Merge tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Third Round of Renesas ARM Based SoC Boards Updates for v3.15" from
Simon Horman:

* r7s72100 SoC (RZ/A1H) based Genmai board
  - Set proper DMA masks for Ether device

* r8a7791 (R-Car M2) based Koelsch board
  - Remove Koelsch DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add DU device to koelsch-reference
  - Refactor clock lookup hack in koelsch-reference
  - Add SDHI devices

* r8a7790 (R-Car H2) based Lager board
  - Remove Lager DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add internal USB PCI support
  - Add QSPI pinmux
  - Sdd SDHI0/2 support

* emev2 (Emma Mobile EV2) based kzm9d board
  - Remove KZM9D board code

* r8a7778 (R-Car M1) based bock-w board
  - Set proper DMA masks for Ether device

* r8a7740 (R-Mobile A1) based Armadillo 800 EVA board
  - Set proper DMA masks for Ether device

* tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove Lager DT reference legacy clock bits
  ARM: shmobile: Remove Koelsch DT reference legacy clock bits
  ARM: shmobile: Remove KZM9D board code
  ARM: shmobile: Genmai: set proper DMA masks for Ether device
  ARM: shmobile: Koelsch: set proper DMA masks for Ether device
  ARM: shmobile: Lager: set proper DMA masks for Ether device
  ARM: shmobile: BOCK-W: set proper DMA masks for Ether device
  ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device
  ARM: shmobile: koelsch-reference: Add DU device
  ARM: shmobile: koelsch-reference: Refactor clock lookup hack
  ARM: shmobile: lager-reference: Add DU device
  ARM: shmobile: lager-reference: Refactor clock lookup hack
  ARM: shmobile: lager: Add internal USB PCI support
  ARM: shmobile: lager legacy: Add QSPI pinmux
  ARM: shmobile: lager: add SDHI0/2 support
  ARM: shmobile: Add SDHI devices for legacy Koelsch
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/boards

Keystone SOC updates for 3.15

- Enable Watchdog and GPIO config
- Enable LED driver config
- Enable NAND and EMIF driver config

* tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: config: keystone: enable AEMIF/NAND support
  ARM: config: keystone: enable led support
  ARM: config: keystone: enable gpio support
  ARM: config: keystone: enable watchdog support

* tag 'pxa' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
  ARM: pxa: add gpio keys information
Signed-off-by: Olof Johansson <olof@lixom.net>

Switching from corgikbd to matrixkbd corgi has lost support for few switches.
Readd them through gpio-keys-polled device (-polled, since scoop does
not provide IRQ for GPIO).
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Keystone SoC uses the same NAND driver as Davinci, so enable
Davinci NAND and AEIMF that provides interface for it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and
serial console as part of the standard multi_v7_defconfig.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[khilman: removed non-qcom changes]
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge "mvebu defconfig changes for v3.15" from Jason Cooper:

 - dove
    - remove UBI support
    - enable watchdog

 - mvebu
    - rename mvebu_defconfig mvebu_v7_defconfig
    - enable audio
    - enable watchdog
    - add Armada 375 and 38x

* tag 'mvebu-defconfig-3.15' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: update defconfigs for Armada 375 and 38x
  ARM: dove: Enable watchdog support in the defconfig
  ARM: mvebu: Enable watchdog support in defconfig
  ARM: mvebu: enable audio options in mvebu_defconfig
  ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig
  ARM: dove: Remove UBI support from defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.15" from
Simon Horman:

* r7s72100 SoC (RZ/A1H) based Genmai board
  - Enable RSPI

* r8a7790 (R-Car H2) based Koelsch board
  - Enable I2C, RSPI and MTD_M25P80

* r8a7779 (R-Car H1) based Lager board
  - Enable sound

* tag 'renesas-defconfig2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai defconfig: Enable RSPI
  ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80
  ARM: shmobile: lager: add sound support on defconfig
  ARM: shmobile: koelsch: Enable I2C in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Second Round of Renesas ARM Based SoC Board Updates for v3.15" from
Simon Horman:

* r7s72100 (RZ/A1H) based Genmai board
  - Enable SH ethernet
  - Add RSPI support

* r8a7791 (R-Car M2) based Koelsch board
  - Add QSPI support
  - Add I2C support
  - Pass SH ethernet PHY IRQ

* r8a7790 (R-Car H2) based Lager board
  - Switch QSPI to named IRQs
  - Add sound support
  - Add USB0 cable detection workaround
  - Pass SH ethernet PHY IRQ

* r8a7779 (R-Car H1) based Marzen board
  - Revert conditional selection of SMSC_PHY

* r8a7778 (R-Car M1) based Bock-W board
  - Use wp-gpios instead of WP pin

* tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai: Enable r7s72100-ether
  ARM: shmobile: lager legacy: Switch QSPI to named IRQs
  ARM: shmobile: koelsch legacy: Add QSPI support
  ARM: shmobile: genmai legacy: Add RSPI support
  Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"
  ARM: shmobile: lager: add sound support
  ARM: shmobile: Lager USB0 cable detection workaround
  ARM: shmobile: bockw: use wp-gpios instead of WP pin
  ARM: shmobile: koelsch: Add I2C support
  ARM: shmobile: Koelsch: pass Ether PHY IRQ
  ARM: shmobile: Lager: pass Ether PHY IRQ

Merge tag 'renesas-defconfig-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Renesas ARM based SoC Defconfig Updates for v3.15" from Simon Horman:

* Renesas ARM based SoC boards (Global)
  enable CONFIG_DEVTMPFS in defconfig

* r8a7791 SoC (R-Car M2) based Koelsch board
  - Enable SATA

* r8a7790 SoC (R-Car H2) based Lager board
  - Enable SATA, VIN and ADV7180 decoder in defconfig

* tag 'renesas-defconfig-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: lager: Enable SATA in defconfig
  ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfig
  ARM: shmobile: koelsch: Enable SATA in defconfig
  ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-boards-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Renesas ARM based SoC Board Updates for v3.15" from Simon Horman:

* r8a7791 (R-Car M2) based Koelsch board
  - Fix error return code check from clk_get()
  - Add SATA0 support
  - Conditionally select MICREL_PHY for Multiplatform

* r8a7790 (R-Car H2) based Lager board
  - Add USBHS support
  - Fix error return code check from clk_get()
  - Add SATA support
  - Make spi_flash_data const
  - Add VIN1 SoC camera support
  - Conditionally select CONFIG_MICREL_PHY

* r8a7778 (R-Car M1) based Bock-W board
  - Add USB Func DMAEngine support
  - Use HPBIF DMAEngine for sound
  - Use SSI DMAEngine for sound

* emev2 (Emma Mobile EV2) based kzm9d board
  - Use common clock framework

* r8a773a0 (SH-Mobile AG5) based kzm9g board
  - Add zboot support

* Many boards
  - Conditionally select SMSC_PHY

* tag 'renesas-boards-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits)
  ARM: shmobile: Remove Lager USBHS UDC ifdefs
  ARM: shmobile: lager: Add USBHS support
  ARM: shmobile: koelsch: fix error return code check from clk_get()
  ARM: shmobile: lager: fix error return code check from clk_get()
  ARM: shmobile: marzen: Conditionally select SMSC_PHY
  ARM: shmobile: mackerel: Conditionally select SMSC_PHY
  ARM: shmobile: kzm9d: Conditionally select SMSC_PHY
  ARM: shmobile: bockw: Sort Kconfig node's selections
  ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHY
  ARM: shmobile: ape6evm: Conditionally select SMSC_PHY
  ARM: shmobile: koelsch: Add SATA0 support
  ARM: shmobile: lager: Add SATA support
  ARM: shmobile: lager: Make spi_flash_data const
  ARM: shmobile: kzm9d: Use common clock framework
  ARM: shmobile: lager: Add VIN1 SoC camera support
  ARM: mach-shmobile: kzm9g: add zboot support
  ARM: shmobile: koelsch: Conditionally select MICREL_PHY for Multiplatform
  ARM: shmobile: bockw: add USB Func DMAEngine support
  ARM: shmobile: bockw: use HPBIF DMAEngine for sound
  ARM: shmobile: bockw: use SSI DMAEngine for sound
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Lager DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Koelsch DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Get rid of KZM9D board code written in C. This version of the
C board code was used in the case of multiplatform, but these
days DT can be used instead, so because of that simply get rid
of the C code to simplify and save space.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This commit enables the Armada 375 and Armada 38x support in
mvebu_defconfig and multi_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that we have watchdog support, let's add it to the defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that we have proper support for Armada 370/XP watchdog
let's enable it in mvebu_defconfig and multi_v7_defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Keystone GPIO functionality is ready for use, so LED support can be
enabled in config.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Enable enable GPIO support for Keystone by setting CONFIG_GPIOLIB and
CONFIG_GPIO_DAVINCI options in keystone_defconfig.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Keystone SoC uses the same watchdog driver as Davinci, so
enable WDT and core used by it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The DU device has no DT bindings yet, instantiate it as a platform
device for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Make the clock lookup hack more generic to ease the addition of more
devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The DU device has no DT bindings yet, instantiate it as a platform
device for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Make the clock lookup hack more generic to ease the addition of more
devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This adds internal PCI USB host devices to R-Car H2 Lager board.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[damm@opensource.se: Rebased and reworked to only include USB1 and USB2]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Since at least the Armada 370 SoC has audio support, it makes sense to
enable the corresponding kernel configuration options in
mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Pull btrfs fixes from Chris Mason:
 "We have a small collection of fixes in my for-linus branch.

  The big thing that stands out is a revert of a new ioctl.  Users
  haven't shipped yet in btrfs-progs, and Dave Sterba found a better way
  to export the information"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: use right clone root offset for compressed extents
  btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105
  Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol
  Btrfs: fix max_inline mount option
  Btrfs: fix a lockdep warning when cleaning up aborted transaction
  Revert "btrfs: add ioctl to export size of global metadata reservation"

Pull devicetree fixes from Rob Herring:
 "Fix booting on PPC boards.  Changes to of_match_node matching caused
  the serial port on some PPC boards to stop working.  Reverted the
  change and reimplement to split matching between new style compatible
  only matching and fallback to old matching algorithm"

* tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: search the best compatible match first in __of_match_node()
  Revert "OF: base: match each node compatible against all given matches first"

Currently, of_match_node compares each given match against all node's
compatible strings with of_device_is_compatible.

To achieve multiple compatible strings per node with ordering from
specific to generic, this requires given matches to be ordered from
specific to generic. For most of the drivers this is not true and also
an alphabetical ordering is more sane there.

Therefore, this patch introduces a function to match each of the node's
compatible strings against all given compatible matches without type and
name first, before checking the next compatible string. This implies
that node's compatibles are ordered from specific to generic while
given matches can be in any order. If we fail to find such a match
entry, then fall-back to the old method in order to keep compatibility.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull SCSI target fixes from Nicholas Bellinger:
 "Mostly minor fixes this time to v3.14-rc1 related changes.  Also
  included is one fix for a free after use regression in persistent
  reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  Target/sbc: Fix protection copy routine
  IB/srpt: replace strict_strtoul() with kstrtoul()
  target: Simplify command completion by removing CMD_T_FAILED flag
  iser-target: Fix leak on failure in isert_conn_create_fastreg_pool
  iscsi-target: Fix SNACK Type 1 + BegRun=0 handling
  target: Fix missing length check in spc_emulate_evpd_83()
  qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list
  target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div
  target: Fix free-after-use regression in PR unregister

Pull i2c fixes from Wolfram Sang:
 "i2c has a bugfix and documentation improvements for you"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Documentation: i2c: mention ACPI method for instantiating devices
  Documentation: i2c: describe devicetree method for instantiating devices
  i2c: mv64xxx: refactor message start to ensure proper initialization

Merge branches 'irq-urgent-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq update from Thomas Gleixner:
 "Fix from the urgent branch: a trivial oneliner adding the missing
  Kconfig dependency curing build failures which have been discovered by
  several build robots.

  The update in the irq-core branch provides a new function in the
  irq/devres code, which is a prerequisite for driver developers to get
  rid of boilerplate code all over the place.

  Not a bugfix, but it has zero impact on the current kernel due to the
  lack of users.  It's simpler to provide the infrastructure to
  interested parties via your tree than fulfilling the wishlist of
  driver maintainers on which particular commit or tag this should be
  based on"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Add devm_request_any_context_irq()

Pull timer fixes from Thomas Gleixner:
 "The following trilogy of patches brings you:

   - fix for a long standing math overflow issue with HZ < 60

   - an onliner fix for a corner case in the dreaded tick broadcast
     mechanism affecting a certain range of AMD machines which are
     infested with the infamous automagic C1E power control misfeature

   - a fix for one of the ARM platforms which allows the kernel to
     proceed and boot instead of stupidly panicing for no good reason.
     The patch is slightly larger than necessary, but it's less ugly
     than the alternative 5 liner"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Clear broadcast pending bit when switching to oneshot
  clocksource: Kona: Print warning rather than panic
  time: Fix overflow when HZ is smaller than 60

Merge tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull twi tracing fixes from Steven Rostedt:
 "Two urgent fixes in the tracing utility.

  The first is a fix for the way the ring buffer stores timestamps.
  After a restructure of the code was done, the ring buffer timestamp
  logic missed the fact that the first event on a sub buffer is to have
  a zero delta, as the full timestamp is stored on the sub buffer
  itself.  But because the delta was not cleared to zero, the timestamp
  for that event will be calculated as the real timestamp + the delta
  from the last timestamp.  This can skew the timestamps of the events
  and have them say they happened when they didn't really happen.
  That's bad.

  The second fix is for modifying the function graph caller site.  When
  the stop machine was removed from updating the function tracing code,
  it missed updating the function graph call site location.  It is still
  modified as if it is being done via stop machine.  But it's not.  This
  can lead to a GPF and kernel crash if the function graph call site
  happens to lie between cache lines and one CPU is executing it while
  another CPU is doing the update.  It would be a very hard condition to
  hit, but the result is severe enough to have it fixed ASAP"

* tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/x86: Use breakpoints for converting function graph caller
  ring-buffer: Fix first commit on sub-buffer having non-zero delta