- 12 Jan, 2017 40 commits
-
-
Jérémy Lefaure authored
commit 5563bb57 upstream. The function bfin_fifo_offset is defined but not used: drivers/usb/musb/blackfin.c:36:12: warning: ‘bfin_fifo_offset’ defined but not used [-Wunused-function] static u32 bfin_fifo_offset(u8 epnum) ^~~~~~~~~~~~~~~~ Adding bfin_fifo_offset to bfin_ops fixes this warning and allows musb core to call this function instead of default_fifo_offset. Fixes: cc92f681 ("usb: musb: Populate new IO functions for blackfin") Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit 3bc02bce upstream. If CONFIG_PM=n: drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here To fix this, move hub_port_disable() after hub_usb3_port_prepare_disable(), and adjust forward declarations. Fixes: 37be6676 ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Lindgren authored
commit 8c300fe2 upstream. When unloading omap2430, we can get the following splat: WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8 Trying to free already-free IRQ 4 ... [<c01a8b78>] (free_irq) from [<bf0aea84>] (musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc]) [<bf0aea84>] (musbhs_dma_controller_destroy [musb_hdrc]) from [<bf09f88c>] (musb_remove+0xf0/0x12c [musb_hdrc]) [<bf09f88c>] (musb_remove [musb_hdrc]) from [<c056a384>] (platform_drv_remove+0x24/0x3c) ... This is because the irq number in use is 260 nowadays, and the dma controller is using u8 instead of int. Fixes: 6995eb68 ("USB: musb: enable low level DMA operation for Blackfin") Signed-off-by:
Tony Lindgren <tony@atomide.com> [b-liu@ti.com: added Fixes tag] Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
commit 8f8983a5 upstream. Intel Gemini Lake SoC has the same DWC3 than Broxton. Add the new ID to the supported Devices. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
OGAWA Hirofumi authored
commit 1c111b6c upstream. Current abort operation has race. xhci_handle_command_timeout() xhci_abort_cmd_ring() xhci_write_64(CMD_RING_ABORT) xhci_handshake(5s) do { check CMD_RING_RUNNING udelay(1) ... COMP_CMD_ABORT event COMP_CMD_STOP event xhci_handle_stopped_cmd_ring() restart cmd_ring CMD_RING_RUNNING become 1 again } while () return -ETIMEDOUT xhci_write_64(CMD_RING_ABORT) /* can abort random command */ To do abort operation correctly, we have to wait both of COMP_CMD_STOP event and negation of CMD_RING_RUNNING. But like above, while timeout handler is waiting negation of CMD_RING_RUNNING, event handler can restart cmd_ring. So timeout handler never be notice negation of CMD_RING_RUNNING, and retry of CMD_RING_ABORT can abort random command (BTW, I guess retry of CMD_RING_ABORT was workaround of this race). To fix this race, this moves xhci_handle_stopped_cmd_ring() to xhci_abort_cmd_ring(). And timeout handler waits COMP_CMD_STOP event. At this point, timeout handler is owner of cmd_ring, and safely restart cmd_ring by using xhci_handle_stopped_cmd_ring(). [FWIW, as bonus, this way would be easily extend to add CMD_RING_PAUSE operation] [locks edited as patch is rebased on other locking fixes -Mathias] Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
OGAWA Hirofumi authored
commit cb4d5ce5 upstream. This is preparation to fix abort operation race (See "xhci: Fix race related to abort operation"). To make timeout sleepable, use delayed_work instead of timer. [change a newly added pending timer fix to pending work -Mathias] Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit c95a9f83 upstream. We normally use the passed in gfp flags for allocations, it's just these two which were missed. Fixes: 22d45f01 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()") Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit fde1faf8 upstream. A static usb-serial-driver structure that is used to initialise the interrupt URB was modified during probe depending on the currently probed device type, something which could break a parallel probe of a device of a different type. Fix this up by overriding the default completion callback for MCS7715 devices in attach() instead. We may want to use two usb-serial driver instances for the two types later. Fixes: fb088e33 ("USB: serial: add support for serial port on the moschip 7715") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 75dd211e upstream. Do not submit the interrupt URB until after the parport has been successfully registered to avoid another use-after-free in the completion handler when accessing the freed parport private data in case of a racing completion. Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 91a1ff4d upstream. The interrupt URB was submitted on probe but never stopped on probe errors. This can lead to use-after-free issues in the completion handler when accessing the freed usb-serial struct: Unable to handle kernel paging request at virtual address 6b6b6be7 ... [<bf052e70>] (mos7715_interrupt_callback [mos7720]) from [<c052a894>] (__usb_hcd_giveback_urb+0x80/0x140) [<c052a894>] (__usb_hcd_giveback_urb) from [<c052a9a4>] (usb_hcd_giveback_urb+0x50/0x138) [<c052a9a4>] (usb_hcd_giveback_urb) from [<c0550684>] (musb_giveback+0xc8/0x1cc) Fixes: b69578df ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit b05aebc2 upstream. Fix NULL-pointer dereference at port open if a device lacks the expected bulk in and out endpoints. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf071c20>] (mos7720_open [mos7720]) from [<bf0490e0>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0490e0>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf049d98>] (serial_open+0x48/0x6c [usbserial]) [<bf049d98>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 0f64478c ("USB: add USB serial mos7720 driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 5c75633e upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at mos7840_open+0x88/0x8dc [mos7840] Note that we continue to treat the interrupt-in endpoint as optional for now. Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 21ce5784 upstream. Fix NULL-pointer dereference in write() should the device lack the expected interrupt-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000054 ... PC is at kobil_write+0x144/0x2a0 [kobil_sct] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 3dca0111 upstream. Fix NULL-pointer dereference when clearing halt at open should the device lack a bulk-out endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at cyberjack_open+0x40/0x9c [cyberjack] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 5afeef23 upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at oti6858_open+0x30/0x1d0 [oti6858] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 49cdee0e ("USB: oti6858 usb-serial driver (in Nokia CA-42 cable)") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 0dd40842 upstream. Fix NULL-pointer dereference when initialising URBs at open should a non-EPIC device lack a bulk-in or interrupt-in endpoint. Unable to handle kernel NULL pointer dereference at virtual address 00000028 ... PC is at edge_open+0x24c/0x3e8 [io_edgeport] Note that the EPIC-device probe path has the required sanity checks so this makes those checks partially redundant. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit ef079936 upstream. Fix NULL-pointer dereference in open() should a malicious device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 .. [<bf06a6b0>] (ti_open [ti_usb_3410_5052]) from [<bf02e118>] (serial_port_activate+0x68/0x98 [usbserial]) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit c4ac4496 upstream. Make sure to free the URB transfer buffer in case submission fails (e.g. due to a disconnect). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 90507d54 upstream. Fix NULL-pointer dereference at open should the device lack a bulk-in or bulk-out endpoint: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at iuu_open+0x78/0x59c [iuu_phoenix] Fixes: 07c3b1a1 ("USB: remove broken usb-serial num_endpoints check") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 2330d0a8 upstream. Cancel the heartbeat work on driver unbind in order to avoid I/O after disconnect in case the port is held open. Note that the cancel in release() is still needed to stop the heartbeat after late probe errors. Fixes: 26c78daa ("USB: io_ti: Add heartbeat to keep idle EP/416 ports from disconnecting") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 4f9785cc upstream. In case a device is left in "boot-mode" we must not register any port devices in order to avoid a NULL-pointer dereference on open due to missing endpoints. This could be used by a malicious device to trigger an OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial]) [<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit a323fefc upstream. Fix NULL-pointer dereference when clearing halt at open should a malicious device lack the expected endpoints when in download mode. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf011ed8>] (edge_open [io_ti]) from [<bf000118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf000118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf000da0>] (serial_open+0x48/0x6c [usbserial]) [<bf000da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit cc090924 upstream. Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at spcp8x5_open+0x30/0xd0 [spcp8x5] Fixes: 619a6f1d ("USB: add usb-serial spcp8x5 driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 5d9b0f85 upstream. Check for the expected endpoints in attach() and fail loudly if not present. Note that failing to do this appears to be benign since da280e34 ("USB: keyspan_pda: clean up write-urb busy handling") which prevents a NULL-pointer dereference in write() by never marking a non-existent write-urb as free. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 76ab439e upstream. Fix NULL-pointer dereference in open() should a type-0 or type-1 device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at pl2303_open+0x38/0xec [pl2303] Note that a missing interrupt-in endpoint would have caused open() to fail. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit f09d1886 upstream. The write URB was being killed using the synchronous interface while holding a spin lock in close(). Simply drop the lock and busy-flag update, something which would have been taken care of by the completion handler if the URB was in flight. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit a5bc0194 upstream. Fix NULL-pointer dereferences at open() and disconnect() should the device lack the expected bulk-out endpoints: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [c0170ff0>] (__lock_acquire) from [<c0172f00>] (lock_acquire+0x108/0x264) [<c0172f00>] (lock_acquire) from [<c06a5090>] (_raw_spin_lock_irqsave+0x58/0x6c) [<c06a5090>] (_raw_spin_lock_irqsave) from [<c0470684>] (tty_port_tty_set+0x28/0xa4) [<c0470684>] (tty_port_tty_set) from [<bf08d384>] (omninet_open+0x30/0x40 [omninet]) [<bf08d384>] (omninet_open [omninet]) from [<bf07c118>] (serial_port_activate+0x68/0x98 [usbserial]) Unable to handle kernel NULL pointer dereference at virtual address 00000234 ... [<bf01f418>] (omninet_disconnect [omninet]) from [<bf0016c0>] (usb_serial_disconnect+0xe4/0x100 [usbserial]) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
commit 4dea7077 upstream. In command timer function, xhci_handle_command_timeout(), xhci->lock is unlocked before call into xhci_abort_cmd_ring(). This might cause race between the timer function and the event handler. The xhci_abort_cmd_ring() function sets the CMD_RING_ABORT bit in the command register and polling it until the setting takes effect. A stop command ring event might be handled between writing the abort bit and polling for it. The event handler will restart the command ring, which causes the failure of polling, and we ever believed that we failed to stop it. As a bonus, this also fixes some issues of calling functions without locking in xhci_handle_command_timeout(). Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit a5a1b951 upstream. If we get a command completion event at the same time as the command timeout work starts on another cpu we might end up aborting the wrong command. If the command completion takes the xhci lock before the timeout work, it will handle the command, pick the next command, mark it as current_cmd, and re-queue the timeout work. When the timeout work finally gets the lock It will start aborting the wrong command. This case can be resolved by checking if the timeout work is pending inside the timeout function itself. A new timeout work can only be pending if the command completed and a new command was queued. If there are no more commands pending then command completion will set the current_cmd to NULL, which is already handled in the timeout work. Reported-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baolin Wang authored
commit 2a7cfdf3 upstream. When current command was supposed to be aborted, host will free the command in handle_cmd_completion() function. But it might be still referenced by xhci->current_cmd, which need to set NULL. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
commit 90797aee upstream. xhci_setup_device() should return failure with correct error number when xhci host has died, removed or halted. During usb device enumeration, if usb host is not accessible (died, removed or halted), the hc_driver->address_device() should return a corresponding error code to usb core. But current xhci driver just returns success. This misleads usb core to continue the enumeration by reading the device descriptor, which will result in failure, and users will get a misleading message like "device descriptor read/8, error -110". Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit ee8665e2 upstream. the tt_info provided by a HS hub might be in use to by a child device Make sure we free the devices in the correct order. This is needed in special cases such as when xhci controller is reset when resuming from hibernate, and all virt_devices are freed. Also free the virt_devices starting from max slot_id as children more commonly have higher slot_id than parent. Reported-by:
Guenter Roeck <groeck@chromium.org> Tested-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wan Ahmad Zainie authored
commit 6c97cfc1 upstream. Intel Apollo Lake also requires XHCI_PME_STUCK_QUIRK. Adding its PCI ID to quirk. Signed-off-by:
Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 346e9973 upstream. If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
commit 2b985467 upstream. handle_cmd_completion() frees a command structure which might be still referenced by xhci->current_cmd. This might cause problem when xhci->current_cmd is accessed after that. A real-life case could be like this. The host takes a very long time to respond to a command, and the command timer is fired at the same time when the command completion event arrives. The command completion handler frees xhci->current_cmd before the timer function can grab xhci->lock. Afterward, timer function grabs the lock and go ahead with checking and setting members of xhci->current_cmd. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
commit e71d363d upstream. Now that we're handling so many transfers at a time and for some dwc3 revisions LPM events *must* be enabled, we can fall into a situation where too many events fire and we start receiving Overflow events. Let's do what XHCI does and allocate a full page for the Event Ring, this will avoid any future issues. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Opasiak authored
commit 7e4da3fc upstream. By convention (according to doc) if function does not provide get_alt() callback composite framework should assume that it has only altsetting 0 and should respond with error if host tries to set other one. After commit dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") we started checking set_alt() callback instead of get_alt(). This check is useless as we check if set_alt() is set inside usb_add_function() and fail if it's NULL. Let's fix this check and move comment about why we check the get method instead of set a little bit closer to prevent future false fixes. Fixes: dd4dff8b ("USB: composite: Fix bug: should test set_alt function pointer before use it") Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit bcdbeb84 upstream. The stop_activity() routine in dummy-hcd is supposed to unlink all active requests for every endpoint, among other things. But it doesn't handle ep0. As a result, fuzz testing can generate a WARNING like the following: WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170 Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357 This patch fixes the problem by iterating over all the endpoints in the driver's ep array instead of iterating over the gadget's ep_list, which explicitly leaves out ep0. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 0a8fd134 upstream. When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 1c069b05 upstream. Andrey Konovalov's fuzz testing of gadgetfs showed that we should improve the driver's checks for valid configuration descriptors passed in by the user. In particular, the driver needs to verify that the wTotalLength value in the descriptor is not too short (smaller than USB_DT_CONFIG_SIZE). And the check for whether wTotalLength is too large has to be changed, because the driver assumes there is always enough room remaining in the buffer to hold a device descriptor (at least USB_DT_DEVICE_SIZE bytes). This patch adds the additional check and fixes the existing check. It may do a little more than strictly necessary, but one extra check won't hurt. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-