- 04 Nov, 2016 11 commits
-
-
Vivien Didelot authored
Now that we have setters to configure the port's MAC, use them to refactor the port setup and adjust_link code. Note that port's MAC speed, duplex or RGMII delay must not be changed unless the port's link is forced down. So wrap all that in a mv88e6xxx_port_setup_mac function. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
While the two bits for link, duplex or RGMII delays are used the same way on chips supporting the said feature, the two bits for speed have different meaning for most of the chips out there. Speed value is stored in bits 1:0, 0x3 means unforce (normal detection). Some chips reuse values for alternative speeds when bit 12 is set. Newer chips with speed > 1Gbps reuse value 0x3 thus need a new bit 13. Here are the values to write in register 0x1 to (un)force speed: | Speed | 88E6065 | 88E6185 | 88E6352 | 88E6390 | 88E6390X | | ------- | ------- | ------- | ------- | ------- | -------- | | 10 | 0x0000 | 0x0000 | 0x0000 | 0x2000 | 0x2000 | | 100 | 0x0001 | 0x0001 | 0x0001 | 0x2001 | 0x2001 | | 200 | 0x0002 | NA | 0x1001 | 0x3001 | 0x3001 | | 1000 | NA | 0x0002 | 0x0002 | 0x2002 | 0x2002 | | 2500 | NA | NA | NA | 0x3003 | 0x3003 | | 10000 | NA | NA | NA | NA | 0x2003 | | unforce | 0x0003 | 0x0003 | 0x0003 | 0x0000 | 0x0000 | This patch implements a generic mv88e6xxx_port_set_speed() function used by chip-specific wrappers to filter supported ports and speeds. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Some chips such as 88E6352 and 88E6390 can be programmed to add delays to RXCLK for IND inputs or to GTXCLK for OUTD outputs when port is in RGMII mode. Add a port function to program such delays according to the provided PHY interface mode. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Similarly to port's link, add setter to force port's half duplex, full duplex or let normal duplex detection occurs. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Most of the chips will have a port register control bits to force the port's link up, down, or let normal link detection occurs. Implement such operation to use it later when setting duplex, etc. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add port functions to set the port 802.1Q mode. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add port functions to access the ports default VID. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add functions to port files to access the ports default FID. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add a port function to access the Port Based VLAN Map register. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add the port STP state setter to the port files. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The Marvell switches contains one internal SMI device per port, called "Port Registers". Depending on the model, the addresses of these devices start from 0x0, 0x8 or 0x10. Start moving Port Registers specific code to their own files. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Nov, 2016 12 commits
-
-
Simon Horman authored
Support matching on SCTP ports in the same way that matching on TCP and UDP ports is already supported. Example usage: tc qdisc add dev eth0 ingress tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 ip_proto sctp dst_port 80 \ action drop Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Elad Raz authored
The system-status register is actually 16-bit wide and not 8 bit-wide. Fixes: 233fa44b ("mlxsw: pci: Implement reset done check") Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Willem de Bruijn says: ==================== ip: add RECVFRAGSIZE cmsg On IP datagrams and raw sockets, when packets arrive fragmented, expose the largest received fragment size through a new cmsg. Protocols implemented on top of these sockets may use this, for instance, to inform peers to lower MSS on platforms that silently allow send calls to exceed PMTU and cause fragmentation. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
IP6CB and IPCB have a frag_max_size field. In IPv6 this field is filled in when packets are reassembled by the connection tracking code. Also fill in when reassembling in the input path, to expose it through cmsg IPV6_RECVFRAGSIZE in all cases. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
When reading a datagram or raw packet that arrived fragmented, expose the maximum fragment size if recorded to allow applications to estimate receive path MTU. At this point, the field is only recorded when ipv6 connection tracking is enabled. A follow-up patch will record this field also in the ipv6 input path. Tested using the test for IP_RECVFRAGSIZE plus ip netns exec to ip addr add dev veth1 fc07::1/64 ip netns exec from ip addr add dev veth0 fc07::2/64 ip netns exec to ./recv_cmsg_recvfragsize -6 -u -p 6000 & ip netns exec from nc -q 1 -u fc07::1 6000 < payload Both with and without enabling connection tracking ip6tables -A INPUT -m state --state NEW -p udp -j LOG Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
The IP stack records the largest fragment of a reassembled packet in IPCB(skb)->frag_max_size. When reading a datagram or raw packet that arrived fragmented, expose the value to allow applications to estimate receive path MTU. Tested: Sent data over a veth pair of which the source has a small mtu. Sent data using netcat, received using a dedicated process. Verified that the cmsg IP_RECVFRAGSIZE is returned only when data arrives fragmented, and in that cases matches the veth mtu. ip link add veth0 type veth peer name veth1 ip netns add from ip netns add to ip link set dev veth1 netns to ip netns exec to ip addr add dev veth1 192.168.10.1/24 ip netns exec to ip link set dev veth1 up ip link set dev veth0 netns from ip netns exec from ip addr add dev veth0 192.168.10.2/24 ip netns exec from ip link set dev veth0 up ip netns exec from ip link set dev veth0 mtu 1300 ip netns exec from ethtool -K veth0 ufo off dd if=/dev/zero bs=1 count=1400 2>/dev/null > payload ip netns exec to ./recv_cmsg_recvfragsize -4 -u -p 6000 & ip netns exec from nc -q 1 -u 192.168.10.1 6000 < payload using github.com/wdebruij/kerneltools/blob/master/tests/recvfragsize.c Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Neil Armstrong says: ==================== net: stmmac: Add OXNAS DWMAC Glue This patchset add support for the Sysnopsys DWMAC Gigabit Ethernet controller Glue layer of the Oxford Semiconductor OX820 SoC. Changes since v2 at http://lkml.kernel.org/r/20161031105345.16711-1-narmstrong@baylibre.com : - Disable/Unprepare clock if regmap read fails in oxnas_dwmac_init Changes since v1 at https://patchwork.kernel.org/patch/9388231/ : - Split dt-bindings in a separate patch - Add IP version in the dt-bindings compatible - Check return of clk_prepare_enable() - use get_stmmac_bsp_priv() helper - hardwire setup values in oxnas_dwmac_init() Changes since RFC at https://patchwork.kernel.org/patch/9387257 : - Drop init/exit callbacks - Implement proper remove and PM callback - Call init from probe - Disable/Unprepare clock if stmmac probe fails ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Armstrong authored
Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820. Acked-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Cyrill Gorcunov says: ==================== net: Fixes for raw diag sockets handling Hi! Here are a few fixes for raw-diag sockets handling: missing sock_put call and jump for exiting from nested cycle. I made patches for iproute2 as well so will send them out soon. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cyrill Gorcunov authored
I managed to miss that sk_for_each is called under "for" cycle so need to use goto here to return matching socket. CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Ahern <dsa@cumulusnetworks.com> CC: Andrey Vagin <avagin@openvz.org> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cyrill Gorcunov authored
In raw_diag_destroy the helper raw_sock_get returns with sock_hold call, so we have to put it then. CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Ahern <dsa@cumulusnetworks.com> CC: Andrey Vagin <avagin@openvz.org> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Nov, 2016 17 commits
-
-
Govindarajulu Varadarajan authored
Driver sets the skb l4/l3 hash based on NIC_CFG_RSS_HASH_TYPE_*, which is bit mask. This is wrong. Hw actually provides us enum. Use CQ_ENET_RQ_DESC_RSS_TYPE_* to set l3 and l4 hash type. Fixes: bf751ba8 ("driver/net: enic: record q_number and rss_hash for skb") Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Reviewed-by:
David Dillow <dave@thedillows.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
commit ca26893f ("rhashtable: Add rhlist interface") added a field to rhashtable_iter so that length became 56 bytes and would exceed the size of args in netlink_callback (which is 48 bytes). The netlink diag dump function already has been allocating a iter structure and storing the pointed to that in the args of netlink_callback. ila_xlat also uses rhahstable_iter but is still putting that directly in the arg block. Now since rhashtable_iter size is increased we are overwriting beyond the structure. The next field happens to be cb_mutex pointer in netlink_sock and hence the crash. Fix is to alloc the rhashtable_iter and save it as pointer in arg. Tested: modprobe ila ./ip ila add loc 3333:0:0:0 loc_match 2222:0:0:1, ./ip ila list # NO crash now Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cyrill Gorcunov authored
While being preparing patches for killing raw sockets via diag netlink interface I noticed that my runs are stuck: | [root@pcs7 ~]# cat /proc/`pidof ss`/stack | [<ffffffff816d1a76>] __lock_sock+0x80/0xc4 | [<ffffffff816d206a>] lock_sock_nested+0x47/0x95 | [<ffffffff8179ded6>] udp_disconnect+0x19/0x33 | [<ffffffff8179b517>] raw_abort+0x33/0x42 | [<ffffffff81702322>] sock_diag_destroy+0x4d/0x52 which has not been the case before. I narrowed it down to the commit | commit 286c72de | Author: Eric Dumazet <edumazet@google.com> | Date: Thu Oct 20 09:39:40 2016 -0700 | | udp: must lock the socket in udp_disconnect() where we start locking the socket for different reason. So the raw_abort escaped the renaming and we have to fix this typo using __udp_disconnect instead. Fixes: 286c72de ("udp: must lock the socket in udp_disconnect()") CC: David S. Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Ahern <dsa@cumulusnetworks.com> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> CC: Andrey Vagin <avagin@openvz.org> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Woojung Huh authored
To utilize phylib with interrupt fully than handling some of phy stuff in the MAC driver, create irq_domain for USB interrupt EP of phy interrupt and pass the irq number to phy_connect_direct() instead of PHY_IGNORE_INTERRUPT. Idea comes from drivers/gpio/gpio-dl2.c Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
As Ilya Lesokhin suggested, we can collapse two skbs at retransmit time even if the skb at the right has fragments. We simply have to use more generic skb_copy_bits() instead of skb_copy_from_linear_data() in tcp_collapse_retrans() Also need to guard this skb_copy_bits() in case there is nothing to copy, otherwise skb_put() could panic if left skb has frags. Tested: Used following packetdrill test // Establish a connection. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 8> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> +.100 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 write(4, ..., 200) = 200 +0 > P. 1:201(200) ack 1 +.001 write(4, ..., 200) = 200 +0 > P. 201:401(200) ack 1 +.001 write(4, ..., 200) = 200 +0 > P. 401:601(200) ack 1 +.001 write(4, ..., 200) = 200 +0 > P. 601:801(200) ack 1 +.001 write(4, ..., 200) = 200 +0 > P. 801:1001(200) ack 1 +.001 write(4, ..., 100) = 100 +0 > P. 1001:1101(100) ack 1 +.001 write(4, ..., 100) = 100 +0 > P. 1101:1201(100) ack 1 +.001 write(4, ..., 100) = 100 +0 > P. 1201:1301(100) ack 1 +.001 write(4, ..., 100) = 100 +0 > P. 1301:1401(100) ack 1 +.100 < . 1:1(0) ack 1 win 257 <nop,nop,sack 1001:1401> // Check that TCP collapse works : +0 > P. 1:1001(1000) ack 1 Reported-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The old ethtool api (get_setting and set_setting) has generic mii functions mii_ethtool_sset and mii_ethtool_gset. To support the new ethtool api ({get|set}_link_ksettings), we add two generics mii function mii_ethtool_{get|set}_link_ksettings_get. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 XDP TX refactor This patchset refactors the XDP forwarding case, so that its dedicated transmit queues are managed in a complete separation from the other regular ones. It also adds ethtool counters for XDP cases. Series generated against net-next commit: 22ca904a genetlink: fix error return code in genl_register_family() Thanks, Tariq. v3: * Exposed per ring counters. v2: * Added ethtool counters. * Rebased, now patch 2 reverts Brenden's fix, as the bug no longer exists: 958b3d39 ("net/mlx4_en: fixup xdp tx irq to match rx") * Updated commit message of patch 2. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
XDP statistics are reported in ethtool, in total and per ring, as follows: - xdp_drop: the number of packets dropped by xdp. - xdp_tx: the number of packets forwarded by xdp. - xdp_tx_full: the number of times an xdp forward failed due to a full tx xdp ring. In addition, all packets that are dropped/forwarded by XDP are no longer accounted in rx_packets/rx_bytes of the ring, so that they count traffic that is passed to the stack. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Separately manage the two types of TX rings: regular ones, and XDP. Upon an XDP set, do not borrow regular TX rings and convert them into XDP ones, but allocate new ones, unless we hit the max number of rings. Which means that in systems with smaller #cores we will not consume the current TX rings for XDP, while we are still in the num TX limit. XDP TX rings counters are not shown in ethtool statistics. Instead, XDP counters will be added to the respective RX rings in a downstream patch. This has no performance implications. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Support XDP CQ type, and refactor the CQ type enum. Rename the is_tx field to match the change. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
After adding sctp gso, sctp_packet_transmit is a quite big function now. This patch is to extract the codes for packing packet to sctp_packet_pack from sctp_packet_transmit, and add some comments, simplify the err path by freeing auth chunk when freeing packet chunk_list in out path and freeing head skb early if it fails to pack packet. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roi Dayan says: ==================== misc TC/flower changes This series includes two small changes to the TC flower classifier. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roi Dayan authored
Move common code from fl_delete and fl_detroy to __fl_delete. Signed-off-by:
Roi Dayan <roid@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roi Dayan authored
tcf_unbind was called in fl_delete but was missing in fl_destroy when force deleting flows. Fixes: 77b9900e ('tc: introduce Flower classifier') Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-