- 07 May, 2019 1 commit
-
-
Kailang Yang authored
Enter to close more power control widgets at suspend. Remove hp_pin check. Add the default pin 0x21 as headphone. Supported low power consumption, it must do depop procedure when headset jack was plugged or unplugged. So, alc225_init() and alc225_shutup() must run delay when headset jack was plugged or unplugged. If depop procedure not run with delay, it will have a chance to let power consumption raise high. [ A few compile fixes by tiwai ] Fixes: 8983eb60 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 May, 2019 9 commits
-
-
Hui Wang authored
On the machines with AMD GPU or Nvidia GPU, we often meet this issue: after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting even there is no any monitors plugged. When this problem happens, we check the /proc/asound/cardX/eld#N.M, we will find the monitor_present=1, eld_valid=0. The root cause is BIOS or GPU driver makes the PRESENCE valid even no monitor plugged, and of course the driver will not get the valid eld_data subsequently. In this situation, we should not report the jack_plugged event, to do so, let us change the function hdmi_present_sense_via_verbs(). In this function, it reads the pin_sense via snd_hda_pin_sense(), after calling this function, the jack_dirty is 0, and before exiting via_verbs(), we change the shadow pin_sense according to both monitor_present and eld_valid, then in the snd_hda_jack_report_sync(), since the jack_dirty is still 0, it will report jack event according to this modified shadow pin_sense. After this change, the driver will not report Jack_is_plugged event through hdmi_present_sense_via_verbs() if monitor_present is 1 and eld_valid is 0. Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Hui Wang authored
The driver will check the monitor presence when resuming from suspend, starting poll or interrupt triggers. In these 3 situations, the jack_dirty will be set to 1 first, then the hda_jack.c reads the pin_sense from register, after reading the register, the jack_dirty will be set to 0. But hdmi_repoll_work() is enabled in these 3 situations, It will read the pin_sense a couple of times subsequently, since the jack_dirty is 0 now, It does not read the register anymore, instead it uses the shadow pin_sense which is read at the first time. It is meaningless to check the shadow pin_sense a couple of times, we need to read the register to check the real plugging state, so we set the jack_dirty to 1 in the hdmi_repoll_work(). Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.2 This is a pretty huge set of changes, it's been a pretty active release all round but the big thing with this release is the Sound Open Firmware changes from Intel, providing another DSP framework for use with the DSPs in their SoCs. This one works with the firmware of the same name which is free software (unlike the previous DSP firmwares and framework) and there has been some interest in adoption by other systems already so hopefully we will see adoption by other vendors in the future. Other highlights include: - Support for MCLK/sample rate ratio setting in the generic cards. - Support for pin switches in the generic cards. - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese McDermond. - New drivers for Freescale audio mixers, several Intel machines, several Mediatek machines, Meson G12A, Sound Open Firmware and Spreadtrum compressed audio and DMA devices.
-
Mark Brown authored
-
Mark Brown authored
-
Baolin Wang authored
For Spreadtrum audio platform driver, it need allocate a larger DMA buffer dynamically to copy audio data between userspace and kernel space, but that will increase the risk of memory allocation failure especially the system is under heavy load situation. To make sure the audio can work in this scenario, we usually reserve one region of memory to be used as a shared pool of DMA buffers for the platform component. So add of_reserved_mem_device_init_by_idx() function to initialize the shared pool of DMA buffers to be used by the platform component. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
This function is called from load_guspatch() and the rate is specified by the user. If they accidentally selected zero then it would crash the kernel. I've just changed the zero to a one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Linus Torvalds authored
-
- 05 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a kobject memory leak in the cpufreq code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpufreq: Fix kobject memleak
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Disable function tracing during early SME setup to fix a boot crash on SME-enabled kernels running distro kernels (some of which have function tracing enabled)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - a couple of ->i_link use-after-free fixes - regression fix for wrong errno on absent device name in mount(2) (this cycle stuff) - ancient UFS braino in large GID handling on Solaris UFS images (bogus cut'n'paste from large UID handling; wrong field checked to decide whether we should look at old (16bit) or new (32bit) field) * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour Abort file_remove_privs() for non-reg. files [fix] get rid of checking for absent device name in vfs_get_tree() apparmorfs: fix use-after-free on symlink traversal securityfs: fix use-after-free on symlink traversal
-
Jiri Olsa authored
New race in x86_pmu_stop() was introduced by replacing the atomic __test_and_clear_bit() of cpuc->active_mask by separate test_bit() and __clear_bit() calls in the following commit: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") The race causes panic for PEBS events with enabled callchains: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:perf_prepare_sample+0x8c/0x530 Call Trace: <NMI> perf_event_output_forward+0x2a/0x80 __perf_event_overflow+0x51/0xe0 handle_pmi_common+0x19e/0x240 intel_pmu_handle_irq+0xad/0x170 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x69/0x110 default_do_nmi+0x3e/0x100 do_nmi+0x11a/0x180 end_repeat_nmi+0x16/0x1a RIP: 0010:native_write_msr+0x6/0x20 ... </NMI> intel_pmu_disable_event+0x98/0xf0 x86_pmu_stop+0x6e/0xb0 x86_pmu_del+0x46/0x140 event_sched_out.isra.97+0x7e/0x160 ... The event is configured to make samples from PEBS drain code, but when it's disabled, we'll go through NMI path instead, where data->callchain will not get allocated and we'll crash: x86_pmu_stop test_bit(hwc->idx, cpuc->active_mask) intel_pmu_disable_event(event) { ... intel_pmu_pebs_disable(event); ... EVENT OVERFLOW -> <NMI> intel_pmu_handle_irq handle_pmi_common TEST PASSES -> test_bit(bit, cpuc->active_mask)) perf_event_overflow perf_prepare_sample { ... if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) data->callchain = perf_callchain(event, regs); CRASH -> size += data->callchain->nr; } </NMI> ... x86_pmu_disable_event(event) } __clear_bit(hwc->idx, cpuc->active_mask); Fixing this by disabling the event itself before setting off the PEBS bit. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Arcari <darcari@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Lendacky Thomas <Thomas.Lendacky@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 04 May, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One regression fix. Changes we merged to STRICT_KERNEL_RWX on 32-bit were causing crashes under load on some machines depending on memory layout. Thanks to Christophe Leroy" * tag 'powerpc-5.1-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWX
-
- 03 May, 2019 24 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
-
Linus Torvalds authored
Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fix from Dave Airlie: "Just a single qxl revert" * tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm: Revert "drm/qxl: drop prime import/export callbacks"
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for clkdev where we forgot to hold a lock while iterating a list that can change, and finally a build fix that adds some stubs for clk APIs that are used by devfreq drivers on platforms without the clk APIs" * tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Add missing stubs for a few functions clkdev: Hold clocks_mutex while iterating clocks list clk: sunxi-ng: nkmp: Explain why zero width check is needed clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few stable fixes at this round. The USB Line6 audio fixes are a bit large, but they are rather trivial and pretty much device-specific, so should be safe to apply at this late stage. Ditto for other HD-audio quirks" * tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR ALSA: line6: use dynamic buffers ALSA: hda/realtek - Fixed Dell AIO speaker noise ALSA: hda/realtek - Add new Dell platform for headset mode
-
Ross Zwisler authored
Several sound related entries in MAINTAINERS refer to the old git tree at "git://git.alsa-project.org/alsa-kernel.git". This is no longer used for development, and Takashi Iwai's kernel.org tree is used instead. Signed-off-by: Ross Zwisler <zwisler@google.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Alexander Shishkin authored
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Alexander Shishkin authored
This recent commit: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Mac Chiang authored
On kbl_rt5663_max98927, commit 38a5882e ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE") This key pair mapping to play/pause when playing Youtube The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec The same fix is required on Chrome kbl_da7219_max98357a. Signed-off-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Bard liao authored
The machine driver is a generic machine driver for SOF with rt5682 codec. it currently supports BYT/CHT/ICL/CML. Depending on the SOC hdmi/speaker and DMIC support are added dynamically. Only add information related to SOF since the machine driver was only tested with SOF. Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
Semicolon is better than comma. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
Add dmic dai links using naming conventions used in previous machine drivers. Tested on whiskylake & icelake with SOF driver. Due to a missing topology file, the DMIC functionality could not be tested with the Skylake driver but was tested for non-regressions on a GeminiLake platform without DMICs. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pan Xiuli authored
Add ipc dump function to CNL+ platforms. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pan Xiuli authored
Add IPC dump function for APL plaform Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pan Xiuli authored
Dump IPC status when IPC timed out. IPC status is platform specific and need bind to plaform. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ranjani Sridharan authored
The prepare() ioctl for BE dai link gets called both when the stream is started and when it is resumed from suspend. SOF uses this ioctl to set the hw params again only if the stream has been suspended. When the stream is started, the hw_params ioctl gets called before prepare() and hw_params is set for the BE dai link. So the prepare call does not need to do anything further. When the stream resumes after system suspend, SOF requires that the hw_params be set again for the BE dai. In order to determine which streams should set the hw params during prepare(), an internal flag called "hw_params_upon_resume" is introduced in struct sof_intel_hda_stream. The flag is set for hda streams when the sof device suspends and is cleared after hw_params is set. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
The stream and IPC share the same interrupt. The stream interrupt handler mistakenly uses the ipc interrupt and return IRQ_HANDLED, causing the ipc interrupt to be missed. Make sure the stream interrupt handler only deals with stream-related interrupts. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Add stream_max into struct sof_intel_hda_dev to store the total hda stream number that the platform can support, and initialize it at stream_init. This can be used later e.g. for stream bitmask. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
When using a shared IRQ between IPC interrupt and stream IOC interrupt, the interrupt handlers need to check the interrupt source before scheduling their respective IRQ threads. In the case of IPC handler, it should check if it is an IPC interrupt before waking up the IPC IRQ thread. The IPC IRQ thread, once scheduled, does not need to check the IRQ source again. So, remove the superfluous check in the thread. Remove the irq_status field from snd_sof_dev struct also as it is no longer needed. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Switch to a wrapper function which schedules the actual call of snd_pcm_period_elapsed after the current IPC is completed. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Switch to a wrapper function which schedules the actual call of snd_pcm_period_elapsed after the current IPC is completed. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
The IPC implementation in SOF requires sending IPCs serially: we should not send a new IPC command to the firmware before we get an ACK (or time out) from firmware, and the IRQ processing is complete. snd_pcm_period_elapsed() can be called in interrupt context before IRQ_HANDLED is returned. When the PCM is done draining, a STOP IPC will then be sent, which breaks the expectation that IPCs are handled serially and leads to IPC timeouts. This patch adds a workqueue to defer the call to snd_pcm_elapsed() after the IRQ is handled. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Nothing depends on definitions in hdaudio_ext.h, don't include it Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Zhu Yingjiang authored
Setting the bus->idx as 0, for we only have one HDA bus atm. This need to be fixed when there are more than one HDA bus. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-