Remove an unused parameter and fix up the comment.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This patch fixes a couple of minor problems with RNR NAK handling:
 - The insertion sort was causing extra delay when inserting ahead
   vs. behind an existing entry on the list.
 - A resend of a first packet of a message which is still not ready,
   needs another RNR NAK (i.e., it was suppressed when it shouldn't).
 - Also, the resend tasklet doesn't need to be woken up unless the
   ACK/NAK actually indicates progress has been made.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This patch allows ehca to forward event client-reregister-required to
registered clients.  One such event is generated by a switch eg. after
its reboot.
Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Rather than byte-swapping cqe->g_mlpath_rqpn each time we extract a
field from it, byte-swap it once into a temporary variable.  This 
results in smaller, better code -- eg, on 32-bit x86:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-5 (-5)
function                                     old     new   delta
mlx4_ib_poll_cq                             1188    1183      -5
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Remove MSI support from the mthca driver, as scheduled.  There is no
reason to use MSI instead of MSI-X, since MSI-X performs better.  No
one has spoken up since MSI support was deprecated in commit f6be6fbe
("IB/mthca: Schedule MSI support for removal"), so apparently the MSI
support is unused.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Erez Zilber <erezz@voltaire.com>

This is based on user feedback from Doug Ledford at RedHat:

Events that occur on an rdma_cm_id are reported to userspace through an
event channel.  Connection request events are reported on the event
channel associated with the listen.  When the connection is accepted, a
new rdma_cm_id is created and automatically uses the listen event
channel.  This is suboptimal where the user only wants listen events on
that channel.

Additionally, it may be desirable to have events related to connection
establishment use a different event channel than those related to
already established connections.

Allow the user to migrate an rdma_cm_id between event channels. All
pending events associated with the rdma_cm_id are moved to the new event
channel.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Enable conn_id remove on the passive side after connection
establishment.  This corrects an issue where the IB driver can't be
unloaded after running applications over RDS.  The 'dev_remove' counter
does not reach 0 for established connections on the passive side.

This problem is limited to device removal, and only occurs on the
passive side if there are established connections.
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

In cancel_mads(), MADs are moved from the wait_list and local_list
to a cancel_list for processing.  However, the structures on these two
lists are not the same.  The wait_list references struct
ib_mad_send_wr_private, but local_list references struct
ib_mad_local_private.  Cancel_mads() treats all items moved to the
cancel_list as struct ib_mad_send_wr_private.  This leads to a system
crash when requests are moved from the local_list to the cancel_list.

Fix this by leaving local_list alone.  All requests on the local_list
have completed are just awaiting processing by a queued worker thread.

Bug (crash) reported by Dotan Barak <dotanb@dev.mellanox.co.il>.
Problem with local_list access reported by Robert Reynolds
<rreynolds@opengridcomputing.com>.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add performance/debug counters to track sent/received messages, retries,
and duplicates.  Counters are tracked per CM message type, per port.

The counters are always enabled, so intrusive state tracking is not done.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

To allow ULPs to tune timeout values and capture retry statistics,
report the number of times that a mad send operation was retried.

For RMPP mads, report the total number of times that the any portion
(send window) of the send operation was retried.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

P_key changes can invalidate multicast groups.  Report errors on all
multicast groups affected by a pkey change.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

log_max_eqs is a 4-bit field, not a 3-bit field in the response to the
QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7
when reading it.

Found by Yossi Leybovitch of Mellanox.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add the work completion error code to the QP error debug output.
This makes it easier to determine the cause of the error.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

An internal code review found the comment here lacking -- update it with 
more specifics of how and why the rmb() is there.
Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

During a code review, someone noticed the comments didn't match the code.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The gen2_basic tests check for the errno value when a CQ is resized
smaller than the number of outstanding completions queue on the CQ.
This patch changes ib_ipath to return EINVAL which is what ib_mthca
returns and what gen2_basic expects.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Code review pointed out that the locking around uses of ipath_sendctrl 
and kr_sendctrl were, in several places, incorrect and/or inconsistent.
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

At one point in time there was code to allow a user process to
wait for a send buffer if none were available. This feature was
never used and most of the code was removed. This removes
some missed unused code.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The 5.0 firmware now supports translating sgls in recv work requests,
so remove the host driver logic currently doing the translation.

Note: this change requires 5.0 firmware.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Currently the call into cxgb3 to get the driver info is not serialized.
The iw_cxgb3 module needs to hold the rtnl_lock around the ethtool ops
call like dev_ioctl() does.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add missing spaces in the middle of format strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Michael Albaugh <Michael.Albaugh@qlogic.com>
Tested-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The local loopback of an outgoing DR SMP response is limited to those
that originate at the driver specific SMA implementation during the
driver specific process_mad() function.  This patch enables a
returning DR SMP originating in userspace (or elsewhere) to be
delivered to the local managment stack.  In this specific case the
driver process_mad() function does not consume or process the MAD, so
a reponse mad has not be created and the original MAD must manually be
copied to the MAD buffer that is to be handed off to the local agent.
Signed-off-by: Steve Welch <swelch@systemfabricworks.com>
Acked-by: Hal Rosenstock <hal@xsigo.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This patch is in response to reviewing a patch to the core MAD
processing which fixes loopback of directed route packets to/from user
level MAD agents.  This change enables the core code to work for
ib_ipath by fixing the return code from the ipath process_mad method.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

In ib_mad_recv_done_handler(), the response pointer is checked for
NULL after allocating it.  It is then checked again in the local
process_mad() path but there is no possibility of it changing in
between.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Acked-by: Hal Rosenstock <hal@xsigo.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Set the initiator depth and responder resources to the device max
values for new connect request events in the iWARP connection manager.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Improve interrupt handler cache footprint by noinline'ing error
functions that are rarely called.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared
receive queues).  The current IPoIB connected mode support only works
on devices that support SRQs.

Fix this by adding support for using the receive queue of each
connected mode receive QP.  The disadvantage of this compared to using
an SRQ is that it means a full queue of receives must be posted for
each remote connected mode peer, which means that total memory usage
is potentially much higher than when using SRQs.  To manage this, add
a new module parameter "max_nonsrq_conn_qp" that limits the number of
connections allowed per interface.

The rest of the changes are fairly straightforward: we use a table of
struct ipoib_cm_rx to hold all the active connections, and put the
table index of the connection in the high bits of receive WR IDs.
This is needed because we cannot rely on the struct ib_wc.qp field for
non-SRQ receive completions.  Most of the rest of the changes just
test whether or not an SRQ is available, and post receives or find
received packets in the right place depending on the answer.

Cleaning up dead connections actually becomes simpler, because we do
not have to do the "last WQE reached" dance that is required to
destroy QPs attached to an SRQ.  We just move the QP to the error
state and wait for all pending receives to be flushed.
Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>

[ Completely rewritten and split up, based on Pradeep's work.  Several
  bugs fixed and no doubt several bugs introduced.  - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code for going through the rx_reap list of struct
ipoib_cm_rx and freeing each one.  This consolidates the code
duplicated between ipoib_cm_dev_stop() and ipoib_cm_rx_reap() and
reduces the risk of error when adding additional accounting.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code to create an SRQ and allocate the receive ring in
ipoib_cm_dev_init() into a new function ipoib_cm_create_srq().  This
will make the code neater when support for devices that don't implement
SRQs is added.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Factor out the code to unmap/free skbs and free the receive ring in
ipoib_cm_dev_cleanup() into a new function ipoib_cm_free_rx_ring().
This function will be called from a couple of other places when
support for devices that don't implement SRQs is added.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Fix whitespace blunders, convert "foo* bar" to "foo *bar", etc.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Commit 23b9c1ab ("Infiniband: make ipath driver use default driver
groups.") introduced a bug in the ipath driver where
ipath_device_create_group() fell through into the error path, even on
success, which meant that the sysfs groups it created would always get
removed right away.  This made ipath_device_remove_group() hit the
BUG_ON() in sysfs_remove_group() when it tried to remove those groups a
second time.

Correct the return path so that the groups stick around until they are
supposed to be cleaned up.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: make mls_compute_sid always polyinstantiate
  security/selinux: constify function pointer tables and fields
  security: add a secctx_to_secid() hook
  security: call security_file_permission from rw_verify_area
  security: remove security_sb_post_mountroot hook
  Security: remove security.h include from mm.h
  Security: remove security_file_mmap hook sparse-warnings (NULL as 0).
  Security: add get, set, and cloning of superblock security information
  security/selinux: Add missing "space"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] extint: Set initial irq type to low level
  [AVR32] extint: change set_irq_type() handling
  [AVR32] NMI debugging
  [AVR32] constify function pointer tables
  [AVR32] ATNGW100: Update defconfig
  [AVR32] ATSTK1002: Update defconfig
  [AVR32] Kconfig: Choose daughterboard instead of CPU
  [AVR32] Add support for ATSTK1003 and ATSTK1004
  [AVR32] Clean up external DAC setup code
  [AVR32] ATSTK1000: Move gpio-leds setup to setup.c
  [AVR32] Add support for AT32AP7001 and AT32AP7002
  [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg
  [AVR32] Oprofile support
  [AVR32] Include instrumentation menu
  Disable VGA text console for AVR32 architecture
  [AVR32] Enable debugging only when needed
  ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME
  [AVR32] Remove redundant try_to_freeze() call from do_signal()
  [AVR32] Drop GFP_COMP for DMA memory allocations

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits)
  [GFS2] Allow journal recovery on read-only mount
  [GFS2] Lockup on error
  [GFS2] Fix page_mkwrite truncation race path
  [GFS2] Fix typo
  [GFS2] Fix write alloc required shortcut calculation
  [GFS2] gfs2_alloc_required performance
  [GFS2] Remove unneeded i_spin
  [GFS2] Reduce inode size by moving i_alloc out of line
  [GFS2] Fix assert in log code
  [GFS2] Fix problems relating to execution of files on GFS2
  [GFS2] Initialize extent_list earlier
  [GFS2] Allow page migration for writeback and ordered pages
  [GFS2] Remove unused variable
  [GFS2] Fix log block mapper
  [GFS2] Minor correction
  [GFS2] Eliminate the no longer needed sd_statfs_mutex
  [GFS2] Incremental patch to fix compiler warning
  [GFS2] Function meta_read optimization
  [GFS2] Only fetch the dinode once in block_map
  [GFS2] Reorganize function gfs2_glmutex_lock
  ...