- 09 Nov, 2015 26 commits
-
-
David Henningsson authored
commit e8d65a8d upstream. Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1504778Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vinod Koul authored
commit 42f2bb1c upstream. Compiling the hdac extended core on arm fails with below error: sound/hda/ext/hdac_ext_bus.c: In function 'hdac_ext_writel': >> sound/hda/ext/hdac_ext_bus.c:29:2: error: implicit declaration of >> function +'writel' [-Werror=implicit-function-declaration] writel(value, addr); ^ sound/hda/ext/hdac_ext_bus.c: In function 'hdac_ext_readl': >> sound/hda/ext/hdac_ext_bus.c:34:2: error: implicit declaration of >> function +'readl' [-Werror=implicit-function-declaration] return readl(addr); This is fixed by explicitly including io.h Fixes: 99463b3a - ('ALSA: hda: provide default bus io ops extended hdac') Reported-by:
kbuild test robot <lkp@intel.com> Suggested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4a5d69b7 upstream. The vgic code on ARM is built for all configurations that enable KVM, but the parent_data field that it references is only present when CONFIG_IRQ_DOMAIN_HIERARCHY is set: virt/kvm/arm/vgic.c: In function 'kvm_vgic_map_phys_irq': virt/kvm/arm/vgic.c:1781:13: error: 'struct irq_data' has no member named 'parent_data' This flag is implied by the GIC driver, and indeed the VGIC code only makes sense if a GIC is present. This changes the CONFIG_KVM symbol to always select GIC, which avoids the issue. Fixes: 662d9715 ("arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Antti Palosaari authored
commit d18ca5b7 upstream. Add lock to prevent concurrent access for control message as control message function uses shared buffer. Without the lock there may be remote control polling which messes the buffer causing IO errors. Increase buffer size and add check for maximum supported message length. Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391 Fixes: c56222a6 ("[media] rtl28xxu: move usb buffers to state") Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Laura Abbott authored
commit 47810b43 upstream. When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format: si2168 11-0064: found a 'Silicon Labs Si2168-B40' si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 11-0064: firmware download failed -95 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f Add the proper check. Reported-by:
Stuart Auchterlonie <sauchter@redhat.com> Reviewed-by:
Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Laura Abbott authored
commit a828d72d upstream. When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format. Add the proper check. Signed-off-by:
-
Antti Palosaari authored
commit 56ea37da upstream. Device stopped to tuning some channels after regmap conversion. Reason is that regmap_update_bits() works a bit differently for partially volatile registers than old homemade routine. Return back to old routine in order to fix issue. Fixes: 478932b1Reported-by:
Mark Clarkstone <hello@markclarkstone.co.uk> Tested-by:
-
Dan Carpenter authored
commit 9ac0934b upstream. The size here comes from the user via the ioctl, it is a number between 1-u32max so the addition here could overflow on 32 bit systems. Fixes: f453ba04 ('DRM: add mode setting support') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Maneet Singh authored
commit 8731b269 upstream. Arguments passed to list_add_tail were reversed resulting in deletion of old blob property everytime the new one is added. Fixes commit e2f5d2ea Author: Daniel Stone <daniels@collabora.com> Date: Fri May 22 13:34:51 2015 +0100 drm/mode: Add user blob-creation ioctl Signed-off-by:
Maneet Singh <mmaneetsingh@nvidia.com> [seanpaul tweaked commit subject a little] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Adam Richter authored
commit 30730c7f upstream. In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device that returns without releasing mgr->lock, resulting a spew of kernel messages about a kernel work function possibly having leaked a mutex and presumably more serious adverse consequences later. This patch changes the error to "goto out" to unlock the mutex before returning. [airlied: grabbed from drm-next as it fixes something we've seen] Signed-off-by:
Adam J. Richter <adam_richter2004@yahoo.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Vasant Hegde authored
commit 8832317f upstream. Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Fixes: 55190f88 ("powerpc: Add skeleton PowerNV platform") Reported-by:
NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jay Cornwall authored
commit d14f6fce upstream. handle_mm_fault indirectly triggers a BUG in do_numa_page when given a VMA without read/write/execute access. Check this condition in do_fault. do_fault -> handle_mm_fault -> handle_pte_fault -> do_numa_page mm/memory.c 3147 static int do_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, .... 3159 /* A PROT_NONE fault should not end up here */ 3160 BUG_ON(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))); Signed-off-by:
Jay Cornwall <jay@jcornwall.me> Signed-off-by:
-
Christian Zander authored
commit ba2374fd upstream. In preparation for the installation of a large page, any small page tables that may still exist in the target IOV address range are removed. However, if a scatter/gather list entry is large enough to fit more than one large page, the address space for any subsequent large pages is not cleared of conflicting small page tables. This can cause legitimate mapping requests to fail with errors of the form below, potentially followed by a series of IOMMU faults: ERROR: DMA PTE for vPFN 0xfde00 already set (to 7f83a4003 not 7e9e00083) In this example, a 4MiB scatter/gather list entry resulted in the successful installation of a large page @ vPFN 0xfdc00, followed by a failed attempt to install another large page @ vPFN 0xfde00, due to the presence of a pointer to a small page table @ 0x7f83a4000. To address this problem, compute the number of large pages that fit into a given scatter/gather list entry, and use it to derive the last vPFN covered by the large page(s). Signed-off-by:
Christian Zander <christian@nervanasys.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Luca Coelho authored
commit f08f6258 upstream. Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B device ID. Reported-by:
Jeremy <jeremy.bomkamp@gmail.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Andrei Otcheretianski authored
commit dbf73d4a upstream. FW dump may be triggered when running init ucode, for example due to a sysassert. In this case fw_dump_wk may run after mvm is freed, resulting in a kernel panic. Fix it by flushing the work. Fixes: 01b988a708af ("iwlwifi: mvm: allow to collect debug data when restart is disabled") Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
-
Arik Nemtsov authored
commit 1a3fe0b2 upstream. During the CT-kill exit flow, the card is powered up and partially initialized to check if the temperature is already low enough. Unfortunately the init bails early because the CT-kill flag is set. Make the code bail early only for HW RF-kill, as was intended by the author. CT-kill is self-imposed and is not really RF-kill. Fixes: 31b8b343 ("iwlwifi: fix RFkill while calibrating") Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2cf5eb3a upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 6645d5e4 upstream. When going into/coming out of D3, the TX PN must be programmed into and restored from the firmware respectively. The restore was broken due to my previous commit to move PN assignment into the driver. Sending the PN to the firmware still worked since we now use the counter that's shared with mac80211, but accessing it through the mac80211 API makes no sense now. Fix this by reading/writing the counter directly. This actually simplifies the code since we don't need to round-trip through the key_seq structure. Fixes: ca8c0f4b ("iwlwifi: mvm: move TX PN assignment for CCMP to the driver") Reported-by:
-
Avraham Stern authored
commit e9cb0327 upstream. The csa_countdown flag was not cleared when the AP is stopped. As a result, if the AP was stopped after csa_countdown had started, all the folowing channel switch commands would fail. Fix that by clearing the csa_countdown flag when the AP is stopped. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Larry Finger authored
commit 54328e64 upstream. In commit 1277fa2a ("rtlwifi: Remove the clear interrupt routine from all drivers"), the code that cleared all interrupt enable bits before setting them was removed for all PCI drivers. This fixed an issue that caused TX to be blocked for 3-5 seconds. On some RTL8821AE units, this change causes soft lockups to occur on boot. For that reason, the portion of the earlier commit that applied to rtl8821ae is reverted. Kernels 4.1 and newer are affected. See http://marc.info/?l=linux-wireless&m=144373370103285&w=2 and https://bugzilla.opensuse.org/show_bug.cgi?id=944978 for two cases where this regression affected user systems. Note that this bug does not appear on any of the developer's setups. For those users whose systems are affected by the TX blockage, but do not lock up on boot, a module parameter is added to disable the interrupt clear Fixes: 1277fa2a ("rtlwifi: Remove the clear interrupt routine from all drivers") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Berg authored
commit b5a48134 upstream. The MODULE_FIRMWARE() for 3160 should be using the 7260 version as it's done in the device configuration struct instead of referencing IWL3160_UCODE_API_OK which doesn't even exist. Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Johannes Berg authored
commit 5bd16687 upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
Chaotian Jing authored
commit 08b137d9 upstream. Suppose that we got a data crc error, and it triggers the mmc_reset. mmc_reset will call mmc_send_status to see if HW reset was supported. before issue CMD13, it will do retune, and if EMMC was in HS400 mode, it will reduce frequency to 52Mhz firstly, then results in card init was doing at 52Mhz. The mmc_send_status was originally only done for mmc_test, should drop it. And, rename the "eMMC hardware reset" to "Reset test", as we would also be able to use the test for SD-cards. Signed-off-by:
Chaotian Jing <chaotian.jing@mediatek.com> Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: bd11e8bd ("mmc: core: Flag re-tuning is needed on CRC errors") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Felix Fietkau authored
commit 029cd037 upstream. ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
commit 4633dfc3 upstream. Commit 30686bf7 ("mac80211: convert HW flags to unsigned long bitmap") accidentally removed the newline delimiter from the hwflags debugfs file. Fix this by adding back the newline between the HW flags. Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> [fix commit log] Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
- 27 Oct, 2015 14 commits
-
-
Greg Kroah-Hartman authored
-
Steve Wise authored
commit c91aed98 upstream. The server rdma_read_chunk_lcl() and rdma_read_chunk_frmr() functions were not taking into account the initial page_offset when determining the rdma read length. This resulted in a read who's starting address and length exceeded the base/bounds of the frmr. The server gets an async error from the rdma device and kills the connection, and the client then reconnects and resends. This repeats indefinitely, and the application hangs. Most work loads don't tickle this bug apparently, but one test hit it every time: building the linux kernel on a 16 core node with 'make -j 16 O=/mnt/0' where /mnt/0 is a ramdisk mounted via NFSRDMA. This bug seems to only be tripped with devices having small fastreg page list depths. I didn't see it with mlx4, for instance. Fixes: 0bf48289 ('svcrdma: refactor marshalling logic') Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Tested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Steve Capper authored
commit 1a541b4e upstream. 6910fa16 ("arm64: enable PTE type bit in the mask for pte_modify") fixes a problem whereby a large block of PROT_NONE mapped memory is incorrectly mapped as block descriptors when mprotect is called. Unfortunately, a subtle bug was introduced by this fix to the THP logic. If one mmaps a large block of memory, then faults it such that it is collapsed into THPs; resulting calls to mprotect on this area of memory will lead to incorrect table descriptors being written instead of block descriptors. This is because pmd_modify calls pte_modify which is now allowed to modify the type of the page table entry. This patch reverts commit 6910fa16, and fixes the problem it was trying to address by adjusting PAGE_NONE to represent a table entry. Thus no change in pte type is required when moving from PROT_NONE to a different protection. Fixes: 6910fa16 ("arm64: enable PTE type bit in the mask for pte_modify") Cc: <stable@vger.kernel.org> # 4.0+ Cc: Feng Kan <fkan@apm.com> Reported-by:
Ganapatrao Kulkarni <Ganapatrao.Kulkarni@caviumnetworks.com> Tested-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> [SteveC: backported 1a541b4e to 4.1 and 4.2 stable. Just one minor fix to second part to allow patch to apply cleanly, no logic changed.] Signed-off-by:
Steve Capper <steve.capper@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
commit 9911a2d5 upstream. The code in pinctrl-imx.c only works correctly if in the imx_pinctrl_soc_info passed to imx_pinctrl_probe we have: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i (which conf_reg(pin) being the offset of the pin's configuration register). When the imx25 specific part was introduced in b4a87c9b ("pinctrl: pinctrl-imx: add imx25 pinctrl driver") we had: info->pins[i].number = i + 1 conf_reg(info->pins[i]) = 4 * i . Commit 34027ca2 ("pinctrl: imx25: fix numbering for pins") tried to fix that but made the situation: info->pins[i-1].number = i conf_reg(info->pins[i-1]) = 4 * i which is hardly better but fixed the error seen back then. So insert another reserved entry in the array to finally yield: info->pins[i].number = i conf_reg(info->pins[i]) = 4 * i Fixes: 34027ca2 ("pinctrl: imx25: fix numbering for pins") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Gleixner authored
commit 56fd16ca upstream. timekeeping_init() can set the wall time offset, so we need to increment the clock_was_set_seq counter. That way hrtimers will pick up the early offset immediately. Otherwise on a machine which does not set wall time later in the boot process the hrtimer offset is stale at 0 and wall time timers are going to expire with a delay of 45 years. Fixes: 868a3e91 "hrtimer: Make offset update smarter" Reported-and-tested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Stefan Liebler <stli@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Ilya Dryomov authored
commit 3ebe138a upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Mike Snitzer authored
commit ba30670f upstream. Fixes: ac8c3f3d ("dm thin: generate event when metadata threshold passed") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Michel Dänzer authored
commit f6c7aba4 upstream. This fixes flickering issues caused by prematurely firing pflip interrupts. v2 (chk): add commit message, fix DCE V10/V11 and DM as well v3: Re-enable pflip interrupt wherever we re-enable a CRTC v4: Enable pflip interrupt in DAL as well v5: drop DAL changes for upstream v6: (agd): only enable interrupts on crtcs that exist v7: (agd): integrate suggestions from Michel Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit e79d5c08 upstream. Make sure we are not the root device before attempting to read the pcie bridge registers to check the pcie gen speeed. Fixes a crash when the device is passed through to a VM. Reviewed-by:
-
Alex Deucher authored
commit 26d0c21d upstream. Hw only has 3 crtcs. copy paste typo. Signed-off-by:
-
Alex Deucher authored
commit fa022a9b upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by:
-
Alex Deucher authored
commit 51a4726b upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by:
-
Dave Airlie authored
commit bc8c131c upstream. This allows tiled monitors to work with radeon once mst is enabled. Signed-off-by:
-
Dave Airlie authored
commit ae491542 upstream. This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Reviewed-by:
-
