- 17 Jun, 2012 39 commits
-
-
Chris Wilson authored
commit 3eef8918 upstream. By correctly describing the rinbuffers as being in the GTT domain, it appears that we are more careful with the management of the CPU cache upon resume and so prevent some coherency issue when submitting commands to the GPU later. A secondary effect is that the debug logs are then consistent with the actual usage (i.e. they no longer describe the ringbuffers as being in the CPU write domain when we are accessing them through an wc iomapping.) Reported-and-tested-by:
Daniel Gnoutcheff <daniel@gnoutcheff.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41092Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jerome Glisse authored
commit d2609875 upstream. Fix regresson since the introduction of command stream checking on evergreen (thread referenced below). Issue is cause by ddx allocating bo with formula width*height*bpp while programming the GPU command stream with ALIGN(height, 8). In some case (where page alignment does not hide the extra size bo should be according to height alignment) the kernel will reject the command stream. This patch reprogram the command stream to slice - 1 (slice is a derivative value from height) which avoid rejecting the command stream while keeping the value of command stream checking from a security point of view. This patch also fix wrong computation of layer size for 2D tiled surface. Which should fix issue when 2D color tiling is enabled. This dump the radeon KMS_DRIVER_MINOR so userspace can know if they are on a fixed kernel or not. https://lkml.org/lkml/2012/6/3/80 https://bugs.freedesktop.org/show_bug.cgi?id=50892 https://bugs.freedesktop.org/show_bug.cgi?id=50857 !!! STABLE need a custom version of this patch for 3.4 !!! v2: actually bump the minor version and add comment about stable v3: do compute the height the ddx was trying to use [airlied: drop left over debug] Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dimitri Sivanich authored
commit a841f8ce upstream. It does not get processed because sched_domain_level_max is 0 at the time that setup_relax_domain_level() is run. Simply accept the value as it is, as we don't know the value of sched_domain_level_max until sched domain construction is completed. Fix sched_relax_domain_level in cpuset. The build_sched_domain() routine calls the set_domain_attribute() routine prior to setting the sd->level, however, the set_domain_attribute() routine relies on the sd->level to decide whether idle load balancing will be off/on. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alan Cox authored
commit cfb46f43 upstream. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Alan Cox authored
commit 155689de upstream. We are not yet ready for this and it makes a mess on some devices. Signed-off-by:
-
AnilKumar Ch authored
commit f461f27a upstream. Fix the issue of C_CAN interrupts getting disabled forever when canconfig utility is used multiple times. According to NAPI usage we disable all the hardware interrupts in ISR and re-enable them in poll(). Current implementation calls napi_enable() after hardware interrupts are enabled. If we get any interrupts between these two steps then we do not process those interrupts because napi is not enabled. Mostly these interrupts come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable() happens before HW interrupts enabled then c_can_poll() function will be called eventual re-enabling. This patch moves the napi_enable() call before interrupts enabled. Signed-off-by:
AnilKumar Ch <anilkumar@ti.com> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
AnilKumar Ch authored
commit 148c87c8 upstream. This patch fixes an interrupt thrash issue with c_can driver. In c_can_isr() function interrupts are disabled and enabled only in c_can_poll() function. c_can_isr() & c_can_poll() both read the irqstatus flag. However, irqstatus is always read as 0 in c_can_poll() because all C_CAN interrupts are disabled in c_can_isr(). This causes all interrupts to be re-enabled in c_can_poll() which in turn causes another interrupt since the event is not really handled. This keeps happening causing a flood of interrupts. To fix this, read the irqstatus register in isr and use the same cached value in the poll function. Signed-off-by:
-
AnilKumar Ch authored
commit 617cacce upstream. This patch fixes an issue with transmit routine, which causes "can_put_echo_skb: BUG! echo_skb is occupied!" message when using "cansequence -p" on D_CAN controller. In c_can driver, while transmitting packets tx_echo flag holds the no of can frames put for transmission into the hardware. As the comment above c_can_do_tx() indicates, if we find any packet which is not transmitted then we should stop looking for more. In the current implementation this is not taken care of causing the said message. Also, fix the condition used to find if the packet is transmitted or not. Current code skips the first tx message object and ends up checking one extra invalid object. While at it, fix the comment on top of c_can_do_tx() to use the terminology "packet" instead of "package" since it is more standard. Signed-off-by:
-
Bjørn Mork authored
commit dd03cff2 upstream. Adding device IDs for Aircard 320U and two other devices found in the out-of-tree version of this driver. Cc: linux@sierrawireless.com Cc: Autif Khan <autif.mlist@gmail.com> Cc: Tom Cassidy <tomas.cassidy@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xose Vazquez Perez authored
commit e828b9fb upstream. found in 2012_03_22_RT5572_Linux_STA_v2.6.0.0_DPO RT3070: (0x2019,0x5201) Planex Communications, Inc. RT8070 (0x7392,0x4085) 2L Central Europe BV 8070 7392 is Edimax RT35xx: (0x1690,0x0761) Askey was Fujitsu Stylistic 550, but 1690 is Askey Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Xose Vazquez Perez authored
commit 63b37641 upstream. They were taken from ralink drivers: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO 2012_03_22_RT5572_Linux_STA_v2.6.0.0_DPO 0x1eda,0x2210 RT3070 Airties 0x083a,0xb511 RT3370 Panasonic 0x0471,0x20dd RT3370 Philips 0x1690,0x0764 RT35xx Askey 0x0df6,0x0065 RT35xx Sitecom 0x0df6,0x0066 RT35xx Sitecom 0x0df6,0x0068 RT35xx Sitecom 0x2001,0x3c1c RT5370 DLink 0x2001,0x3c1d RT5370 DLink 2001 is D-Link not Alpha Signed-off-by:
-
Stanislaw Gruszka authored
commit e5851dac upstream. Remove spinlock as atomic_t can be used instead. Note we use only 16 lower bits, upper bits are changed but we impilcilty cast to u16. This fix possible deadlock on IBSS mode reproted by lockdep: ================================= [ INFO: inconsistent lock state ] 3.4.0-wl+ #4 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] {IN-SOFTIRQ-W} state was registered at: [<c04978ab>] __lock_acquire+0x47b/0x1050 [<c0498504>] lock_acquire+0x84/0xf0 [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib] [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib] [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211] [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211] [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211] [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211] [<c0782e87>] dev_hard_start_xmit+0x307/0x660 [<c079bb71>] sch_direct_xmit+0xa1/0x1e0 [<c0784bb3>] dev_queue_xmit+0x183/0x730 [<c078c27a>] neigh_resolve_output+0xfa/0x1e0 [<c07b436a>] ip_finish_output+0x24a/0x460 [<c07b4897>] ip_output+0xb7/0x100 [<c07b2d60>] ip_local_out+0x20/0x60 [<c07e01ff>] igmpv3_sendpack+0x4f/0x60 [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330 [<c04520fc>] run_timer_softirq+0x15c/0x2f0 [<c0449e3e>] __do_softirq+0xae/0x1e0 irq event stamp: 18380437 hardirqs last enabled at (18380437): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0 hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0 softirqs last enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0 softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&intf->seqlock)->rlock); <Interrupt> lock(&(&intf->seqlock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:2/30374: #0: (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #1: ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #2: (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211] #3: (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib] stack backtrace: Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4 Call Trace: [<c04962a6>] print_usage_bug+0x1f6/0x220 [<c0496a12>] mark_lock+0x2c2/0x300 [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0 [<c04978ec>] __lock_acquire+0x4bc/0x1050 [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0 [<c0777fb6>] ? copy_skb_header+0x26/0x90 [<c0498504>] lock_acquire+0x84/0xf0 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib] [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib] [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib] [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib] [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211] [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211] [<c0496ab4>] ? mark_held_locks+0x64/0xc0 [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50 [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211] [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211] [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10 [<c077683b>] ? skb_dequeue+0x4b/0x70 [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211] [<c045cf99>] ? process_one_work+0x109/0x3f0 [<c045d015>] process_one_work+0x185/0x3f0 [<c045cf99>] ? process_one_work+0x109/0x3f0 [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211] [<c045ed86>] worker_thread+0x116/0x270 [<c045ec70>] ? manage_workers+0x1e0/0x1e0 [<c0462f64>] kthread+0x84/0x90 [<c0462ee0>] ? __init_kthread_worker+0x60/0x60 [<c083d382>] kernel_thread_helper+0x6/0x10 Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
-
Johannes Berg authored
commit 463454b5 upstream. If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Reported-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
David Henningsson authored
commit edfe3bfc upstream. Pin 0x1b was connected to the front panel connector, which according to the HDA standard should contain a mic and a headphone. In this case, the headphone was listed as "line out" by BIOS. BugLink: https://bugs.launchpad.net/bugs/993162Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Seth Forshee authored
commit 69aaedd3 upstream. MacBook Pro models with BCM4331 wireless have been found to have the ext PA lines disabled after resuming from S3 without external power attach. This causes them to be unable to transmit. Add a workaround to ensure that the ext PA lines are enabled on BCM4331. Also extend all handling of ext PA line muxing to BCM43431 as is done in the Broadcom SDK. BugLink: http://bugs.launchpad.net/bugs/925577 Cc: Arend van Spriel <arend@broadcom.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Mark Brown authored
commit bfd37bb5 upstream. Volume updates may not be acted upon if there is no clock applied when the volume update is written. Ensure this doesn't happen by writing out registers with volume updates after we enable each of the clocks. There are more registers updated than before as previously we were relying on wm_hubs to set those for controls it manages. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit c8fdc1b5 upstream. Ensure that all the actions get taken at appropriate times by calling the _PRE and _POST events for the aifNclk_ev functions explicitly. Signed-off-by:
-
Arik Nemtsov authored
commit 794454ce upstream. sta_info_cleanup locks the sta_list using rcu_read_lock however the delete operation isn't rcu safe. A race between sta_info_cleanup timer being called and a STA being removed can occur which leads to a panic while traversing sta_list. Fix this by switching to the RCU-safe versions. Reported-by:
Eyal Shapira <eyal@wizery.com> Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Johannes Berg authored
commit 71ecfa18 upstream. When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Reported-by:
Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by:
-
Meenakshi Venkataraman authored
commit bd34ab62 upstream. As part of hardware reconfig mac80211 tries to restore the station state to its values before the hardware reconfig, but it only goes to the last-state - 1. Fix this off-by-one error. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit d012d04e upstream. This feature has been reported to be buggy and enabled by default. We therefore need to disable it manually. Signed-off-by:
-
Emmanuel Grumbach authored
commit d6ee27eb upstream. When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. The message is the log that was printed is: Queue 2 stuck for 10000ms This doesn't seem to fix the higher queues that get stuck from time to time. Reviewed-by:
-
Johannes Berg authored
commit 0e1fa7ef upstream. Otherwise the LEDs stick around and cause issues the next time around since they're still there but not really hooked up. Signed-off-by:
-
Johannes Berg authored
commit fcb6ff5e upstream. If CONFIG_PM_SLEEP is disabled, then iwlwifi doesn't support suspend/resume handlers and thus mac80211 (correctly) refuses advertising WoWLAN. Disable WoWLAN in the driver in this case. Reported-by:
Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by:
-
Josef Bacik authored
commit 2adcac1a upstream. If cow_file_range_inline fails with ENOSPC we abort the transaction which isn't very nice. This really shouldn't be happening anyways but there's no sense in making it a horrible error when we can easily just go allocate normal data space for this stuff. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Acked-by:
Chris Mason <chris.mason@fusionio.com> Cc: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by:
-
Thomas Hellstrom authored
commit a393c730 upstream. A regression was introduced in the 3.3 rc series, commit "drm/ttm: simplify memory accounting for ttm user v2", causing the metadata of buffer objects created using the ttm_bo_create() function to be accounted twice. That causes massive leaks with the vmwgfx driver running for example SpecViewperf Catia-03 test 2, eventually killing the app. Furthermore, the same commit introduces a regression where metadata accounting is leaked if a buffer object is initialized with an illegal size. This is also fixed with this commit. v2: Fixed an error path and removed an unused variable. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Mathias Krause authored
commit 7c8d5184 upstream. The 32 bit variant of cbc(aes) decrypt is using instructions requiring 128 bit aligned memory locations but fails to ensure this constraint in the code. Fix this by loading the data into intermediate registers with load unaligned instructions. This fixes reported general protection faults related to aesni. References: https://bugzilla.kernel.org/show_bug.cgi?id=43223Reported-by:
Daniel <garkein@mailueberfall.de> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Peter Korsgaard authored
commit 121daad8 upstream. Data valid gets cleared by reading the ISR (status register) and NOT from reading ODATA (data register). A new data word can become available between checking ISR and reading ODATA, causing us to reuse the same data word next time atmel_trng_read() gets called, if that happens before the following data word is ready. With this fixed, rngtest no longer complains of 'Continous run' errors. Before: rngtest -c 1000 < /dev/hwrng rngtest 3 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warr. rngtest: starting FIPS tests... rngtest: bits received from input: 20000032 rngtest: FIPS 140-2 successes: 923 rngtest: FIPS 140-2 failures: 77 rngtest: FIPS 140-2(2001-10-10) Monobit: 0 rngtest: FIPS 140-2(2001-10-10) Poker: 0 rngtest: FIPS 140-2(2001-10-10) Runs: 1 rngtest: FIPS 140-2(2001-10-10) Long run: 0 rngtest: FIPS 140-2(2001-10-10) Continuous run: 76 rngtest: input channel speed: (min=721.402; avg=46003.510; max=49321.338)Kibitss rngtest: FIPS tests speed: (min=11.442; avg=12.714; max=12.801)Mibits/s rngtest: Program run time: 1931860 microseconds After: rngtest -c 1000 < /dev/hwrng rngtest 3 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warr. rngtest: starting FIPS tests... rngtest: bits received from input: 20000032 rngtest: FIPS 140-2 successes: 1000 rngtest: FIPS 140-2 failures: 0 rngtest: FIPS 140-2(2001-10-10) Monobit: 0 rngtest: FIPS 140-2(2001-10-10) Poker: 0 rngtest: FIPS 140-2(2001-10-10) Runs: 0 rngtest: FIPS 140-2(2001-10-10) Long run: 0 rngtest: FIPS 140-2(2001-10-10) Continuous run: 0 rngtest: input channel speed: (min=777.518; avg=36988.482; max=43115.342)Kibitss rngtest: FIPS tests speed: (min=11.951; avg=12.715; max=12.887)Mibits/s rngtest: Program run time: 2035543 microseconds Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Reported-by:
George Pontis <GPontis@z9.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Borislav Petkov authored
commit f227d430 upstream. Currently, the APIC LVT interrupt for error thresholding is implicitly enabled. However, there are models in the F15h range which do not enable it. Make the code machinery which sets up the APIC interrupt support an optional setting and add an ->interrupt_capable member to the bank representation mirroring that capability and enable the interrupt offset programming only if it is true. Simplify code and fixup comment style while at it. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Cliff Wickman authored
commit d5d2d2ee upstream. The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for tlb-shootdown (selective broadcast mode) always uses UV2 broadcast descriptor format. There is no need to clear the 'legacy' (UV1) mode, because the hardware always uses UV2 mode for selective broadcast. But the BIOS uses general broadcast and legacy mode, and the hardware pays attention to the legacy mode bit for general broadcast. So the kernel must not clear that mode bit. Signed-off-by:
Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.comSigned-off-by:
-
Theodore Ts'o authored
commit b0dd6b70 upstream. Ext3 filesystems that are converted to use as many ext4 file system features as possible will enable uninit_bg to speed up e2fsck times. These file systems will have a native ext3 layout of inode tables and block allocation bitmaps (as opposed to ext4's flex_bg layout). Unfortunately, in these cases, when first allocating a block in an uninitialized block group, ext4 would incorrectly calculate the number of free blocks in that block group, and then errorneously report that the file system was corrupt: EXT4-fs error (device vdd): ext4_mb_generate_buddy:741: group 30, 32254 clusters in bitmap, 32258 in gd This problem can be reproduced via: mke2fs -q -t ext4 -O ^flex_bg /dev/vdd 5g mount -t ext4 /dev/vdd /mnt fallocate -l 4600m /mnt/test The problem was caused by a bone headed mistake in the check to see if a particular metadata block was part of the block group. Many thanks to Kees Cook for finding and bisecting the buggy commit which introduced this bug (commit fd034a84, present since v3.2). Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Tested-by:
-
John Stultz authored
commit fad0c66c upstream. Commit 6b43ae8a (ntp: Fix leap-second hrtimer livelock) broke the leapsecond update of CLOCK_MONOTONIC. The missing leapsecond update to wall_to_monotonic causes discontinuities in CLOCK_MONOTONIC. Adjust wall_to_monotonic when NTP inserted a leapsecond. Reported-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Rusty Russell authored
commit ae82fdb1 upstream. Commit 026cee00 "params: <level>_initcall-like kernel parameters" set old-style module parameters to level 0. And we call those level 0 calls where we used to, early in start_kernel(). We also loop through the initcall levels and call the levelled module_params before the corresponding initcall. Unfortunately level 0 is early_init(), so we call the standard module_param calls twice. (Turns out most things don't care, but at least ubi.mtd does). Change the level to -1 for standard module_param calls. Reported-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Steffen Rumler authored
commit 3c752965 upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by:
Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
commit 860aed25 upstream. This reverts 68568add ("powerpc/time: Remove unnecessary sanity check of decrementer expiration"). We do need to check whether we have reached the expiration time of the next event, because we sometimes get an early decrementer interrupt, most notably when we set the decrementer to 1 in arch_irq_work_raise(). The effect of not having the sanity check is that if timer_interrupt() gets called early, we leave the decrementer set to its maximum value, which means we then don't get any more decrementer interrupts for about 4 seconds (or longer, depending on timebase frequency). I saw these pauses as a consequence of getting a stray hypervisor decrementer interrupt left over from exiting a KVM guest. This isn't quite a straight revert because of changes to the surrounding code, but it restores the same algorithm as was previously used. Acked-by:
Anton Blanchard <anton@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Roland Dreier authored
commit cbf8ae32 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by:
Roland Dreier <roland@purestorage.com> Acked-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eugeni Dodonov authored
commit 67384fe3 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381Signed-off-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
-
Chris Wilson authored
commit c3b20037 upstream. When we reset the ring control registers, including the HEAD and TAIL of the ring, we also need to reset associated state. In this instance, we were failing to reset the cached value of ring->last_retired_head and so upon the first request for more space following a resume would potentially (depending on a narrow race window) believe that the HEAD had advanced much further than reality. This is a regression from: commit a71d8d94 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 15 11:25:36 2012 +0000 drm/i915: Record the tail at each request and use it to estimate the head Signed-off-by:
-
Ben Skeggs authored
commit a6a17859 upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
- 09 Jun, 2012 1 commit
-
-
Greg Kroah-Hartman authored
-
