- 27 Sep, 2006 40 commits
-
-
Alan Stern authored
We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by:
-
Alan Stern authored
The UHCI controller in my laptop takes longer to turn off the Resume-Detect bit than the 4 us allowed by uhci-hcd. Presumably other computers will have the same problem. This patch (as752) increases the maximum delay to 10 us, which should be plenty, and uses polling to avoid penalizing systems which can turn the bit off more quickly. Signed-off-by:
-
Aleksey Gorelov authored
If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by:
Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Milan Svoboda authored
I spotted this during my tests with -rt on arm. The -rt patch contains some better tools to diagnose problems with locks and some other things... Original code tries to take semaphore in BUG_ON and then free the memory with this semaphore. Signed-off-by:
Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Milan Svoboda authored
Add poll() support to gadgetfs ep0 Signed-off-by:
-
dave rientjes authored
The size of struct nc_trailer is inherently the newtailroom pad. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Luiz Fernando N. Capitulino authored
These functions makes USB driver's code simpler when dealing with endpoints by avoiding them from accessing the endpoint's descriptor structure directly when they only need to know the endpoint's transfer type and/or direction. Please, read each functions' documentation in order to know how to use them. Signed-off-by:
-
Jesper Juhl authored
include/linux/usb.h causes a lot of -Wshadow warnings - fix them. include/linux/usb.h:901: warning: declaration of 'complete' shadows a global declaration include/linux/completion.h:52: warning: shadowed declaration is here include/linux/usb.h:932: warning: declaration of 'complete' shadows a global declaration include/linux/completion.h:52: warning: shadowed declaration is here include/linux/usb.h:967: warning: declaration of 'complete' shadows a global declaration include/linux/completion.h:52: warning: shadowed declaration is here Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Making structs const prevents accidental bugs and with the proper debug options they're protected against corruption. Signed-off-by:
-
Ben Williamson authored
This driver is glue between the USB gadget interface and the ALSA MIDI interface. It allows us to appear as a MIDI Streaming device to a host system on the other end of a USB cable. This includes linux/usb/audio.h and linux/usb/midi.h containing definitions from the relevant USB specifications for USB audio and USB MIDI devices. The following changes have been made since the first RFC posting: * Bug fixes to endpoint handling. * Workaround for USB_REQ_SET_CONFIGURATION handling, not understood yet. * Added SND and SND_RAWMIDI dependencies in Kconfig. * Moved usb_audio.h and usb_midi.h to usb/*.h * Added module parameters for ALSA card index and id. * Added module parameters for USB descriptor IDs and strings. * Removed some unneeded stuff inherited from zero.c, more to go. * Provide DECLARE_* macros for the variable-length structs. * Use kmalloc instead of usb_ep_alloc_buffer. * Limit source to 80 columns. * Return actual error code instead of -ENOMEM in a few places. Signed-off-by:
Ben Williamson <ben.williamson@greyinnovation.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Milan Svoboda authored
This patch adds mutex protection to ep_release. Signed-off-by:
-
Milan Svoboda authored
This patch fixes ep_config to return correct value. Without patch ep_config returns submitted lenght minus 4 on succes. With this patch applied, whole submitted lenght is returned. ep_config parses submitted data and if buffer starts with (int) 1 it is parsed, otherwise error is reported. Problem is that ep_config returns size of buffer minus 4 on success. I think that size of buffer should be returned instead, because there were no problems and all data were processed. Signed-off-by:
-
Milan Svoboda authored
This patch moves spin_lock (&dev->lock) before first use of dev. I think that test to the state of device should be protected with this spin_lock... Signed-off-by:
-
Dmitry Torokhov authored
Onetouch: handle errors from input_register_device() Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
David Brownell authored
The ohci-omap code has diverged from the working version in the linux-omap tree; this syncs up the versions: - Another clock is needed in various cases - The omap-1510 iommu code needs to be #ifdeffed out on newer parts - Saner use of the HCD framework - Various other changes, e.g. a Nokia 770 quirk And some minor dead-whitespace removal. Signed-off-by:
-
Hermann Kneissel authored
The attached patch adds support for the new generation of gps receivers (eg. GPSmap 60Cx) to garmin_gps.c. Signed-off-by:
Hermann Kneissel <herkne@users.sourceforge.net> Signed-off-by:
-
Ping Cheng authored
- split wacom.c into 4 files: wacom.h, wacom_wac.h, wacom_sys.c, and wacom_wac.c - where wacom_sys.c deals with system specific code, - and wacom_wac.c deals with Wacom specific code Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Franck Bui-Huu authored
This patch uses completion timeout instead of a timer to implement a timeout when submitting an URB in usb_start_wait_urb(). It also fixes a small issue. With the previous code, if no timeout happened and the URB's status was set to ECONNRESET value, the code assumed wrongly that a timeout had occured. Signed-off-by:
Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Commit b512504er085c4b1832f623d3 made ipaq_open() a bit messy by moving the read urb submission far from its usb_fill_bulk_urb() call and the comment explaining what it does. This patch put they together again. Although only compiled tested, should not break the fix introduced by b512504er085c4b1832f623d3, of course. Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning(s): drivers/usb/net/usbnet.c:654: warning: int format, different type arg (arg 3) The fact that rx_urb_size happens to be a size_t has propagated all the way back to this printk. It's fragile to be using %z in this case - let's just typecast the args instead. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
David Hollis authored
* More generi-fication of function/macro names where appropriate: ax88772_xx() -> asix_xx() * Reorder functions to provide more logical grouping * AX88178 device support * Support DLink DUB-E100 Rev B Support * Hopefully resolve all endian-ness issues * Use more defines for bitmask values * Change a number of devdbg() calls to deverr() so that if DEBUG is not defined, the error messages still get through as necessary Signed-off-by:David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Jamie Painter authored
Add usbnet_unlink_rx_urbs() which can be called by mini-drivers when they change their MTU such as for Jumbo Frame support. Signed-off-by:
-
Thiago Galesi authored
Cosmetic changes to quirk in pl2303_update_line_status Signed-off-by:
Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by:
-
Thiago Galesi authored
Reduce number of needed prototypes in Prolific pl2303 driver Signed-off-by:
-
Thiago Galesi authored
Changes the functions pl2303_buf_clear and pl2303_buf_data_avail for the purpose of keeping them under the 80 column limit, making them more similar to similar functions and making then simpler. Signed-off-by:
-
Thiago Galesi authored
Fixes several lines that overrun 80 columns in Prolific pl2303 driver and cleans up some space usages in the function calls. Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Signed-off-by:
-
Daniel Ritz authored
changes over 0.3: - some more eGalax device IDs (from eGalax driver/spec) - return the error code in probe() - 3M/MTouch init fixes, tested by Don Alexander - eGalax fixes for bugs in multi-packet handling, spottet by Pieter Grimmerink - support for some eTurboTouch devices, mostly by Pieter Grimmerink - support for Gunze AHL61 controller (untested, but simple enough) Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Pieter Grimmerink <p.grimmerink@inepro.com> Cc: Don Alexander <debug@roosoft.ltd.uk> Signed-off-by:
-
Alan Stern authored
This patch (as736) makes the hub driver more readable by improving the usage of "#ifdef CONFIG_PM" and "#ifdef CONFIG_USB_SUSPEND". Signed-off-by:
-
