Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

Fixing typos in kernel-doc function descriptions in fs/befs/btree.c.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

Fixing the following checkpatch.pl error:

ERROR: "foo * bar" should be "foo *bar"
+befs_load_sb(struct super_block *sb, befs_super_block * disk_sb)

And the following warnings:

WARNING: suspect code indent for conditional statements (8, 12)
+       if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_LE)
+           befs_sb->byte_order = BEFS_BYTESEX_LE;

WARNING: suspect code indent for conditional statements (8, 12)
+       else if (disk_sb->fs_byte_order == BEFS_BYTEORDER_NATIVE_BE)
+           befs_sb->byte_order = BEFS_BYTESEX_BE;

WARNING: break quoted strings at a space character
+               befs_error(sb, "blocksize(%u) cannot be larger"
+                          "than system pagesize(%lu)", befs_sb->block_size,

WARNING: line over 80 characters
+       if (befs_sb->log_start != befs_sb->log_end || befs_sb->flags == BEFS_DIRTY) {
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

The description of befs_load_sb was confusing the kernel-doc system since,
because it starts with /**, it thinks it will document the function with
kernel-doc formatting. Which it isn't.

Fix other comment style issues in the file while we are at it.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

ag_shift and blocks_per_ag contain the same information in different ways,
same as block_shift and block_size do. It is worth checking this two are
consistent, but since blocks_per_ag isn't documented as mandatory to use
some implementations of befs don't enforce this, so making it non-fatal if
they don't match and just having it as a warning.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

befs_dump_super_block() wasn't giving the inode_size information when
dumping all elements of the superblock. Add this element to have complete
information of the superblock.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

There is no need to init block, since it will be overwitten later by
iaddr2blockno().
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Fixing jornal to Journal.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

For validating superblock state, add flags field to befs_sb_info, read the state from the disk
and check if it is equal to BEFS_DIRTY.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Fixing skeep to skip.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

befs_btree_find(), the only caller of befs_find_key(), only cares about if
the return from that function is BEFS_BT_MATCH or not. It never uses the
partial match given with BEFS_BT_PARMATCH. Make the overflow return clearer
by having BEFS_BT_OVERFLOW instead of BEFS_BT_PARMATCH.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>

ret is initialized to -EIO and is never modified, so remove ret and use
-EIO directly.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

There is no need to init res, since it will be overwitten later by
befs_fblock2brun().
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Remove *befs_sb and just call BEFS_SB(sb) directly, since the returned
value by this function is only used once.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

node_off is unconditionally set to bt_super.root_node_ptr, so no need to
init it to zero.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

There is no need to set *value, it will be overwritten later.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

As VFS expects, lookup inserts NULL inode to dentry when the named inode
does not exist.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

The calls to brelse are useless since dbl_indir_block and indir_block
are NULL.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Constant has to be capitalized.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

The only caller of befs_find_brun_direct is befs_fblock2brun, which
already validates that the block is within the range of direct blocks.
So remove the duplicate validation.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Fixing a grammatical error in the documentation.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

The only place the values of free_node_ptr and max_size are read is in
befs_dump_index_entry(), which both times it is called, it is passed the on
disk superblock. Removing assignment of unused values.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

befs_error() is used in potential errors that could happen in befs to
provide informational log messages. befs_debug() is silent when
CONFIG_BEFS_DEBUG=no, and very verbose when switched on, which is why it is
used for general debugging but not for errors.

Fix a few cases where the befs debug utility usage isn't following the
expected pattern. To make sure we have consistent information in the logs.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Replace goto with simpler while loop to make befs_readdir() more readable.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Use macro directly instead of via assigning it to an unchanging variable.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Salah Triki <salah.triki@gmail.com>

No need to dereference dentry twice to get the name when we already have
it stored in a local variable.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

This comment with a mysterious unfinished line confuses the kernel-doc
system since, because it starts with /**, it thinks it is documenting a
function.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>

Log error only when silent flag is not set.

Fixes: dbe6460388bc ("fs/befs/linuxvfs.c: check silent flag before logging errors")
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Acked-by: Salah Triki <salah.triki@gmail.com>

Since befs_bread merely calls sb_bread, replace it by sb_bread.

Link: http://lkml.kernel.org/r/1466800258-4542-1-git-send-email-salah.triki@gmail.comSigned-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

befs_iaddr_is_empty() and befs_brun_size() are unused. Remove them.

Link: http://lkml.kernel.org/r/1465700235-22881-3-git-send-email-luisbg@osg.samsung.comSigned-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Documentation of function befs_load_cb() lists it as load_befs_sb().  Fix
the misnomer.

Link: http://lkml.kernel.org/r/1465700235-22881-2-git-send-email-luisbg@osg.samsung.comSigned-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Confirm sb_min_blocksize() succeeded before continuing.

Link: http://lkml.kernel.org/r/1465700235-22881-1-git-send-email-luisbg@osg.samsung.comSigned-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove pr_err since kmem_cache_create log error and dump stack.

Link: http://lkml.kernel.org/r/e6d03cbc9542495dc6174b59e32fcd41c1393cfc.1464226521.git.salah.triki@acm.orgSigned-off-by: Salah Triki <salah.triki@acm.org>

Remove befs_error since when kmalloc fails there is a generic out of
memory and stack dump.

Link: http://lkml.kernel.org/r/3de4d388d98bbb570462a5eb8e64623e17fb5d74.1464226521.git.salah.triki@acm.orgSigned-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove pr_err since when kzalloc fails there is a generic out of memory
and stack dump.

Link: http://lkml.kernel.org/r/c5a7f2d42ec0fc8465c118248e88cd221c483391.1464226521.git.salah.triki@acm.orgSigned-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Log errors only when silent flag is not set.

Link: http://lkml.kernel.org/r/d400aaf5a7430de79bd956e40ec075fb1cb08474.1464226521.git.salah.triki@acm.orgSigned-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Control is transfered to unacquire_none when sb->s_fs_info is equal to
NULL, so the assignment to NULL is useless and it is moved above
unacquire_none.

Link: http://lkml.kernel.org/r/ed41da113fc693c7daa4e8813ca04cc766ddfc05.1464226521.git.salah.triki@acm.orgSigned-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull ARM fixes from Russell King:
 "Three relatively small fixes for ARM:

   - Roger noticed that dma_max_pfn() was calculating the upper limit
     wrongly, by adding the PFN offset of memory twice.

   - A fix from Robin to correct parsing of MPIDR values when the
     address size is larger than one BE32 unit.

   - A fix from Srinivas to ensure that we do not rely on the boot
     loader (or previous Linux kernel) setting the translation table
     base register a certain way in the decompressor, which can lead to
     crashes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  ARM: 8617/1: dma: fix dma_max_pfn()
  ARM: 8616/1: dt: Respect property size when parsing CPUs

If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece458 ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>