i.MX device tree changes for 5.8:

- A series from Anson Huang updating SRC devices to match bindings
  schema definition.
- Correct CPU supply name and add cpu1 supply for i.MX7D.
- Convert thermal device to use nvmem interface to get fuse data
  for imx6qdl and imx6sl.
- A series from Tim Harvey to update imx6qdl-gw devices, adding support
  of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc.
- Add input MUX for ENET2 MDIO into IMX7D pin functions.
- Misc random device addition or update.

* tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
  ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter
  ARM: dts: imx5: make src node name generic
  ARM: dts: imx50: Add src node interrupt
  ARM: dts: imx: make src node name generic
  ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio
  ARM: dts: imx6sl: Use nvmem interface to get fuse data
  ARM: dts: imx6qdl: Use nvmem interface to get fuse data
  ARM: dts: imx6qdl-gw5910: fix wlan regulator
  ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt
  ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support
  ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support
  ARM: dts: imx53: Add src node interrupt
  ARM: dts: imx51: Add src node interrupt
  ARM: dts: imx50: Remove unused iomuxc-gpr node
  ARM: dts: imx6qdl-gw552x: add USB OTG support
  ARM: dts: imx6-sr-som: add ethernet PHY configuration
  arm: dts: ls1021atwr: Add QSPI node properties
  ARM: dts: e60k02: add interrupt for PMIC
  ARM: dts: colibri: introduce device trees with UHS-I support
  ARM: dts: imx7d: Add cpu1 supply
  ...

Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX bindings change for 5.8:

- Add Kontron SMARC module compatibles to DT schema.
- Add Colibri iMX6S/DL V1.1x devicetree compatibles.

* tag 'imx-bindings-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: imx: add kontron smarc to schema
  dt-bindings: arm: fsl: add nxp based toradex colibri bindings

Link: https://lore.kernel.org/r/20200523032516.11016-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.8-rc1

This contains a couple of fixes for minor issues, enables XUDC support
on Tegra194, and enables EMC frequency scaling and video capture on
Tegra210.

* tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  arm64: tegra: Make the RTC a wakeup source on Jetson TX2
  arm64: tegra: Enable VI I2C on Jetson Nano
  arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
  arm64: tegra: Add Tegra VI CSI support in device tree
  arm64: tegra: Add reset-cells to memory controller
  arm64: tegra: Fix SOR powergate clocks and reset
  arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier
  arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
  arm64: tegra: Hook up EMC cooling device
  arm64: tegra: Add external memory controller node for Tegra210
  arm64: tegra: Add XUDC node on Tegra194
  arm64: tegra: Kill off "simple-panel" compatibles

Link: https://lore.kernel.org/r/20200522142846.2376224-3-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.8

Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
  (S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits)
  arm64: dts: meson-g12b-gtking-pro: add initial device-tree
  dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
  arm64: dts: meson-g12b-gtking: add initial device-tree
  dt-bindings: arm: amlogic: add support for the Beelink GT-King
  arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
  arm64: dts: meson: add ethernet interrupt to wetek dtsi
  arm64: dts: meson: add support for the Smartlabs SML-5442TW
  dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW
  dt-bindings: add vendor prefix for Smartlabs LLC
  arm64: dts: meson: g12: add internal DAC glue
  arm64: dts: meson: g12: add internal DAC
  arm64: dts: meson: libretech-pc: add internal DAC support
  arm64: dts: meson: libretech-ac: add internal DAC support
  arm64: dts: meson: libretech-cc: add internal DAC support
  arm64: dts: meson: p230-q200: add internal DAC support
  arm64: dts: meson: gxl: add acodec support
  arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
  dt-bindings: arm: amlogic: add odroid-c4 bindings
  arm64: dts: meson-sm1: add cpu thermal nodes
  arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
  ...

Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.8
- eth PHY and USB PHY updates

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
  ARM: dts: meson: Add the Ethernet "timing-adjustment" clock
  ARM: dts: meson8m2: Use the Meson8m2 specific USB2 PHY compatible
  ARM: dts: meson: add the gadget mode properties to the USB0 controller

Link: https://lore.kernel.org/r/5ec6f524.1c69fb81.b979a.ae15@mx.google.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson Nano and TX1, which is useful to wake the system from suspend
at a given time.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

These were queued for v5.7 as bugfixes, merge them
here as well to resolve the conflicts.

* mmp/fixes:
  ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
  ARM: dts: mmp3-dell-ariel: Fix the SPI devices
  ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.

Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I've managed to get about everything wrong while digging these out of
OEM's board file.

Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.

Tested that it works now, with a slight fix to the PXA SSP driver.

Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Clocks are in fact slightly different on MMP3. In particular, PLL2 is
fixed to a different frequency, there's an extra PLL3, and the GPU
clocks are configured differently.

Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There's one extra SDHCI on MMP3, used by the internal SD card on OLPC
XO-4. Add it to the device tree.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The node name preferred by mmc-controller.yaml binding spec is "mmc":

  berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0000: $nodename:0:
      'sdhci@ab0000' does not match '^mmc(@.*)?$'
  berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0800: $nodename:0:
      'sdhci@ab0800' does not match '^mmc(@.*)?$'
  berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab1000: $nodename:0:
      'sdhci@ab1000' does not match '^mmc(@.*)?$'
  berlin2cd-google-chromecast.dt.yaml: sdhci@ab0000: $nodename:0:
      'sdhci@ab0000' does not match '^mmc(@.*)?$'
  berlin2cd-valve-steamlink.dt.yaml: sdhci@ab0000: $nodename:0:
      'sdhci@ab0000' does not match '^mmc(@.*)?$'
  berlin2q-marvell-dmp.dt.yaml: sdhci@ab0000: $nodename:0:
      'sdhci@ab0000' does not match '^mmc(@.*)?$'
  berlin2q-marvell-dmp.dt.yaml: sdhci@ab0800: $nodename:0:
      'sdhci@ab0800' does not match '^mmc(@.*)?$'
  berlin2q-marvell-dmp.dt.yaml: sdhci@ab1000: $nodename:0:
      'sdhci@ab1000' does not match '^mmc(@.*)?$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are better generic ones and the validation is going to complain:

  mmp3-dell-ariel.dt.yaml: hsic@f0001000: $nodename:0: 'hsic@f0001000'
      does not match '^usb(@.*)?'
  mmp3-dell-ariel.dt.yaml: hsic@f0002000: $nodename:0: 'hsic@f0002000'
      does not match '^usb(@.*)?'
  ...
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The current one makes validation unhappy:

  mmp3-dell-ariel.dt.yaml: l2-cache-controller@d0020000: $nodename:0:
      'l2-cache-controller@d0020000' does not match
      '^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:

  mmp3-dell-ariel.dt.yaml: rtc@d4010000: interrupts: [[1, 0]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:

  pxa168-aspenite.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
  pxa910-dkb.dt.yaml: rtc@d4010000: interrupts: [[5, 6]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This way the device tree validator learns that each cell of the property
constitutes a separate item. Otherwise it gets unnecessairly upset:

  pxa300-raumfeld-speaker-s.dt.yaml: gpio@40e00000: interrupts:
      [[8, 9, 10]] is too short
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr.>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This makes the nodes compatible with the generic i2c binding without the
board DTS files having to supply the necessary properties themselves.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The current ones makes validation unhappy:

  dove-d3plug.dt.yaml: main-interrupt-ctrl@20200: $nodename:0:
      'main-interrupt-ctrl@20200' does not match
      '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The current ones makes validation unhappy:

  kirkwood-lsxhl.dt.yaml: main-interrupt-ctrl@20200: $nodename:0:
    'main-interrupt-ctrl@20200' does not match
    '^interrupt-controller(@[0-9a-f,]+)*$'
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

RGA node for rk322x, wifi node for rk3229-xms6 and some cleanups.

* tag 'v5.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rga node for rk322x
  ARM: dts: remove disable-wp from rk3229-xms6 emmc
  ARM: dts: enable WLAN for Mecer Xtreme Mini S6
  ARM: dts: rockchip: remove identical #include from rk3288.dtsi
  ARM: dts: rockchip: rename and label gpio-led subnodes

Link: https://lore.kernel.org/r/3735080.6Cexqc3t0Y@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New soc variant the rk3326 which is essentially a px30 with only one
display controller and a new board using it, the Odroid Advance Go.
sdcard regulator for the rockpro64 and a lot of devicetree fixes
making the dt-binding check a lot happier.

* tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
  arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2
  arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399
  arm64: dts: rockchip: add bus-width properties to mmc nodes for px30
  arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node
  arm64: dts: rockchip: rename and label gpio-led subnodes
  arm64: dts: rockchip: fix defines in pd_vio node for rk3399
  arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi
  arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi
  arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4
  arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4
  arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1
  arm64: dts: rockchip: fix phy nodename for rk3328
  include: dt-bindings: rockchip: remove unused defines
  arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2
  arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399
  arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts
  arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts
  arm64: dts: rockchip: add Odroid Advance Go
  dt-bindings: Add binding for Hardkernel Odroid Go Advance
  arm64: dts: rockchip: add core devicetree for rk3326
  ...

Link: https://lore.kernel.org/r/1970481.V9vR1fIhX2@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 5.8 (part 1)

Armada 3720 based SoC:

+ Fix PCIe support allowing to use Compex wifi cards

+ Turris MOX board:
  - fix SFP binding
  - forbid SDR104 on SDIO to pass electromagnetic interference certifications

+ uDPU board: add i2c recovery support

Armada 8040 based SoC: SolidRun 8040: update phy interface

* tag 'mvebu-dt64-5.8-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: armada-3720-turris-mox: fix SFP binding
  arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes
  arm64: dts: add uDPU i2c bus recovery
  arm64: dts: marvell: drop i2c timeout-ms property
  arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property
  arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property
  arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
  arm64: dts: update SolidRun Armada 8040 phy interface types

Link: https://lore.kernel.org/r/878shmeffd.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt for 5.8 (part 1)

Add LCP panel support on ReadyNAS NV+v2
Add new board: Check Point L-50, kirkwood based SoC router
Remove unused property 'timeout-ms' in i2c nodes

* tag 'mvebu-dt-5.8-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: ReadyNAS NV+v2: Add LCD panel
  ARM: dts: kirkwood: Add Check Point L-50 board
  ARM: dts: marvell: drop i2c timeout-ms property

Link: https://lore.kernel.org/r/87blmiefgw.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno/Vexpress/Fast Models updates for v5.8

Various miscellaneous device tree source fixes to make them fully
binding compliant. It includes fixing various device node names,
order of interrupt properties, compatible names, address and size
cell fields and their aligment with children nodes as well as
moving some fixed devices out of bus node.

* tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Fix SCPI shared mem node name
  arm64: dts: vexpress: Fix VExpress LED names
  arm64: dts: juno: Fix GPU interrupt order
  arm64: dts: fvp/juno: Fix bus node names
  arm64: dts: fvp: Fix SMMU DT node
  arm64: dts: fvp/juno: Fix serial node names
  arm64: dts: juno: Use proper DT node name for USB
  arm64: dts: fvp: Fix ITS node names and #msi-cells
  arm64: dts: fvp: Fix GIC child nodes
  arm64: dts: juno: Fix GIC child nodes
  arm64: dts: fvp: Fix GIC compatible names
  arm64: dts: juno: Fix mem-timer
  arm64: dts: juno: Move fixed devices out of bus node
  arm64: dts: fvp: Move fixed clocks out of bus node
  arm64: dts: vexpress: Move fixed devices out of bus node
  arm64: dts: fvp: Move fixed devices out of bus node
  arm64: dts: fvp/juno: Fix node address fields

Link: https://lore.kernel.org/r/20200519094702.GA32975@bogusSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM dts updates for v5.8

This adds SCM firmware node for IPQ806x and fixes the high resolution
timer for IPQ4019. Samsung Galaxy S5 gains regulators, eMMC and USB
support.

* tag 'qcom-dts-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-klte: Add max77826 pmic node
  ARM: dts: qcom: msm8974-klte: Add USB node
  ARM: dts: qcom: msm8974-klte: Add sdhci1 node
  ARM: dts: qcom: msm8974-klte: Add gpio-keys nodes
  ARM: dts: qcom: msm8974-klte: Remove inherited vreg_boost node
  ARM: dts: qcom: msm8974-klte: Add pma8084 regulator nodes
  ARM: dts: qcom: ipq4019: fix high resolution timer
  ARM: dts: qcom: add scm definition to ipq806x

Link: https://lore.kernel.org/r/20200519052538.1250076-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.8

For SDM845 this defines the IPA network accelerator and the CCI camera
control bus, it defines the required UFS reset and adds WiFi for the
Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251
camera nodes for DB845c.

For SC7180 it adds GPU support, defines the modem remoteproc, adds the
IPA network accelerator, Coresight and ETM support, adds cpuidle low
power states and updates the CPUs' compatible.

For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and
adds voltage corners, it defines the nodes for UFS PHY and controller
and finally corrects a typo in the PDC node to make SPMI functional.

For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control
interface bus is added and Coresight is disabled by default to match
some product configurations. The Samsung A3U gained display support and
Samsung A5U gained touchscreen support.

MSM8996 now property describes the power supply chain for the GPU, the
CCI camera control interface bus is added and the DB820c has the
regulators of the secondary PMIC defined.

For QCS404 USB PHYs and controllers are defined and wired up for the
EVB.

SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7
defined.

It also contains a number of changes throughout to improve DT binding
compliance.

* tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits)
  arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges
  arm64: dts: qcom: sc7180: add IPA information
  arm64: dts: qcom: sc7180: Fix ETMv4 power management patch
  arm64: dts: qcom: sc7180: Add A618 gpu dt blob
  dt-bindings: arm-smmu: Add sc7180 compatible string
  arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC
  arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc
  arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi
  arm64: dts: qcom: msm8916: move gpu opp table to gpu node
  arm64: dts: qcom: msm8916: avoid using _ in node names
  arm64: dts: qcom: c630: Specify UFS device reset
  arm64: dts: qcom: c630: Add WiFi node
  arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel
  arm64: dts: qcom: db820c: Fix invalid pm8994 supplies
  arm64: dts: qcom: db820c: Add pmi8994 RPM regulators
  arm64: dts: qcom: msm8916: Disable coresight by default
  arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area
  arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen
  arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator
  arm64: dts: qcom: msm8916: Add blsp_i2c5
  ...

Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.8

 - New board: Microchip SAMA5D2 Industrial Connectivity Platform
 - All SoCs are now converted to the new PMC device tree binding
 - sama5d2 flexcom nodes are now fully described in sama5d2.dtsi

* tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (35 commits)
  ARM: dts: at91: sama5d2_xplained: Add aliases for the dedicated I2C IPs
  ARM: dts: at91: Configure I2C SCL gpio as open drain
  ARM: dts: at91: sama5d2_xplained: Describe the flx0 I2C function
  ARM: dts: at91: sama5d2_ptc_ek: Add comments to describe the aliases
  ARM: dts: at91: sama5d2_xplained: Add alias for DBGU
  ARM: dts: at91: sama5d2: Add missing flexcom definitions
  ARM: dts: at91: sama5d2: Remove i2s and tcb aliases from SoC dtsi
  ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and I2C flx0 functions
  ARM: dts: at91: sama5d2: Add DMA bindings for the flx1 I2C function
  ARM: dts: at91: sama5d2: Add DMA bindings for the flx3 SPI function
  ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions
  ARM: dts: at91: sama5d2: Specify the FIFO size for the Flexcom UART
  ARM: dts: at91: sama5d2: Move flx0 definitions in the SoC dtsi
  ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi
  ARM: dts: at91: sama5d2: Move flx2 definitions in the SoC dtsi
  ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi
  ARM: dts: at91: sama5d2: Move flx4 definitions in the SoC dtsi
  ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions
  ARM: dts: at91: sama5d27_wlsom1: Add alias for i2c0
  ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP
  ...

Link: https://lore.kernel.org/r/20200518212844.GA26356@piout.netSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt64-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM64 SoC DT updates for v5.8

- add DMA controller nodes

- add Akebi96 board support

* tag 'uniphier-dt64-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: Add support for Akebi96
  dt-bindings: arm: Add Akebi96 board support
  arm64: dts: uniphier: add #address-cells and #size-cells to SPI nodes
  arm64: dts: uniphier: Stabilize Ethernet RGMII mode of PXs3 ref board
  arm64: dts: uniphier: Add ethernet aliases
  arm64: dts: uniphier: Add XDMAC node

Link: https://lore.kernel.org/r/CAK7LNARUL52pBhg8AD9XeScVqhD8qr2eVEfu4+1v8D+KPyOwNw@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM SoC DT updates for v5.8

- add DMA controller nodes

* tag 'uniphier-dt-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add #address-cells and #size-cells to SPI nodes
  ARM: dts: uniphier: Add ethernet aliases
  ARM: dts: uniphier: Add XDMAC node

Link: https://lore.kernel.org/r/CAK7LNAQXSpg4s0e0d-tp9j85Sj01t13zAa5+rqsOWu4ZvkpYhg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

MT2712:
- replace deprecated compatible for the usb PHY

MT6797:
- switch to SPDX identifier
- add and enable I2C device for x20 development board
- add I2C compatible to the binding description

MT7622:
- add Wi-Fi device and enable it for the Bananpi-R64

MT8173:
- add CPU capacities based on Dhryston benchmark
- fix DT build warnings
- set throtteling range to limitless
- add Elm and Hana devices on which several chromebooks are based
- add Global Command Queue entries to the users

MT8183:
- split cpuidle states in two as the clusters have different target residencies

* tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8173: Add capacity-dmips-mhz attributes
  arm64: dts: mt2712: use non-empty ranges for usb-phy
  arm64: dts: mt8173: fix mdp aliases property name
  arm64: dts: mediatek: Switch to SPDX license identifier for MT6797 SoC
  arm64: dts: mediatek: Enable I2C support for 96Boards X20 Development board
  arm64: dts: mediatek: Add I2C support for MT6797 SoC
  dt-bindings: i2c: Document I2C controller binding for MT6797 SoC
  arm64: dts: mt8173: fix cooling device range
  arm64: dts: mediatek: add mt8173 elm and hana board
  arm64: dts: mt8173: fix unit name warnings
  arm64: dts: mt8173: add uart aliases
  dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana
  arm64: dts: mt8183: adjust cpuidle target residency
  arm64: dts: mt8173: Add gce setting in mmsys and display node
  arm64: dts: mt7622: add built-in Wi-Fi device nodes

Link: https://lore.kernel.org/r/2794a8db-c14f-ac34-9e28-9f3700db6c4c@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS updates for the v5.8 kernel series:

- Add proximity sensor and magnetometer to the Samsung Golden
  devicetree.
- Add magnetometer and touchscreen to the Samsung Skomer
  devicetree.

* tag 'ux500-dts-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: Add touchscreen to the Skomer
  ARM: dts: ux500: samsung-skomer: Add magnetometer
  ARM: dts: ux500: samsung-golden: Add magnetometer
  ARM: dts: ux500: samsung-golden: Add proximity sensor

Link: https://lore.kernel.org/r/CACRpkdbukO33SxAZ_yn-1N8=hq3hF5OBOtP_V0fbjRT-fAa87A@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.7-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

MT2701:
- add MUSB device to the SoC and the EVB

MT7623:
- add Mali-450 device node and bindings
- add phy to gmac2

* tag 'v5.7-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mt2701: Add usb2 device nodes
  dt-bindings: gpu: mali-utgard: add mediatek, mt7623-mali compatible
  arm: dts: mt7623: add Mali-450 device node
  arm: dts: mt7623: add phy-mode property for gmac2

Link: https://lore.kernel.org/r/ec17cf62-5463-9537-6618-2db9b2b5036e@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.8
- Leave the FPGA bridges disabled in base dtsi
- Add fpga2hps and fpga2sdram bridges on base Cyclone5/Arria5 dtsi

* tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: Add fpga2hps and fpga2sdram bridges
  ARM: dts: socfgpa: set bridges status to disabled

Link: https://lore.kernel.org/r/20200515193029.11318-2-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual number of patches to improve the Allwinner Device Tree
support, including:
  - Support for the IOMMU on the H6
  - Support for cpufreq / thermal throttling on the H6
  - Support for the mailbox on the A64, A83t, H3, H5 and H6
  - New boards: A20-OLinuXino-LIME-eMMC

* tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits)
  arm64: dts: allwinner: h6: Add IOMMU
  arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6
  arm64: dts: allwinner: h6: add voltage range to OPP table
  arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells
  arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64
  arm64: dts: allwinner: Sort Pine H64 device-tree nodes
  arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
  arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1
  arm64: dts: allwinner: h6: Add CPU Operating Performance Points table
  arm64: dts: allwinner: h6: Add thermal trip points/cooling map
  arm64: dts: allwinner: h6: Add clock to CPU cores
  arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module
  arm64: dts: allwinner: h6: orangepi: Disable OTG mode
  arm64: dts: allwinner: h6: orangepi: Add gpio power supply
  ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
  arm64: dts: allwinner: h6: Add msgbox node
  arm64: dts: allwinner: a64: Add msgbox node
  ARM: dts: sunxi: h3/h5: Add msgbox node
  ARM: dts: sunxi: a83t: Add msgbox node
  ARM: dts: sun8i-h3: add opp table for mali gpu
  ...

Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.8-rc1

This contains a bit of cleanup and CPU frequency scaling support for the
Tegra30 Beaver board.

* tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: dts: tegra30: beaver: Add CPU Operating Performance Points
  ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
  ARM: tegra: Kill off "simple-panel" compatibles

Link: https://lore.kernel.org/r/20200515145311.1580134-11-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.8-rc1

This adds bindings for the CSI TPG clock on Tegra210, moves various
clocks from the clock and reset controller to the PMC where their
controls really are, adds bindings for the external memory controller
and video capture controller on Tegra210, as well as CPU frequency
scaling on Tegra20 and Tegra30.

* tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: i2c: tegra: Document Tegra210 VI I2C
  dt-bindings: tegra: Add VI and CSI bindings
  dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
  dt-bindings: memory: tegra: Add external memory controller binding for Tegra210
  dt-bindings: clock: tegra: Remove PMC clock IDs
  dt-bindings: clock: tegra: Add clock ID for CSI TPG clock

Link: https://lore.kernel.org/r/20200515145311.1580134-4-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-dt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC DT updates for v5.8

- Add DSS support for both AM65x and J721e
- Add watchdog support for J721e
- Add EHRPWM support for AM65x
- Add Thermal support for AM65x

* tag 'ti-k3-dt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-main: Add main domain watchdog entries
  arm64: dts: ti: k3-am65-main: Add ehrpwm nodes
  arm64: dts: ti: am654: Add thermal zones
  arm64: dts: ti: am65-wakeup: Add VTM node
  arm64: dts: ti: k3-j721e-common-proc-board: add assigned clks for DSS
  arm64: dts: ti: k3-j721e-main: Add DSS node
  arm64: dts: ti: am654: Add DSS node

Link: https://lore.kernel.org/r/7484d3c9-323f-36a3-f0df-1287586f356d@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>