Document the compatible string for version 2 of the IBM CFFPS PSU.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/1567192263-15065-2-git-send-email-eajames@linux.ibm.comReviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

There is no reason why power channel shouldn't be exported as is done for
voltage, current, temperature and humidity.

Power channel is available on iio ina226 driver.

Sysfs IIO documentation for power attribute added by commit 7c6d5c7e
("iio: Documentation: Add missing documentation for power attribute")
is declaring that value is in mili-Watts but hwmon interface is expecting
value in micro-Watts that's why there is a need for mili-Watts to
micro-Watts conversion.

Tested on Xilinx ZCU102 board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/db71f5ae87e4521a2856a1be5544de0b6cede575.1566483741.git.michal.simek@xilinx.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The ipsps1 is an Inspur Power System power supply unit
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add the driver to monitor Inspur Power System power supplies
with hwmon over pmbus.

This driver adds sysfs attributes for additional power supply data,
including vendor, model, part_number, serial number,
firmware revision, hardware revision, and psu mode(active/standby).
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20190819091509.29276-1-wangzqbj@inspur.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

ltc2990 will now use device_property_read_u32_array() instead of
of_property_read_u32_array() - allowing the use of software nodes
via fwnode_create_software_node().

This allows code using i2c_new_device() to specify a default
measurement mode for the LTC2990 via fwnode_create_software_node().
Signed-off-by: Max Staudt <max@enpas.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20190819121618.16557-2-max@enpas.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The email address listed in MODULE_AUTHOR() will be disabled in the
near future. Replace it with my private one.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/1565720249-6549-2-git-send-email-wahrenst@gmx.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>

* Create two separate functions to write into hwmon_temp and hwmon_chip.
* Call the functions from lm75_write.
* Make hwm_chip writable if the chip supports more than one sample time.
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Link: https://lore.kernel.org/r/20190808080246.8371-5-iker.perez@codethink.co.ukSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The new fields are included to prepare the driver for next patch. The
fields are:

* *resolutions: Stores all the supported resolutions by the device.
* num_sample_times: Stores the number of possible sample times.
* *sample_times: Stores all the possible sample times to be set.
* sample_set_masks: The set_masks for the possible sample times
* sample_clr_mask: Clear mask to set the default sample time.
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Link: https://lore.kernel.org/r/20190808080246.8371-4-iker.perez@codethink.co.uk
[groeck: Minor structure documentation fixes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Wrap the existing code to write configurations into registers in
a function.

Added error handling to the function.
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Link: https://lore.kernel.org/r/20190808080246.8371-3-iker.perez@codethink.co.ukSigned-off-by: Guenter Roeck <linux@roeck-us.net>

* Add to lm75_data kind field to store the kind of device the driver is
  working with.
* Add an structure to store the configuration parameters of all the
  supported devices.
* Delete resolution_limits from lm75_data and include them in the structure
  described above.
* Add a pointer to the configuration parameters structure to be used as a
  reference to obtain the parameters.
* Delete switch-case approach to get the device configuration parameters.
* The structure is cleaner and easier to maintain.
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Link: https://lore.kernel.org/r/20190808080246.8371-2-iker.perez@codethink.co.ukSigned-off-by: Guenter Roeck <linux@roeck-us.net>

NCT-7904D also supports reading of channel limitation registers as well
as SMI status registers for fan, voltage and temperature monitoring.
It also supports reading the temperature sensor type (thermal diode,
thermistor, AMD SB-TSI or Intel PECI).

Add the following sysfs nodes:

-fan[1-*]_min
-fan[1-*]_alarm
-in[1-*]_min
-in[1-*]_max
-in[1-*]_alarm
-temp[1-*]_max
-temp[1-*]_max_hyst
-temp[1-*]_emergency
-temp[1-*]_emergency_hyst
-temp[1-*]_alarm
-temp[1-*]_type
Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
Link: https://lore.kernel.org/r/20190807013842.24451-1-Amy.Shih@advantech.com.tw
[groeck: Clarified description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

I have been using SENSORS_W83795_FANCTRL for several years and never
had any problem. When the driver was added, I had not tested that
part of the driver yet so I wanted to be super cautious, but time has
shown that it works just fine.

In the long run I even believe that we should drop the option and
enable the feature unconditionally. It doesn't do anything until the
user explicitly starts twiddling with sysfs attributes anyway.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20190806102123.3118bcc5@endymionSigned-off-by: Guenter Roeck <linux@roeck-us.net>

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[groeck: Dropped jz4740-hwmon.c (driver is being removed)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

At boot time, the acpi_power_meter driver logs the following error level
message: "Ignoring unsafe software power cap". Having read about it from
a few sources, it seems that the error message can be quite misleading.

While the message can imply that Linux is ignoring the fact that the
system is operating in potentially dangerous conditions, the truth is
the driver found an ACPI_PMC object that supports software power
capping. The driver simply decides not to use it, perhaps because it
doesn't support the object.

The best solution is probably changing the log level from error to warning.
All sources I have found, regarding the error, have downplayed its
significance. There is not much of a reason for it to be on error level,
while causing potential confusions or misinterpretations.
Signed-off-by: Wang Shenran <shenran268@gmail.com>
Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for NCT6116D to nct6775 driver.
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon_device_register() is a deprecated function and produces a warning.

Converting the driver to use the hwmon_device_register_with_groups()
instead.
Signed-off-by: Grant McEwan <grant.mcewan@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20190721225530.28799-2-grant.mcewan@alliedtelesis.co.nzSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172611.3797-4-wsa+renesas@sang-engineering.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172611.3797-3-wsa+renesas@sang-engineering.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20190722172611.3797-2-wsa+renesas@sang-engineering.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

It would seem like model 70h is behaving in the same way as model 30h,
so let's just add the new F3 PCI ID to the list of compatible devices.

Unlike previous Ryzen/Threadripper, Ryzen gen 3 processors do not need
temperature offsets anymore. This has been reported in the press and
verified on my Ryzen 3700X by checking that the idle temperature
reported by k10temp is matching the temperature reported by the
firmware.

Vicki Pfau sent an identical patch after I checked that no-one had
written this patch. I would have been happy about dropping my patch but
unlike for his patch series, I had already Cc:ed the x86 people and
they already reviewed the changes. Since Vicki has not answered to
any email after his initial series, let's assume she is on vacation
and let's avoid duplication of reviews from the maintainers and merge
my series. To acknowledge Vicki's anteriority, I added her S-o-b to
the patch.

v2, suggested by Guenter Roeck and Brian Woods:
  - rename from 71h to 70h
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com>

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: "Woods, Brian" <Brian.Woods@amd.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20190722174653.2391-1-marcel.p.bocu@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The AMD Ryzen gen 3 processors came with a different PCI IDs for the
function 3 & 4 which are used to access the SMN interface. The root
PCI address however remained at the same address as the model 30h.

Adding the F3/F4 PCI IDs respectively to the misc and link ids appear
to be sufficient for k10temp, so let's add them and follow up on the
patch if other functions need more tweaking.

Vicki Pfau sent an identical patch after I checked that no-one had
written this patch. I would have been happy about dropping my patch but
unlike for his patch series, I had already Cc:ed the x86 people and
they already reviewed the changes. Since Vicki has not answered to
any email after his initial series, let's assume she is on vacation
and let's avoid duplication of reviews from the maintainers and merge
my series. To acknowledge Vicki's anteriority, I added her S-o-b to
the patch.

v2, suggested by Guenter Roeck and Brian Woods:
 - rename from 71h to 70h
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Brian Woods <brian.woods@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>	# pci_ids.h

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: "Woods, Brian" <Brian.Woods@amd.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20190722174510.2179-1-marcel.p.bocu@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This document was recently introduced. Convert it to ReST
just like the other hwmon documents, adding it to the hwmon index.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/657bf022625e0888d3becf10c78d162eeb864608.1563792334.git.mchehab+samsung@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Removes:
- hwmon_dev from k8temp_data struct, as that is now passed
  to callbacks, anyway.
- other k8temp_data struct fields, too.
- k8temp_update_device()

Also reduces binary size:
   text    data     bss     dec     hex filename
   4139    1448       0    5587    15d3 drivers/hwmon/k8temp.ko.bak
   3103    1220       0    4323    10e3 drivers/hwmon/k8temp.ko
Signed-off-by: Robert Karszniewicz <avoidr@firemail.cc>
Signed-off-by: Robert Karszniewicz <avoidr@riseup.net>
Link: https://lore.kernel.org/r/20190721120051.28064-1-avoidr@riseup.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>

There is a typo in MAX37185_NUM_FAN_PAGES. To be consistent, it should be
MAX31785_NUM_FAN_PAGES (1 and 7 switched).

At line 24, we already have:
   #define MAX31785_NR_FAN_PAGES		6
and MAX37185_NUM_FAN_PAGES seems to be unused.

It is likely that it is only a typo and/or a left-over.
So, axe it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190721101553.20911-1-christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The NXP PCT2075 is largely compatible with other chips already supported
by the LM75 driver. It uses an 11-bit resolution and defaults to 100 ms
sampling period. The datasheet is here:

  https://www.nxp.com/docs/en/data-sheet/PCT2075.pdfSigned-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20190711124504.7580-2-daniel@zonque.org
[groeck: Documentation update]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The PCT2075 is compatible to other chips that are already handled by
the LM75 driver.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20190711124504.7580-1-daniel@zonque.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

A driver for ADS1015 with more functionality is available in the iio
subsystem.

Remove the hwmon driver as duplicate. If the chip is used for hardware
monitoring, the iio->hwmon bridge should be used.

Cc: Dirk Eibach <eibach@gdsys.de>
Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.netAcked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

In coretemp_init(), 'zone_devices' is allocated through kcalloc().
However, it is not deallocated in the following execution if
platform_driver_register() fails, leading to a memory leak. To fix this
issue, introduce the 'outzone' label to free 'zone_devices' before
returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1566248402-6538-1-git-send-email-wenwen@cs.uga.eduSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Writes into limit registers fail if the temperature written is negative.
The regmap write operation checks the value range, regmap_write accepts
an unsigned int as parameter, and the temperature value passed to
regmap_write is kept in a variable declared as long. Negative values
are converted large unsigned integers, which fails the range check.
Fix by type casting the temperature to u16 when calling regmap_write().

Cc: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Fixes: e65365fe ("hwmon: (lm75) Convert to use regmap")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Build bot reports the following build issue after commit 9091373a
("gpio: remove less important #ifdef around declarations):

   In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
>> include/linux/gpio/driver.h:576:1: error: redefinition of 'gpiochip_add_pin_range'
    gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
    ^~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
   include/linux/gpio.h:245:1: note: previous definition of 'gpiochip_add_pin_range' was here
    gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
    ^~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
>> include/linux/gpio/driver.h:583:1: error: redefinition of 'gpiochip_add_pingroup_range'
    gpiochip_add_pingroup_range(struct gpio_chip *chip,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
   include/linux/gpio.h:254:1: note: previous definition of 'gpiochip_add_pingroup_range' was here
    gpiochip_add_pingroup_range(struct gpio_chip *chip,
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
>> include/linux/gpio/driver.h:591:1: error: redefinition of 'gpiochip_remove_pin_ranges'
    gpiochip_remove_pin_ranges(struct gpio_chip *chip)
    ^~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
   include/linux/gpio.h:263:1: note: previous definition of 'gpiochip_remove_pin_ranges' was here
    gpiochip_remove_pin_ranges(struct gpio_chip *chip)

This is caused by conflicting defines from linux/gpio.h and
linux/gpio/driver.h. Drivers should not include both the legacy and
the new API headers. This driver doesn't even use linux/gpio.h so
remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190808080144.6183-1-brgl@bgdev.plSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull auxdisplay cleanup from Miguel Ojeda:
 "Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)"

* tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux:
  auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant

Pull UML fix from Richard Weinberger:
 "Fix time travel mode"

* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: fix time travel mode

Pull UBIFS and JFFS2 fixes from Richard Weinberger:
 "UBIFS:
   - Don't block too long in writeback_inodes_sb()
   - Fix for a possible overrun of the log head
   - Fix double unlock in orphan_delete()

  JFFS2:
   - Remove C++ style from UAPI header and unbreak picky toolchains"

* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Limit the number of pages in shrink_liability
  ubifs: Correctly initialize c->min_log_bytes
  ubifs: Fix double unlock around orphan_delete()
  jffs2: Remove C++ style comments from uapi header

Pull x86 fixes from Thomas Gleixner:
 "A few fixes for x86:

   - Fix a boot regression caused by the recent bootparam sanitizing
     change, which escaped the attention of all people who reviewed that
     code.

   - Address a boot problem on machines with broken E820 tables caused
     by an underflow which ended up placing the trampoline start at
     physical address 0.

   - Handle machines which do not advertise a legacy timer of any form,
     but need calibration of the local APIC timer gracefully by making
     the calibration routine independent from the tick interrupt. Marked
     for stable as well as there seems to be quite some new laptops
     rolled out which expose this.

   - Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
     affected by broken firmware which does not initialize RDRAND
     correctly after resume. Add a command line parameter to override
     this for machine which either do not use suspend/resume or have a
     fixed BIOS. Unfortunately there is no way to detect this on boot,
     so the only safe decision is to turn it off by default.

   - Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
     caused fast KVM instruction emulation to break.

   - Explain the Intel CPU model naming convention so that the repeating
     discussions come to an end"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
  x86/boot: Fix boot regression caused by bootparam sanitizing
  x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
  x86/boot/compressed/64: Fix boot on machines with broken E820 table
  x86/apic: Handle missing global clockevent gracefully
  x86/cpu: Explain Intel model naming convention

Pull timekeeping fix from Thomas Gleixner:
 "A single fix for a regression caused by the generic VDSO
  implementation where a math overflow causes CLOCK_BOOTTIME to become a
  random number generator"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping/vsyscall: Prevent math overflow in BOOTTIME update

Pull scheduler fix from Thomas Gleixner:
 "Handle the worker management in situations where a task is scheduled
  out on a PI lock contention correctly and schedule a new worker if
  possible"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Schedule new worker even if PI-blocked

Pull perf fixes from Thomas Gleixner:
 "Two small fixes for kprobes and perf:

   - Prevent a deadlock in kprobe_optimizer() causes by reverse lock
     ordering

   - Fix a comment typo"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Fix potential deadlock in kprobe_optimizer()
  perf/x86: Fix typo in comment

Pull irq fix from Thomas Gleixner:
 "A single fix for a imbalanced kobject operation in the irq decriptor
  code which was unearthed by the new warnings in the kobject code"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Properly pair kobject_del() with kobject_add()

Mergr misc fixes from Andrew Morton:
 "11 fixes"

Mostly VM fixes, one psi polling fix, and one parisc build fix.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
  mm/zsmalloc.c: fix race condition in zs_destroy_pool
  mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
  mm, page_owner: handle THP splits correctly
  userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
  psi: get poll_work to run when calling poll syscall next time
  mm: memcontrol: flush percpu vmevents before releasing memcg
  mm: memcontrol: flush percpu vmstats before releasing memcg
  parisc: fix compilation errrors
  mm, page_alloc: move_freepages should not examine struct page of reserved memory
  mm/z3fold.c: fix race between migration and destruction