- 24 Sep, 2016 40 commits
-
-
Jason Gunthorpe authored
commit d1e09f30 upstream. Fixes an oops that might happen if uverbs_close races with remove_one. Both contexts may run ib_uverbs_cleanup_ucontext, it depends on the flow. Currently, there is no protection for a case that remove_one didn't make the cleanup it runs to its end, the underlying ib_device was freed then uverbs_close will call ib_uverbs_cleanup_ucontext and OOPs. Above might happen if uverbs_close deleted the file from the list then remove_one didn't find it and runs to its end. Fixes to protect against that case by a new cleanup lock so that ib_uverbs_cleanup_ucontext will be called always before that remove_one is ended. Fixes: 35d4a0b6 ("IB/uverbs: Fix race between ib_uverbs_open and remove_one") Reported-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit c62fb260 upstream. The qp init function does a kzalloc() while holding the RCU lock that encounters the following warning with a debug kernel when a cat of the qp_stats is done: [ 231.723948] rcu_scheduler_active = 1, debug_locks = 0 [ 231.731939] 3 locks held by cat/11355: [ 231.736492] #0: (debugfs_srcu){......}, at: [<ffffffff813001a5>] debugfs_use_file_start+0x5/0x90 [ 231.746955] #1: (&p->lock){+.+.+.}, at: [<ffffffff81289a6c>] seq_read+0x4c/0x3c0 [ 231.755873] #2: (rcu_read_lock){......}, at: [<ffffffffa0a0c535>] _qp_stats_seq_start+0x5/0xd0 [hfi1] [ 231.766862] The init functions do an implicit next which requires the rcu read lock before the kzalloc(). Fix for both drivers is to change the scope of the init function to only do the allocation and the initialization of the just allocated iter. The implict next is moved back into the respective start functions to fix the issue. Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Mike Snitzer authored
commit 299f6230 upstream. v4.8-rc3 commit 99f3c90d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d ("dm flakey: error READ bios during the down_interval") Reported-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mateusz Guzik authored
commit 5efc2443 upstream. Prior to the change the function would blindly deference mm, exe_file and exe_file->f_inode, each of which could have been NULL or freed. Use get_task_exe_file to safely obtain stable exe_file. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Acked-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Mateusz Guzik authored
commit cd81a917 upstream. For more convenient access if one has a pointer to the task. As a minor nit take advantage of the fact that only task lock + rcu are needed to safely grab ->exe_file. This saves mm refcount dance. Use the helper in proc_exe_link. Signed-off-by:
-
Alexandre Bounine authored
commit b3006929 upstream. Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.comSigned-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christoph Hellwig authored
commit 9b4b3f6a upstream. irq already contains the interrupt number for the port, don't add the port index to it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: d684a90d ("ahci: per-port msix support") Signed-off-by:
-
David Rientjes authored
commit c11600e4 upstream. KASAN allocates memory from the page allocator as part of kmem_cache_free(), and that can reference current->mempolicy through any number of allocation functions. It needs to be NULL'd out before the final reference is dropped to prevent a use-after-free bug: BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140 ... Call Trace: dump_stack kasan_object_err kasan_report_error __asan_report_load2_noabort alloc_pages_current <-- use after free depot_save_stack save_stack kasan_slab_free kmem_cache_free __mpol_put <-- free do_exit This patch sets current->mempolicy to NULL before dropping the final reference. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com Fixes: cd11016e ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Michal Hocko authored
commit 6b4e3181 upstream. There have been several reports about pre-mature OOM killer invocation in 4.7 kernel when order-2 allocation request (for the kernel stack) invoked OOM killer even during basic workloads (light IO or even kernel compile on some filesystems). In all reported cases the memory is fragmented and there are no order-2+ pages available. There is usually a large amount of slab memory (usually dentries/inodes) and further debugging has shown that there are way too many unmovable blocks which are skipped during the compaction. Multiple reporters have confirmed that the current linux-next which includes [1] and [2] helped and OOMs are not reproducible anymore. A simpler fix for the late rc and stable is to simply ignore the compaction feedback and retry as long as there is a reclaim progress and we are not getting OOM for order-0 pages. We already do that for CONFING_COMPACTION=n so let's reuse the same code when compaction is enabled as well. [1] http://lkml.kernel.org/r/20160810091226.6709-1-vbabka@suse.cz [2] http://lkml.kernel.org/r/f7a9ea9d-bb88-bfd6-e340-3a933559305a@suse.cz Fixes: 0a0337e0 ("mm, oom: rework oom detection") Link: http://lkml.kernel.org/r/20160823074339.GB23577@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Tested-by:
Olaf Hering <olaf@aepfle.de> Tested-by:
Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Thiago Jung Bauermann authored
commit 070c43ee upstream. If kexec_apply_relocations fails, kexec_load_purgatory frees pi->sechdrs and pi->purgatory_buf. This is redundant, because in case of error kimage_file_prepare_segments calls kimage_file_post_load_cleanup, which will also free those buffers. This causes two warnings like the following, one for pi->sechdrs and the other for pi->purgatory_buf: kexec-bzImage64: Loading purgatory failed ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2119 at mm/vmalloc.c:1490 __vunmap+0xc1/0xd0 Trying to vfree() nonexistent vm area (ffffc90000e91000) Modules linked in: CPU: 1 PID: 2119 Comm: kexec Not tainted 4.8.0-rc3+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x4d/0x65 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 ? find_vmap_area+0x19/0x70 ? kimage_file_post_load_cleanup+0x47/0xb0 __vunmap+0xc1/0xd0 vfree+0x2e/0x70 kimage_file_post_load_cleanup+0x5e/0xb0 SyS_kexec_file_load+0x448/0x680 ? putname+0x54/0x60 ? do_sys_open+0x190/0x1f0 entry_SYSCALL_64_fastpath+0x13/0x8f ---[ end trace 158bb74f5950ca2b ]--- Fix by setting pi->sechdrs an pi->purgatory_buf to NULL, since vfree won't try to free a NULL pointer. Link: http://lkml.kernel.org/r/1472083546-23683-1-git-send-email-bauerman@linux.vnet.ibm.comSigned-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit b519d408 upstream. Ensure that we conform to the algorithm described in RFC5661, section 18.36.4 for when to bump the sequence id. In essence we do it for all cases except when the RPC call timed out, or in case of the server returning NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit bf0291dd upstream. According to RFC5661, the client is responsible for serialising LAYOUTGET and LAYOUTRETURN to avoid ambiguity. Consider the case where we send both in parallel. Client Server ====== ====== LAYOUTGET(seqid=X) LAYOUTRETURN(seqid=X) LAYOUTGET return seqid=X+1 LAYOUTRETURN return seqid=X+2 Process LAYOUTRETURN Forget layout stateid Process LAYOUTGET Set seqid=X+1 The client processes the layoutget/layoutreturn in the wrong order, and since the result of the layoutreturn was to clear the only existing layout segment, the client forgets the layout stateid. When the LAYOUTGET comes in, it is treated as having a completely new stateid, and so the client sets the wrong sequence id... Fix is to check if there are outstanding LAYOUTGET requests before we send the LAYOUTRETURN (note that LAYOUGET will already wait if it sees an outstanding LAYOUTRETURN). Signed-off-by:
-
Chuck Lever authored
commit 88584818 upstream. nfsd4_release_lockowner finds a lock owner that has no lock state, and drops cl_lock. Then release_lockowner picks up cl_lock and unhashes the lock owner. During the window where cl_lock is dropped, I don't see anything preventing a concurrent nfsd4_lock from finding that same lock owner and adding lock state to it. Move release_lockowner() into nfsd4_release_lockowner and hang onto the cl_lock until after the lock owner's state cannot be found again. Found by inspection, we don't currently have a reproducer. Fixes: 2c41beb0 ("nfsd: reduce cl_lock thrashing in ... ") Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 98b0f80c upstream. On error, the callers expect us to return without bumping nn->cb_users[]. Signed-off-by:
-
Trond Myklebust authored
commit e09c978a upstream. The slot table hasn't been an array since v3.7. Ensure that we use nfs4_lookup_slot() to access the slot correctly. Fixes: 87dda67e ("NFSv4.1: Allow SEQUENCE to resize the slot table...") Signed-off-by:
-
Trond Myklebust authored
commit b88fa69e upstream. Ensure that the client conforms to the normative behaviour described in RFC5661 Section 12.7.2: "If a client believes its lease has expired, it MUST NOT send I/O to the storage device until it has validated its lease." So ensure that we wait for the lease to be validated before using the layout. Signed-off-by:
-
Trond Myklebust authored
commit 3dc14735 upstream. If the attempt to connect to a DS fails inside ff_layout_pg_init_read or ff_layout_pg_init_write, then we currently end up clearing the layout segment carried by the struct nfs_pageio_descriptor, causing an Oops when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist. The fix is to ensure we return the layout and then retry. Fixes: 446ca219 ("pNFS/flexfiles: When initing reads or writes, we...") Signed-off-by:
-
Tejun Heo authored
commit df6a58c5 upstream. kernfs_notify_workfn() sends out file modified events for the scheduled kernfs_nodes. Because the modifications aren't from userland, it doesn't have the matching file struct at hand and can't use fsnotify_modify(). Instead, it looked up the inode and then used d_find_any_alias() to find the dentry and used fsnotify_parent() and fsnotify() directly to generate notifications. The assumption was that the relevant dentries would have been pinned if there are listeners, which isn't true as inotify doesn't pin dentries at all and watching the parent doesn't pin the child dentries even for dnotify. This led to, for example, inotify watchers not getting notifications if the system is under memory pressure and the matching dentries got reclaimed. It can also be triggered through /proc/sys/vm/drop_caches or a remount attempt which involves shrinking dcache. fsnotify_parent() only uses the dentry to access the parent inode, which kernfs can do easily. Update kernfs_notify_workfn() so that it uses fsnotify() directly for both the parent and target inodes without going through d_find_any_alias(). While at it, supply the target file name to fsnotify() from kernfs_node->name. Signed-off-by:
Evgeny Vereshchagin <evvers@ya.ru> Fixes: d911d987 ("kernfs: make kernfs_notify() trigger inotify events too") Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
-
Gavin Shan authored
commit caa58f80 upstream. In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e916772 ("powerpc/powernv: Use PE instead of number during setup and release" Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
commit f077aaf0 upstream. In commit c60ac569 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac569 ("powerpc: Update kernel VSID range") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
commit 41017a75 upstream. of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() [ 0.275940] Unable to handle kernel paging request for data at address 0x00000130 [ 0.283120] Faulting instruction address: 0xc01b44cc [ 0.288175] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.293343] PREEMPT CMPC885 [ 0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68 [ 0.304131] task: c6074000 ti: c6080000 task.ti: c6080000 [ 0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708 [ 0.314372] REGS: c6081d90 TRAP: 0300 Not tainted (4.7.0-g65124df-dirty) [ 0.322267] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 24000028 XER: 20000000 [ 0.328813] DAR: 00000130 DSISR: c0000000 GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000 GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083 GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000 [ 0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc [ 0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44 [ 0.370972] Call Trace: [ 0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc [ 0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118 [ 0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c [ 0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc [ 0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110 [ 0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64 [ 0.408233] Instruction dump: [ 0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004 [ 0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0 [ 0.426763] ---[ end trace fe4113ee21d72ffa ]--- fixes: e65078f1 ("powerpc: sysdev: cpm1: use gpiochip data pointer") fixes: a14a2d48 ("powerpc: cpm_common: use gpiochip data pointer") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Mukesh Ojha authored
commit a9cbf0b2 upstream. In a situation, where Linux kernel gets notified about duplicate error log from OPAL, it is been observed that kernel fails to remove sysfs entries (/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because, we currently search the error log/dump kobject in the kset list via 'kset_find_obj()' routine. Which eventually increment the reference count by one, once it founds the kobject. So, unless we decrement the reference count by one after it found the kobject, we would not be able to release the kobject properly later. This patch adds the 'kobject_put()' which was missing earlier. Signed-off-by:
Mukesh Ojha <mukesh02@linux.vnet.ibm.com> Reviewed-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
commit cc7786d3 upstream. tabort_syscall runs with RI=1, so a nested recoverable machine check will load the paca into r13 and overwrite what we loaded it with, because exceptions returning to privileged mode do not restore r13. Fixes: b4b56f9e (powerpc/tm: Abort syscalls in active transactions) Signed-off-by:
Nick Piggin <npiggin@gmail.com> Signed-off-by:
-
Artem Germanov authored
[ Upstream commit db7196a0 ] Commit 76174004 (tcp: do not slow start when cwnd equals ssthresh ) introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth ~100KB/s. That is caused by stalled cwnd when cwnd equals ssthresh. This patch fixes it by proper increasing cwnd in this case. Signed-off-by:
Artem Germanov <agermanov@anchorfree.com> Acked-by:
Dmitry Adamushko <d.adamushko@anchorfree.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit cd17d230 ] Currently vlan tagged packets were not parsed correctly and assumed to be regular IPv4/IPv6 packets. We should check for 802.1Q/802.1ad tags and update the lro header accordingly. This fixes the use case where LRO is on and rxvlan is off (vlan stripping is off). Fixes: e586b3b0 ('net/mlx5: Ethernet Datapath files') Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 76061f63 ] When DATA and/or FIN are carried in a SYN/ACK message or SYN message, we append an skb in socket receive queue, but we forget to call sk_forced_mem_schedule(). Effect is that the socket has a negative sk->sk_forward_alloc as long as the message is not read by the application. Josh Hunt fixed a similar issue in commit d22e1537 ("tcp: fix tcp fin memory accounting") Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Josh Hunt <johunt@akamai.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 751eb6b6 ] In general, when DAD detected IPv6 duplicate address, ifp->state will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a delayed work, the call tree should be like this: ndisc_recv_ns -> addrconf_dad_failure <- missing ifp put -> addrconf_mod_dad_work -> schedule addrconf_dad_work() -> addrconf_dad_stop() <- missing ifp hold before call it addrconf_dad_failure() called with ifp refcont holding but not put. addrconf_dad_work() call addrconf_dad_stop() without extra holding refcount. This will not cause any issue normally. But the race between addrconf_dad_failure() and addrconf_dad_work() may cause ifp refcount leak and netdevice can not be unregister, dmesg show the following messages: IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected! ... unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Cc: stable@vger.kernel.org Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 9d13744b ] There is a code path where we are calling __iowrite64_copy() on an address that is not 64-bit aligned. This causes an exception on some architectures such as arm64. Fix that code path by using __iowrite32_copy(). Reported-by:
JD Zheng <jiandong.zheng@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit 03c2778a ] Neither the failure or success paths of ping_v6_sendmsg release the dst it acquires. This leads to a flood of warnings from "net/core/dst.c:288 dst_release" on older kernels that don't have 8bf4ada2 backported. That patch optimistically hoped this had been fixed post 3.10, but it seems at least one case wasn't, where I've seen this triggered a lot from machines doing unprivileged icmp sockets. Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 6e1ce3c3 ] Right now we use the 'readlock' both for protecting some of the af_unix IO path and for making the bind be single-threaded. The two are independent, but using the same lock makes for a nasty deadlock due to ordering with regards to filesystem locking. The bind locking would want to nest outside the VSF pathname locking, but the IO locking wants to nest inside some of those same locks. We tried to fix this earlier with commit c845acb3 ("af_unix: Fix splice-bind deadlock") which moved the readlock inside the vfs locks, but that caused problems with overlayfs that will then call back into filesystem routines that take the lock in the wrong order anyway. Splitting the locks means that we can go back to having the bind lock be the outermost lock, and we don't have any deadlocks with lock ordering. Acked-by:
Rainer Weikusat <rweikusat@cyberadapt.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit 38f7bd94 ] This reverts commit c845acb3. It turns out that it just replaces one deadlock with another one: we can still get the wrong lock ordering with the readlock due to overlayfs calling back into the filesystem layer and still taking the vfs locks after the readlock. The proper solution ends up being to just split the readlock into two pieces: the bind lock (taken *outside* the vfs locks) and the IO lock (taken *inside* the filesystem locks). The two locks are independent anyway. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit 24b27fc4 ] Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves <crash> Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
-
WANG Cong authored
[ Upstream commit c0338aff ] Dmitry reported a double free on kcm socket, which could be easily reproduced by: #include <unistd.h> #include <sys/syscall.h> int main() { int fd = syscall(SYS_socket, 0x29ul, 0x5ul, 0x0ul, 0, 0, 0); syscall(SYS_ioctl, fd, 0x89e2ul, 0x20a98000ul, 0, 0, 0); return 0; } This is because on the error path, after we install the new socket file, we call sock_release() to clean up the socket, which leaves the fd pointing to a freed socket. Fix this by calling sys_close() on that fd directly. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 9264251e ] commit bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 2fb04fdf ] Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Xander Huff authored
[ Upstream commit c3e70edd ] This reverts: commit 33c133cc ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by:
Xander Huff <xander.huff@ni.com> Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 4f101c47 ] We kept shadow copies of which interrupt sources we have enabled and disabled, but due to an order bug in how intrl2_mask_clear was defined, we could run into the following scenario: CPU0 CPU1 intrl2_1_mask_clear(..) sets INTRL2_CPU_MASK_CLEAR bcm_sf2_switch_1_isr read INTRL2_CPU_STATUS and masks with stale irq1_mask value updates irq1_mask value Which would make us loop again and again trying to process and interrupt we are not clearing since our copy of whether it was enabled before still indicates it was not. Fix this by updating the shadow copy first, and then unasking at the HW level. Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 7b996243 ] Instead of using sock_tx_timestamp, use skb_tx_timestamp to record software transmit timestamp of a packet. sock_tx_timestamp resets and overrides the tx_flags of the skb. The function is intended to be called from within the protocol layer when creating the skb, not from a device driver. This is inconsistent with other drivers and will cause issues for TCP. In TCP, we intend to sample the timestamps for the last byte for each sendmsg/sendpage. For that reason, tcp_sendmsg calls tcp_tx_timestamp only with the last skb that it generates. For example, if a 128KB message is split into two 64KB packets we want to sample the SND timestamp of the last packet. The current code in the tun driver, however, will result in sampling the SND timestamp for both packets. Also, when the last packet is split into smaller packets for retranmission (see tcp_fragment), the tun driver will record timestamps for all of the retransmitted packets and not only the last packet. Fixes: eda29772 (tun: Support software transmit time stamping.) Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Francis Yan <francisyyan@google.com> Acked-by:
-
Lance Richardson authored
[ Upstream commit 232cb53a ] The function sctp_diag_dump_one() currently performs a memcpy() of 64 bytes from a 16 byte field into another 16 byte field. Fix by using correct size, use sizeof to obtain correct size instead of using a hard-coded constant. Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 20a2b49f ] When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
