Make sure to invoke pci_disable_device() when errors occur in
pcnet32_probe_pci().
Signed-off-by: Bo Chen <chenbo@pdx.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

ILT entry requires 12 bit right shifted physical address.
Existing mask for ILT entry of physical address i.e.
ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit
address because upper 8 bits of 64 bit address were getting
masked which resulted in completer abort error on
PCIe bus due to invalid address.

Fix that mask to handle 64bit physical address.

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 8fb472c0 ("ipmr: improve hash scalability")
added a call to rhltable_init() without checking its return value.

This problem was then later copied to IPv6 and factorized in commit
0bbbf0e7 ("ipmr, ip6mr: Unite creation of new mr_table")

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 31552 Comm: syz-executor7 Not tainted 4.17.0-rc5+ #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rht_key_hashfn include/linux/rhashtable.h:277 [inline]
RIP: 0010:__rhashtable_lookup include/linux/rhashtable.h:630 [inline]
RIP: 0010:rhltable_lookup include/linux/rhashtable.h:716 [inline]
RIP: 0010:mr_mfc_find_parent+0x2ad/0xbb0 net/ipv4/ipmr_base.c:63
RSP: 0018:ffff8801826aef70 EFLAGS: 00010203
RAX: 0000000000000001 RBX: 0000000000000001 RCX: ffffc90001ea0000
RDX: 0000000000000079 RSI: ffffffff8661e859 RDI: 000000000000000c
RBP: ffff8801826af1c0 R08: ffff8801b2212000 R09: ffffed003b5e46c2
R10: ffffed003b5e46c2 R11: ffff8801daf23613 R12: dffffc0000000000
R13: ffff8801826af198 R14: ffff8801cf8225c0 R15: ffff8801826af658
FS:  00007ff7fa732700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000003ffffff9c CR3: 00000001b0210000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ip6mr_cache_find_parent net/ipv6/ip6mr.c:981 [inline]
 ip6mr_mfc_delete+0x1fe/0x6b0 net/ipv6/ip6mr.c:1221
 ip6_mroute_setsockopt+0x15c6/0x1d70 net/ipv6/ip6mr.c:1698
 do_ipv6_setsockopt.isra.9+0x422/0x4660 net/ipv6/ipv6_sockglue.c:163
 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:922
 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1060
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 8fb472c0 ("ipmr: improve hash scalability")
Fixes: 0bbbf0e7 ("ipmr, ip6mr: Unite creation of new mr_table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported the use-after-free in timer_is_static_object() [1].

This can happen because the structure for the rto timer (ccid2_hc_tx_sock)
is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be
called after that.

The report [1] is similar to the one in commit 120e9dab ("dccp:
defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same,
delay freeing ccid2_hc_tx_sock structure, so that it is freed in
dccp_sk_destruct().

[1]

==================================================================
BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90
kernel/time/timer.c:607
Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299

CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  timer_is_static_object+0x80/0x90 kernel/time/timer.c:607
  debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508
  debug_timer_activate kernel/time/timer.c:709 [inline]
  debug_activate kernel/time/timer.c:764 [inline]
  __mod_timer kernel/time/timer.c:1041 [inline]
  mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102
  sk_reset_timer+0x22/0x60 net/core/sock.c:2742
  ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147
  call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
  expire_timers kernel/time/timer.c:1363 [inline]
  __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
  run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d1/0x200 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:525 [inline]
  smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
  </IRQ>
...
Allocated by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
  kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
  ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151
  dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44
  __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344
  dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538
  dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128
  dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408
  dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415
  dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197
  dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841
  ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256
  dst_input include/net/dst.h:450 [inline]
  ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492
  __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592
  __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657
  process_backlog+0x219/0x760 net/core/dev.c:5337
  napi_poll net/core/dev.c:5735 [inline]
  net_rx_action+0x7b7/0x1930 net/core/dev.c:5801
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285

Freed by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
  ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190
  dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286
  dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045
  inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
  inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
  sock_release+0x96/0x1b0 net/socket.c:594
  sock_close+0x16/0x20 net/socket.c:1149
  __fput+0x34d/0x890 fs/file_table.c:209
  ____fput+0x15/0x20 fs/file_table.c:243
  task_work_run+0x1e4/0x290 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:191 [inline]
  exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166
  prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
  do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801bebb4cc0
  which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1112 bytes inside of
  1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198)
The buggy address belongs to the page:
page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0
index:0xffff8801bebb5240 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003
raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000
page dumped because: kasan: bad access detected
...
==================================================================

Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In divasmain.c, the function divas_write() firstly invokes the function
diva_xdi_open_adapter() to open the adapter that matches with the adapter
number provided by the user, and then invokes the function diva_xdi_write()
to perform the write operation using the matched adapter. The two functions
diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c.

In diva_xdi_open_adapter(), the user command is copied to the object 'msg'
from the userspace pointer 'src' through the function pointer 'cp_fn',
which eventually calls copy_from_user() to do the copy. Then, the adapter
number 'msg.adapter' is used to find out a matched adapter from the
'adapter_queue'. A matched adapter will be returned if it is found.
Otherwise, NULL is returned to indicate the failure of the verification on
the adapter number.

As mentioned above, if a matched adapter is returned, the function
diva_xdi_write() is invoked to perform the write operation. In this
function, the user command is copied once again from the userspace pointer
'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as
both of them are from the 'buf' pointer in divas_write(). Similarly, the
copy is achieved through the function pointer 'cp_fn', which finally calls
copy_from_user(). After the successful copy, the corresponding command
processing handler of the matched adapter is invoked to perform the write
operation.

It is obvious that there are two copies here from userspace, one is in
diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of
these two copies share the same source userspace pointer, i.e., the 'buf'
pointer in divas_write(). Given that a malicious userspace process can race
to change the content pointed by the 'buf' pointer, this can pose potential
security issues. For example, in the first copy, the user provides a valid
adapter number to pass the verification process and a valid adapter can be
found. Then the user can modify the adapter number to an invalid number.
This way, the user can bypass the verification process of the adapter
number and inject inconsistent data.

This patch reuses the data copied in
diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the
above issues can be avoided.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there is no license information in the header of
this file.

The MODULE_LICENSE field contains ("GPL"), which means
GNU Public License v2 or later, so add a corresponding
SPDX license identifier.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags
param can't be passed into its proto .connect where this flags is really
needed.

sctp works around it by getting flags from socket file in __sctp_connect.
It works for connecting from userspace, as inherently the user sock has
socket file and it passes f_flags as the flags param into the proto_ops
.connect.

However, the sock created by sock_create_kern doesn't have a socket file,
and it passes the flags (like O_NONBLOCK) by using the flags param in
kernel_connect, which calls proto_ops .connect later.

So to fix it, this patch defines a new proto_ops .connect for sctp,
sctp_inet_connect, which calls __sctp_connect() directly with this
flags param. After this, the sctp's proto .connect can be removed.

Note that sctp_inet_connect doesn't need to do some checks that are not
needed for sctp, which makes thing better than with inet_dgram_connect.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS fixes from James Hogan:

 - fix build with DEBUG_ZBOOT and MACH_JZ4770 (4.16)

 - include xilfpga FDT in fitImage and stop generating dtb.o (4.15)

 - fix software IO coherence on CM SMP systems (4.8)

 - ptrace: Fix PEEKUSR/POKEUSR to o32 FGRs (3.14)

 - ptrace: Expose FIR register through FP regset (3.13)

 - fix typo in KVM debugfs file name (3.10)

* tag 'mips_fixes_4.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
  MIPS: xilfpga: Actually include FDT in fitImage
  MIPS: xilfpga: Stop generating useless dtb.o
  KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
  MIPS: ptrace: Expose FIR register through FP regset
  MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4770
  MIPS: c-r4k: Fix data corruption related to cache coherence

Pull networking fixes from David Miller:

 1) Fix refcounting bug for connections in on-packet scheduling mode of
    IPVS, from Julian Anastasov.

 2) Set network header properly in AF_PACKET's packet_snd, from Willem
    de Bruijn.

 3) Fix regressions in 3c59x by converting to generic DMA API. It was
    relying upon the hack that the PCI DMA interfaces would accept NULL
    for EISA devices. From Christoph Hellwig.

 4) Remove RDMA devices before unregistering netdev in QEDE driver, from
    Michal Kalderon.

 5) Use after free in TUN driver ptr_ring usage, from Jason Wang.

 6) Properly check for missing netlink attributes in SMC_PNETID
    requests, from Eric Biggers.

 7) Set DMA mask before performaing any DMA operations in vmxnet3
    driver, from Regis Duchesne.

 8) Fix mlx5 build with SMP=n, from Saeed Mahameed.

 9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.

10) Tuntap use after free during release, from Jason Wang.

11) Don't use stack memory in scatterlists in tls code, from Matt
    Mullins.

12) Not fully initialized flow key object in ipv4 routing code, from
    David Ahern.

13) Various packet headroom bug fixes in ip6_gre driver, from Petr
    Machata.

14) Remove queues from XPS maps using correct index, from Amritha
    Nambiar.

15) Fix use after free in sock_diag, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
  net: ip6_gre: fix tunnel metadata device sharing.
  cxgb4: fix offset in collecting TX rate limit info
  net: sched: red: avoid hashing NULL child
  sock_diag: fix use-after-free read in __sk_free
  sh_eth: Change platform check to CONFIG_ARCH_RENESAS
  net: dsa: Do not register devlink for unused ports
  net: Fix a bug in removing queues from XPS map
  bpf: fix truncated jump targets on heavy expansions
  bpf: parse and verdict prog attach may race with bpf map update
  bpf: sockmap update rollback on error can incorrectly dec prog refcnt
  net: test tailroom before appending to linear skb
  net: ip6_gre: Fix ip6erspan hlen calculation
  net: ip6_gre: Split up ip6gre_changelink()
  net: ip6_gre: Split up ip6gre_newlink()
  net: ip6_gre: Split up ip6gre_tnl_change()
  net: ip6_gre: Split up ip6gre_tnl_link_config()
  net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
  net: ip6_gre: Request headroom in __gre6_xmit()
  selftests/bpf: check return value of fopen in test_verifier.c
  erspan: fix invalid erspan version.
  ...

Pull parisc fixlets from Helge Deller:
 "Three small section mismatch fixes, one of them was found by 0-day
  test infrastructure"

* 'parisc-4.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Move ccio_cujo20_fixup() into init section
  parisc: Move setup_profiling_timer() out of init section
  parisc: Move find_pa_parent_type() out of init section

Pull btrfs fixes from David Sterba:
 "We've accumulated some fixes during the last week, some of them were
  in the works for a longer time but there are some newer ones too.

  Most of the fixes have a reproducer and fix user visible problems,
  also candidates for stable kernels. They IMHO qualify for a late rc,
  though I did not expect that many"

* tag 'for-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix crash when trying to resume balance without the resume flag
  btrfs: Fix delalloc inodes invalidation during transaction abort
  btrfs: Split btrfs_del_delalloc_inode into 2 functions
  btrfs: fix reading stale metadata blocks after degraded raid1 mounts
  btrfs: property: Set incompat flag if lzo/zstd compression is set
  Btrfs: fix duplicate extents after fsync of file with prealloc extents
  Btrfs: fix xattr loss after power failure
  Btrfs: send, fix invalid access to commit roots due to concurrent snapshotting

Pull ARM fixes from Russell King:

 - Łukasz Stelmach spotted a couple of issues with the decompressor.

 - a couple of kdump fixes found while testing kdump

 - replace some perl with shell code

 - resolve SIGFPE breakage

 - kprobes fixes

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: fix kill( ,SIGFPE) breakage
  ARM: 8772/1: kprobes: Prohibit kprobes on get_user functions
  ARM: 8771/1: kprobes: Prohibit kprobes on do_undefinstr
  ARM: 8770/1: kprobes: Prohibit probing on optimized_callback
  ARM: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed
  ARM: replace unnecessary perl with sed and the shell $(( )) operator
  ARM: kexec: record parent context registers for non-crash CPUs
  ARM: kexec: fix kdump register saving on panic()
  ARM: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel
  ARM: 8753/1: decompressor: add a missing parameter to the addruart macro

Pull x86 fixes from Thomas Gleixner:
 "An unfortunately larger set of fixes, but a large portion is
  selftests:

   - Fix the missing clusterid initializaiton for x2apic cluster
     management which caused boot failures due to IPIs being sent to the
     wrong cluster

   - Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat
     task

   - Wrap access to __supported_pte_mask in __startup_64() where clang
     compile fails due to a non PC relative access being generated.

   - Two fixes for 5 level paging fallout in the decompressor:

      - Handle GOT correctly for paging_prepare() and
        cleanup_trampoline()

      - Fix the page table handling in cleanup_trampoline() to avoid
        page table corruption.

   - Stop special casing protection key 0 as this is inconsistent with
     the manpage and also inconsistent with the allocation map handling.

   - Override the protection key wen moving away from PROT_EXEC to
     prevent inaccessible memory.

   - Fix and update the protection key selftests to address breakage and
     to cover the above issue

   - Add a MOV SS self test"

[ Part of the x86 fixes were in the earlier core pull due to dependencies ]

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/mm: Drop TS_COMPAT on 64-bit exec() syscall
  x86/apic/x2apic: Initialize cluster ID properly
  x86/boot/compressed/64: Fix moving page table out of trampoline memory
  x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
  x86/pkeys: Do not special case protection key 0
  x86/pkeys/selftests: Add a test for pkey 0
  x86/pkeys/selftests: Save off 'prot' for allocations
  x86/pkeys/selftests: Fix pointer math
  x86/pkeys: Override pkey when moving away from PROT_EXEC
  x86/pkeys/selftests: Fix pkey exhaustion test off-by-one
  x86/pkeys/selftests: Add PROT_EXEC test
  x86/pkeys/selftests: Factor out "instruction page"
  x86/pkeys/selftests: Allow faults on unknown keys
  x86/pkeys/selftests: Avoid printf-in-signal deadlocks
  x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal
  x86/pkeys/selftests: Stop using assert()
  x86/pkeys/selftests: Give better unexpected fault error messages
  x86/selftests: Add mov_to_ss test
  x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI
  x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI
  ...

Pull UP timer fix from Thomas Gleixner:
 "Work around the for_each_cpu() oddity on UP kernels in the tick
  broadcast code which causes boot failures because the CPU0 bit is
  always reported as set independent of the cpumask content"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Use for_each_cpu() specially on UP kernels

Pull scheduler fixlets from Thomas Gleixner:
 "Three trivial fixlets for the scheduler:

   - move print_rt_rq() and print_dl_rq() declarations to the right
     place

   - make grub_reclaim() static

   - fix the bogus documentation reference in Kconfig"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix documentation file path
  sched/deadline: Make the grub_reclaim() function static
  sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h

Pull RAS fix from Thomas Gleixner:
 "Fix a regression in the new AMD SMCA code which issues an SMP function
  call from the early interrupt disabled region of CPU hotplug. To avoid
  that, use cached block addresses which can be used directly"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE/AMD: Cache SMCA MISC block addresses

Pull perf tooling fixes from Thomas Gleixner:

 - fix segfault when processing unknown threads in cs-etm

 - fix "perf test inet_pton" on s390 failing due to missing inline

 - display all available events on 'perf annotate --stdio'

 - add missing newline when parsing an empty BPF program

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Add missing newline when parsing empty BPF proggie
  perf cs-etm: Remove redundant space
  perf cs-etm: Support unknown_thread in cs_etm_auxtrace
  perf annotate: Display all available events on --stdio
  perf test: "probe libc's inet_pton" fails on s390 due to missing inline

Pull locking fixes from Thomas Gleixner:
 "Two fixes to address shortcomings of the rwsem/percpu-rwsem lock
  debugging code which emits false positive warnings when the rwsem is
  anonymously locked and unlocked"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN
  locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag

Pull EFI fixes from Thomas Gleixner:

 - Use explicitely sized type for the romimage pointer in the 32bit EFI
   protocol struct so a 64bit kernel does not expand it to 64bit. Ditto
   for the 64bit struct to avoid the reverse issue on 32bit kernels.

 - Handle randomized tex offset correctly in the ARM64 EFI stub to avoid
   unaligned data resulting in stack corruption and other hard to
   diagnose wreckage.

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/arm64: Handle randomized TEXT_OFFSET
  efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode

Pull core fixes from Thomas Gleixner:

 - Unbreak the BPF compilation which got broken by the unconditional
   requirement of asm-goto, which is not supported by clang.

 - Prevent probing on exception masking instructions in uprobes and
   kprobes to avoid the issues of the delayed exceptions instead of
   having an ugly workaround.

 - Prevent a double free_page() in the error path of do_kexec_load()

 - A set of objtool updates addressing various issues mostly related to
   switch tables and the noreturn detection for recursive sibling calls

 - Header sync for tools.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Detect RIP-relative switch table references, part 2
  objtool: Detect RIP-relative switch table references
  objtool: Support GCC 8 switch tables
  objtool: Support GCC 8's cold subfunctions
  objtool: Fix "noreturn" detection for recursive sibling calls
  objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h
  x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation
  uprobes/x86: Prohibit probing on MOV SS instruction
  kprobes/x86: Prohibit probing on exception masking instructions
  x86/kexec: Avoid double free_page() upon do_kexec_load() failure

Currently ip6gre and ip6erspan share single metadata mode device,
using 'collect_md_tun'.  Thus, when doing:
  ip link add dev ip6gre11 type ip6gretap external
  ip link add dev ip6erspan12 type ip6erspan external
  RTNETLINK answers: File exists
simply fails due to the 2nd tries to create the same collect_md_tun.

The patch fixes it by adding a separate collect md tunnel device
for the ip6erspan, 'collect_md_tun_erspan'.  As a result, a couple
of places need to refactor/split up in order to distinguish ip6gre
and ip6erspan.

First, move the collect_md check at ip6gre_tunnel_{unlink,link} and
create separate function {ip6gre,ip6ersapn}_tunnel_{link_md,unlink_md}.
Then before link/unlink, make sure the link_md/unlink_md is called.
Finally, a separate ndo_uninit is created for ip6erspan.  Tested it
using the samples/bpf/test_tunnel_bpf.sh.

Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes. I've been queuing them up a bit too long so the
  list is longer than it otherwise would have been spread out across a
  few -rcs.

  In general, it's a scattering of fixes across several platforms,
  nothing truly serious enough to point out.

  There's a slightly larger batch of them for the Davinci platforms due
  to work to bring them back to life after some time, so there's a
  handful of regressions, some of them going back very far, others more
  recent.

  There's also a few patches fixing DT on Renesas platforms since they
  changed some bindings without remaining backwards compatible,
  splitting up describing LVDS as a proper bridge instead of having it
  as part of the display unit.

  We could push for them to be backwards compatible with old device
  trees, but it's likely to regress eventually if nobody's actually
  using said compatibility"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: davinci: board-dm646x-evm: set VPIF capture card name
  ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
  ARM: davinci: dm646x: fix timer interrupt generation
  ARM: keystone: fix platform_domain_notifier array overrun
  arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
  ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
  firmware: arm_scmi: Use after free in scmi_create_protocol_device()
  ARM: dts: cygnus: fix irq type for arm global timer
  Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
  tee: check shm references are consistent in offset/size
  tee: shm: fix use-after-free via temporarily dropped reference
  ARM: dts: imx7s: Pass the 'fsl,sec-era' property
  ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
  ARM: dts: correct missing "compatible" entry for ti81xx SoCs
  ARM: OMAP1: ams-delta: fix deferred_fiq handler
  arm64: tegra: Make BCM89610 PHY interrupt as active low
  ARM: davinci: fix GPIO lookup for I2C
  ARM: dts: logicpd-som-lv: Fix pinmux controller references
  ARM: dts: logicpd-som-lv: Fix Audio Mute
  ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
  ...

Merge tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes

arm64: tegra: Device tree fixes for v4.17

This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.

* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 7771c664 ("signal/arm: Document conflicts with SI_USER and
SIGFPE") broke the siginfo structure for userspace triggered signals,
causing the strace testsuite to regress.  Fix this by eliminating
the FPE_FIXME definition (which is at the root of the breakage) and
use FPE_FLTINV instead for the case where the hardware appears to be
reporting nonsense.

Fixes: 7771c664 ("signal/arm: Document conflicts with SI_USER and SIGFPE")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Pull dmaengine fix from Vinod Koul:

 - qcom bam runtime_pm fix

 - email update for Vinod

* tag 'dmaengine-fix-4.17-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: qcom: bam_dma: check if the runtime pm enabled
  dmaengine: Update email address for Vinod

Commit be83bbf8 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong.  In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.

It turns out that the "s_maxbytes" limit was less "known good" than I
thought.  In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore.  As a result, that file got limited to the
default MAX_INT s_maxbytes value.

This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.

Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage.  So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else.  It wasn't the regular file case I was worried
about.

I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.

Fixes: be83bbf8 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... into a global, two-dimensional array and service subsequent reads from
that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs
disabled).

In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage
of the bank->blocks pointer.

Fixes: 27bd5950 ("x86/mce/AMD: Get address from already initialized block")
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook

Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.

Fixes: 24ba613c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.

Fixes: 24ba613c ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Prohibit probing on optimized_callback() because
it is called from kprobes itself. If we put a kprobes
on it, that will cause a recursive call loop.
Mark it NOKPROBE_SYMBOL.

Fixes: 0dc016db ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Since get_kprobe_ctlblk() uses smp_processor_id() to access
per-cpu variable, it hits smp_processor_id sanity check as below.

[    7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[    7.007859] caller is debug_smp_processor_id+0x20/0x24
[    7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1
[    7.008890] Hardware name: Generic DT based system
[    7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24)
[    7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98)
[    7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c)
[    7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24)
[    7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4)
[    7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0)

To fix this issue, call get_kprobe_ctlblk() right after
irq-disabled since that disables preemption.

Fixes: 0dc016db ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

You can build a kernel in a cross compiling environment that doesn't
have perl in the $PATH. Commit 429f7a06 broke that for 32 bit
ARM. Fix it.

As reported by Stephen Rothwell, it appears that the symbols can be
either part of the BSS section or absolute symbols depending on the
binutils version.  When they're an absolute symbol, the $(( ))
operator errors out and the build fails.  Fix this as well.

Fixes: 429f7a06 ("ARM: decompressor: fix BSS size calculation")
Reported-by: Rob Landley <rob@landley.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

How we got to machine_crash_nonpanic_core() (iow, from an IPI, etc) is
not interesting for debugging a crash.  The more interesting context
is the parent context prior to the IPI being received.

Record the parent context register state rather than the register state
in machine_crash_nonpanic_core(), which is more relevant to the failing
condition.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

When a panic() occurs, the kexec code uses smp_send_stop() to stop
the other CPUs, but this results in the CPU register state not being
saved, and gdb is unable to inspect the state of other CPUs.

Commit 0ee59413 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path") addressed the issue on x86, but
ignored other architectures.  Address the issue on ARM by splitting
out the crash stop implementation to crash_smp_send_stop() and
adding the necessary protection.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The hypervisor setup before __enter_kernel destroys the value
sotred in r1. The value needs to be restored just before the jump.

Fixes: 6b52f7bd ("ARM: hyp-stub: Use r1 for the soft-restart address")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

In commit 639da5ee ("ARM: add an extra temp register to the low
level debugging addruart macro") an additional temporary register was
added to the addruart macro, but the decompressor code wasn't updated.

Fixes: 639da5ee ("ARM: add an extra temp register to the low level debugging addruart macro")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The x86 mmap() code selects the mmap base for an allocation depending on
the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and
for 32bit mm->mmap_compat_base.

exec() calls mmap() which in turn uses in_compat_syscall() to check whether
the mapping is for a 32bit or a 64bit task. The decision is made on the
following criteria:

  ia32    child->thread.status & TS_COMPAT
   x32    child->pt_regs.orig_ax & __X32_SYSCALL_BIT
  ia64    !ia32 && !x32

__set_personality_x32() was dropping TS_COMPAT flag, but
set_personality_64bit() has kept compat syscall flag making
in_compat_syscall() return true during the first exec() syscall.

Which in result has user-visible effects, mentioned by Alexey:
1) It breaks ASAN
$ gcc -fsanitize=address wrap.c -o wrap-asan
$ ./wrap32 ./wrap-asan true
==1217==Shadow memory range interleaves with an existing memory mapping. ASan cannot proceed correctly. ABORTING.
==1217==ASan shadow was supposed to be located in the [0x00007fff7000-0x10007fff7fff] range.
==1217==Process memory map follows:
        0x000000400000-0x000000401000   /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
        0x000000600000-0x000000601000   /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
        0x000000601000-0x000000602000   /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
        0x0000f7dbd000-0x0000f7de2000   /lib64/ld-2.27.so
        0x0000f7fe2000-0x0000f7fe3000   /lib64/ld-2.27.so
        0x0000f7fe3000-0x0000f7fe4000   /lib64/ld-2.27.so
        0x0000f7fe4000-0x0000f7fe5000
        0x7fed9abff000-0x7fed9af54000
        0x7fed9af54000-0x7fed9af6b000   /lib64/libgcc_s.so.1
[snip]

2) It doesn't seem to be great for security if an attacker always knows
that ld.so is going to be mapped into the first 4GB in this case
(the same thing happens for PIEs as well).

The testcase:
$ cat wrap.c

int main(int argc, char *argv[]) {
  execvp(argv[1], &argv[1]);
  return 127;
}

$ gcc wrap.c -o wrap
$ LD_SHOW_AUXV=1 ./wrap ./wrap true |& grep AT_BASE
AT_BASE:         0x7f63b8309000
AT_BASE:         0x7faec143c000
AT_BASE:         0x7fbdb25fa000

$ gcc -m32 wrap.c -o wrap32
$ LD_SHOW_AUXV=1 ./wrap32 ./wrap true |& grep AT_BASE
AT_BASE:         0xf7eff000
AT_BASE:         0xf7cee000
AT_BASE:         0x7f8b9774e000

Fixes: 1b028f78 ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Fixes: ada26481 ("x86/mm: Make in_compat_syscall() work during exec")
Reported-by: Alexey Izbyshev <izbyshev@ispras.ru>
Bisected-by: Alexander Monakov <amonakov@ispras.ru>
Investigated-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20180517233510.24996-1-dima@arista.com

With the following commit:

  fd35c88b ("objtool: Support GCC 8 switch tables")

I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.

That warning found yet another bug in the objtool switch table detection
logic.  For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.

Incidentally, this bug was already fixed for case 3 with:

  6f5ec299 ("objtool: Detect RIP-relative switch table references")

However, that commit missed the fix for cases 1 and 2.

The different cases are now starting to look more and more alike.  So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.

This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...

Switch table detection has been the most fragile area of objtool, by
far.  I long for the day when we'll have a GCC plugin for annotating
switch tables.  Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now.  At least the code is now
a little simpler than it was.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>