This patch fixes an error in the experimental cifs acl code. During chmod,
set security descriptor data (num aces) is not sent with little-endian encoding.
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Although these experimental operations are not fully implemented, fix the
typo in the definition of the quotactl operations for cifs.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Christoph had noticed too many ifdefs in the CIFS code making it
hard to read.  This patch removes about a quarter of them from
the C files in cifs by improving a few key ifdefs in the .h files.
Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Steve French <sfrench@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
  ide-tape: bump minor driver version
  ide-tape: cleanup the remaining codestyle issues
  ide-tape: fix syntax error in idetape_identify_device()
  ide-tape: remove leftover OnStream support warning
  ide-tape: collect module-related macro calls at the end
  ide-tape: include proper headers
  ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()
  ide-tape: remove struct idetape_id_gcw
  ide-tape: cleanup and fix comments
  ide-tape: shorten some function names
  ide-tape: remove idetape_increase_max_pipeline_stages()
  ide-tape: struct idetape_tape_t: shorten member names v2
  ide-tape: struct idetape_tape_t: remove unused members
  ide-tape: remove typedef idetape_chrdev_direction_t
  ide-tape: simplify code branching in the interrupt handler
  ide-tape: remove unreachable code chunk
  ide-tape: remove struct idetape_read_position_result_t
  ide-tape: refactor the debug logging facility
  ide: add ide_read_error() inline helper
  ide: add ide_read_[alt]status() inline helpers
  ...

* 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  pool: Improve memory usage for devices which can't cross boundaries
  Change dmapool free block management
  dmapool: Tidy up includes and add comments
  dmapool: Validate parameters to dma_pool_create
  Avoid taking waitqueue lock in dmapool
  dmapool: Fix style problems
  Move dmapool.c to mm/ directory

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... thus decreasing checkpatch.pl errors to 0.

Bart:
- remove needless function prototypes while at it
- remove needless parentheses while at it
- add missing KERN_ level to ide_tape_probe()
- other minor fixups
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Spotted by Sergei Shtylyov.

CC: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also, remove redundant ones and cleanup whitespace.

Bart:
- minor fixups
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This function was being used only at one place so fold it in there.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Shorten some member names not too aggressively since this driver might be gone
anyway soon.

Bart:
- minor fixes
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
  idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

.. and replace it with plain enums.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.

Bart:
- move idetape_io_buf before idetape_pc_intr() comment
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function
names.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes resulting from this patch.

Bart:
- remove needless "!!"
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Teach the debug logging macro to differentiate between log levels based on the
type of debug level enabled specifically instead of a threshold-based one.
Thus, convert tape->debug_level to a bitmask that is written to over /proc.

Also,
- cleanup and simplify the debug macro thus removing a lot of code lines,
- get rid of unused debug levels,
- adjust the loglevel at several places where it was simply missing (e.g.
  idetape_chrdev_open())
- move the tape ptr initialization up in idetape_chrdev_open() so that we can
  use it in the debug_log macro earlier in the function.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).

buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().

falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
  also fix return value of falconide_init() while at it.

gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().

macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
  (fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).

q40ide.c:
* Fix q40_ide_setup_ports() comments.

ide.c:
* Remove no longer needed ide_setup_ports().

Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Same BUG_ON() is present inside ide_set_handler().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove write-only ->sata_misc[] from ide_hwif_t.

* Remove no longer used SATA_{MISC,PHY,IEN}_OFFSET defines.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
  check_media_bay() by CONFIG_MAC_FLOPPY one.

* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
  CONFIG_BLK_DEV_IDE_PMAC ones.

* check_media_bay() is used only by drivers/block/swim3.c
  so make this function available only if CONFIG_MAC_FLOPPY
  is defined.

* check_media_bay_by_base() and media_bay_set_ide_infos()
  are used only by drivers/ide/ppc/pmac.c so so make these
  functions available only if CONFIG_MAC_FLOPPY is defined.

v2:
* Remove ifdefs from function prototypes. (Andrew Morton)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

with module_param macro, the __setup code can be killed now:
	const __setup("all-generic-ide", ide_generic_all_on);

and the module name "generic.ko" is not descriptive to its functionality,
can be changed in Makefile, the "ide-pci-generic.ko" is better.

the ide-pci-generic.all-generic-ide parameter also documented
in Documentation/kernel-parameters.txt
Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/legacy/hd.c: In function 'hd_request':
drivers/ide/legacy/hd.c:424: warning: 'stat' may be used uninitialized in this function

gcc is being stupid.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-acpi.c: In function 'ide_acpi_init':
drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is Palmchip BK3710 IDE controller support.

The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes.
Supports interface to Compact Flash (CF) configured in True-IDE mode.

Bart:
- remove dead code
- fix ide_hwif_setup_dma() build problem
Signed-off-by: Anton Salnikov <asalnikov@ru.mvista.com>
Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Tuesday 05 February 2008, Linus Torvalds wrote:
> 
> On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote:
> > 
> > * next part of IDE probing code re-organization saga
> >   (that would be me)
> 
> This seems to cause very irritating and bogus messages for me:
> 
>       Probing IDE interface ide0...
>       Probing IDE interface ide1...
>       ide2: I/O resource 0x0-0x7 not free.
>       ide2: ports already in use, skipping probe
>       ide3: I/O resource 0x0-0x7 not free.
>       ide3: ports already in use, skipping probe
>       ide4: I/O resource 0x0-0x7 not free.
>       ide4: ports already in use, skipping probe
>       ide5: I/O resource 0x0-0x7 not free.
>       ide5: ports already in use, skipping probe
>       ide6: I/O resource 0x0-0x7 not free.
>       ide6: ports already in use, skipping probe
>       ide7: I/O resource 0x0-0x7 not free.
>       ide7: ports already in use, skipping probe
>       ide8: I/O resource 0x0-0x7 not free.
>       ide8: ports already in use, skipping probe
>       ide9: I/O resource 0x0-0x7 not free.
>       ide9: ports already in use, skipping probe
> 
> and that's just totally bogus. It shouldn't even request that region, 
> since it's not been allocated!

The commit 139ddfca ("ide: move handling of
I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe
check vs ide_hwif_request_regions() call (so that we now reserve I/O regions
before checking for hwif->noprobe).  However ide-generic host driver depended
on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots.

Fix it by passing only indexes of non-empty slots to ide_device_add_all()
from ide_generic_init().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

smbfs is a bit buggy and has no maintainer.  Change it to shout at the user on
the first five mount attempts - tell them to switch to CIFS.

Come December we'll mark it BROKEN and see what happens.

[olecom@flower.upol.cz: documentation update]
Cc: Urban Widmark <urban@teststation.com>
Acked-by: Steven French <sfrench@us.ibm.com>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Hmm. Someone removed the timerfd() syscall...
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When change_page_attr splits a large page on x86_32 (without PAE), it is
currently corrupting every process's page directory: fix that by removing
the thinko which passes down a physical instead of a virtual address.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>