Support setting `expected_attach_type` at prog load time in both
`bpf/bpf.h` and `bpf/libbpf.h`.

Since both headers already have API to load programs, new functions are
added not to break backward compatibility for existing ones:
* `bpf_load_program_xattr()` is added to `bpf/bpf.h`;
* `bpf_prog_load_xattr()` is added to `bpf/libbpf.h`.

Both new functions accept structures, `struct bpf_load_program_attr` and
`struct bpf_prog_load_attr` correspondingly, where new fields can be
added in the future w/o changing the API.

Standard `_xattr` suffix is used to name the new API functions.

Since `bpf_load_program_name()` is not used as heavily as
`bpf_load_program()`, it was removed in favor of more generic
`bpf_load_program_xattr()`.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

== The problem ==

There are use-cases when a program of some type can be attached to
multiple attach points and those attach points must have different
permissions to access context or to call helpers.

E.g. context structure may have fields for both IPv4 and IPv6 but it
doesn't make sense to read from / write to IPv6 field when attach point
is somewhere in IPv4 stack.

Same applies to BPF-helpers: it may make sense to call some helper from
some attach point, but not from other for same prog type.

== The solution ==

Introduce `expected_attach_type` field in in `struct bpf_attr` for
`BPF_PROG_LOAD` command. If scenario described in "The problem" section
is the case for some prog type, the field will be checked twice:

1) At load time prog type is checked to see if attach type for it must
   be known to validate program permissions correctly. Prog will be
   rejected with EINVAL if it's the case and `expected_attach_type` is
   not specified or has invalid value.

2) At attach time `attach_type` is compared with `expected_attach_type`,
   if prog type requires to have one, and, if they differ, attach will
   be rejected with EINVAL.

The `expected_attach_type` is now available as part of `struct bpf_prog`
in both `bpf_verifier_ops->is_valid_access()` and
`bpf_verifier_ops->get_func_proto()` () and can be used to check context
accesses and calls to helpers correspondingly.

Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and
Daniel Borkmann <daniel@iogearbox.net> here:
https://marc.info/?l=linux-netdev&m=152107378717201&w=2Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Prashant Bhole says:

====================
These patches fix sg api usage in sockmap. Previously sockmap didn't
use sg_init_table(), which caused hitting BUG_ON in sg api, when
CONFIG_DEBUG_SG is enabled

v1: added sg_init_table() calls wherever needed.

v2:
- Patch1 adds new helper function in sg api. sg_init_marker()
- Patch2 sg_init_marker() and sg_init_table() in appropriate places

Backgroud:
While reviewing v1, John Fastabend raised a valid point about
unnecessary memset in sg_init_table() because sockmap uses sg table
which embedded in a struct. As enclosing struct is zeroed out, there
is unnecessary memset in sg_init_table.

So Daniel Borkmann suggested to define another static inline function
in scatterlist.h which only initializes sg_magic. Also this function
will be called from sg_init_table. From this suggestion I defined a
function sg_init_marker() which sets sg_magic and calls sg_mark_end()
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When CONFIG_DEBUG_SG is set, sg->sg_magic is initialized in
sg_init_table() and it is verified in sg api while navigating. We hit
BUG_ON when magic check is failed.

In functions sg_tcp_sendpage and sg_tcp_sendmsg, the struct containing
the scatterlist is already zeroed out. So to avoid extra memset, we
use sg_init_marker() to initialize sg_magic.

Fixed following things:
- In bpf_tcp_sendpage: initialize sg using sg_init_marker
- In bpf_tcp_sendmsg: Replace sg_init_table with sg_init_marker
- In bpf_tcp_push: Replace memset with sg_init_table where consumed
  sg entry needs to be re-initialized.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

sg_init_marker initializes sg_magic in the sg table and calls
sg_mark_end() on the last entry of the table. This can be useful to
avoid memset in sg_init_table() when scatterlist is already zeroed out

For example: when scatterlist is embedded inside other struct and that
container struct is zeroed out
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

John Fastabend says:

====================
This series adds the BPF_F_INGRESS flag support to the redirect APIs.
Bringing the sockmap API in-line with the cls_bpf redirect APIs.

We add it to both variants of sockmap programs, the first patch adds
support for tx ulp hooks and the third patch adds support for the recv
skb hooks. Patches two and four add tests for the corresponding
ingress redirect hooks.

Follow on patches can address busy polling support, but next series
from me will move the sockmap sample program into selftests.

v2: added static to function definition caught by kbuild bot
v3: fixed an error branch with missing mem_uncharge
    in recvmsg op moved receive_queue check outside of RCU region
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add BPF_SK_SKB_STREAM_VERDICT tests for ingress hook. While
we do this also bring stream tests in-line with MSG based
testing.

A map for skb options is added for userland to push options
at BPF programs.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add support for the BPF_F_INGRESS flag in skb redirect helper. To
do this convert skb into a scatterlist and push into ingress queue.
This is the same logic that is used in the sk_msg redirect helper
so it should feel familiar.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a set of tests to verify ingress flag in redirect helpers
works correctly with various msg sizes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add support for the BPF_F_INGRESS flag in sk_msg redirect helper.
To do this add a scatterlist ring for receiving socks to check
before calling into regular recvmsg call path. Additionally, because
the poll wakeup logic only checked the skb recv queue we need to
add a hook in TCP stack (similar to write side) so that we have
a way to wake up polling socks when a scatterlist is redirected
to that sock.

After this all that is needed is for the redirect helper to
push the scatterlist into the psock receive queue.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
This set adds support for update and delete calls from the datapath,
as well as XADD instructions (32 and 64 bit) and pseudo random numbers.
The XADD support depends on verifier enforcing alignment which Daniel
recently added.  XADD uses NFP's atomic engine which requires values
to be in big endian, therefore we need to keep track of which parts of
the values are used as atomics and byte swap them accordingly.  Pseudo
random numbers are generated using NFP's HW pseudo random number
generator.

Jiong tackles initial implementation of packet cache, which he describes
as follows:

Memory reads on NFP would first fetch data from memory to transfer-in
registers, then move them from transfer-in to general registers.

Given NFP is rich on transfer-in registers, they could serve as memory
cache.

This patch tries to identify a sequence of packet data read (BPF_LDX) that
are executed sequentially, then the total access range of the sequence is
calculated and attached to each read instruction, the first instruction
in this sequence is marked with an cache init flag so the execution of
it would bring in the whole range of packet data for the sequence.

All later packet reads in this sequence would fetch data from transfer-in
registers directly, no need to JIT NFP memory access.

Function call, non-packet-data memory read, packet write and memcpy will
invalidate the cache and start a new cache range.

Cache invalidation could be improved in the future, for example packet
write doesn't need to invalidate the cache if the the write destination
won't be read again.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When FW responds with a message of wrong size or type make sure
the type is checked first and included in the wrong size message.
This makes it easier to figure out which FW command failed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

NFP has a prng register, which we can read to obtain a u32 worth
of pseudo random data.  Generate code for it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Allow atomic add to be used even when the value is not guaranteed
to fit into a 16 bit immediate.  This requires the value to be pulled
as data, and therefore use of a transfer register and a context swap.

Track the information about possible lengths of the value, if it's
guaranteed to be larger than 16bits don't generate the code for the
optimized case at all.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Allow callers to control the delay slots of commands, instead of
giving them just a wait/nowait choice.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Implement atomic add operation for 32 and 64 bit values.  Depend
on the verifier to ensure alignment.  Values have to be kept in
big endian and swapped upon read/write.  For now only support
atomic add of a constant.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

BPF_LDST_BYTES() does not put it's argument in parenthesis
when referencing it.  This makes it impossible to pass pointers
obtained by address-of operator (e.g. BPF_LDST_BYTES(&insn)).
Add the parenthesis.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Support calling map_delete_elem() FW helper from the datapath
programs.  For JIT checks and code are basically equivalent
to map lookups.  Similarly to other map helper key must be on
the stack.  Different pointer types are left for future extension.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Support calling map_update_elem() from the datapath programs
by calling into FW-provided helper.  Value pointer is passed
in LM pointer #2.  Keeping track of old state for arg3 is not
necessary, since LM pointer #2 will be always loaded in this
case, the trivial optimization for value at the bottom of the
stack can't be done here.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add a verifier helper for performing the basic state checks
before a call to a map helper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Our implementation has restriction on stack pointers for function
calls.  Move the common checks into a helper for reuse.  The state
has to be encapsulated into a structure to support parameters
other than BPF_REG_2.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We will reuse most of map call code gen for other map calls.
Rename the lookup gen function and use meta->func_id instead
of hard-coding lookup.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch is the front end of this optimisation, it detects and marks
those packet reads that could be cached. Then the optimisation "backend"
will be activated automatically.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch add the support for unaligned read offset, i.e. the read offset
to the start of packet cache area is not aligned to REG_WIDTH. In this
case, the read area might across maximum three transfer-in registers.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch assumes there is a packet data cache, and would try to read
packet data from the cache instead of from memory.

This patch only implements the optimisation "backend", it doesn't build
the packet data cache, so this optimisation is not enabled.

This patch has only enabled aligned packet data read, i.e. when the read
offset to the start of cache is REG_WIDTH aligned.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Alexei Starovoitov says:

====================
v7->v8:
- moved 'u32 num_args' from 'struct tracepoint' into 'struct bpf_raw_event_map'
  that increases memory overhead, but can be optimized/compressed later.
  Now it's zero changes in tracepoint.[ch]

v6->v7:
- adopted Steven's bpf_raw_tp_map section approach to find tracepoint
  and corresponding bpf probe function instead of kallsyms approach.
  dropped kernel_tracepoint_find_by_name() patch

v5->v6:
- avoid changing semantics of for_each_kernel_tracepoint() function, instead
  introduce kernel_tracepoint_find_by_name() helper

v4->v5:
- adopted Daniel's fancy REPEAT macro in bpf_trace.c in patch 6

v3->v4:
- adopted Linus's CAST_TO_U64 macro to cast any integer, pointer, or small
  struct to u64. That nicely reduced the size of patch 1

v2->v3:
- with Linus's suggestion introduced generic COUNT_ARGS and CONCATENATE macros
  (or rather moved them from apparmor)
  that cleaned up patch 6
- added patch 4 to refactor trace_iwlwifi_dev_ucode_error() from 17 args to 4
  Now any tracepoint with >12 args will have build error

v1->v2:
- simplified api by combing bpf_raw_tp_open(name) + bpf_attach(prog_fd) into
  bpf_raw_tp_open(name, prog_fd) as suggested by Daniel.
  That simplifies bpf_detach as well which is now simple close() of fd.
- fixed memory leak in error path which was spotted by Daniel.
- fixed bpf_get_stackid(), bpf_perf_event_output() called from raw tracepoints
- added more tests
- fixed allyesconfig build caught by buildbot

v1:
This patch set is a different way to address the pressing need to access
task_struct pointers in sched tracepoints from bpf programs.

The first approach simply added these pointers to sched tracepoints:
https://lkml.org/lkml/2017/12/14/753
which Peter nacked.
Few options were discussed and eventually the discussion converged on
doing bpf specific tracepoint_probe_register() probe functions.
Details here:
https://lkml.org/lkml/2017/12/20/929

Patch 1 is kernel wide cleanup of pass-struct-by-value into
pass-struct-by-reference into tracepoints.

Patches 2 and 3 are minor cleanups to address allyesconfig build

Patch 4 refactor trace_iwlwifi_dev_ucode_error from 17 to 4 args

Patch 5 introduces COUNT_ARGS macro

Patch 6 introduces BPF_RAW_TRACEPOINT api.
the auto-cleanup and multiple concurrent users are must have
features of tracing api. For bpf raw tracepoints it looks like:
  // load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type
  prog_fd = bpf_prog_load(...);

  // receive anon_inode fd for given bpf_raw_tracepoint
  // and attach bpf program to it
  raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd);

Ctrl-C of tracing daemon or cmdline tool will automatically
detach bpf program, unload it and unregister tracepoint probe.
More details in patch 6.

Patch 7 - trivial support in libbpf
Patches 8, 9 - user space tests

samples/bpf/test_overhead performance on 1 cpu:

tracepoint    base  kprobe+bpf tracepoint+bpf raw_tracepoint+bpf
task_rename   1.1M   769K        947K            1.0M
urandom_read  789K   697K        750K            755K
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

similar to traditional traceopint test add bpf_get_stackid() test
from raw tracepoints
and reduce verbosity of existing stackmap test
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

add empty raw_tracepoint bpf program to test overhead similar
to kprobe and traditional tracepoint tests
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

add bpf_raw_tracepoint_open(const char *name, int prog_fd) api to libbpf
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access
kernel internal arguments of the tracepoints in their raw form.

>From bpf program point of view the access to the arguments look like:
struct bpf_raw_tracepoint_args {
       __u64 args[0];
};

int bpf_prog(struct bpf_raw_tracepoint_args *ctx)
{
  // program can read args[N] where N depends on tracepoint
  // and statically verified at program load+attach time
}

kprobe+bpf infrastructure allows programs access function arguments.
This feature allows programs access raw tracepoint arguments.

Similar to proposed 'dynamic ftrace events' there are no abi guarantees
to what the tracepoints arguments are and what their meaning is.
The program needs to type cast args properly and use bpf_probe_read()
helper to access struct fields when argument is a pointer.

For every tracepoint __bpf_trace_##call function is prepared.
In assembler it looks like:
(gdb) disassemble __bpf_trace_xdp_exception
Dump of assembler code for function __bpf_trace_xdp_exception:
   0xffffffff81132080 <+0>:     mov    %ecx,%ecx
   0xffffffff81132082 <+2>:     jmpq   0xffffffff811231f0 <bpf_trace_run3>

where

TRACE_EVENT(xdp_exception,
        TP_PROTO(const struct net_device *dev,
                 const struct bpf_prog *xdp, u32 act),

The above assembler snippet is casting 32-bit 'act' field into 'u64'
to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is.
All of ~500 of __bpf_trace_*() functions are only 5-10 byte long
and in total this approach adds 7k bytes to .text.

This approach gives the lowest possible overhead
while calling trace_xdp_exception() from kernel C code and
transitioning into bpf land.
Since tracepoint+bpf are used at speeds of 1M+ events per second
this is valuable optimization.

The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced
that returns anon_inode FD of 'bpf-raw-tracepoint' object.

The user space looks like:
// load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type
prog_fd = bpf_prog_load(...);
// receive anon_inode fd for given bpf_raw_tracepoint with prog attached
raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd);

Ctrl-C of tracing daemon or cmdline tool that uses this feature
will automatically detach bpf program, unload it and
unregister tracepoint probe.

On the kernel side the __bpf_raw_tp_map section of pointers to
tracepoint definition and to __bpf_trace_*() probe function is used
to find a tracepoint with "xdp_exception" name and
corresponding __bpf_trace_xdp_exception() probe function
which are passed to tracepoint_probe_register() to connect probe
with tracepoint.

Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf
tracepoint mechanisms. perf_event_open() can be used in parallel
on the same tracepoint.
Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted.
Each with its own bpf program. The kernel will execute
all tracepoint probes and all attached bpf programs.

In the future bpf_raw_tracepoints can be extended with
query/introspection logic.

__bpf_raw_tp_map section logic was contributed by Steven Rostedt
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

move COUNT_ARGS() macro from apparmor to generic header and extend it
to count till twelve.

COUNT() was an alternative name for this logic, but it's used for
different purpose in many other places.

Similarly for CONCATENATE() macro.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table
instead of all 17 arguments by value.
dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table'
defined with very similar yet subtly different fields and offsets.
tracepoint is still common and using definition of 'struct iwl_error_event_table'
from dvm/commands.h while copying fields.
Long term this tracepoint probably should be split into two.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

two trace events defined with the same name and both unused.
They conflict in allyesconfig build. Rename one of them.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

two trace events defined with the same name and both unused.
They conflict in allyesconfig build. Rename one of them.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value
- convert 'type array[]' tracepoint arguments into 'type *array',
  since compiler will warn that sizeof('type array[]') == sizeof('type *array')
  and later should be used instead

The CAST_TO_U64 macro in the later patch will enforce that tracepoint
arguments can only be integers, pointers, or less than 8 byte structures.
Larger structures should be passed by reference.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sample usage for tos ...

  bpf_getsockopt(skops, SOL_IP, IP_TOS, &v, sizeof(v))

... where skops is a pointer to the ctx (struct bpf_sock_ops).
Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Trivial fix to spelling mistake in error message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Generally we do a preload before doing idr allocation. This also help
improve the allocation success rate in memory pressure.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Martin KaFai Lau says:

====================
This patch set has some changes and clean-up works for
the bpf_verifier_log.  They are the prep works for the
BTF (BPF Type Format).
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The BTF (BPF Type Format) verifier needs to reuse the current
BPF verifier log.  Hence, it requires the following changes:

(1) Expose log_write() in verifier.c for other users.
    Its name is renamed to bpf_verifier_vlog().

(2) The BTF verifier also needs to check
'log->level && log->ubuf && !bpf_verifier_log_full(log);'
independently outside of the current log_write().  It is
because the BTF verifier will do one-check before
making multiple calls to btf_verifier_vlog to log
the details of a type.

Hence, this check is also re-factored to a new function
bpf_verifier_log_needed().  Since it is re-factored,
we can check it before va_start() in the current
bpf_verifier_log_write() and verbose().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>