Creating a Debian package without CONFIG_DEBUG_INFO produces
a warning that no debug package was created.

This patch excludes the debug package from the control file,
if no debug package is created by this configuration.
Signed-off-by: Reinhard Karcher <reinhard.karcher@gmx.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The target outputmakefile is used to generate a Makefile
for out-of-tree builds and does not depend on the kernel
configuration.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As commit 5ef87263 ("kbuild: get rid of misleading $(AS) from
documents") noted, we rarely use $(AS) directly in the kernel build.

Now that the only/last user of $(AS) in drivers/net/wan/Makefile was
converted to $(CC), $(AS) is no longer used in the build process.

You can still pass in AS=clang, which is just a switch to turn on
the LLVM integrated assembler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>

Split the big recipe into 3 stages: compile, link, and hexdump.

After this commit, the build log with CONFIG_WANXL_BUILD_FIRMWARE
will look like this:

  M68KAS  drivers/net/wan/wanxlfw.o
  M68KLD  drivers/net/wan/wanxlfw.bin
  BLDFW   drivers/net/wan/wanxlfw.inc
  CC [M]  drivers/net/wan/wanxl.o
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The firmware source, wanxlfw.S, is currently compiled by the combo of
$(CPP) and $(M68KAS). This is not what we usually do for compiling *.S
files. In fact, this Makefile is the only user of $(AS) in the kernel
build.

Instead of combining $(CPP) and (AS) from different tool sets, using
$(M68KCC) as an assembler driver is simpler, and saner.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.

wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.

I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.

Instead, the kernel.org m68k GCC [1] successfully built it.

Allowing a user to pass in CROSS_COMPILE_M68K= is handier.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xzSuggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

GNU Make commit 8c888d95f618 ("[SV 8297] Implement "grouped targets"
for explicit rules.") added the '&:' syntax.

I think '&:' is a perfect fit here, but we cannot use it any time
soon. Just add a TODO comment.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Add -Wall to catch more warnings for C++ host programs.

When I submitted the previous version, the 0-day bot reported
-Wc++11-compat warnings for old GCC:

  HOSTCXX -fPIC scripts/gcc-plugins/latent_entropy_plugin.o
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:28:0,
                 from scripts/gcc-plugins/gcc-common.h:15,
                 from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:102:21: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
    fprintf ((FILE), "%s"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
                     ^
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/config/elfos.h:170:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
       fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n",  \
                        ^
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/tm.h:42:0,
                 from scripts/gcc-plugins/gcc-common.h:15,
                 from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/lib/gcc/x86_64-linux-gnu/4.8/plugin/include/defaults.h:126:24: warning: C++11 requires a space between string literal and macro [-Wc++11-compat]
       fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n",  \
                        ^

The source of the warnings is in the plugin headers, so we have no
control of it. I just suppressed them by adding -Wno-c++11-compat to
scripts/gcc-plugins/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>

If this file were compiled with -Wall, the following warning would be
reported:

scripts/kconfig/qconf.cc:312:6: warning: unused variable ‘i’ [-Wunused-variable]
  int i;
      ^

The commit prepares to turn on -Wall for C++ host programs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>

Prior to commit 70a6fcf3 ("[sparc] unify 32bit and 64bit string.h"),
__HAVE_ARCH_STRLEN was defined in both of string_32.h and string_64.h

It did not unify __HAVE_ARCH_STRLEN, but deleted it from string_32.h

This issue was reported by the kbuild test robot in the trial of
forcible linking of $(lib-y) to vmlinux.

Fixes: 70a6fcf3 ("[sparc] unify 32bit and 64bit string.h")
Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: David S. Miller <davem@davemloft.net>

Refactor Makefile.dtbinst so it looks similar to other Makefiles.

*.dtb should not be a phony target. Copy files based on the timestamps.
Print installed dtb paths instead of in-kernel dtb paths.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The 'dtbinst_root' is used to remember the root of the in-kernel dts
directory (i.e. arch/*/boot/dts), but it looks clumsy.

I prefer using two variables 'obj' and 'dst' to track the in-kernel
directory and the install destination, respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.

The flag change happened at https://gcc.gnu.org/PR92046.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The 'imply' statement may create unmet direct dependency when the
implied symbol depends on m.

[Test Code]

  config FOO
          tristate "foo"
          imply BAZ

  config BAZ
          tristate "baz"
          depends on BAR

  config BAR
          def_tristate m

  config MODULES
          def_bool y
          option modules

If you set FOO=y, BAZ is also promoted to y, which results in the
following .config file:

  CONFIG_FOO=y
  CONFIG_BAZ=y
  CONFIG_BAR=m
  CONFIG_MODULES=y

This does not meet the dependency 'BAZ depends on BAR'.

Unlike 'select', what is worse, Kconfig never shows the
'WARNING: unmet direct dependencies detected for ...' for this case.

Because 'imply' is considered to be weaker than 'depends on', Kconfig
should take the direct dependency into account.

For clarification, describe this case in kconfig-language.rst too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

The 'imply' keyword restricts a symbol to y or n, excluding m
when it is implied by y. This is the original behavior since
commit 237e3ad0 ("Kconfig: Introduce the "imply" keyword").

However, the author of this feature, Nicolas Pitre, stated that
the 'imply' keyword should not impose any restrictions.
(https://lkml.org/lkml/2020/2/19/714)

I agree, and want to get rid of this tricky behavior.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>

In net/Kconfig, NET_DEVLINK implies NET_DROP_MONITOR.

The original behavior of the 'imply' keyword prevents NET_DROP_MONITOR
from being 'm' when NET_DEVLINK=y.

With the planned Kconfig change that relaxes the 'imply', the
combination of NET_DEVLINK=y and NET_DROP_MONITOR=m would be allowed.

Use IS_REACHABLE() to avoid the vmlinux link error for this case.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

Currently when CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, modpost
only warns when a module is missing namespace imports. Under this
configuration, such a module cannot be loaded into the kernel anyway, as
the module loader would reject it. We might as well return a build
error when a module is missing namespace imports under
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, so that the build
warning does not go ignored/unnoticed.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Rework modpost's logging interface by consolidating merror(), warn(), and
fatal() to use a single function, modpost_log(). Introduce different
logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is
to reduce code duplication when deciding whether or not to warn or error
out based on a condition.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The dt_binding_check target is located outside of the
'ifneq ($(dtstree),) ... endif' block.

So, you can run 'make dt_binding_check' on any architecture.
This makes a perfect sense because the dt-schema is arch-agnostic.

The only one problem I see is that scripts/dtc/dtc is not always built.
For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild
descends into scripts/dtc/ with doing nothing. Then, it fails to build
*.example.dt.yaml files.

Let's build scripts/dtc/dtc forcibly when running dt_binding_check.

The dt-schema does not depend on any CONFIG option either, so you
should be able to run dt_binding_check without the .config file.

Going forward, you can directly run 'make dt_binding_check' in a
pristine source tree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

Since commit 93512dad ("dt-bindings: Improve validation build error
handling"), 'make dtbs_check' does not validate the schema fully.

If you want to check everything, you need to run two commands separately.

  $ make ARCH=arm dt_binding_check
  $ make ARCH=arm dtbs_check

They are exclusive each other, so you cannot do like this:

  $ make ARCH=arm dt_binding_check dtbs_check

In this case, dt-doc-validate and dt-extract-example are skipped
because CHECK_DTBS is set.

Let's make it possible to run these two targets in a single command.
It will be useful for schema writers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

'make dtbs_check' checks the shecma in addition to building *.dtb files,
in other words, 'make dtbs_check' is a super-set of 'make dtbs'.
So, you do not have to do 'make dtbs dtbs_check', but I want to keep
the build system as robust as possible in any use.

Currently, 'dtbs' and 'dtbs_check' are independent of each other.
In parallel building, two threads descend into arch/*/boot/dts/,
one for dtbs and the other for dtbs_check, then end up with building
the same DTB simultaneously.

This commit fixes the concurrency issue. Otherwise, I see build errors
like follows:

$ make ARCH=arm64 defconfig
$ make -j16 ARCH=arm64 DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/psci.yaml dtbs dtbs_check
  <snip>
  DTC     arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb
  DTC     arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
  DTC     arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb
  DTC     arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb
  DTC     arch/arm64/boot/dts/freescale/imx8mn-evk.dtb
  DTC     arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb
  DTC     arch/arm64/boot/dts/zte/zx296718-pcbox.dtb
  DTC     arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml
  DTC     arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
  DTC     arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dtb
  DTC     arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dtb
  DTC     arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb
  CHECK   arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml
fixdep: error opening file: arch/arm64/boot/dts/allwinner/.sun50i-h6-orangepi-lite2.dtb.d: No such file or directory
make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb] Error 2
make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb'
make[2]: *** Waiting for unfinished jobs....
  DTC     arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dtb
  DTC     arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
  DTC     arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dtb
  DTC     arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dtb
fixdep: parse error; no targets found
make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb] Error 1
make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb'
make[1]: *** [scripts/Makefile.build:505: arch/arm64/boot/dts/allwinner] Error 2
make[1]: *** Waiting for unfinished jobs....
  DTC     arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

Now that we have a separate rule for DT binding examples, we can customize
the dtc options. Let's adjust the dtc warnings to me more strict by
default so the examples get cleaned up as they get converted to schema.

Leaving 'avoid_unnecessary_addr_size' and 'graph_child_address' warnings
disabled as examples tend to be incomplete and they generates a lot of
warnings.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.

Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When doing a cold build, autoksyms.h starts empty, and is updated late
in the build process to have visibility over the symbols used by in-tree
drivers. But since the symbol whitelist is known upfront, it can be used
to pre-populate autoksyms.h and maximize the amount of code that can be
compiled to its final state in a single pass, hence reducing build time.

Do this by using gen_autoksyms.sh to initialize autoksyms.h instead of
creating an empty file.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

In order to prepare the ground for a build-time optimization, split
adjust_autoksyms.sh into two scripts: one that generates autoksyms.h
based on all currently available information (whitelist, and .mod
files), and the other to inspect the diff between two versions of
autoksyms.h and trigger appropriate rebuilds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

CONFIG_TRIM_UNUSED_KSYMS currently removes all unused exported symbols
from ksymtab. This works really well when using in-tree drivers, but
cannot be used in its current form if some of them are out-of-tree.

Indeed, even if the list of symbols required by out-of-tree drivers is
known at compile time, the only solution today to guarantee these don't
get trimmed is to set CONFIG_TRIM_UNUSED_KSYMS=n. This not only wastes
space, but also makes it difficult to control the ABI usable by vendor
modules in distribution kernels such as Android. Being able to control
the kernel ABI surface is particularly useful to ship a unique Generic
Kernel Image (GKI) for all vendors, which is a first step in the
direction of getting all vendors to contribute their code upstream.

As such, attempt to improve the situation by enabling users to specify a
symbol 'whitelist' at compile time. Any symbol specified in this
whitelist will be kept exported when CONFIG_TRIM_UNUSED_KSYMS is set,
even if it has no in-tree user. The whitelist is defined as a simple
text file, listing symbols, one per line.
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Most of the Kconfig commands (except defconfig and all*config) read
the .config file as a base set of CONFIG options.

When it does not exist, the files in DEFCONFIG_LIST are searched in
this order and loaded if found.

I do not see much sense in the last two lines in DEFCONFIG_LIST.

[1] ARCH_DEFCONFIG

The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the
ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.

arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or
64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG
should be a fixed string because the base config file is loaded before
the symbol evaluation stage.

Using KBUILD_DEFCONFIG makes more sense because it is fixed before
Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it
in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG
with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".

[2] arch/$(ARCH)/defconfig

This file path is no longer valid. The defconfig files are always located
in the arch configs/ directories.

  $ find arch -name defconfig | sort
  arch/alpha/configs/defconfig
  arch/arm64/configs/defconfig
  arch/csky/configs/defconfig
  arch/nds32/configs/defconfig
  arch/riscv/configs/defconfig
  arch/s390/configs/defconfig
  arch/unicore32/configs/defconfig

The path arch/*/configs/defconfig is already covered by
"arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is
not necessary.

I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise,
the 7 architectures listed above would end up with endless loop of
syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Added to kbuild documentation. Provides more official info on building
kernels with Clang and LLVM than our wiki.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

obj-* needs a trailing slash for a directory, but subdir-* does not
because it already implies a directory.

Also, change subdir-y to subdir- to ensure this is effective only
for cleaning targets.

This makes the cleaning log consistent. (no trailing slash)

Before:

  $ make clean
  CLEAN   Documentation/devicetree/bindings/

After:

  $ make clean
  CLEAN   Documentation/devicetree/bindings
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If *q is '\0', the condition (isalnum(*q) || *q == '_') is false anyway.

It is redundant to ensure non-zero *q.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is probably stale code. In old days (~ Linux 2.5.59), Kbuild made
genksyms generate include/linux/modules/*.ver files.

The currenct Kbuild does not generate *.ver files at all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This CONFIG option was added by commit 35bb5b1e ("Add option to
enable -Wframe-larger-than= on gcc 4.4"). At that time, the cc-option
check was needed.

According to Documentation/process/changes.rst, the current minimal
supported version of GCC is 4.6, so you can assume GCC supports it.
Clang supports it as well.

Remove the cc-option switch and redundant comments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

This reverts a very old commit, which dates back to the pre-git era:

|commit 5d1cfb5b
|Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
|Date:   Sat Jul 27 02:53:19 2002 -0500
|
|    kbuild: Fix compiling/installing as different users
|
|    "make bzImage && sudo make install" had the problem that during
|    the "sudo make install" the build system would notice that the information
|    in include/linux/compile.h is not accurate (it says "compiled by <user>",
|    but we are root), thus causing compile.h to be updated and leading to
|    some recompiles.
|
|    We now only update "compile.h" if the current user is the owner of
|    include/linux/autoconf.h, i.e. the user who did the "make *config". So the
|    above sequence will correctly state "compiled by <user>".
|
|diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
|index 6313db96172..cd956380978 100755
|--- a/scripts/mkcompile_h
|+++ b/scripts/mkcompile_h
|@@ -3,6 +3,17 @@ ARCH=$2
| SMP=$3
| CC=$4
|
|+# If compile.h exists already and we don't own autoconf.h
|+# (i.e. we're not the same user who did make *config), don't
|+# modify compile.h
|+# So "sudo make install" won't change the "compiled by <user>"
|+# do "compiled by root"
|+
|+if [ -r $TARGET -a ! -O ../include/linux/autoconf.h ]; then
|+  echo ' (not modified)'
|+  exit 0
|+fi
|+
| if [ -r ../.version ]; then
|   VERSION=`cat ../.version`
| else

The 'make bzImage && sudo make install' problem no longer happens
because commit 1648e4f8 ("x86, kbuild: make "make install" not
depend on vmlinux") fixed the root cause.

Commit 19514fc6 ("arm, kbuild: make "make install" not depend on
vmlinux") fixed the similar issue on ARM, with detailed explanation.

So, the rule is that the installation targets should never trigger
the builds of any build artifact. By following it, this check is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ext4 fixes from Ted Ts'o:
 "Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
  jbd2: fix data races at struct journal_head

Pull KVM fixes from Paolo Bonzini:
 "More bugfixes, including a few remaining "make W=1" issues such as too
  large frame sizes on some configurations.

  On the ARM side, the compiler was messing up shadow stacks between EL1
  and EL2 code, which is easily fixed with __always_inline"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: check descriptor table exits on instruction emulation
  kvm: x86: Limit the number of "kvm: disabled by bios" messages
  KVM: x86: avoid useless copy of cpufreq policy
  KVM: allow disabling -Werror
  KVM: x86: allow compiling as non-module with W=1
  KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
  KVM: Introduce pv check helpers
  KVM: let declaration of kvm_get_running_vcpus match implementation
  KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
  arm64: Ask the compiler to __always_inline functions used by KVM at HYP
  KVM: arm64: Define our own swab32() to avoid a uapi static inline
  KVM: arm64: Ask the compiler to __always_inline functions used at HYP
  kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
  KVM: arm/arm64: Fix up includes for trace.h

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver bugfixes for you. We agreed on the Mac regression
  to go in via I2C"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  macintosh: therm_windtunnel: fix regression when instantiating devices
  i2c: altera: Fix potential integer overflow
  i2c: jz4780: silence log flood on txabrt

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+