- 10 Oct, 2019 6 commits
-
-
Quinn Tran authored
For MPI heartbeat stop Async Event, this patch would capture MPI FW dump and chip reset. FW will tell which function to capture FW dump for. Link: https://lore.kernel.org/r/20190912180918.6436-13-hmadhani@marvell.comReviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Quinn Tran authored
Add mailbox timeout checkout for ISP 27xx/28xx during FW dump procedure. Without the timeout check, hardware lock can be held for long period. This patch would shorten the dump procedure if a timeout condition is encountered. Link: https://lore.kernel.org/r/20190912180918.6436-12-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
During driver unload, the remove flag will be set for all scsi_qla_host/NPIV. This allows each NPIV to see the flag instead of reaching for base_vha to search for it. Link: https://lore.kernel.org/r/20190912180918.6436-11-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
Add error handling logic to ELS Passthrough relating to NVME devices. Current code does not parse error code to take proper recovery action, instead it re-logins with the same login parameters that encountered the error. Ex: nport handle collision. Link: https://lore.kernel.org/r/20190912180918.6436-10-hmadhani@marvell.comSigned-off-by:
-
Michael Hernandez authored
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same WWN. The driver now offers a user option by way of NVRAM parameter to allow users to choose, on a per port basis, the kind of FC-4 type they would like to prioritize for login. Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.comSigned-off-by:
Michael Hernandez <mhernandez@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
The qla2xxx driver updates for 5.5 depend on the fixes queued for 5.4. Signed-off-by:
-
- 04 Oct, 2019 4 commits
-
-
Bart Van Assche authored
Maintaining tpg_list without ever iterating over it is not useful. Hence remove tpg_list. This patch does not change the behavior of the SCSI target code. Cc: Mike Christie <mchristie@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Link: https://lore.kernel.org/r/20190930232224.58980-1-bvanassche@acm.orgSigned-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Himanshu Madhani authored
Update maintainer entry for qla2xxx driver now that email addresses have been changed to Marvell. Link: https://lore.kernel.org/r/20191001153338.28765-1-hmadhani@marvell.comSigned-off-by:
-
Steffen Maier authored
On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #2.6.30+ Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Damien Le Moal authored
When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
- 01 Oct, 2019 30 commits
-
-
YueHaibing authored
Fix sparse warning: drivers/scsi/bfa/bfad.c:1491:1: warning: symbol 'restart_bfa' was not declared. Should it be static? Link: https://lore.kernel.org/r/20190930094327.46836-1-yuehaibing@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Daniel Wagner authored
Commit 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") introduced the WARN_ON_ONCE in qla2x00_status_cont_entry(). The assumption was that there is only one status continuations element. According to the firmware documentation it is possible that multiple status continuations are emitted by the firmware. Fixes: 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") Link: https://lore.kernel.org/r/20190927073031.62296-1-dwagner@suse.de Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
Oliver Neukum authored
I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Austin Kim authored
Since 'commit fc8d0590 ("libcxgbi: Add ipv6 api to driver")' was introduced, there is no call to csk_print_port() and csk_print_ip() is made. Hence kernel build with clang complains below message: drivers/scsi/cxgbi/libcxgbi.c:2287:19: warning: unused function 'csk_print_port' [-Wunused-function] static inline int csk_print_port(struct cxgbi_sock *csk, char *buf) ^ drivers/scsi/cxgbi/libcxgbi.c:2298:19: warning: unused function 'csk_print_ip' [-Wunused-function] static inline int csk_print_ip(struct cxgbi_sock *csk, char *buf) ^ Remove csk_print_port() and csk_print_ip() to stop warning. Link: https://lore.kernel.org/r/20190924093716.GA78230@LGEARND20B15Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
-
Ryan Attard authored
Add sysfs attributes for the ATA information page and Supported VPD Pages page. Link: https://lore.kernel.org/r/20190926162216.56591-1-ryanattard@ryanattard.infoSigned-off-by:
Ryan Attard <ryanattard@ryanattard.info> Reviewed-by:
-
Colin Ian King authored
There are some statements that are indented too deeply, remove the extraneous tabs and rejoin split lines. Link: https://lore.kernel.org/r/20190927095840.26377-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The goto statement is indented incorrectly, remove the extraneous tab. Link: https://lore.kernel.org/r/20190926115716.3698-1-colin.king@canonical.comSigned-off-by:
-
Milan P. Gandhi authored
Couple of users had requested to print the SCSI command age along with command failure errors. This is a small change, but allows users to get more important information about the command that was failed, it would help the users in debugging the command failures: Link: https://lore.kernel.org/r/20190926052501.GA8352@machine1Signed-off-by:
Milan P. Gandhi <mgandhi@redhat.com> Reviewed-by:
-
Daniel Wagner authored
Add qedf_get_host_port_id() to the transport template. The fc_transport_template initializes the port_id member to the default value of -1. The new getter ensures that the sysfs entry shows the current value and not the default one, e.g by using 'lsscsi -H -t' Link: https://lore.kernel.org/r/20190924072906.23737-1-dwagner@suse.deSigned-off-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
-
Stanley Chu authored
Enable auto suspend capability in MediaTek UFS driver. Link: https://lore.kernel.org/r/1568649411-5127-4-git-send-email-stanley.chu@mediatek.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Stanley Chu authored
Rework from previous work by: Sujit Reddy Thumma <sthumma@codeaurora.org> Override auto suspend tunables for UFS device LUNs during initialization so as to efficiently manage background operations and the power consumption. Link: https://lore.kernel.org/r/1568649411-5127-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Stanley Chu authored
Rework from previous work by: Sujit Reddy Thumma <sthumma@codeaurora.org> Until now the scsi mid-layer forbids runtime suspend till userspace enables it. This is mainly to quarantine some disks with broken runtime power management or have high latencies executing suspend resume callbacks. If the userspace doesn't enable the runtime suspend the underlying hardware will be always on even when it is not doing any useful work and thus wasting power. Some low-level drivers for the controllers can efficiently use runtime power management to reduce power consumption and improve battery life. Allow runtime suspend parameters override within the LLD itself instead of waiting for userspace to control the power management. Link: https://lore.kernel.org/r/1568649411-5127-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Colin Ian King authored
There is a spelling mistake in literal string. Fix it. Link: https://lore.kernel.org/r/20190916091706.32268-1-colin.king@canonical.comSigned-off-by:
-
Arkadiusz Drabczyk authored
Fix several spelling typos in comments in csio_hw.c. Link: https://lore.kernel.org/r/20190912172546.16489-1-arkadiusz@drabczyk.orgSigned-off-by:
Arkadiusz Drabczyk <arkadiusz@drabczyk.org> Signed-off-by:
-
Navid Emamdoost authored
In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released. Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.comSigned-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known function. Generated by: scripts/coccinelle/api/ptr_ret.cocci [mkp: applied by hand] Link: https://lore.kernel.org/r/9e667f19-434e-ed30-78cb-9ddc6323c51e@web.deSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
-
Colin Ian King authored
Don't populate the array setup_attrs on the stack but instead make it static const. Makes the object code smaller by 180 bytes. Before: text data bss dec hex filename 2140 224 0 2364 93c drivers/scsi/ufs/ufshcd-dwc.o After: text data bss dec hex filename 1863 320 0 2183 887 drivers/scsi/ufs/ufshcd-dwc.o (gcc version 9.2.1, amd64) Link: https://lore.kernel.org/r/20190906170104.10450-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
Don't populate the array 'options' on the stack but instead make it static const. Makes the object code smaller by 143 bytes. Before: text data bss dec hex filename 94483 11272 1184 106939 1a1bb drivers/scsi/ips.o After: text data bss dec hex filename 94244 11368 1184 106796 1a12c drivers/scsi/ips.o (gcc version 9.2.1, amd64) Link: https://lore.kernel.org/r/20190906164522.5644-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
Don't populate the array dev_cmd_err on the stack but instead make it static const. Makes the object code smaller by 80 bytes. Before: text data bss dec hex filename 21461 1564 0 23025 59f1 drivers/scsi/fnic/vnic_dev.o After: text data bss dec hex filename 21318 1628 0 22946 59a2 drivers/scsi/fnic/vnic_dev.o (gcc version 9.2.1, amd64) Link: https://lore.kernel.org/r/20190906163945.3889-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
The variable rc is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Link: https://lore.kernel.org/r/20190905135017.23772-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by:
-
Colin Ian King authored
The pointer host is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Link: https://lore.kernel.org/r/20190905134229.21194-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/smartpqi/smartpqi_init.c: In function 'pqi_driver_version_show': drivers/scsi/smartpqi/smartpqi_init.c:6164:24: warning: variable 'ctrl_info' set but not used [-Wunused-but-set-variable] commit 6d90615f ("scsi: smartpqi: add sysfs entries") added it but it was never used. Also remove variable 'shost'. [mkp: commit desc] Link: https://lore.kernel.org/r/20190831130348.20552-1-yuehaibing@huawei.comReported-by:
-
Colin Ian King authored
There is a statement that is indented one level too deeply, remove the tab, re-join broken line and remove some empty lines. Link: https://lore.kernel.org/r/20190831073903.7834-1-colin.king@canonical.com Addresses-Coverity: ("Indentation does not match nesting") Signed-off-by:
-
Sreekanth Reddy authored
Bump mpt3sas driver version to 32.100.00.00 Link: https://lore.kernel.org/r/1568379890-18347-14-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Load driver with module parameter "max_msix_vectors". Value provided in module parameter is not used by mpt3sas driver. Driver loads with max controller supported MSI-X value. In _base_alloc_irq_vectors use reply_queue_count which is determined using user provided msix value insted of ioc->msix_vector_count which tells max supported msix value of the controller. Link: https://lore.kernel.org/r/1568379890-18347-13-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
If any faulty application issues an NVMe Encapsulated commands to HBA which doesn't support NVMe protocol then driver should return the command as invalid with the following message. "HBA doesn't support NVMe. Rejecting NVMe Encapsulated request." Otherwise below page fault kernel panic will be observed while building the PRPs as there is no PRP pools allocated for the HBA which doesn't support NVMe drives. RIP: 0010:_base_build_nvme_prp+0x3b/0xf0 [mpt3sas] Call Trace: _ctl_do_mpt_command+0x931/0x1120 [mpt3sas] _ctl_ioctl_main.isra.11+0xa28/0x11e0 [mpt3sas] ? prepare_to_wait+0xb0/0xb0 ? tty_ldisc_deref+0x16/0x20 _ctl_ioctl+0x1a/0x20 [mpt3sas] do_vfs_ioctl+0xaa/0x620 ? vfs_read+0x117/0x140 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x60/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [mkp: tweaked error string] Link: https://lore.kernel.org/r/1568379890-18347-12-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
The firmware image layout has been changed for Aero controllers. All compatible HBAs have to get Firmware Package version from Component Image Header layout. The Signature field in FW header is set to 0xEB000042 for products compatible with Component Image Header. For compatible controllers, driver fetches firmware package version from ApplicationSpecific field of Component Image Header. Link: https://lore.kernel.org/r/1568379890-18347-11-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
Return the diag buffer release command with -EINVAL status if the buffer is already released. Link: https://lore.kernel.org/r/1568379890-18347-10-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
Added a new status flag named MPT3_DIAG_BUFFER_IS_APP_OWNED and it will set whenever application registers the diag buffer & it will be cleared when application unregisters the buffer. When this flag is enabled, and if application issues diag buffer register command without releasing the buffer, then register command will be failed with -EINVAL status by saying that this buffer is already registered by the application. When user issues a trace buffer register command through sysfs parameter, and if trace buffer is in released stated but not yet unregistered by the application which was owning it, then driver will unregister the buffer by itself and freshly register the 1MB sized trace buffer with the HBA firmware. Link: https://lore.kernel.org/r/1568379890-18347-9-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
The diag buffer which is allocated during driver load time or through sysfs parameter is marked as driver allocated diag buffer. MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED bit will be set for this buffer. This buffer won't be de-allocated even when application issues unregister command, driver just clears the registered status bit. Same buffer will be reused while re-registering the same diag buffer type by any application. While re-registering the same diag buffer type application has to register with the same size that the buffer was allocated during driver load time. This buffer size can be read by the application by issuing diag 'query' command. This always makes sure that the memory is available for applications for collecting the firmware logs. Only thing is that this won't allow the application to re-register the diag buffer with different size, but the buffer size which is allocated during driver load time will be enough for most of the cases for collecting the firmware logs. Link: https://lore.kernel.org/r/1568379890-18347-8-git-send-email-sreekanth.reddy@broadcom.comSigned-off-by:
-
