- 27 Jun, 2016 1 commit
-
-
Alexandre Belloni authored
ds17287rtc.h is unused since 15beb694 ("mips: ip32: add platform data hooks to use DS1685 driver"), remove it. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 26 Jun, 2016 3 commits
-
-
Andrey Smirnov authored
A call to ioctl(..., RTC_IRQP_SET, ...) should never result in ENOTTY. All new style RTC drivers implement it and all of the old style drivers return EINVAL when they don't support periodic IRQs. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Andrey Smirnov authored
A call to ioctl(..., RTC_IRQP_READ, ...) should never result in ENOTTY. All new style RTC drivers implement it and all of the old style drivers return EINVAL when they don't support periodic IRQs. Signed-off-by:
-
Andrey Smirnov authored
For old style drivers, call a call to ioctl(..., RTC_ALM_SET, ...): - char/ds1302.c will always return -EINVAL - char/genrtc.c: will always return -EINVAL - char/rtc.c will succeed regardless if IRQs are supported or not - char/efirtc.c will always return -EINVAL - input/misc/hp_sdc_rtc.c ... that ioctl code is a good lesson about ifdefing code out and punting implementation ... and it will always return -EINVAL For new style rtc drivers, a call to ioctl(..., RTC_ALM_SET, ...) never results in a call to __rtc_set_alarm, since struct rtc_wkalarm passed to rtc_set_alarm has 'enabled' field set to 0. This means that rtc->ops->set_alarm driver hook is never called in that ioctl. Since no driver code interaction happens as a part of that call, using its results to ascertain properties of the driver is not going to work. To remedy this - use the result of RTC_AIE_ON to make the judgement. This patch also changes ENOTTY to EINVAL as an error code value that would tell us that IRQs are not supported. There are three reason for this: - As mentioned above old style driver never returns ENOTTY for this ioctl - In it's code __rtc_set_alarm() returns -EINVAL if rtc->ops->set_alarm method is not provided by the driver, so one reason for change is to be consistent with that code path. - A call to ioctl(..., RTC_UIE_ON, ...) will result in a call to rtc_update_irq_enable() and then __rtc_set_alarm(), which, if IRQs are not supported by the driver, will result in a non-zero error code. Returning ENOTTY in that case would: a) Not be consistent with other codepaths of rtc_update_irq_enable, for example the check of rtc->uie_unsupported b) Would break update IRQ emulation code since that codpath expects EINVAL c) Would break test's logic for feature support detection in the case of RTC_UIE_ON ioctl Signed-off-by:
-
- 25 Jun, 2016 3 commits
-
-
Alexandre Belloni authored
The previous workaround may still fail as there are actually 4 retries to be done to ensure the communication succeed. Also, some I2C adapter drivers may return -EIO instead of -ENXIO. Signed-off-by: -
Arnd Bergmann authored
The mc146818_get_time/mc146818_set_time functions are rather large inline functions in a global header file and are used in several drivers and in x86 specific code. Here we move them into a separate .c file that is compiled whenever any of the users require it. This also lets us remove the linux/acpi.h header inclusion from mc146818rtc.h, which in turn avoids some warnings about duplicate definition of the TRUE/FALSE macros. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
nn10300 has a dependency on mc146818_get_time/mc146818_set_time, which we want to move from the mc146818rtc.h header into the rtc subsystem, which in turn is not usable on mn10300. This changes mn10300 to use the modern rtc-cmos driver instead of the old RTC driver, and that in turn lets us completely remove the read_persistent_clock/update_persistent_clock callbacks. Signed-off-by:
-
- 06 Jun, 2016 2 commits
-
-
Arnd Bergmann authored
When building random configurations, we now occasionally get a new build error: In file included from include/linux/kernel.h:13:0, from include/linux/list.h:8, from include/linux/preempt.h:10, from include/linux/spinlock.h:50, from arch/x86/kernel/nmi.c:13: arch/x86/kernel/nmi.c: In function 'nmi_max_handler': include/linux/printk.h:375:9: error: type defaults to 'int' in declaration of 'DEFINE_RATELIMIT_STATE' [-Werror=implicit-int] static DEFINE_RATELIMIT_STATE(_rs, \ ^ arch/x86/kernel/nmi.c:110:2: note: in expansion of macro 'printk_ratelimited' printk_ratelimited(KERN_INFO ^~~~~~~~~~~~~~~~~~ This was working before the rtc rework series because linux/ratelimit.h was included implictly through asm/mach_traps.h -> asm/mc146818rtc.h -> linux/mc146818rtc.h -> linux/rtc.h -> linux/device.h. We clearly shouldn't rely on this indirect inclusion, so this adds an explicit #include in the file that needs it. Signed-off-by:kbuild test robot <fengguang.wu@intel.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Fixes: 5ab788d7 ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h") Signed-off-by:
-
Alexander Graf authored
While the EFI spec mandates an RTC, not every implementation actually adheres to that rule (or can adhere to it - some systems just don't have an RTC). For those, we really don't want to probe the EFI RTC driver at all, because if we do we'd get a non-functional driver that does nothing useful but only spills our kernel log with warnings. Signed-off-by:
Alexander Graf <agraf@suse.de> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
- 04 Jun, 2016 5 commits
-
-
Venkat Prashanth B U authored
Add support for Maxim max6916 RTC. Signed-off-by:
Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by:
-
Martin Kepplinger authored
Use sign_extend32() instead of open coding sign extension. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Heinrich Schuchardt authored
The day of month is checked in ds1685_rtc_read_alarm and ds1685_rtc_set_alarm. Multiple errors exist in the day of month check. Operator ! has a higher priority than &&. (!(mday >= 1) && (mday <= 31)) is false for mday == 32. When verifying the day of month the binary and the BCD mode have to be considered. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Colin Ian King authored
This patch fixes a RTC wakealarm issue, namely, the event fires during hibernate and is not cleared from the list, causing hwclock to block. The current enqueuing does not trigger an alarm if any expired timers already exist on the timerqueue. This can occur when a RTC wake alarm is used to wake a machine out of hibernate and the resumed state has old expired timers that have not been removed from the timer queue. This fix skips over any expired timers and triggers an alarm if there are no pending timers on the timerqueue. Note that the skipped expired timer will get reaped later on, so there is no need to clean it up immediately. The issue can be reproduced by putting a machine into hibernate and waking it with the RTC wakealarm. Running the example RTC test program from tools/testing/selftests/timers/rtctest.c after the hibernate will block indefinitely. With the fix, it no longer blocks after the hibernate resume. BugLink: http://bugs.launchpad.net/bugs/1333569Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Arnd Bergmann authored
sparc32:allmodconfig fails to build in next-20160602 as follows. In file included from drivers/block/floppy.c:185:0: include/linux/mc146818rtc.h: In function 'mc146818_is_updating': include/linux/mc146818rtc.h:138:9: error: 'rtc_port' undeclared (first use in this function) include/linux/mc146818rtc.h:138:9: note: each undeclared identifier is reported only once for each function it appears in include/linux/mc146818rtc.h: In function 'mc146818_get_time': include/linux/mc146818rtc.h:172:17: error: 'rtc_port' undeclared (first use in this function) include/linux/mc146818rtc.h: In function 'mc146818_set_time': include/linux/mc146818rtc.h:278:8: error: 'rtc_port' undeclared (first use in this function) scripts/Makefile.build:295: recipe for target 'drivers/block/floppy.o' failed The reason is a duplicate definition of the RTC_PORT macro. The one in arch/sparc/include/asm/io_32.h was apparently used a long time ago for the drivers/char/rtc.c driver that is not available on SPARC any more, since we now select 'RTC_CLASS' unconditionally. Removing the macro fixes the build problem, and for consistency, this also removes the RTC_ALWAYS_BCD macro and the comment for both. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fd09cc80165c ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h") Signed-off-by:
-
- 03 Jun, 2016 16 commits
-
-
Arnd Bergmann authored
No architecture uses the genrtc driver any more, so let's kill it off for good. This now also includes asm-generic/rtc.h, which is otherwise completely unused. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Arnd Bergmann authored
arch/mips/sni/time.c includes asm-generic/rtc.h for no apparent reason, and it works fine without that header, so lets remove the inclusion in preparation of deleting the file. Signed-off-by:
-
Arnd Bergmann authored
All architectures using this driver are now converted to provide their own operations, so this one can be turned into a trivial stub driver relying on its platform data. Signed-off-by:
-
Arnd Bergmann authored
PowerPC is the last architecture using the GEN_RTC driver on some machines, but we can migrate them all to using the RTC_DRV_GENERIC driver instead now. This moves over the CONFIG_GEN_RTC option from drivers/char into arch/powerpc/platforms/Kconfig and makes it just select the replacement driver instead, for the only reason of not breaking existing defconfig and .config files that users may have. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and powerpc has another abstraction on top, which is a bit silly. This changes the powerpc rtc-generic device to provide its rtc_class_ops directly, to reduce the number of layers by one. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
-
Arnd Bergmann authored
The asm/rtc.h header is only used for the old gen_rtc driver that has been replaced by rtc-generic. According to Geert Uytterhoeven, nobody has used the old driver on m68k for a long time, so we can now just remove the header file and disallow the driver in Kconfig. All files that used to include asm/rtc.h are now changed so they include the headers that were used implicitly through asm/rtc.h. Signed-off-by:
-
Arnd Bergmann authored
The q40 platform is the only machine in the kernel that provides RTC_PLL_GET/RTC_PLL_SET ioctl commands in its rtc through the mach_get_rtc_pll/mach_set_rtc_pll callbacks. However, this currenctly works only in the old-style genrtc driver, not the (somewhat) modern rtc-generic driver replacing it. This adds an ioctl implementation to the m68k generic_rtc_ops in order to let both drivers provide the same API. After this, we should be able to remove support for genrtc from the m68k architecture. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and m68k has another abstraction on top, which is a bit silly. This changes the m68k rtc-generic device to provide its rtc_class_ops directly, to reduce the number of layers by one. Signed-off-by:
-
Arnd Bergmann authored
This architecture selects RTC_CLASS unconditionally, so the GEN_RTC has not worked here for a long time. Now we can remove both the asm/rtc.h header and the Kconfig dependency for CONFIG_GEN_RTC. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and on pa-risc, that is implemented using an open-coded version of rtc_time_to_tm/rtc_tm_to_time. This changes the parisc rtc-generic device to provide its rtc_class_ops directly, using the normal helper functions, which makes this y2038 safe (on 32-bit) and simplifies the implementation. Signed-off-by:
-
Arnd Bergmann authored
The genrtc driver serves no purpose on mn10300 because it drives the same hardware as the original rtc.c driver, and the newer rtc-generic.c or rtc-cmos.c drivers on architectures that use the asm-generic/rtc.h header. I assume it was initially only added for completeness when the mn10300 port was done, but the older rtc.c driver was always used instead. We can also stop include asm-generic/rtc.h now, because we just call mc146818_set_time() directly. It would be nice to change the architecture to use the rtc-cmos driver next, and remove support for the old rtc driver as well. [linux@roeck-us.net: Add missing include file to proc-init.c] Signed-off-by:
-
Arnd Bergmann authored
The genrtc driver serves no purpose on Alpha because it drives the same hardware as the original rtc.c driver, and the newer rtc-generic.c or rtc-cmos.c drivers on architectures that use the asm-generic/rtc.h header. The defconfig uses CONFIG_RTC=y, so this driver is not used by default. At one point it was used to abstract a quirk for the "Marvel" platform, but it does not do this any more after the code was moved into yet another driver in arch/alpha/kernel/rtc.c. Signed-off-by:
-
Arnd Bergmann authored
The rtc-generic driver provides an architecture specific wrapper on top of the generic rtc_class_ops abstraction, and on sh, that goes through another indirection using the rtc_sh_get_time/rtc_sh_set_time functions. This changes the sh rtc-generic device to provide its rtc_class_ops directly, skipping one of the abstraction levels. Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Arnd Bergmann authored
Commit 3195ef59 ("x86: Do full rtc synchronization with ntp") had the side-effect of unconditionally enabling the RTC_LIB symbol on x86, which in turn disables the selection of the CONFIG_RTC and CONFIG_GEN_RTC drivers that contain a two older implementations of the CONFIG_RTC_DRV_CMOS driver. This removes x86 from the list for genrtc, and changes all references to the asm/rtc.h header to instead point to the interfaces from linux/mc146818rtc.h. Signed-off-by:
-
Arnd Bergmann authored
Drivers should not really include stuff from asm-generic directly, and the PC-style cmos rtc driver does this in order to reuse the mc146818 implementation of get_rtc_time/set_rtc_time rather than the architecture specific one for the architecture it gets built for. To make it more obvious what is going on, this moves and renames the two functions into include/linux/mc146818rtc.h, which holds the other mc146818 specific code. Ideally it would be in a .c file, but that would require extra infrastructure as the functions are called by multiple drivers with conflicting dependencies. With this change, the asm-generic/rtc.h header also becomes much more generic, so it can be reused more easily across any architecture that still relies on the genrtc driver. The only caller of the internal __get_rtc_time/__set_rtc_time functions is in arch/alpha/kernel/rtc.c, and we just change those over to the new naming. Signed-off-by:
-
Arnd Bergmann authored
Nothing on these architectures ever includes the asm/mc146818rtc.h file, the drivers that used to do this have been fixed long ago, and the remaining users are all PC-specific. This removes the files for good. Signed-off-by:
-
- 29 May, 2016 5 commits
-
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
-
Uwe Kleine-König authored
rtc drivers are supposed to set values they don't support to -1. To simplify this for drivers and also make it harder for them to get it wrong initialize the values to -1. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
-
- 28 May, 2016 5 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by:
-
