- 15 Jan, 2017 1 commit
-
-
Arnd Bergmann authored
When CONFIG_HWMON is disabled, we now get a link failure: ERROR: "devm_hwmon_device_register_with_groups" [drivers/ata/ahci_imx.ko] undefined! drivers/ata/ahci_imx.o: In function `imx_ahci_probe': ahci_imx.c:(.text.imx_ahci_probe+0x304): undefined reference to `devm_thermal_zone_of_sensor_register' This makes the code calling into the hwmon subsystem compile-time conditional, and adds a Kconfig dependency to avoid the corner case of having HWMON=m and AHCI_IMX=y, by forcing AHCI_IMX=m in this case. The thermal subsystem already has a check in its header, but that also doesn't cover the THERMAL=m case, so we need a somewhat complex Kconfig expression to handle all cases. Fixes: 54643a83 ("ahci: imx: Add imx53 SATA temperature sensor support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-
- 10 Jan, 2017 9 commits
-
-
Bartlomiej Zolnierkiewicz authored
Add Atari Falcon PATA controller driver. The major difference when compared to legacy IDE's falconide host driver is that we are using polled PIO mode and thus avoiding the need for STDMA locking magic altogether. Tested under ARAnyM emulator. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Bartlomiej Zolnierkiewicz authored
For Atari Falcon PATA support we need to check the current command in its ->sff_data_xfer method. Update core code and all users accordingly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Bartlomiej Zolnierkiewicz authored
When libata was merged m68k lacked IOMAP support. This has not been true for a long time now so allow subsystem to be used on m68k. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
Note of the emulated commands in the pageout/pagein path, so just do a GFP_NOIO dynamic allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
No need to copy a zeroed buffer to the caller if the command is defined to not have a response in the SCSI spec. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
We always need to call ->scsi_done after we've finished emulating a command, so do it in a single place at the end of ata_scsi_simulate. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
It's always the scsi_done callback, and we can get at that easily in the place where ->done is called. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
It's only used in libata-scsi.c, so move it closer to the users. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Christoph Hellwig authored
We only need to look at 4 bytes of the inquiry response for ATAPI devices. Instead of using the global ata_scsi_rbuf just use a a stack buffer. Also factor the fixup into it's own little helper function to make it more readable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org>
-
- 09 Jan, 2017 3 commits
-
-
Geert Uytterhoeven authored
Replace the sparse 256-pointer array for looking up protocol strings by a switch() statement to reduce kernel size. According to bloat-o-meter, this saves 910 bytes on m68k (32-bit), and 1892 bytes on arm64 (64-bit). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Andy Shevchenko authored
Convert to devm_ioremap_resource() which provides more consistent error handling. Note that devm_ioremap_resource() provides its own error messages. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
-
- 06 Jan, 2017 14 commits
-
-
Arvind Yadav authored
Here, If devm_ioremap will fail. It will return NULL. Then hpriv->base = NULL - 0x20000; Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
Damien Le Moal authored
For an ATA device supporting the sense data reporting feature set, a failed command will trigger the execution of ata_eh_request_sense if the result task file of the failed command has the ATA_SENSE bit set (sense data available bit). ata_eh_request_sense executes the REQUEST SENSE DATA EXT command to retrieve the sense data of the failed command. On success of REQUEST SENSE DATA EXT, the ATA_SENSE bit will NOT be set (the command succeeded) but ata_eh_request_sense nevertheless tests the availability of sense data by testing that bit presence in the result tf of the REQUEST SENSE DATA EXT command. This leads us to falsely assume that request sense data failed and to the warning message: atax.xx: request sense failed stat 50 emask 0 Upon success of REQUEST SENSE DATA EXT, set the ATA_SENSE bit in the result task file command so that sense data can be returned by ata_eh_request_sense. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
Uwe Kleine-König authored
The header allows GPL v2 only, so declare "GPL v2" for MODULE_LICENSE Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Csaba Kertesz authored
Add a hwmon entry to get the temperature from the die of imx53 SATA. The original patch was made by Richard Zhu for kernel 2.6.x: ENGR00134041-MX53-Add-the-SATA-AHCI-temperature-monitor.patch Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Tejun Heo authored
Marko reports that CX1-JB512-HP shows the same timeout issues as CX1-JB256-HP. Let's apply MAX_SEC_128 to all devices in the series. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Marko Koski-Vähälä <marko@koski-vahala.com> Cc: stable@vger.kernel.org # v3.19+
-
Michał Kępień authored
acpi_get_object_info() allocates the returned structure, which the caller has to free when the call succeeds. Free it when appropriate. Fixes: c9802a4b ("ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.") Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/libata.ko] undefined! To fix this, protect the DMA code by #ifdef CONFIG_HAS_DMA, and provide dummies of ata_sg_clean() and ata_sg_setup() for the !CONFIG_HAS_DMA case. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
Commit 70e6ad0c ("[PATCH] libata: prepare ata_sg_clean() for invocation from EH") made ata_sg_clean() global, but no user outside libata-core.c has ever materialized. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/libahci_platform.ko] undefined! ERROR: "dmam_alloc_coherent" [drivers/ata/libahci.ko] undefined! Add a block dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dmam_alloc_coherent" [drivers/ata/libata.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/ata/sata_highbank.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_pool_alloc" [drivers/ata/sata_mv.ko] undefined! ERROR: "dmam_pool_create" [drivers/ata/sata_mv.ko] undefined! ERROR: "dma_pool_free" [drivers/ata/sata_mv.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Tejun Heo <tj@kernel.org>
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Just two small fixes for platform drivers x86: - use brightness_set_blocking for LED-setting callbacks on Fujitsu laptops - fix surface3_button build errors" * tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: fujitsu-laptop: use brightness_set_blocking for LED-setting callbacks platform/x86: fix surface3_button build errors
-
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit fixes from Paul Moore: "Two small fixes relating to audit's use of fsnotify. The first patch plugs a leak and the second fixes some lock shenanigans. The patches are small and I banged on this for an afternoon with our testsuite and didn't see anything odd" * 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit: audit: Fix sleep in atomic fsnotify: Remove fsnotify_duplicate_mark()
-
- 05 Jan, 2017 7 commits
-
-
git://anongit.freedesktop.org/git/drm-intelLinus Torvalds authored
Pull i915 drm fixes from Jani Nikula: "Here's a bunch of drm/i915 fixes for v4.10-rc3. It includes GVT-g fixes. My new year's resolution is to start using signed tags for pulls. If that feels like a déjà vu, it's ((new year's) resolution), not (new (year's resolution))" [ Taking this directly from Jani because Dave Airlie is only partially connected right now. - Linus ] * tag 'drm-intel-fixes-2017-01-05' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Prevent timeline updates whilst performing reset drm/i915: Silence allocation failure during sg_trim() drm/i915: Don't clflush before release phys object drm/i915: Fix oops in overlay due to frontbuffer tracking drm/i915: Fix oopses in the overlay code due to i915_gem_active stuff drm/i915: Initialize overlay->last_flip properly drm/i915: Move the min_pixclk[] handling to the end of readout drm/i915: Force VDD off on the new power seqeuencer before starting to use it drm/i915/gvt: fix typo in cfg_space range check drm/i915/gvt: fix an issue in emulating cfg space PCI_COMMAND drm/i915/gvt/kvmgt: trival: code cleanup drm/i915/gvt/kvmgt: prevent double-release of vgpu drm/i915/gvt/kvmgt: check returned slot for gfn drm/i915/gvt/kvmgt: dereference the pointer within lock drm/i915/gvt: reset the GGTT entry when vGPU created drm/i915/gvt: fix an error in opregion handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Three small pin control fixes for the v4.10 series. Very little to say about them, just driver fixes. - one fix to the AMD pinctrl ACPI glue - fix requests on the Meson driver - fix bitfield widths on Samsungs Exynos 5433" * tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433 pinctrl: meson: fix gpio request disabling other modes pinctrl/amd: Set the level based on ACPI tables
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "This is a rather large set of bugfixes, as we just returned from the Christmas break. Most of these are relatively unimportant fixes for regressions introduced during the merge window, and about half of the changes are for mach-omap2. A couple of patches are just cleanups and dead code removal that I would not normally have considered for merging after -rc2, but I decided to take them along with the fixes this time. Notable fixes include: - removing the skeleton.dtsi include broke a number of machines, and we have to put empty /chosen nodes back to be able to pass kernel command lines as before - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as it had been for no good reason for a long time" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code drivers: psci: annotate timer on stack to silence odebug messages ARM64: defconfig: enable DRM_MESON as module ARM64: dts: meson-gx: Add Graphic Controller nodes ARM64: dts: meson-gxl: fix GPIO include ARM: dts: imx6: Disable "weim" node in the dtsi files ARM: dts: qcom: apq8064: Add missing scm clock ARM: davinci: da8xx: Fix sleeping function called from invalid context ARM: davinci: Make __clk_{enable,disable} functions public ARM: davinci: da850: don't add emac clock to lookup table twice ARM: davinci: da850: fix infinite loop in clk_set_rate() ARM: i.MX: remove map_io callback ARM: dts: vf610-zii-dev-rev-b: Add missing newline ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry ARM: dts: imx31: fix AVIC base address ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn arm64: dts: vexpress: Support GICC_DIR operations ARM: dts: vexpress: Support GICC_DIR operations firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares arm64: dts: msm8996: Add required memory carveouts ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes and cleanups from Juergen Gross: - small fixes for xenbus driver - one fix for xen dom0 boot on huge system - small cleanups * tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen: ARM: Zero reserved fields of xatp before making hypervisor call xen: events: Replace BUG() with BUG_ON() xen: remove stale xs_input_avail() from header xen: return xenstore command failures via response instead of rc xen: xenbus driver must not accept invalid transaction ids xen/evtchn: use rb_entry() xen/setup: Don't relocate p2m over existing one
-
Nicholas Piggin authored
Rather than keep a list of all possible compression types in the Makefile, set the target explicitly from Kconfig. Reviewed-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicholas Piggin authored
When using initramfs compression, the data file compression suffix gets quotes pulled in from Kconfig, e.g., initramfs_data.cpio".gz" which make does not match a target and causes rebuild. Fix this by filtering out quotes from the Kconfig string. Fixes: 35e669e1 ("initramfs: select builtin initram compression algorithm on KConfig instead of Makefile") Reviewed-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - fixes for crashes and double-cleanup errors - XFS maintainership handover - fix to prevent absurdly large block reservations - fix broken sysfs getter/setters * tag 'xfs-for-linus-4.10-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix max_retries _show and _store functions xfs: update MAINTAINERS xfs: fix crash and data corruption due to removal of busy COW extents xfs: use the actual AG length when reserving blocks xfs: fix double-cleanup when CUI recovery fails
-
- 04 Jan, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) stmmac_drv_probe() can race with stmmac_open() because we register the netdevice too early. Fix from Florian Fainelli. 2) UFO handling in __ip6_append_data() and ip6_finish_output() use different tests for deciding whether a frame will be fragmented or not, put them in sync. Fix from Zheng Li. 3) The rtnetlink getstats handlers need to validate that the netlink request is large enough, fix from Mathias Krause. 4) Use after free in mlx4 driver, from Jack Morgenstein. 5) Fix setting of garbage UID value in sockets during setattr() calls, from Eric Biggers. 6) Packet drop_monitor doesn't format the netlink messages properly such that nlmsg_next fails to work, fix from Reiter Wolfgang. 7) Fix handling of wildcard addresses in l2tp lookups, from Guillaume Nault. 8) __skb_flow_dissect() can crash on pptp packets, from Ian Kumlien. 9) IGMP code doesn't reset group query timers properly, from Michal Tesar. 10) Fix overzealous MAIN/LOCAL route table combining in ipv4, from Alexander Duyck. 11) vxlan offload check needs to be more strict in be2net driver, from Sabrina Dubroca. 12) Moving l3mdev to packet hooks lost RX stat counters unintentionally, fix from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) sh_eth: enable RX descriptor word 0 shift on SH7734 sfc: don't report RX hash keys to ethtool when RSS wasn't enabled dpaa_eth: Initialize CGR structure before init dpaa_eth: cleanup after init_phy() failure net: systemport: Pad packet before inserting TSB net: systemport: Utilize skb_put_padto() LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK libcxgb: fix error check for ip6_route_output() net: usb: asix_devices: add .reset_resume for USB PM net: vrf: Add missing Rx counters drop_monitor: consider inserted data in genlmsg_end benet: stricter vxlan offloading check in be_features_check ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules net: macb: Updated resource allocation function calls to new version of API. net: stmmac: dwmac-oxnas: use generic pm implementation net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks net: stmmac: dwmac-oxnas: fix of-node leak Documentation/networking: fix typo in mpls-sysctl igmp: Make igmp group member RFC 3376 compliant flow_dissector: Update pptp handling to avoid null pointer deref. ...
-
Sergei Shtylyov authored
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25 (bits 0-15 usually used for that are occupied by the packet checksum). Thus we need to set the 'shift_rd0' field in the SH7734 SoC data... Fixes: f0e81fec ("net: sh_eth: Add support SH7734") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
If we failed to set up RSS on EF10 (e.g. because firmware declared RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report no fields, rather than confusingly reporting what fields we _would_ be hashing on if RSS was working. Fixes: dcb4123c ("sfc: disable RSS when unsupported") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Madalin Bucur says: ==================== dpaa_eth: a couple of fixes Add cleanup on PHY initialization failure path, avoid using uninitialized memory at CGR init. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roy Pledge authored
The QBMan CGR options needs to be zeroed before calling the init function Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-