- 13 Dec, 2019 40 commits
-
-
David Miller authored
[ Upstream commit c44768a3 ] On T4 and later sparc64 cpus we can use the fused compare and branch instruction. However, it can only be used if the branch destination is in the range of a signed 10-bit immediate offset. This amounts to 1024 instructions forwards or backwards. After the commit referenced in the Fixes: tag, the largest possible size program seen by the JIT explodes by a significant factor. As a result of this convergance takes many more passes since the expanded "BPF_LDX | BPF_MSH | BPF_B" code sequence, for example, contains several embedded branch on condition instructions. On each pass, as suddenly new fused compare and branch instances become valid, this makes thousands more in range for the next pass. And so on and so forth. This is most greatly exemplified by "BPF_MAXINSNS: exec all MSH" which takes 35 passes to converge, and shrinks the image by about 64K. To decrease the cost of this number of convergance passes, do the convergance pass before we have the program image allocated, just like other JITs (such as x86) do. Fixes: e0cea7ce ("bpf: implement ld_abs/ld_ind in native bpf") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sahitya Tummala authored
[ Upstream commit 08ac9a38 ] Allow node type segments also to be GC'd via f2fs ioctl F2FS_IOC_GARBAGE_COLLECT_RANGE. Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Otavio Salvador authored
[ Upstream commit efc2e0bd ] It is not correct to assign the 24MHz clock oscillator to the GPIO ports. Fix it by assigning the proper GPIO clocks instead. Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Tested-by:
Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Otavio Salvador authored
[ Upstream commit c955b7ae ] According to the Rockchip vendor tree the PMU interrupt number is 76, so fix it accordingly. Signed-off-by:
-
Yunlong Song authored
[ Upstream commit 67b0e42b ] f2fs_ioc_gc_range skips blocks_per_seg each time, however, f2fs_gc moves blocks of section each time, so fix it from segment to section. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
-
Yunlong Song authored
[ Upstream commit d6c66cd1 ] When sbi->segs_per_sec > 1, and if some segno has 0 valid blocks before gc starts, do_garbage_collect will skip counting seg_freed++, and this will cause seg_freed < sbi->segs_per_sec and finally skip sec_freed++. Signed-off-by:
-
Chao Yu authored
[ Upstream commit a8075dc4 ] Previously, we only account preflush command for flush_merge mode, so for noflush_merge mode, we can not know in-flight preflush command count, fix it. Signed-off-by:
-
Alexey Dobriyan authored
[ Upstream commit f8c6d140 ] acpi_find_child_device() accepts boolean not pointer as last argument. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> [ rjw: Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Brian Norris authored
[ Upstream commit 408d3ba0 ] It's not very useful to repeat a bunch of probe deferral errors. And it's also not very useful to log "failed" without telling the error code. Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit 0d36dede ] Highspeed device and below has different state names than superspeed and higher. Add proper checks and printouts of link states for highspeed and below. Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit eafcd8e3 ] Current core-pkey selftest fails if the test runs without privileges to write into the core pattern file (/proc/sys/kernel/core_pattern). This causes the test to fail and give the impression that the subsystem being tested is broken, when, in fact, the test is being executed without the proper privileges. This is the current error: test: core_pkey tags: git_version:v4.19-3-g9e3363be9bce-dirty Error writing to core_pattern file: Permission denied failure: core_pkey This patch simply skips this test if it runs without the proper privileges, avoiding this undesired failure. CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> CC: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 5249497a ] Some ptrace selftests are passing input operands using a constraint that can allocate any register for the operand, and using these registers on load/store operations. If the register allocated by the compiler happens to be zero (r0), it might cause an invalid memory address access, since load and store operations consider the content of 0x0 address if the base register is r0, instead of the content of the r0 register. For example: r1 := 0xdeadbeef r0 := 0xdeadbeef ld r2, 0(1) /* will load into r2 the content of r1 address */ ld r2, 0(0) /* will load into r2 the content of 0x0 */ In order to avoid this possible problem, the inline assembly constraint should be aware that these registers will be used as a base register, thus, r0 should not be allocated. Other than that, this patch removes inline assembly operands that are not used by the tests. Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 3c18aa14 ] Currently dev is dereferenced by the call dev_net(dev) before dev is null checked. Fix this by null checking dev before the potential null pointer dereference. Detected by CoverityScan, CID#1462955 ("Dereference before null check") Fixes: 23790ef1 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Christian Lamparter authored
[ Upstream commit 7b0c03ec ] This patch adds a new device-tree property that allows to specify the dma protection control bits for the all of the DMA controller's channel uniformly. Setting the "correct" bits can have a huge impact on the PPC460EX and APM82181 that use this DMA engine in combination with a DesignWare' SATA-II core (sata_dwc_460ex driver). In the OpenWrt Forum, the user takimata reported that: |It seems your patch unleashed the full power of the SATA port. |Where I was previously hitting a really hard limit at around |82 MB/s for reading and 27 MB/s for writing, I am now getting this: | |root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 13.65s |user 0m 0.01s |sys 0m 11.89s | |root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 8.41s |user 0m 0.01s |sys 0m 4.70s | |This means: 121 MB/s reading and 75 MB/s writing! | |The drive is a WD Green WD10EARX taken from an older MBL Single. |I repeated the test a few times with even larger files to rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Another user And.short reported: |I can report that your fix worked! Boots up fine with two |drives even with more partitions, and no more reboot on |concurrent disk access! A closer look into the sata_dwc_460ex code revealed that the driver did initally set the correct protection control bits. However, this feature was lost when the sata_dwc_460ex driver was converted to the generic DMA driver framework. BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55 BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50 Fixes: 8b344485 ("sata_dwc_460ex: move to generic DMA driver") Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vinod Koul authored
commit 35faaf0d upstream. Commit 627469e4 ("dmaengine: coh901318: Fix a double-lock bug") left flags variable unused, so remove it to fix the warning. drivers/dma/coh901318.c: In function 'coh901318_config': drivers/dma/coh901318.c:1805:16: warning: unused variable 'flags' [-Wunused-variable] unsigned long flags; ^~~~~ Fixes: 627469e4 ("dmaengine: coh901318: Fix a double-lock bug") Reported-By:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jia-Ju Bai authored
[ Upstream commit 627469e4 ] The function coh901318_alloc_chan_resources() calls spin_lock_irqsave() before calling coh901318_config(). But coh901318_config() calls spin_lock_irqsave() again in its definition, which may cause a double-lock bug. Because coh901318_config() is only called by coh901318_alloc_chan_resources(), the bug fix is to remove the calls to spin-lock and -unlock functions in coh901318_config(). Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 896585d4 ] When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by:
Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Magnus Damm authored
[ Upstream commit 08b43857 ] Since only full-duplex operation is supported by the hardware, remove duplex handling code and keep the register setting of ECMR.DM fixed at 1. This updates the driver implementation to follow the data sheet text "This bit should always be set to 1." Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Luca Coelho authored
[ Upstream commit b1bbc1a6 ] We have to choose different configuration and different firmwares depending on the external RF module that is installed. Since the external module is not represented in the PCI IDs, we need to change the configuration at runtime, after checking the RF ID of the module installed. We have a bit of a mess in the code that does this, because it applies cfg's according to the RF ID only, ignoring the integrated module that is in use. Fix that for some devices by adding correct configurations for them and not ignoring the integrated module's type when making the decision. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 7f02ac77 ] The CEC specification requires that the Vendor ID (if any) is reported after a logical address was claimed. This was never done, so add support for this. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 2e84eb9a ] Return 0 when invalidating the logical address. The cec core produces a warning for drivers that do this. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reported-by:
Torbjorn Jansson <torbjorn.jansson@mbox200.swipnet.se> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit 649cfc2b ] The ffz() return value is undefined if the instance mask does not contain any zeros. If it returned 32, the following set_bit would corrupt the debugfs_root pointer. Switch to IDA for context index allocation. This also removes the artificial 32 instance limit for all except CodaDx6. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 6035cbcc ] DWC2 hardware module integrated in Samsung SoCs requires some quirks to operate properly, so use Samsung SoC specific compatible to notify driver to apply respective fixes. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit 73852e56 ] The abracon,tc-resistor property value is in kOhm. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 41ef3878 ] In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Propagate the error code instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Nylon Chen authored
[ Upstream commit a5234068 ] The hwcap_str should be set in a correct order according to HWCAP_xx. We also add the missing "fpu_dp" to it. Signed-off-by:
Nylon Chen <nylon7@andestech.com> Acked-by:
Greentime Hu <greentime@andestech.com> Signed-off-by:
-
Vincent Chen authored
[ Upstream commit 83312f1b ] _FP_ROUND_ZERO is defined as 0 and used as a statemente in macro _FP_ROUND. This generates "error: statement with no effect [-Werror=unused-value]" from gcc. Defining _FP_ROUND_ZERO as (void)0 to fix it. This modification is quoted from glibc 'commit <In libc/:> (8ed1e7d5894000c155acbd06f)' Signed-off-by:
Vincent Chen <vincentc@andestech.com> Acked-by:
-
Ursula Braun authored
[ Upstream commit e438bae4 ] In smc_wr_tx_put_slot() field pend->idx is used after being cleared. That means always idx 0 is cleared in the wr_tx_mask. This results in a broken administration of available WR send payload buffers. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 2cf1c893 ] Use correct type for fdt_property nameoff field. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21204/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Steve Wise authored
[ Upstream commit 9828ca65 ] Only retry connection setup with MPAv1 if the peer actually aborted the connection upon receiving the MPAv2 start message. This avoids retrying with MPAv1 in the case where the connection was aborted due to retransmit timeouts. Fixes: d2fe99e8 ("RDMA/cxgb4: Add support for MPAv2 Enhanced RDMA Negotiation") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 8c110d43 ] When we read the EOF page of the file via readpages, we need to zero the region beyond EOF that we either do not read or should not contain data so that mmap does not expose stale data to user applications. However, iomap_adjust_read_range() fails to detect EOF correctly, and so fsx on 1k block size filesystems fails very quickly with mapreads exposing data beyond EOF. There are two problems here. Firstly, when calculating the end block of the EOF byte, we have to round the size by one to avoid a block aligned EOF from reporting a block too large. i.e. a size of 1024 bytes is 1 block, which in index terms is block 0. Therefore we have to calculate the end block from (isize - 1), not isize. The second bug is determining if the current page spans EOF, and so whether we need split it into two half, one for the IO, and the other for zeroing. Unfortunately, the code that checks whether we should split the block doesn't actually check if we span EOF, it just checks if the read spans the /offset in the page/ that EOF sits on. So it splits every read into two if EOF is not page aligned, regardless of whether we are reading the EOF block or not. Hence we need to restrict the "does the read span EOF" check to just the page that spans EOF, not every page we read. This patch results in correct EOF detection through readpages: xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24 xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4 iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864 xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864 iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864 As you can see, it now does full page reads until the last one which is split correctly at the block aligned EOF, reading 3072 bytes and zeroing the last 1024 bytes. The original version of the patch got this right, but it got another case wrong. The EOF detection crossing really needs to the the original length as plen, while it starts at the end of the block, will be shortened as up-to-date blocks are found on the page. This means "orig_pos + plen" no longer points to the end of the page, and so will not correctly detect EOF crossing. Hence we have to use the length passed in to detect this partial page case: xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0 xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1 xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4 iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296 xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1 iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296 Heere we see a trace where the first block on the EOF page is up to date, hence poff = 1024 bytes. The offset into the page of EOF is 3072, so the range we want to read is 1024 - 3071, and the range we want to zero is 3072 - 4095. You can see this is split correctly now. This fixes the stale data beyond EOF problem that fsx quickly uncovers on 1k block size filesystems. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 4721a601 ] When doing direct IO to a pipe for do_splice_direct(), then pipe is trivial to fill up and overflow as it can only hold 16 pages. At this point bio_iov_iter_get_pages() then returns -EFAULT, and we abort the IO submission process. Unfortunately, iomap_dio_rw() propagates the error back up the stack. The error is converted from the EFAULT to EAGAIN in generic_file_splice_read() to tell the splice layers that the pipe is full. do_splice_direct() completely fails to handle EAGAIN errors (it aborts on error) and returns EAGAIN to the caller. copy_file_write() then completely fails to handle EAGAIN as well, and so returns EAGAIN to userspace, having failed to copy the data it was asked to. Avoid this whole steaming pile of fail by having iomap_dio_rw() silently swallow EFAULT errors and so do short reads. To make matters worse, iomap_dio_actor() has a stale data exposure bug bio_iov_iter_get_pages() fails - it does not zero the tail block that it may have been left uncovered by partial IO. Fix the error handling case to drop to the sub-block zeroing rather than immmediately returning the -EFAULT error. Signed-off-by:
-
Dave Chinner authored
[ Upstream commit b450672f ] If we are doing sub-block dio that extends EOF, we need to zero the unused tail of the block to initialise the data in it it. If we do not zero the tail of the block, then an immediate mmap read of the EOF block will expose stale data beyond EOF to userspace. Found with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations. Fix this by detecting if the end of the DIO write is beyond EOF and zeroing the tail if necessary. Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 0929d858 ] When we write into an unwritten extent via direct IO, we dirty metadata on IO completion to convert the unwritten extent to written. However, when we do the FUA optimisation checks, the inode may be clean and so we issue a FUA write into the unwritten extent. This means we then bypass the generic_write_sync() call after unwritten extent conversion has ben done and we don't force the modified metadata to stable storage. This violates O_DSYNC semantics. The window of exposure is a single IO, as the next DIO write will see the inode has dirty metadata and hence will not use the FUA optimisation. Calling generic_write_sync() after completion of the second IO will also sync the first write and it's metadata. Fix this by avoiding the FUA optimisation when writing to unwritten extents. Signed-off-by:
-
Bruce Allan authored
[ Upstream commit f25dad19 ] A recent update to smatch is causing it to report the error "we previously assumed 'm_entry->vsi_list_info' could be null". Fix that. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Dave Ertman authored
[ Upstream commit e0c9fd9b ] ice_napi_poll is hard-coded to return zero when it's done. It should instead return the work done (if any work was done). The only time it should return zero is if an interrupt or poll is handled and no work is performed. So change the return value to be the minimum of work done or budget-1. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
-
Xue Chaojing authored
[ Upstream commit b1a20048 ] In rx_alloc_pkts(), there is a loop call of tasklet, which causes 100% cpu utilization, even no packets are being received. This patch fixes this bug. Signed-off-by:
Xue Chaojing <xuechaojing@huawei.com> Signed-off-by:
-
Xue Chaojing authored
[ Upstream commit 9ea72dc9 ] In add_mac_addr(), if the MAC address is a muliticast address, it will not be set, which causes the network card fail to receive the multicast packet. This patch fixes this bug. Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 7f9f71be ] The extent shifting code uses a flush and invalidate mechainsm prior to shifting extents around. This is similar to what xfs_free_file_space() does, but it doesn't take into account things like page cache vs block size differences, and it will fail if there is a page that it currently busy. xfs_flush_unmap_range() handles all of these cases, so just convert xfs_prepare_shift() to us that mechanism rather than having it's own special sauce. Signed-off-by:
-
Ji-Ze Hong (Peter Hong) authored
[ Upstream commit ab60075f ] The F81532/534 had a internal configuration space to save & control IC state with address F81534_CUSTOM_ADDRESS_START (0x2f00). Layout as following: +00h: to indicate the section is valid +01h~04h: UART Mode & port availability +05h~08h: Output pin control on IC power on +09h~12h: Output pin control on working <-- New added Old driver will use +05~08h as default on working, but newer IC will configed with shutdown mode(7) in 05h~08h and working mode with RS232(1) in 09h~12h. It'll make mainstream driver not working. This patch will make mainstream driver compatible older and newer IC. If using a old IC, the +05h~08h will be 00h~06h, we'll direct apply it. If using a new IC, the +05h~08h will be 07h or larger, we'll read +09h~12h to apply newer configuration. Signed-off-by:
Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
