future versions. Use USBTMC_BUFSIZE (4k) instead of USBTMC_SIZE_IOBUFFER (2k). Using USBTMC_SIZE_IOBUFFER is deprecated. Insert a sleep of 50 ms between subsequent CHECK_ABORT_BULK_OUT_STATUS control requests to avoid stressing the instrument with repeated requests. Use common macro USB_CTRL_GET_TIMEOUT instead of USBTMC_TIMEOUT. Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Reviewed-by: Steve Bayless <steve_bayless@keysight.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Loic Poulain authored
[ Upstream commit 59739131 ] At OTG work running time, it's possible that several events need to be addressed (e.g. ID and VBUS events). The current implementation handles only one event at a time which leads to ignoring the other one. Fix it. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicolas Adell authored
[ Upstream commit 1dedbdf2 ] When initializing the USB subsystem before starting the kernel, OTG overcurrent detection is disabled. In case the OTG polarity of overcurrent is low active, the overcurrent detection is never enabled again and events cannot be reported as expected. Because imx usb overcurrent polarity is low active by default, only detection needs to be enable in usbmisc init function. Signed-off-by: Nicolas Adell <nicolas.adell@actia.fr> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 23d9f553 ] NFP supports fairly enormous ring sizes (up to 256k descriptors). In commit 46627170 ("nfp: use kvcalloc() to allocate SW buffer descriptor arrays") we have started using kvcalloc() functions to make sure the allocation of software state arrays doesn't hit the MAX_ORDER limit. Unfortunately, we can't use virtual mappings for the DMA region holding HW descriptors. In case this allocation fails instead of the generic (and fairly scary) warning/splat in the logs print a helpful message explaining what happened and suggesting how to fix it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit 32c7fbc8 ] So far all the places calling hclge_tm_q_to_qs_map_cfg() are assigning an u16 type value to "q_id", and in the processing of hclge_tm_q_to_qs_map_cfg(), it also converts the "q_id" to le16. The max tqp number for pf can be more than 256, we should use "u16" to store the queue id, instead of "u8", which may cause data lost. Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit d9f28fc2 ] When roce is loaded before nic, the roce client will not be initialized until nic client is initialized, but roce init flag is set before it. Furthermore, in this case of nic initialized success and roce failed, the nic init flag is not set, and roce init flag is not cleared. This patch fixes it by set init flag only after the client is initialized successfully. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit 49dd8054 ] If initialize client failed or finish uninitializing client, we should clear the client pointer. It may cause unexpected result when use uninitialized client. Meanwhile, we also should check whether client exist when uninitialize it. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit 37dc9cdb ] According to hardware's description, the head pointer register should be written before the tail pointer register while initializing the vf command queue. Otherwise, it may trigger an interrupt even though there is no command received. Fixes: fedd0c15 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-