into intel.com:/home/lenb/src/26-latest-dev

into intel.com:/home/lenb/src/26-latest-dev

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Previous PCI9 patch had a #endif placed wrong for some unknown reason (was
correct in local tree) This fixes it.
Signed-off-by: Rune Torgersen <runet@innovsys.com>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We weren't binding new worker threads to their cpu when onlining.  Using
preempt and the debug version of smp_processor_id found this.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This gets rid of a bug found in some IRQ handling logic, after tripping
a debug assertion.  Basically, a recent patch called the wrong routine to
unlink a QH.  Net result, it wasn't allowing for the case that some other
QH was already being unlinked.  This patch uses the correct routine; the
names are confusingly similar, and the effect is often identical.

The consequence of using the wrong routine was that the driver could
lose one of the pending unlinks (probably wedging some activity) and
treat the other one as completed before it was safe to do so (which
probably wouldn't oops, but could cause other nasty corruption).

From: Brian Murphy <brian@murphy.dk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch is clearly needed for us to be in compliance with the USB spec.
It adds the mandated recovery-time delay following a port reset.
Regardless of anything else we do to alter the device initialization
sequence, this is necessary.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Turns out that a workaround for a different EHCI chip trips up at
least one NForce4 board.  Neither controller can multiply right.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Art Haas

The current GCC cvs code does not like the include/linux/fb.h file:

In file included from drivers/video/aty/atyfb_base.c:63:
include/linux/fb.h:865: error: array type has incomplete element type

This error is due to recent changes in GCC. A thread discussing this
change can be found by following the link below:

http://gcc.gnu.org/ml/gcc/2005-02/msg00053.html

The patch moves the array declaration after the definition of the
fb_modelist structure, and with this small change GCC is happy once
again.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Fix printing of running list, do not stop at first
  not-running device, instead scan them all.
- Do not free SKB before final access via show_results()
Signed-off-by: David S. Miller <davem@davemloft.net>

into intel.com:/home/lenb/src/26-latest-dev

Implemented ACPI 3.0 support for implicit conversion within
the Match() operator. match_obj can now be of type
integer, buffer, or string instead of just type integer.
Package elements are implicitly converted to the type
of the match_obj. This change aligns the behavior of
Match() with the behavior of the other logical operators
(LLess(), etc.)  It also requires an errata change to the
ACPI specification as this support was intended for ACPI
3.0, but was inadvertently omitted.

Fixed a problem with the internal implicit "to buffer"
conversion.  Strings that are converted to buffers will
cause buffer truncation if the string is smaller than the
target buffer. Integers that are converted to buffers will
not cause buffer truncation, only zero extension (both as
per the ACPI spec.) The problem was introduced when code
was added to truncate the buffer, but this should not be
performed in all cases, only the string case.

Fixed a problem with the Buffer and Package operators
where the interpreter would get confused if two such
operators were used as operands to an ASL operator (such
as LLess(Buffer(1){0},Buffer(1){1}).  The internal result
stack was not being popped after the execution of these
operators, resulting in an AE_NO_RETURN_VALUE exception.

Fixed a problem with constructs of the form
Store(Index(...),...). The reference object returned from
Index was inadvertently resolved to an actual value. This
problem was introduced in version 20050114 when the
behavior of Store() was modified to restrict the object
types that can be used as the source operand (to match
the ACPI specification.)

Reduced stack use in acpi_get_object_info().

into nuts.davemloft.net:/disk1/BK/sparc-2.6

Errors should not be ignored, so add __must_check
tag to this function as well.
Signed-off-by: David S. Miller <davem@davemloft.net>

It appears that access to the PLL registers of the radeon chip is
unreliable while the card is in "legacy VGA" text mode. I don't have a
good explanation yet, it might be the BIOS mucking around behind my
back. This fixes the lockup by moving the code that enables/disables the
dynamic power management to after the mode is set.

I'm still waiting for a proper explanation from ATI...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

CMSG reception needs to occur even if msg_name is not
set.
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a net_device argument to ifdown.  After all,
it's a bit silly to notify someone of an ifdown event without
telling them what which device it was for :)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

We checked the wrong byte, causing the touchpad
to lose sync if an absolute packet is received
after a relative packet with negative Y displacement.
Signed-off-by: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Noted while going through the n_tty code: that buffer check
used to check against the size of the temporary kernel buffer,
but since the tty layer was changed to use kernel buffers
though-out, the kernel buffer array became just a pointer, and
the check was limiting the opost blocksize to the size of a
pointer, which makes no sense.

Just remove it, since now the whole buffer is always in kernel
space.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The NTTY code can get confused by 4kB chunks, apparently
because n_tty_receive_room() will claim to have more room
than n_tty_receive_buf() can actually accept.

Until somebody figures out what the real n_tty_receive_room()
logic should be, let's just limit it to a safe 2kB.

Thanks go to Andreas Schwab for finding a test-case.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

On Sparc, if the user does not specify a mode option, we
should use the PROM probed values in default_var always.
Signed-off-by: David S. Miller <davem@davemloft.net>

cg3_blank() needs to clear the video enable register bit
to blank the screen, not set it.
Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Add some missing __iomem annotations for Integrator machines.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

This adds some missing annotations found by making the raw IO
operations check their pointer type.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>