- 13 Jul, 2017 5 commits
-
-
Darrick J. Wong authored
In the iomap implementations of SEEK_HOLE and SEEK_DATA, make sure we return -ENXIO for negative offsets. Inspired-by: Mateusz S <muttdini@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
This reverts commit 50e0bdbe. The new XFS_QMOPT_NOLOCK isn't used at all, and conditional locking based on a flag is always the wrong thing to do - we should be having helpers that can be called without the lock instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
The comment mentioned the wrong lock. Also add an ASSERT to assert this locking precondition. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 08 Jul, 2017 1 commit
-
-
Darrick J. Wong authored
In quite a few places we call xfs_da_read_buf with a mappedbno that we don't control, then assume that the function passes back either an error code or a buffer pointer. Unfortunately, if mappedbno == -2 and bno maps to a hole, we get a return code of zero and a NULL buffer, which means that we crash if we actually try to use that buffer pointer. This happens immediately when we set the buffer type for transaction context. Therefore, check that we have no error code and a non-NULL bp before trying to use bp. This patch is a follow-up to an incomplete fix in 96a3aefb ("xfs: don't crash if reading a directory results in an unexpected hole"). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 07 Jul, 2017 1 commit
-
-
Darrick J. Wong authored
XFS has a maximum symlink target length of 1024 bytes; this is a holdover from the Irix days. Unfortunately, the constant establishing this is 'MAXPATHLEN' and is /not/ the same as the Linux MAXPATHLEN, which is 4096. The kernel enforces its 1024 byte MAXPATHLEN on symlink targets, but xfsprogs picks up the (Linux) system 4096 byte MAXPATHLEN, which means that xfs_repair doesn't complain about oversized symlinks. Since this is an on-disk format constraint, put the define in the XFS namespace and move everything over to use the new name. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
- 05 Jul, 2017 1 commit
-
-
Brian Foster authored
The patch below updated xfs_dq_get_next_id() to use the XFS iext lookup helpers to locate the next quota id rather than to seek for data in the quota file. The updated code fails to correctly handle the case where the quota inode might have contiguous chunks part of the same extent. In this case, the start block offset is calculated based on the next expected id but the extent lookup returns the same start offset as for the previous chunk. This causes the returned id to go backwards and livelocks the quota iteration. This problem is reproduced intermittently by generic/232. To handle this case, check whether the startoff from the extent lookup is behind the startoff calculated from the next quota id. If so, bump up got.br_startoff to the specific file offset that is expected to hold the next dquot chunk. Fixes: bda250db ("xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent") Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 03 Jul, 2017 3 commits
-
-
Christoph Hellwig authored
Switch to the iomap_seek_hole and iomap_seek_data helpers for implementing lseek SEEK_HOLE / SEEK_DATA, and remove all the code that isn't needed any more. Based on patches from Andreas Gruenbacher <agruenba@redhat.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Andreas Gruenbacher authored
Filesystems can use this for implementing lseek SEEK_HOLE / SEEK_DATA support via iomap. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [hch: split functions, coding style cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Andreas Gruenbacher authored
Both ext4 and xfs implement seeking for the next hole or piece of data in unwritten extents by scanning the page cache, and both versions share the same bug when iterating the buffers of a page: the start offset into the page isn't taken into account, so when a page fits more than two filesystem blocks, things will go wrong. For example, on a filesystem with a block size of 1k, the following command will fail: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Introduce a generic vfs helper for seeking in the page cache that gets this right. The next commits will replace the filesystem specific implementations. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [hch: dropped the export] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 02 Jul, 2017 3 commits
-
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Christoph Hellwig authored
This goes straight to a single lookup in the extent list and avoids a roundtrip through two layers that don't add any value for the simple quoata file that just has data or holes and no page cache, delayed allocation, unwritten extent or COW fork (which btw, doesn't seem to be handled by the existing SEEK HOLE/DATA code). Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Carlos Maiolino authored
While adding error injection into IO completion, I notice the lack of initialization check in xfs_errortag_test(), make the error injection mechanism unable to be used there. IO completion is executed a few times before the error injection mechanism is initialized, so to be safer, make xfs_errortag_test() check if the errortag is properly initialized. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 28 Jun, 2017 9 commits
-
-
Darrick J. Wong authored
Add a new dqget flag that grabs the dquot without taking the ilock. This will be used by the scrubber (which will have already grabbed the ilock) to perform basic sanity checking of the quota data. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
kbuild test robot authored
fs/xfs/xfs_log.c:2092:38-39: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: d4ca1d55 ("xfs: dump transaction usage details on log reservation overrun") CC: Brian Foster <bfoster@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Jan Kara authored
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by calling __xfs_set_acl() instead of xfs_set_acl() when setting up inode in xfs_generic_create(). That prevents SGID bit clearing and mode is properly set by posix_acl_create() anyway. We also reorder arguments of __xfs_set_acl() to match the ordering of xfs_set_acl() to make things consistent. Fixes: 07393101 CC: stable@vger.kernel.org CC: Darrick J. Wong <darrick.wong@oracle.com> CC: linux-xfs@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Brian Foster authored
XFS runs an eofblocks reclaim scan before returning an ENOSPC error to userspace for buffered writes. This facilitates aggressive speculative preallocation without causing user visible side effects such as premature ENOSPC. Run a cowblocks scan in the same situation to reclaim lingering COW fork preallocation throughout the filesystem. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Brian Foster authored
Now that error injection tags support dynamic frequency adjustment, replace the debug mode sysfs knob that controls log record CRC error injection with an error injection tag. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
Darrick J. Wong authored
We now have enhanced error injection that can control the frequency with which errors happen, so convert drop_writes to use this. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
-
Darrick J. Wong authored
Since we moved the injected error frequency controls to the mountpoint, we can get rid of the last argument to XFS_TEST_ERROR. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
-
Darrick J. Wong authored
Creates a /sys/fs/xfs/$dev/errortag/ directory to control the errortag values directly. This enables us to control the randomness values, rather than having to accept the defaults. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
-
Darrick J. Wong authored
Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
-
- 24 Jun, 2017 1 commit
-
-
Brian Foster authored
Log recovery allocates in-core transaction and member item data structures on-demand as it processes the on-disk log. Transactions are allocated on first encounter on-disk and stored in a hash table structure where they are easily accessible for subsequent lookups. Transaction items are also allocated on demand and are attached to the associated transactions. When a commit record is encountered in the log, the transaction is committed to the fs and the in-core structures are freed. If a filesystem crashes or shuts down before all in-core log buffers are flushed to the log, however, not all transactions may have commit records in the log. As expected, the modifications in such an incomplete transaction are not replayed to the fs. The in-core data structures for the partial transaction are never freed, however, resulting in a memory leak. Update xlog_do_recovery_pass() to first correctly initialize the hash table array so empty lists can be distinguished from populated lists on function exit. Update xlog_recover_free_trans() to always remove the transaction from the list prior to freeing the associated memory. Finally, walk the hash table of transaction lists as the last step before it goes out of scope and free any transactions that may remain on the lists. This prevents a memory leak of partial transactions in the log. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
-
- 20 Jun, 2017 7 commits
-
-
Darrick J. Wong authored
bmap returns a dumb LBA address but not the block device that goes with that LBA. Swapfiles don't care about this and will blindly assume that the data volume is the correct blockdev, which is totally bogus for files on the rt subvolume. This results in the swap code doing IOs to arbitrary locations on the data device(!) if the passed in mapping is a realtime file, so just turn off bmap for rt files. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
Expose the readlink variant that doesn't take the inode lock so that the scrubber can inspect symlink contents. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Teach the extended attribute reading functions to pass along a transaction context if one was supplied. The extended attribute scrub code will use transactions to lock buffers and avoid deadlocking with itself in the case of loops; since it will already have the inode locked, also create xattr get/list helpers that don't take locks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Teach the directory reading functions to pass along a transaction context if one was supplied. The directory scrub code will use transactions to lock buffers and avoid deadlocking with itself in the case of loops. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Modify the existing dir leafn lasthash function to enable us to calculate the highest hash value of a leaf1 block. This will be used by the directory scrubbing code to check the sanity of hashes in leaf1 directory blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Refactor the inode fork block counting function to count extents for us at the same time. This will be used by the bmbt scrubber function. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
There is an inconsistency in the way that _bmap_count_blocks deals with delalloc reservations -- if the specified fork is in extents format, *count is set to the total number of blocks referenced by the in-core fork, including delalloc extents. However, if the fork is in btree format, *count is set to the number of blocks referenced by the on-disk fork, which does /not/ include delalloc extents. For the lone existing caller of _bmap_count_blocks this hasn't been an issue because the function is only used to count xattr fork blocks (where there aren't any delalloc reservations). However, when scrub comes along it will use this same function to check di_nblocks against both on-disk extent maps, so we need this behavior to be consistent. Therefore, fix _bmap_count_leaves not to include delalloc extents and remove unnecessary parameters. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
- 19 Jun, 2017 9 commits
-
-
Darrick J. Wong authored
Separate the "clear reflink flag" function into one function that checks if the flag is needed, and a second function that checks and clears the flag. The inode scrub code will want to check the necessity of the flag without clearing it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Adapt _reflink_find_shared to take an optional transaction pointer. The inode scrubber code will need to decide (within transaction context) if a file has shared blocks. To avoid buffer deadlocks, we must pass the tp through to this function's utility calls. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Check the inode cache for a particular inode number. If it's in the cache, check that it's not currently being reclaimed. If it's not being reclaimed, return zero if the inode is allocated. This function will be used by various scrubbers to decide if the cache is more up to date than the disk in terms of checking if an inode is allocated. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Create a function to extract an in-core inobt record from a generic btree_rec union so that scrub will be able to check inobt records and check inode block alignment. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Plumb in the pieces (init_high_key, diff_two_keys) necessary to call query_range on the inode space and block mapping btrees and to extract raw btree records. This will eventually be used by the inobt and bmbt scrubbers. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Export various internal functions so that the online scrubber can use them to check the state of metadata. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
The btree record and key inorder check functions will be used by the btree scrubber code, so make sure they're always built. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
Don't bother wandering our way through the leaf nodes when the caller issues a query_all; just zoom down the left side of the tree and walk rightwards along level zero. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
-