- 20 Jun, 2019 31 commits
-
-
Guoqing Jiang authored
Now, there are two places need to consider about the failure of destroy bitmap, so move the common part between bitmap_abort and abort label. Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
Guoqing Jiang authored
The write-behind attribute is part of bitmap, since bitmap can be added/removed dynamically with the following. 1. mdadm --grow /dev/md0 --bitmap=none 2. mdadm --grow /dev/md0 --bitmap=internal --write-behind So we need to destroy wb_info_pool in md_bitmap_destroy, and create the pool before load bitmap. Reviewed-by:
-
Guoqing Jiang authored
Since we can enable write-behind mode by write backlog node, so create wb_info_pool if the mode is just enabled, also call call md_bitmap_update_sb to make user aware the write-behind mode is enabled. Conversely, wb_info_pool should be destroyed when write-behind mode is disabled. Beside above, it is better to update bitmap sb if we change the number of max_write_behind. Reviewed-by:
-
Guoqing Jiang authored
Previously, we called rdev_init_wb to avoid potential data inconsistency when array is created. Now, we need to call the function and create mempool if a device is added or just be flaged as "writemostly". So mddev_create_wb_pool is introduced and called accordingly. And for safety reason, we mark implicit GFP_NOIO allocation scope for create mempool during mddev_suspend/mddev_resume. And mempool should be removed conversely after remove a member device or its's "writemostly" flag, which is done by call mddev_destroy_wb_pool. Reviewed-by:
-
Guoqing Jiang authored
For write-behind mode, we think write IO is complete once it has reached all the non-writemostly devices. It works fine for single queue devices. But for multiqueue device, if there are lots of IOs come from upper layer, then the write-behind device could issue those IOs to different queues, depends on the each queue's delay, so there is no guarantee that those IOs can arrive in order. To address the issue, we need to check the collision among write behind IOs, we can only continue without collision, otherwise wait for the completion of previous collisioned IO. And WBCollision is introduced for multiqueue device which is worked under write-behind mode. But this patch doesn't handle below cases which could have the data inconsistency issue as well, these cases will be handled in later patches. 1. modify max_write_behind by write backlog node. 2. add or remove array's bitmap dynamically. 3. the change of member disk. Reviewed-by:
-
Chaitanya Kulkarni authored
Adjust the f2fs tracing code to use newly introduced block layer function blk_op_str() which converts the REQ_OP_XXX into the string XXX. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Chaitanya Kulkarni authored
Improve the print_req_error with additional request fields which are helpful for debugging. Use newly introduced blk_op_str() to print the REQ_OP_XXX in the string format. Reviewed-by:
-
Chaitanya Kulkarni authored
Now that we've a helper function blk_op_str() to convert the REQ_OP_XXX to string XXX, adjust the code to use that. Get rid of the duplicate array op_name which is now present in the blk-core.c which we renamed it to "blk_op_name" and open coding in the blk-mq-debugfs.c. Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Chaitanya Kulkarni authored
In order to centralize the REQ_OP_XXX to string conversion which can be used in the block layer and different places in the kernel like f2fs, this patch adds a new helper function along with an array similar to the one present in the blk-mq-debugfs.c. We keep this helper functionality centralize under blk-core.c instead of blk-mq-debugfs.c since blk-core.c is configured using CONFIG_BLOCK and it will not be dependent on blk-mq-debugfs.c which is configured using CONFIG_BLK_DEBUG_FS. Next patch adjusts the code in the blk-mq-debugfs.c with newly introduced helper. Reviewed-by:
-
Christoph Hellwig authored
Print the calling function instead of print_req_error as a prefix, and print the operation and op_flags separately instead of the whole field. Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
This option is entirely bfq specific, give it an appropinquate name. Also make it depend on CONFIG_BFQ_GROUP_IOSCHED in Kconfig, as all the functionality already does so anyway. Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Christoph Hellwig authored
This function was moved from core block code and is way to generic. Fold it into the only caller and simplify it based on the actually passed arguments. Acked-by:
-
Christoph Hellwig authored
This structure and assorted infrastructure is only used by the bfq I/O scheduler. Move it there instead of bloating the common code. Acked-by:
-
Christoph Hellwig authored
When sampling the blkcg counts we don't need atomics or per-cpu variables. Introduce a new structure just containing plain u64 counters. Acked-by:
-
Christoph Hellwig authored
Returning a structure generates rather bad code, so switch to passing by reference. Also don't require the structure to be zeroed and add to the 0-initialized counters, but actually set the counters to the calculated value. Acked-by:
-
Christoph Hellwig authored
Trying to break up the crazy statements to something readable. Also switch to an unsigned counter as it can't ever turn negative. Reviewed-by:
-
Christoph Hellwig authored
This function just has a few trivial assignments, has two callers with one of them being in the fastpath. Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Christoph Hellwig authored
Now that we don't need to assign the front/back segment sizes, we can duplicating the segs assignment for the split vs no-split case and remove a whole chunk of boilerplate code. Reviewed-by:
-
Christoph Hellwig authored
Return the segement and let the callers assign them, which makes the code a littler more obvious. Also pass the request instead of q plus bio chain, allowing for the use of rq_for_each_bvec. Reviewed-by:
-
Christoph Hellwig authored
We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by:
-
Christoph Hellwig authored
lightnvm should have never used this function, as it is sending passthrough requests, so switch it to blk_rq_append_bio like all the other passthrough request users. Inline blk_init_request_from_bio into the only remaining caller. Reviewed-by:
Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by:
Javier González <javier@javigon.com> Reviewed-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
Christoph Hellwig authored
The priority field also makes sense for passthrough requests, so initialize it in blk_rq_bio_prep. Reviewed-by:
-
Dennis Zhou authored
As is, iolatency recognizes done_bio and cleanup as ending paths. If a request is marked REQ_NOWAIT and fails to get a request, the bio is cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error(). This results in underflowing the inflight counter. Fix this by only accounting bios that were actually submitted. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Pavel Begunkov authored
Commit a1ce35fa ("block: remove dead elevator code") deleted blk_end_request() and friends, but some declaration are still left. Purge them. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
-
Chaitanya Kulkarni authored
This is a pure code cleanup patch and doesn't change any functionality. Having multiple coding styles in the code creates confusion when someone tries to add a new code. Make queue_poll_stat_show() consistent by adding spaces around binary operators with the rest of the code. Signed-off-by:
-
Chaitanya Kulkarni authored
In function __blk_mq_debugfs_rq_show variable op has unsigned int type. Since op can never be negative use %u format specifier to match the variable type. Signed-off-by:
-
Chaitanya Kulkarni authored
This is a pure code cleanup patch and doesn't change any functionality. This removes the redundant else in the code which is not needed since we are returning from function anyway. Signed-off-by:
-
Chaitanya Kulkarni authored
In function null_add_dev() struct nullb *nullb member is allocated using kzalloc_node() which returns 0red memory. In function setup_queues() which is called from the null_add_dev(), on successful queue allocation we set the nullb->nr_queues = 0 which is not needed due to earlier use of kzalloc_node(). Signed-off-by:
-
Minwoo Im authored
__data_len and __sector are internal fields which should not be accessed directly in driver-level like the comment above it. But, tag field can be accessed by driver level directly so that we need to make the comment right by moving it to some other place. Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
clang warns about unusual code in floppy.c that looks like it was intended to be a bit mask operation, checking for a specific bit in the UDP->cmos variable (FLOPPY1_TYPE expands to '4' on ARM): drivers/block/floppy.c:3902:17: error: use of logical '&&' with constant operand [-Werror,-Wconstant-logical-operand] if (!UDP->cmos && FLOPPY1_TYPE) ^ ~~~~~~~~~~~~ drivers/block/floppy.c:3902:17: note: use '&' for a bitwise operation if (!UDP->cmos && FLOPPY1_TYPE) The check here is redundant anyway, if FLOPPY1_TYPE is zero, then assigning it to a zero UDP->cmos field does not change anything, so removing the extra check here has no effect other than shutting up the warning. On x86, this will no longer read a hardware register, as the FLOPPY1_TYPE macro is not expanded if UDP->cmos is already zero, but the result is the same. Cc: Robert Elliott <elliott@hpe.com> Cc: Keith Busch <kbusch@kernel.org> Link: https://patchwork.kernel.org/patch/10851841/Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 17 Jun, 2019 1 commit
-
-
Chaitanya Kulkarni authored
This is a pure code cleanup patch and doesn't change any functionality. In block layer to identify the request operation req_op() macro is used, so change the open coding the req_op() in the blk-mq-debugfs.c. Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
- 15 Jun, 2019 8 commits
-
-
Tejun Heo authored
wbc_account_io() collects information on cgroup ownership of writeback pages to determine which cgroup should own the inode. Pages can stay associated with dead memcgs but we want to avoid attributing IOs to dead blkcgs as much as possible as the association is likely to be stale. However, currently, pages associated with dead memcgs contribute to the accounting delaying and/or confusing the arbitration. Fix it by ignoring pages associated with dead memcgs. Signed-off-by:
-
Tejun Heo authored
When blkcg_activate_policy() is creating blkg_policy_data for existing blkgs, it did in the wrong order - descendants first. Fix it. None of the existing controllers seem affected by this. Signed-off-by:
-
Tejun Heo authored
blkg alloc is performed as a separate step from the rest of blkg creation so that GFP_KERNEL allocations can be used when creating blkgs from configuration file writes because otherwise user actions may fail due to failures of opportunistic GFP_NOWAIT allocations. While making blkgs use percpu_ref, 7fcf2b03 ("blkcg: change blkg reference counting to use percpu_ref") incorrectly added unconditional opportunistic percpu_ref_init() to blkg_create() breaking this guarantee. This patch moves percpu_ref_init() to blkg_alloc() so makes it use @gfp_mask that blkg_alloc() is called with. Also, percpu_ref_exit() is moved to blkg_free() for consistency. Signed-off-by:
-
Tejun Heo authored
Depending on the number of devices, blkcg stats can go over the default seqfile buf size. seqfile normally retries with a larger buffer but since the ->pd_stat() addition, blkcg_print_stat() doesn't tell seqfile that overflow has happened and the output gets printed truncated. Fix it by calling seq_commit() w/ -1 on possible overflows. Signed-off-by:
-
Tejun Heo authored
If use_delay was non-zero when the latency target of a cgroup was set to zero, it will stay stuck until io.latency is enabled on the cgroup again. This keeps readahead disabled for the cgroup impacting performance negatively. Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct bio_map_data { ... struct iovec iov[]; }; instance = kmalloc(sizeof(sizeof(struct bio_map_data) + sizeof(struct iovec) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, iov, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Reviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace the following form: sizeof(*new_ptbl) + target * sizeof(new_ptbl->part[0]) with: struct_size(new_ptbl, part, target) Also, notice that variable size is unnecessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by:
-
Bob Liu authored
Dulicate call of null_del_dev() will trigger null pointer error like below. The reason is a race condition between nullb_device_power_store() and nullb_group_drop_item(). CPU#0 CPU#1 ---------------- ----------------- do_rmdir() >configfs_rmdir() >client_drop_item() >nullb_group_drop_item() nullb_device_power_store() >null_del_dev() >test_and_clear_bit(NULLB_DEV_FL_UP >null_del_dev() ^^^^^ Duplicated null_dev_dev() triger null pointer error >clear_bit(NULLB_DEV_FL_UP The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev(). [ 698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 698.613608] #PF error: [normal kernel read fault] [ 698.613611] PGD 0 P4D 0 [ 698.613619] Oops: 0000 [#1] SMP PTI [ 698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35 [ 698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018 [ 698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk] [ 698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48 [ 698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286 [ 698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681 [ 698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000 [ 698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000 [ 698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08 [ 698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000 [ 698.613680] FS: 00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000 [ 698.613685] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0 [ 698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 698.613700] Call Trace: [ 698.613712] nullb_group_drop_item+0x50/0x70 [null_blk] [ 698.613722] client_drop_item+0x29/0x40 [ 698.613728] configfs_rmdir+0x1ed/0x300 [ 698.613738] vfs_rmdir+0xb2/0x130 [ 698.613743] do_rmdir+0x1c7/0x1e0 [ 698.613750] __x64_sys_rmdir+0x17/0x20 [ 698.613759] do_syscall_64+0x5a/0x110 [ 698.613768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
