- 21 Mar, 2019 2 commits
-
-
Song Liu authored
To fully annotate BPF programs with source code mapping, 4 different information are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf This patch handles 3) and 4) for BPF programs loaded after 'perf record|top'. For timely process of these information, a dedicated event is added to the side band evlist. When PERF_RECORD_BPF_EVENT is received via the side band event, the polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env. This information is saved to perf.data at the end of 'perf record'. Committer testing: The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a unnamed union, so can't be used in a struct designated initialization with older gccs, get it out of that, isolating as 'attr.wakeup_watermark = 1;' to work with all gcc versions. We also need to add '--no-bpf-event' to the 'perf record' perf_event_attr tests in 'perf test', as the way that that test goes is to intercept the events being setup and looking if they match the fields described in the control files, since now it finds first the side band event used to catch the PERF_RECORD_BPF_EVENT, they all fail. With these issues fixed: Same scenario as for testing BPF programs loaded before 'perf record' or 'perf top' starts, only start the BPF programs after 'perf record|top', so that its information get collected by the sideband threads, the rest works as for the programs loaded before start monitoring. Add missing 'inline' to the bpf_event__add_sb_event() when HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without binutils devel files installed. Signed-off-by:Song Liu <songliubraving@fb.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.comSigned-off-by:
-
Song Liu authored
This patch introduces side band thread that captures extended information for events like PERF_RECORD_BPF_EVENT. This new thread uses its own evlist that uses ring buffer with very low watermark for lower latency. To use side band thread, we need to: 1. add side band event(s) by calling perf_evlist__add_sb_event(); 2. calls perf_evlist__start_sb_thread(); 3. at the end of perf run, perf_evlist__stop_sb_thread(). In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT. Committer notes: Add fix by Jiri Olsa for when te sb_tread can't get started and then at the end the stop_sb_thread() segfaults when joining the (non-existing) thread. That can happen when running 'perf top' or 'perf record' as a normal user, for instance. Further checks need to be done on top of this to more graciously handle these possible failure scenarios. Signed-off-by:
-
- 20 Mar, 2019 2 commits
-
-
Song Liu authored
In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into a new function symbol__disassemble_bpf(), where annotation line information is filled based on the bpf_prog_info and btf data saved in given perf_env. symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf programs. Committer testing: After fixing this: - u64 *addrs = (u64 *)(info_linear->info.jited_ksyms); + u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms); Detected when crossbuilding to a 32-bit arch. And making all this dependent on HAVE_LIBBFD_SUPPORT and HAVE_LIBBPF_SUPPORT: 1) Have a BPF program running, one that has BTF info, etc, I used the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place by 'perf trace'. # grep -B1 augmented_raw ~/.perfconfig [trace] add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c # # perf trace -e *mmsg dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2 NetworkManager/10055 sendmmsg(22<socket:[1056822]>, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2 2) Then do a 'perf record' system wide for a while: # perf record -a ^C[ perf record: Woken up 68 times to write data ] [ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ] # 3) Check that we captured BPF and BTF info in the perf.data file: # perf report --header-only | grep 'b[pt]f' # event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1 # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 41 # bpf_prog_info of id 42 # btf info of id 2 # 4) Check which programs got recorded: # perf report | grep bpf_prog | head 0.16% exe bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.14% exe bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.08% fuse-overlayfs bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.07% fuse-overlayfs bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.01% clang-4.0 bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.01% clang-4.0 bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% clang bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.00% runc bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% clang bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% sh bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit # This was with the default --sort order for 'perf report', which is: --sort comm,dso,symbol If we just look for the symbol, for instance: # perf report --sort symbol | grep bpf_prog | head 0.26% [k] bpf_prog_819967866022f1e1_sys_enter - - 0.24% [k] bpf_prog_c1bd85c092d6e4aa_sys_exit - - # or the DSO: # perf report --sort dso | grep bpf_prog | head 0.26% bpf_prog_819967866022f1e1_sys_enter 0.24% bpf_prog_c1bd85c092d6e4aa_sys_exit # We'll see the two BPF programs that augmented_raw_syscalls.o puts in place, one attached to the raw_syscalls:sys_enter and another to the raw_syscalls:sys_exit tracepoints, as expected. Now we can finally do, from the command line, annotation for one of those two symbols, with the original BPF program source coude intermixed with the disassembled JITed code: # perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter Samples: 950 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period] bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter Percent int sys_enter(struct syscall_enter_args *args) 53.41 push %rbp 0.63 mov %rsp,%rbp 0.31 sub $0x170,%rsp 1.93 sub $0x28,%rbp 7.02 mov %rbx,0x0(%rbp) 3.20 mov %r13,0x8(%rbp) 1.07 mov %r14,0x10(%rbp) 0.61 mov %r15,0x18(%rbp) 0.11 xor %eax,%eax 1.29 mov %rax,0x20(%rbp) 0.11 mov %rdi,%rbx return bpf_get_current_pid_tgid(); 2.02 → callq *ffffffffda6776d9 2.76 mov %eax,-0x148(%rbp) mov %rbp,%rsi int sys_enter(struct syscall_enter_args *args) add $0xfffffffffffffeb8,%rsi return bpf_map_lookup_elem(pids, &pid) != NULL; movabs $0xffff975ac2607800,%rdi 1.26 → callq *ffffffffda6789e9 cmp $0x0,%rax 2.43 → je 0 add $0x38,%rax 0.21 xor %r13d,%r13d if (pid_filter__has(&pids_filtered, getpid())) 0.81 cmp $0x0,%rax → jne 0 mov %rbp,%rdi probe_read(&augmented_args.args, sizeof(augmented_args.args), args); 2.22 add $0xfffffffffffffeb8,%rdi 0.11 mov $0x40,%esi 0.32 mov %rbx,%rdx 2.74 → callq *ffffffffda658409 syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr); 0.22 mov %rbp,%rsi 1.69 add $0xfffffffffffffec0,%rsi syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr); movabs $0xffff975bfcd36000,%rdi add $0xd0,%rdi 0.21 mov 0x0(%rsi),%eax 0.93 cmp $0x200,%rax → jae 0 0.10 shl $0x3,%rax 0.11 add %rdi,%rax 0.11 → jmp 0 xor %eax,%eax if (syscall == NULL || !syscall->enabled) 1.07 cmp $0x0,%rax → je 0 if (syscall == NULL || !syscall->enabled) 6.57 movzbq 0x0(%rax),%rdi if (syscall == NULL || !syscall->enabled) cmp $0x0,%rdi 0.95 → je 0 mov $0x40,%r8d switch (augmented_args.args.syscall_nr) { mov -0x140(%rbp),%rdi switch (augmented_args.args.syscall_nr) { cmp $0x2,%rdi → je 0 cmp $0x101,%rdi → je 0 cmp $0x15,%rdi → jne 0 case SYS_OPEN: filename_arg = (const void *)args->args[0]; mov 0x10(%rbx),%rdx → jmp 0 case SYS_OPENAT: filename_arg = (const void *)args->args[1]; mov 0x18(%rbx),%rdx if (filename_arg != NULL) { cmp $0x0,%rdx → je 0 xor %edi,%edi augmented_args.filename.reserved = 0; mov %edi,-0x104(%rbp) augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %rbp,%rdi add $0xffffffffffffff00,%rdi augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov $0x100,%esi → callq *ffffffffda658499 mov $0x148,%r8d augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %eax,-0x108(%rbp) augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %rax,%rdi shl $0x20,%rdi shr $0x20,%rdi if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) { cmp $0xff,%rdi → ja 0 len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size; add $0x48,%rax len &= sizeof(augmented_args.filename.value) - 1; and $0xff,%rax mov %rax,%r8 mov %rbp,%rcx return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len); add $0xfffffffffffffeb8,%rcx mov %rbx,%rdi movabs $0xffff975fbd72d800,%rsi mov $0xffffffff,%edx → callq *ffffffffda658ad9 mov %rax,%r13 } mov %r13,%rax 0.72 mov 0x0(%rbp),%rbx mov 0x8(%rbp),%r13 1.16 mov 0x10(%rbp),%r14 0.10 mov 0x18(%rbp),%r15 0.42 add $0x28,%rbp 0.54 leaveq 0.54 ← retq # Please see 'man perf-config' to see how to control what should be seen, via ~/.perfconfig [annotate] section, for instance, one can suppress the source code and see just the disassembly, etc. Alternatively, use the TUI bu just using 'perf annotate', press '/bpf_prog' to see the bpf symbols, press enter and do the interactive annotation, which allows for dumping to a file after selecting the the various output tunables, for instance, the above without source code intermixed, plus showing all the instruction offsets: # perf annotate bpf_prog_819967866022f1e1_sys_enter Then press: 's' to hide the source code + 'O' twice to show all instruction offsets, then 'P' to print to the bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have: # cat bpf_prog_819967866022f1e1_sys_enter.annotation bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter Event: cycles:ppp 53.41 0: push %rbp 0.63 1: mov %rsp,%rbp 0.31 4: sub $0x170,%rsp 1.93 b: sub $0x28,%rbp 7.02 f: mov %rbx,0x0(%rbp) 3.20 13: mov %r13,0x8(%rbp) 1.07 17: mov %r14,0x10(%rbp) 0.61 1b: mov %r15,0x18(%rbp) 0.11 1f: xor %eax,%eax 1.29 21: mov %rax,0x20(%rbp) 0.11 25: mov %rdi,%rbx 2.02 28: → callq *ffffffffda6776d9 2.76 2d: mov %eax,-0x148(%rbp) 33: mov %rbp,%rsi 36: add $0xfffffffffffffeb8,%rsi 3d: movabs $0xffff975ac2607800,%rdi 1.26 47: → callq *ffffffffda6789e9 4c: cmp $0x0,%rax 2.43 50: → je 0 52: add $0x38,%rax 0.21 56: xor %r13d,%r13d 0.81 59: cmp $0x0,%rax 5d: → jne 0 63: mov %rbp,%rdi 2.22 66: add $0xfffffffffffffeb8,%rdi 0.11 6d: mov $0x40,%esi 0.32 72: mov %rbx,%rdx 2.74 75: → callq *ffffffffda658409 0.22 7a: mov %rbp,%rsi 1.69 7d: add $0xfffffffffffffec0,%rsi 84: movabs $0xffff975bfcd36000,%rdi 8e: add $0xd0,%rdi 0.21 95: mov 0x0(%rsi),%eax 0.93 98: cmp $0x200,%rax 9f: → jae 0 0.10 a1: shl $0x3,%rax 0.11 a5: add %rdi,%rax 0.11 a8: → jmp 0 aa: xor %eax,%eax 1.07 ac: cmp $0x0,%rax b0: → je 0 6.57 b6: movzbq 0x0(%rax),%rdi bb: cmp $0x0,%rdi 0.95 bf: → je 0 c5: mov $0x40,%r8d cb: mov -0x140(%rbp),%rdi d2: cmp $0x2,%rdi d6: → je 0 d8: cmp $0x101,%rdi df: → je 0 e1: cmp $0x15,%rdi e5: → jne 0 e7: mov 0x10(%rbx),%rdx eb: → jmp 0 ed: mov 0x18(%rbx),%rdx f1: cmp $0x0,%rdx f5: → je 0 f7: xor %edi,%edi f9: mov %edi,-0x104(%rbp) ff: mov %rbp,%rdi 102: add $0xffffffffffffff00,%rdi 109: mov $0x100,%esi 10e: → callq *ffffffffda658499 113: mov $0x148,%r8d 119: mov %eax,-0x108(%rbp) 11f: mov %rax,%rdi 122: shl $0x20,%rdi 126: shr $0x20,%rdi 12a: cmp $0xff,%rdi 131: → ja 0 133: add $0x48,%rax 137: and $0xff,%rax 13d: mov %rax,%r8 140: mov %rbp,%rcx 143: add $0xfffffffffffffeb8,%rcx 14a: mov %rbx,%rdi 14d: movabs $0xffff975fbd72d800,%rsi 157: mov $0xffffffff,%edx 15c: → callq *ffffffffda658ad9 161: mov %rax,%r13 164: mov %r13,%rax 0.72 167: mov 0x0(%rbp),%rbx 16b: mov 0x8(%rbp),%r13 1.16 16f: mov 0x10(%rbp),%r14 0.10 173: mov 0x18(%rbp),%r15 0.42 177: add $0x28,%rbp 0.54 17b: leaveq 0.54 17c: ← retq Another cool way to test all this is to symple use 'perf top' look for those symbols, go there and press enter, annotate it live :-) Signed-off-by: -
Song Liu authored
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by:
-
- 19 Mar, 2019 36 commits
-
-
Song Liu authored
This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets proper DSO type/id/etc of memory regions mapped to BPF programs to DSO_BINARY_TYPE__BPF_PROG_INFO. Signed-off-by:
-
Song Liu authored
Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new function symbol__disassemble_bpf() in an upcoming patch, where annotation line information is filled based bpf_prog_info and btf saved in given perf_env. Committer notes: Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso', to fix this bug when exiting 'perf top': # perf top perf: Segmentation fault -------- backtrace -------- perf[0x5a785a] /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf] perf(rb_first+0x2b)[0x4d6eeb] perf(dso__delete+0xb7)[0x4dffb7] perf[0x4f9e37] perf(perf_session__delete+0x64)[0x504df4] perf(cmd_top+0x1957)[0x454467] perf[0x4aad18] perf(main+0x61c)[0x42ec7c] /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412] perf(_start+0x2d)[0x42eead] # # addr2line -fe ~/bin/perf 0x4dffb7 dso_cache__free /home/acme/git/perf/tools/perf/util/dso.c:713 That is trying to access the dso->data.cache, and that is not used with BPF programs, so we end up accessing what is in bpf_prog.first_member, b00m. Signed-off-by:
-
Song Liu authored
Both libbfd and libopcodes are distributed with binutil-dev/devel. When libbfd is present, it is OK to assume that libopcodes also present. This has been a safe assumption for bpftool. This patch adds -lopcodes to perf/Makefile.config. libopcodes will be used in the next commit for BPF annotation. Signed-off-by:
-
Song Liu authored
This patch adds option --no-bpf-event to 'perf top', which is the same as the option of 'perf record'. The following patches will use this option. Committer testing: # perf top -vv 2> /tmp/perf_event_attr.out # cat /tmp/perf_event_attr.out ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ # After this patch: # perf top --no-bpf-event -vv 2> /tmp/perf_event_attr.out # cat /tmp/perf_event_attr.out ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|CPU|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 ------------------------------------------------------------ # Signed-off-by: -
Song Liu authored
This patch enables 'perf record' to save BTF information as headers to perf.data. A new header type HEADER_BPF_BTF is introduced for this data. Committer testing: As root, being on the kernel sources top level directory, run: # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg Just to compile and load a BPF program that attaches to the raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc). Make sure you have a recent enough clang, say version 9, to get the BTF ELF sections needed for this testing: # clang --version | head -1 clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500) # readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF [22] .BTF PROGBITS 0000000000000000 000ede 000b0e 00 0 0 1 [23] .BTF.ext PROGBITS 0000000000000000 0019ec 0002a0 00 0 0 1 [24] .rel.BTF.ext REL 0000000000000000 002fa8 000270 10 30 23 8 Then do a systemwide perf record session for a few seconds: # perf record -a sleep 2s Then look at: # perf report --header-only | grep b[pt]f # event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1 # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 51 # bpf_prog_info of id 52 # btf info of id 8 # We need to show more info about these BPF and BTF entries , but that can be done later. Signed-off-by: -
Song Liu authored
BTF contains information necessary to annotate BPF programs. This patch saves BTF for BPF programs loaded in the system. Signed-off-by:
-
Song Liu authored
This patch enables perf-record to save bpf_prog_info information as headers to perf.data. A new header type HEADER_BPF_PROG_INFO is introduced for this data. Committer testing: As root, being on the kernel sources top level directory, run: # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg Just to compile and load a BPF program that attaches to the raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc). Then do a systemwide perf record session for a few seconds: # perf record -a sleep 2s Then look at: # perf report --header-only | grep -i bpf # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 208 # bpf_prog_info of id 209 # We need to show more info about these programs, like bpftool does for the ones running on the system, i.e. 'perf record/perf report' become a way of saving the BPF state in a machine to then analyse on another, together with all the other information that is already saved in the perf.data header: # perf report --header-only # ======== # captured on : Tue Mar 12 11:42:13 2019 # header version : 1 # data offset : 296 # data size : 16294184 # feat offset : 16294480 # hostname : quaco # os release : 5.0.0+ # perf version : 5.0.gd783c8 # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz # cpuid : GenuineIntel,6,142,10 # total memory : 24555720 kB # cmdline : /home/acme/bin/perf (deleted) record -a # event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 31901264, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1 # CPU_TOPOLOGY info available, use -I to display # NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14 # CACHE info available, use -I to display # time of first sample : 116392.441701 # time of last sample : 116400.932584 # sample duration : 8490.883 ms # MEM_TOPOLOGY info available, use -I to display # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 208 # bpf_prog_info of id 209 # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT # ======== # Committer notes: We can't use the libbpf unconditionally, as the build may have been with NO_LIBBPF, when we end up with linking errors, so provide dummy {process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that case. Printing are not affected by this, so can continue as is. Signed-off-by: -
Song Liu authored
bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: -
Song Liu authored
This patch changes the arguments of perf_event__synthesize_bpf_events() to include perf_session* instead of perf_tool*. perf_session will be used in the next patch. Signed-off-by:
-
Song Liu authored
With bpf_program__get_prog_info_linear, we can simplify the logic that synthesizes bpf events. This patch doesn't change the behavior of the code. Commiter notes: Needed this (for all four variables), suggested by Song, to overcome build failure on debian experimental cross building to MIPS 32-bit: - u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags); + u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags); util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog': util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags); ^ util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] __u32 *prog_lens = (__u32 *)(info->jited_func_lens); ^ util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] __u64 *prog_addrs = (__u64 *)(info->jited_ksyms); ^ util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] void *func_infos = (void *)(info->func_info); ^ cc1: all warnings being treated as errors Signed-off-by: -
Song Liu authored
This patches uses bpf_program__get_prog_info_linear() to simplify the logic in prog.c do_dump(). Committer testing: Before: # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before # bpftool prog dump jited id 208 > /tmp/dump.jited.before # bpftool map dump id 107 > /tmp/map.dump.before After: # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after # diff -u /tmp/dump.jited.before /tmp/dump.jited.after # diff -u /tmp/map.dump.before /tmp/map.dump.after # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 0: (bf) r6 = r1 1: (85) call bpf_get_current_pid_tgid#80800 2: (63) *(u32 *)(r10 -328) = r0 3: (bf) r2 = r10 4: (07) r2 += -328 5: (18) r1 = map[id:107] 7: (85) call __htab_map_lookup_elem#85680 8: (15) if r0 == 0x0 goto pc+1 9: (07) r0 += 56 10: (b7) r7 = 0 11: (55) if r0 != 0x0 goto pc+52 12: (bf) r1 = r10 13: (07) r1 += -328 14: (b7) r2 = 64 15: (bf) r3 = r6 16: (85) call bpf_probe_read#-46848 17: (bf) r2 = r10 18: (07) r2 += -320 19: (18) r1 = map[id:106] 21: (07) r1 += 208 22: (61) r0 = *(u32 *)(r2 +0) 23: (35) if r0 >= 0x200 goto pc+3 24: (67) r0 <<= 3 25: (0f) r0 += r1 26: (05) goto pc+1 27: (b7) r0 = 0 28: (15) if r0 == 0x0 goto pc+35 29: (71) r1 = *(u8 *)(r0 +0) 30: (15) if r1 == 0x0 goto pc+33 31: (b7) r5 = 64 32: (79) r1 = *(u64 *)(r10 -320) 33: (15) if r1 == 0x2 goto pc+2 34: (15) if r1 == 0x101 goto pc+3 35: (55) if r1 != 0x15 goto pc+19 36: (79) r3 = *(u64 *)(r6 +16) 37: (05) goto pc+1 38: (79) r3 = *(u64 *)(r6 +24) 39: (15) if r3 == 0x0 goto pc+15 40: (b7) r1 = 0 41: (63) *(u32 *)(r10 -260) = r1 42: (bf) r1 = r10 43: (07) r1 += -256 44: (b7) r2 = 256 45: (85) call bpf_probe_read_str#-46704 46: (b7) r5 = 328 47: (63) *(u32 *)(r10 -264) = r0 48: (bf) r1 = r0 49: (67) r1 <<= 32 50: (77) r1 >>= 32 51: (25) if r1 > 0xff goto pc+3 52: (07) r0 += 72 53: (57) r0 &= 255 54: (bf) r5 = r0 55: (bf) r4 = r10 56: (07) r4 += -328 57: (bf) r1 = r6 58: (18) r2 = map[id:105] 60: (18) r3 = 0xffffffff 62: (85) call bpf_perf_event_output_tp#-45104 63: (bf) r7 = r0 64: (bf) r0 = r7 65: (95) exit # Signed-off-by:Daniel Borkmann <daniel@iogearbox.net> Tested-by:
-
Song Liu authored
Currently, bpf_prog_info includes 9 arrays. The user has the option to fetch any combination of these arrays. However, this requires a lot of handling. This work becomes more tricky when we need to store bpf_prog_info to a file, because these arrays are allocated independently. This patch introduces 'struct bpf_prog_info_linear', which stores arrays of bpf_prog_info in continuous memory. Helper functions are introduced to unify the work to get different sets of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear() allows the user to select which arrays to fetch, and handles details for the user. Please see the comments right before 'enum bpf_prog_info_array' for more details and examples. Signed-off-by:
-
Song Liu authored
Currently, monitoring of BPF programs through bpf_event is off by default for 'perf record'. To turn it on, the user need to use option "--bpf-event". As BPF gets wider adoption in different subsystems, this option becomes inconvenient. This patch makes bpf_event on by default, and adds option "--no-bpf-event" to turn it off. Since option --bpf-event is not released yet, it is safe to remove it. Signed-off-by:
-
Changbin Du authored
================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by:Changbin Du <changbin.du@gmail.com> Reviewed-by:
-
Changbin Du authored
================================================================= ==7506==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13 byte(s) in 3 object(s) allocated from: #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x5625e53aaef0 in expr__find_other util/expr.y:221 #2 0x5625e51bcd3f in test__expr tests/expr.c:52 #3 0x5625e51528e6 in run_test tests/builtin-test.c:358 #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #6 0x5625e515572f in cmd_test tests/builtin-test.c:722 #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Changbin Du authored
================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Arnaldo Carvalho de Melo authored
Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: -
Changbin Du authored
The array str[] should have six elements. ================================================================= ==4322==ERROR: AddressSanitizer: global-buffer-overflow on address 0x56463844e300 at pc 0x564637e7ad0d bp 0x7f30c8c89d10 sp 0x7f30c8c89d00 READ of size 8 at 0x56463844e300 thread T9 #0 0x564637e7ad0c in __ordered_events__flush util/ordered-events.c:316 #1 0x564637e7b0e4 in ordered_events__flush util/ordered-events.c:338 #2 0x564637c6a57d in process_thread /home/changbin/work/linux/tools/perf/builtin-top.c:1073 #3 0x7f30d173a163 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x8163) #4 0x7f30cfffbdee in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x11adee) 0x56463844e300 is located 32 bytes to the left of global variable 'flags' defined in 'util/trace-event-parse.c:229:26' (0x56463844e320) of size 192 0x56463844e300 is located 0 bytes to the right of global variable 'str' defined in 'util/ordered-events.c:268:28' (0x56463844e2e0) of size 32 SUMMARY: AddressSanitizer: global-buffer-overflow util/ordered-events.c:316 in __ordered_events__flush Shadow bytes around the buggy address: 0x0ac947081c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c50: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 =>0x0ac947081c60:[f9]f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c70: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9 0x0ac947081c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ac947081cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Thread T9 created by T0 here: #0 0x7f30d179de5f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x4ae5f) #1 0x564637c6b954 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1253 #2 0x564637c7173c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #3 0x564637d85038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #4 0x564637d85577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #5 0x564637d8597b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #6 0x564637d860e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #7 0x7f30cff0509a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Changbin Du authored
Add function __maps__purge_names() to purge all maps from the names tree. We need to cleanup the names tree in maps__exit(). Detected with gcc's ASan. Signed-off-by:
-
Changbin Du authored
There are two trees for each map inserted by maps__insert(), so remove it from the 'names' tree in __maps__remove(). Detected with gcc's ASan. Signed-off-by:
-
Changbin Du authored
We need to map__put() before returning from failure of sample__resolve_callchain(). Detected with gcc's ASan. Signed-off-by:
-
Changbin Du authored
We should go to the cleanup path, to avoid leaks, detected using gcc's ASan. Signed-off-by:
-
Changbin Du authored
The evlist should be destroyed before the perf session. Detected with gcc's ASan: ================================================================= ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0 #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here: #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) previously allocated by thread T0 here: #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address: 0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==27350==ABORTING Signed-off-by: -
Changbin Du authored
Detected with gcc's ASan: Direct leak of 4356 byte(s) in 120 object(s) allocated from: #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215 #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339 #3 0x55719af66272 in print_events util/parse-events.c:2542 #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Changbin Du authored
Detected with gcc's ASan: Direct leak of 66 byte(s) in 5 object(s) allocated from: #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x560c8761034d in collect_config util/config.c:597 #2 0x560c8760d9cb in get_value util/config.c:169 #3 0x560c8760dfd7 in perf_parse_file util/config.c:285 #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476 #5 0x560c876108fd in perf_config_set__init util/config.c:661 #6 0x560c87610c72 in perf_config_set__new util/config.c:709 #7 0x560c87610d2f in perf_config__init util/config.c:718 #8 0x560c87610e5d in perf_config util/config.c:730 #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442 #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Changbin Du authored
The option 'sort-order' should be 'sort_order'. Signed-off-by:
-
Changbin Du authored
Optimization level '-Og' offers a reasonable level of optimization while maintaining fast compilation and a good debugging experience. This patch tries to make it work. $ make DEBUG=1 EXTRA_CFLAGS='-Og' bench/epoll-ctl.c: In function ‘do_threads’: bench/epoll-ctl.c:274:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret; ^~~ ... Signed-off-by: -
Changbin Du authored
Detected via gcc's ASan: Direct leak of 2048 byte(s) in 64 object(s) allocated from: 6 #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370) 7 #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43 8 #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85 9 #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250 10 #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382 11 #5 0x556b0f0e3231 in print_events util/parse-events.c:2514 12 #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 13 #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 14 #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 15 #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 16 #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520 17 #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: -
Changbin Du authored
AddressSanitizer (or ASan) and UndefinedBehaviorSanitizer (or UBSan) are very useful tools to detect program bugs: - AddressSanitizer (or ASan) is a GCC feature that detects memory corruption bugs such as buffer overflows and memory leaks. - UndefinedBehaviorSanitizer (or UBSan) is a fast undefined behavior detector supported by GCC. UBSan detects undefined behaviors of programs at runtime. This patch adds a document about how to use them on perf. Later patches will fix some of the issues disclosed by them. Signed-off-by:
-
Mamatha Inamdar authored
This patch is to remove following hardware events from JSON file which are not supported on POWER8. pm_co_disp_fail pm_co_tm_sc_footprint pm_iside_disp pm_iside_disp_fail pm_iside_disp_fail_other pm_iside_mru_touch pm_l2_castout_mod pm_l2_castout_shr pm_l2_dc_inv pm_l2_disp_all_l2miss pm_l2_grp_guess_correct pm_l2_grp_guess_wrong pm_l2_ic_inv pm_l2_inst pm_l2_inst_miss pm_l2_ld pm_l2_ld_disp pm_l2_ld_hit pm_l2_ld_miss pm_l2_loc_guess_correct pm_l2_loc_guess_wrong pm_l2_rcld_disp pm_l2_rcld_disp_fail_addr pm_l2_rcld_disp_fail_other pm_l2_rcst_disp pm_l2_rcst_disp_fail_addr pm_l2_rcst_disp_fail_other pm_l2_rc_st_done pm_l2_rty_ld pm_l2_sn_m_rd_done pm_l2_sn_m_wr_done pm_l2_sn_sx_i_done pm_l2_st_disp pm_l2_st_hit pm_l2_sys_guess_correct pm_l2_sys_guess_wrong pm_l2_sys_pump pm_l3_ci_hit pm_l3_ci_miss pm_l3_cinj pm_l3_co pm_l3_co_lco pm_l3_grp_guess_correct pm_l3_grp_guess_wrong_high pm_l3_grp_guess_wrong_low pm_l3_hit pm_l3_l2_co_hit pm_l3_l2_co_miss pm_l3_lat_ci_hit pm_l3_lat_ci_miss pm_l3_ld_hit pm_l3_ld_miss pm_l3_loc_guess_correct pm_l3_loc_guess_wrong pm_l3_miss pm_l3_p0_co_l31 pm_l3_p0_co_mem pm_l3_p0_co_rty pm_l3_p0_grp_pump pm_l3_p0_lco_data pm_l3_p0_lco_no_data pm_l3_p0_lco_rty pm_l3_p0_node_pump pm_l3_p0_pf_rty pm_l3_p0_sn_hit pm_l3_p0_sn_inv pm_l3_p0_sn_miss pm_l3_p0_sys_pump pm_l3_p1_co_l31 pm_l3_p1_co_mem pm_l3_p1_co_rty pm_l3_p1_grp_pump pm_l3_p1_lco_data pm_l3_p1_lco_no_data pm_l3_p1_lco_rty pm_l3_p1_node_pump pm_l3_p1_pf_rty pm_l3_p1_sn_hit pm_l3_p1_sn_inv pm_l3_p1_sn_miss pm_l3_p1_sys_pump pm_l3_pf_hit_l3 pm_l3_sys_guess_correct pm_l3_sys_guess_wrong pm_l3_trans_pf pm_l3_wi0_busy pm_l3_wi_usage pm_non_tm_rst_sc pm_rd_clearing_sc pm_rd_forming_sc pm_rd_hit_pf pm_snp_tm_hit_m pm_snp_tm_hit_t pm_st_caused_fail pm_tm_cam_overflow pm_tm_cap_overflow pm_tm_fav_caused_fail pm_tm_ld_caused_fail pm_tm_ld_conf pm_tm_rst_sc pm_tm_sc_co pm_tm_st_caused_fail pm_tm_st_conf Signed-off-by:
Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Acked-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: 2a81fa3b ("perf vendor events: Add power8 PMU events") Link: http://lkml.kernel.org/r/154953186583.11022.14819560028300370163.stgit@localhost.localdomainSigned-off-by:
-
Andi Kleen authored
The multiplexing scaling in perf stat mysteriously adds 0.5 to the value. This dates back to the original perf tool. Other scaling code doesn't use that strange convention. Remove the extra 0.5. Before: $ perf stat -e 'cycles,cycles,cycles,cycles,cycles,cycles' grep -rq foo Performance counter stats for 'grep -rq foo': 6,403,580 cycles (81.62%) 6,404,341 cycles (81.64%) 6,402,983 cycles (81.62%) 6,399,941 cycles (81.63%) 6,399,451 cycles (81.62%) 6,436,105 cycles (91.87%) 0.005843799 seconds time elapsed 0.002905000 seconds user 0.002902000 seconds sys After: $ perf stat -e 'cycles,cycles,cycles,cycles,cycles,cycles' grep -rq foo Performance counter stats for 'grep -rq foo': 6,422,704 cycles (81.68%) 6,401,842 cycles (81.68%) 6,398,432 cycles (81.68%) 6,397,098 cycles (81.68%) 6,396,074 cycles (81.67%) 6,434,980 cycles (91.62%) 0.005884437 seconds time elapsed 0.003580000 seconds user 0.002356000 seconds sys Signed-off-by:Andi Kleen <ak@linux.intel.com> Acked-by:
-
Andi Kleen authored
The -c option to enable multiplex scaling has been useless for quite some time because scaling is default. It's only useful as --no-scale to disable scaling. But the non scaling code path has bitrotted and doesn't print anything because perf output code relies on value run/ena information. Also even when we don't want to scale a value it's still useful to show its multiplex percentage. This patch: - Fixes help and documentation to show --no-scale instead of -c - Removes -c, only keeps the long option because -c doesn't support negatives. - Enables running/enabled even with --no-scale - And fixes some other problems in the no-scale output. Before: $ perf stat --no-scale -e cycles true Performance counter stats for 'true': <not counted> cycles 0.000984154 seconds time elapsed After: $ ./perf stat --no-scale -e cycles true Performance counter stats for 'true': 706,070 cycles 0.001219821 seconds time elapsed Signed-off-by: -
Andi Kleen authored
When comparing time stamps in 'perf script' traces it can be annoying to work with the full perf time stamps. Add a --reltime option that displays time stamps relative to the trace start to make it easier to read the traces. Note: not currently supported for --time. Report an error in this case. Before: % perf script swapper 0 [000] 245402.891216: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 245402.891223: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 245402.891227: 5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 245402.891231: 41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms]) swapper 0 [000] 245402.891235: 355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms]) swapper 0 [000] 245402.891239: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms]) After: % perf script --reltime swapper 0 [000] 0.000000: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 0.000006: 1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 0.000010: 5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms]) swapper 0 [000] 0.000014: 41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms]) swapper 0 [000] 0.000018: 355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms]) swapper 0 [000] 0.000022: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms]) Committer notes: Do not use 'time' as the name of a variable, as this breaks the build on older glibcs: cc1: warnings being treated as errors builtin-script.c: In function 'perf_sample__fprintf_start': builtin-script.c:691: warning: declaration of 'time' shadows a global declaration /usr/include/time.h:187: warning: shadowed declaration is here Signed-off-by: -
Andi Kleen authored
Print [TID] tid %d instead of the crypted /tmp/perf-%d.map default. % cat >loop.java public class loop { public static void main(String[] args) { for (;;); } } ^D % javac loop.java % perf record java loop ^C Before: % perf report --stdio ... 56.09% java perf-34724.map [.] 0x00007fd5bd021896 19.12% java perf-34724.map [.] 0x00007fd5bd021887 9.79% java perf-34724.map [.] 0x00007fd5bd021783 8.97% java perf-34724.map [.] 0x00007fd5bd02175b After: % perf report --stdio ... 56.09% java [JIT] tid 34724 [.] 0x00007fd5bd021896 19.12% java [JIT] tid 34724 [.] 0x00007fd5bd021887 9.79% java [JIT] tid 34724 [.] 0x00007fd5bd021783 8.97% java [JIT] tid 34724 [.] 0x00007fd5bd02175b Signed-off-by: -
Andi Kleen authored
Show all the supported sort keys in the command line help output, so that it's not needed to refer to the manpage. Before: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list. After: % perf report -h ... -s, --sort <key[,key2...]> sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ... Signed-off-by: -
Andi Kleen authored
The help description for --switch-output looks like there are multiple comma separated fields. But it's actually a choice of different options. Make it clear and less confusing. Before: % perf record -h ... --switch-output[=<signal,size,time>] Switch output when receive SIGUSR2 or cross size,time threshold After: % perf record -h ... --switch-output[=<signal or size[BKMG] or time[smhd]>] Switch output when receiving SIGUSR2 (signal) or cross a size or time threshold Signed-off-by:
-
