- 24 Jun, 2016 28 commits
-
-
Torsten Hilbrich authored
commit dab38e43 upstream. Tested with Lenovo Ultradock. Fixes the non-working headphone jack on the docking unit. Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit 6fbae35a upstream. Support new codecs for ALC700/ALC701/ALC703. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Kailang Yang authored
commit e69e7e03 upstream. That is some different register for ALC255 and ALC256. ALC256 can't fit with some ALC255 register. This issue is cause from LDO output voltage control. This patch is updated the right LDO register value. Signed-off-by:
-
AceLan Kao authored
commit f90d83b3 upstream. Add the pin configuration value of this machine into the pin_quirk table to make DELL1_MIC_NO_PRESENCE apply to this machine. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
Vinod Koul authored
commit 35639a0e upstream. Kabylake shows up as PCI ID 0xa171. And Kabylake-LP as 0x9d71. Since these are similar to Skylake add these to SKL_PLUS macro Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit c622a3c2 upstream. Found by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000120 IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] PGD 6f80b067 PUD b6535067 PMD 0 Oops: 0000 [#1] SMP CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 [...] Call Trace: [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm] [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm] [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a1062>] tracesys_phase2+0x84/0x89 Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85 RIP [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] RSP <ffff8800926cbca8> CR2: 0000000000000120 Testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[26]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); struct kvm_irqfd ifd; ifd.fd = syscall(SYS_eventfd2, 5, 0); ifd.gsi = 3; ifd.flags = 2; ifd.resamplefd = ifd.fd; r[25] = ioctl(r[3], KVM_IRQFD, &ifd); return 0; } Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit d14bdb55 upstream. MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to any of bits 63:32. However, this is not detected at KVM_SET_DEBUGREGS time, and the next KVM_RUN oopses: general protection fault: 0000 [#1] SMP CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 [...] Call Trace: [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm] [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40 RSP <ffff88005836bd50> Testcase (beautified/reduced from syzkaller output): #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[8]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); memcpy(&dr, "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72" "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8" "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9" "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb", 48); r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr); r[6] = ioctl(r[4], KVM_RUN, 0); } Reported-by:
-
David Wragg authored
[ Upstream commit 7e059158 ] Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by:
David Wragg <david@weave.works> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Wragg authored
[ Upstream commit 55e5bfb5 ] Allow the MTU of geneve devices to be set to large values, in order to exploit underlying networks with larger frame sizes. GENEVE does not have a fixed encapsulation overhead (an openvswitch rule can add variable length options), so there is no relevant maximum MTU to enforce. A maximum of IP_MAX_MTU is used instead. Encapsulated packets that are too big for the underlying network will get dropped on the floor. Signed-off-by:
-
David Wragg authored
[ Upstream commit 72564b59 ] Allow the MTU of vxlan devices without an underlying device to be set to larger values (up to a maximum based on IP packet limits and vxlan overhead). Previously, their MTUs could not be set to higher than the conventional ethernet value of 1500. This is a very arbitrary value in the context of vxlan, and prevented vxlan devices from being able to take advantage of jumbo frames etc. The default MTU remains 1500, for compatibility. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Jakub Sitnicki authored
[ Upstream commit 00bc0ef5 ] At present we perform an xfrm_lookup() for each UDPv6 message we send. The lookup involves querying the flow cache (flow_cache_lookup) and, in case of a cache miss, creating an XFRM bundle. If we miss the flow cache, we can end up creating a new bundle and deriving the path MTU (xfrm_init_pmtu) from on an already transformed dst_entry, which we pass from the socket cache (sk->sk_dst_cache) down to xfrm_lookup(). This can happen only if we're caching the dst_entry in the socket, that is when we're using a connected UDP socket. To put it another way, the path MTU shrinks each time we miss the flow cache, which later on leads to incorrectly fragmented payload. It can be observed with ESPv6 in transport mode: 1) Set up a transformation and lower the MTU to trigger fragmentation # ip xfrm policy add dir out src ::1 dst ::1 \ tmpl src ::1 dst ::1 proto esp spi 1 # ip xfrm state add src ::1 dst ::1 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b # ip link set dev lo mtu 1500 2) Monitor the packet flow and set up an UDP sink # tcpdump -ni lo -ttt & # socat udp6-listen:12345,fork /dev/null & 3) Send a datagram that needs fragmentation with a connected socket # perl -e 'print "@" x 1470 | socat - udp6:[::1]:12345 2016/06/07 18:52:52 socat[724] E read(3, 0x555bb3d5ba00, 8192): Protocol error 00:00:00.000000 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x2), length 1448 00:00:00.000014 IP6 ::1 > ::1: frag (1448|32) 00:00:00.000050 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x3), length 1272 (^ ICMPv6 Parameter Problem) 00:00:00.000022 IP6 ::1 > ::1: ESP(spi=0x00000001,seq=0x5), length 136 4) Compare it to a non-connected socket # perl -e 'print "@" x 1500' | socat - udp6-sendto:[::1]:12345 00:00:40.535488 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x6), length 1448 00:00:00.000010 IP6 ::1 > ::1: frag (1448|64) What happens in step (3) is: 1) when connecting the socket in __ip6_datagram_connect(), we perform an XFRM lookup, miss the flow cache, create an XFRM bundle, and cache the destination, 2) afterwards, when sending the datagram, we perform an XFRM lookup, again, miss the flow cache (due to mismatch of flowi6_iif and flowi6_oif, which is an issue of its own), and recreate an XFRM bundle based on the cached (and already transformed) destination. To prevent the recreation of an XFRM bundle, avoid an XFRM lookup altogether whenever we already have a destination entry cached in the socket. This prevents the path MTU shrinkage and brings us on par with UDPv4. The fix also benefits connected PINGv6 sockets, another user of ip6_sk_dst_lookup_flow(), who also suffer messages being transformed twice. Joint work with Hannes Frederic Sowa. Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit a5c5e2da ] Unused fields of udp_cfg must be all zeros. Otherwise setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete callbacks with garbage, eventually resulting in panic when used by udp_gro_receive(). [ 72.694123] BUG: unable to handle kernel paging request at ffff880033f87d78 [ 72.695518] IP: [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] PGD 26e2067 PUD 26e3067 PMD 342ed063 PTE 8000000033f87163 [ 72.696530] Oops: 0011 [#1] SMP KASAN [ 72.696530] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pptp gre pppox ppp_generic slhc crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel evdev aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper serio_raw acpi_cpufreq button proc\ essor ext4 crc16 jbd2 mbcache virtio_blk virtio_net virtio_pci virtio_ring virtio [ 72.696530] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc1 #1 [ 72.696530] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 72.696530] task: ffff880035b59700 ti: ffff880035b70000 task.ti: ffff880035b70000 [ 72.696530] RIP: 0010:[<ffff880033f87d78>] [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP: 0018:ffff880035f87bc0 EFLAGS: 00010246 [ 72.696530] RAX: ffffed000698f996 RBX: ffff88003326b840 RCX: ffffffff814cc823 [ 72.696530] RDX: ffff88003326b840 RSI: ffff880033e48038 RDI: ffff880034c7c780 [ 72.696530] RBP: ffff880035f87c18 R08: 000000000000a506 R09: 0000000000000000 [ 72.696530] R10: ffff880035f87b38 R11: ffff880034b9344d R12: 00000000ebfea715 [ 72.696530] R13: 0000000000000000 R14: ffff880034c7c780 R15: 0000000000000000 [ 72.696530] FS: 0000000000000000(0000) GS:ffff880035f80000(0000) knlGS:0000000000000000 [ 72.696530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.696530] CR2: ffff880033f87d78 CR3: 0000000033c98000 CR4: 00000000000406a0 [ 72.696530] Stack: [ 72.696530] ffffffff814cc834 ffff880034b93468 0000001481416818 ffff88003326b874 [ 72.696530] ffff880034c7ccb0 ffff880033e48038 ffff88003326b840 ffff880034b93462 [ 72.696530] ffff88003326b88a ffff88003326b88c ffff880034b93468 ffff880035f87c70 [ 72.696530] Call Trace: [ 72.696530] <IRQ> [ 72.696530] [<ffffffff814cc834>] ? udp_gro_receive+0x1c6/0x1f9 [ 72.696530] [<ffffffff814ccb1c>] udp4_gro_receive+0x2b5/0x310 [ 72.696530] [<ffffffff814d989b>] inet_gro_receive+0x4a3/0x4cd [ 72.696530] [<ffffffff81431b32>] dev_gro_receive+0x584/0x7a3 [ 72.696530] [<ffffffff810adf7a>] ? __lock_is_held+0x29/0x64 [ 72.696530] [<ffffffff814321f7>] napi_gro_receive+0x124/0x21d [ 72.696530] [<ffffffffa000b145>] virtnet_receive+0x8df/0x8f6 [virtio_net] [ 72.696530] [<ffffffffa000b27e>] virtnet_poll+0x1d/0x8d [virtio_net] [ 72.696530] [<ffffffff81431350>] net_rx_action+0x15b/0x3b9 [ 72.696530] [<ffffffff815893d6>] __do_softirq+0x216/0x546 [ 72.696530] [<ffffffff81062392>] irq_exit+0x49/0xb6 [ 72.696530] [<ffffffff81588e9a>] do_IRQ+0xe2/0xfa [ 72.696530] [<ffffffff81587a49>] common_interrupt+0x89/0x89 [ 72.696530] <EOI> [ 72.696530] [<ffffffff810b05df>] ? trace_hardirqs_on_caller+0x229/0x270 [ 72.696530] [<ffffffff8102b3c7>] ? default_idle+0x1c/0x2d [ 72.696530] [<ffffffff8102b3c5>] ? default_idle+0x1a/0x2d [ 72.696530] [<ffffffff8102bb8c>] arch_cpu_idle+0xa/0xc [ 72.696530] [<ffffffff810a6c39>] default_idle_call+0x1a/0x1c [ 72.696530] [<ffffffff810a6d96>] cpu_startup_entry+0x15b/0x20f [ 72.696530] [<ffffffff81039a81>] start_secondary+0x12c/0x133 [ 72.696530] Code: ff ff ff ff ff ff ff ff ff ff 7f ff ff ff ff ff ff ff 7f 00 7e f8 33 00 88 ff ff 6d 61 58 81 ff ff ff ff 5e de 0a 81 ff ff ff ff <00> 5c e2 34 00 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 72.696530] RIP [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP <ffff880035f87bc0> [ 72.696530] CR2: ffff880033f87d78 [ 72.696530] ---[ end trace ad7758b9a1dccf99 ]--- [ 72.696530] Kernel panic - not syncing: Fatal exception in interrupt [ 72.696530] Kernel Offset: disabled [ 72.696530] ---[ end Kernel panic - not syncing: Fatal exception in interrupt v2: use empty initialiser instead of "{ NULL }" to avoid relying on first field's type. Fixes: 38fd2af2 ("udp: Add socket based GRO and config") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 0b148def ] The missing br_vlan_should_use() test caused creation of an unneeded local fdb entry on changing mac address of a bridge device when there is a vlan which is configured on a bridge port but not on the bridge device. Fixes: 2594e906 ("bridge: vlan: add per-vlan struct and move to rhashtables") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit ce3cf4ec ] The v6 tcp stats scan do not provide TLP and ER timer information correctly like the v4 version . This patch fixes that. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Fixes: eed530b6 ("tcp: early retransmit") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Chen Haiquan authored
[ Upstream commit ce577668 ] When create a new vxlan link, example: ip link add vtap mtu 1440 type vxlan vni 1 dev eth0 The argument "mtu" has no effect, because it is not set to conf->mtu. The default value is used in vxlan_dev_configure function. This problem was introduced by commit 0dfbdf41 (vxlan: Factor out device configuration). Fixes: 0dfbdf41 (vxlan: Factor out device configuration) Signed-off-by:
Chen Haiquan <oc@yunify.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit f6988cb6 ] The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d51 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d51 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Edward Cree authored
[ Upstream commit c0795bf6 ] Otherwise, if we fail to allocate new PIO buffers, our TXQs will try to use the old ones, which aren't there any more. Fixes: 183233be "sfc: Allocate and link PIO buffers; map them with write-combining" Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 612bacad ] Follow-up to commit e27f4a94 ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), which removes the FS_USERNS_MOUNT flag. The original idea was to have a per mountns instance instead of a single global fs instance, but that didn't work out and we had to switch to mount_nodev() model. The intent of that middle ground was that we avoid users who don't play nice to create endless instances of bpf fs which are difficult to control and discover from an admin point of view, but at the same time it would have allowed us to be more flexible with regard to namespaces. Therefore, since we now did the switch to mount_nodev() as a fix where individual instances are created, we also need to remove userns mount flag along with it to avoid running into mentioned situation. I don't expect any breakage at this early point in time with removing the flag and we can revisit this later should the requirement for this come up with future users. This and commit e27f4a94 have been split to facilitate tracking should any of them run into the unlikely case of causing a regression. Fixes: b2197755 ("bpf: add support for persistent maps/progs") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit f0a3fdca ] These structures are defined only if __USE_MISC is set in glibc net/if.h headers, ie when _BSD_SOURCE or _SVID_SOURCE are defined. CC: Jan Engelhardt <jengelh@inai.de> CC: Josh Boyer <jwboyer@fedoraproject.org> CC: Stephen Hemminger <shemming@brocade.com> CC: Waldemar Brodkorb <mail@waldemar-brodkorb.de> CC: Gabriel Laskar <gabriel@lse.epita.fr> CC: Mikko Rapeli <mikko.rapeli@iki.fi> Fixes: 4a91cb61 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit e5aed006 ] In case we find a socket with encapsulation enabled we should call the encap_recv function even if just a udp header without payload is available. The callbacks are responsible for correctly verifying and dropping the packets. Also, in case the header validation fails for geneve and vxlan we shouldn't put the skb back into the socket queue, no one will pick them up there. Instead we can simply discard them in the respective encap_recv functions. Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit e27f4a94 ] While reviewing the filesystems that set FS_USERNS_MOUNT I spotted the bpf filesystem. Looking at the code I saw a broken usage of mount_ns with current->nsproxy->mnt_ns. As the code does not acquire a reference to the mount namespace it can not possibly be correct to store the mount namespace on the superblock as it does. Replace mount_ns with mount_nodev so that each mount of the bpf filesystem returns a distinct instance, and the code is not buggy. In discussion with Hannes Frederic Sowa it was reported that the use of mount_ns was an attempt to have one bpf instance per mount namespace, in an attempt to keep resources that pin resources from hiding. That intent simply does not work, the vfs is not built to allow that kind of behavior. Which means that the bpf filesystem really is buggy both semantically and in it's implemenation as it does not nor can it implement the original intent. This change is userspace visible, but my experience with similar filesystems leads me to believe nothing will break with a model of each mount of the bpf filesystem is distinct from all others. Fixes: b2197755 ("bpf: add support for persistent maps/progs") Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Jason Wang authored
[ Upstream commit addf8fc4 ] We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdc ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdc ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit da4ed551 ] The problem is that fib_info->nh is [0] so the struct fib_info allocation size depends on number of nexthops. If we just copy fib_info, we do not copy the nexthops info and driver accesses memory which is not ours. Given the fact that fib4 does not defer operations and therefore it does not need copy, just pass the pointer down to drivers as it was done before. Fixes: 850d0cbc ("switchdev: remove pointers from switchdev objects") Signed-off-by:
-
Richard Alpe authored
[ Upstream commit 03aaaa9b ] The publication field of the old netlink API should contain the publication key and not the publication reference. Fixes: 44a8ae94 (tipc: convert legacy nl name table dump to nl compat) Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 92964c79 ] When we free cb->skb after a dump, we do it after releasing the lock. This means that a new dump could have started in the time being and we'll end up freeing their skb instead of ours. This patch saves the skb and module before we unlock so we free the right memory. Fixes: 16b304f3 ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
-
Richard Alpe authored
[ Upstream commit 45e093ae ] Make sure the socket for which the user is listing publication exists before parsing the socket netlink attributes. Prior to this patch a call without any socket caused a NULL pointer dereference in tipc_nl_publ_dump(). Tested-and-reported-by:
Jon Maloy <jon.maloy@ericsson.cm> Signed-off-by:
-
Ewan D. Milne authored
commit fbd83006 upstream. Linux fails to boot as a guest with a QEMU CD-ROM: [ 4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100 [ 4.443649] ata2.00: configured for MWDMA2 [ 4.450267] scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 [ 4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.464319] ata2.00: BMDMA stat 0x5 [ 4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.464339] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.464341] ata2.00: status: { DRDY DRQ } [ 4.465864] ata2: soft resetting link [ 4.625971] ata2.00: configured for MWDMA2 [ 4.628290] ata2: EH complete [ 4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.646671] ata2.00: BMDMA stat 0x5 [ 4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.646683] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.646685] ata2.00: status: { DRDY DRQ } [ 4.648193] ata2: soft resetting link ... Fix this by suppressing VPD inquiry for this device. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Bottomley authored
commit a621bac3 upstream. When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Reported-by:
Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by:
James E.J. Bottomley <jejb@linux.vnet.ibm.com> Tested-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
- 08 Jun, 2016 12 commits
-
-
Greg Kroah-Hartman authored
-
Dave Chinner authored
commit 7d6a13f0 upstream. When we do dquot readahead in log recovery, we do not use a verifier as the underlying buffer may not have dquots in it. e.g. the allocation operation hasn't yet been replayed. Hence we do not want to fail recovery because we detect an operation to be replayed has not been run yet. This problem was addressed for inodes in commit d8914002 ("xfs: inode buffers may not be valid during recovery readahead") but the problem was not recognised to exist for dquots and their buffers as the dquot readahead did not have a verifier. The result of not using a verifier is that when the buffer is then next read to replay a dquot modification, the dquot buffer verifier will only be attached to the buffer if *readahead is not complete*. Hence we can read the buffer, replay the dquot changes and then add it to the delwri submission list without it having a verifier attached to it. This then generates warnings in xfs_buf_ioapply(), which catches and warns about this case. Fix this and make it handle the same readahead verifier error cases as for inode buffers by adding a new readahead verifier that has a write operation as well as a read operation that marks the buffer as not done if any corruption is detected. Also make sure we don't run readahead if the dquot buffer has been marked as cancelled by recovery. This will result in readahead either succeeding and the buffer having a valid write verifier, or readahead failing and the buffer state requiring the subsequent read to resubmit the IO with the new verifier. In either case, this will result in the buffer always ending up with a valid write verifier on it. Note: we also need to fix the inode buffer readahead error handling to mark the buffer with EIO. Brian noticed the code I copied from there wrong during review, so fix it at the same time. Add comments linking the two functions that handle readahead verifier errors together so we don't forget this behavioural link in future. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Eric Sandeen authored
commit 233135b7 upstream. This adds a name to each buf_ops structure, so that if a verifier fails we can print the type of verifier that failed it. Should be a slight debugging aid, I hope. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Dave Chinner authored
commit 7d3aa7fe upstream. We don't write back stale inodes so we should skip them in xfs_iflush_cluster, too. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dave Chinner authored
commit 51b07f30 upstream. Some careless idiot(*) wrote crap code in commit 1a3e8f3d ("xfs: convert inode cache lookups to use RCU locking") back in late 2010, and so xfs_iflush_cluster checks the wrong inode for whether it is still valid under RCU protection. Fix it to lock and check the correct inode. (*) Careless-idiot: Dave Chinner <dchinner@redhat.com> Discovered-by:
-
Dave Chinner authored
commit b1438f47 upstream. When a failure due to an inode buffer occurs, the error handling fails to abort the inode writeback correctly. This can result in the inode being reclaimed whilst still in the AIL, leading to use-after-free situations as well as filesystems that cannot be unmounted as the inode log items left in the AIL never get removed. Fix this by ensuring fatal errors from xfs_imap_to_bp() result in the inode flush being aborted correctly. Reported-by:
Shyam Kaushik <shyam@zadarastorage.com> Diagnosed-by:
-
Dave Chinner authored
commit ad747e3b upstream. Commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") allowed the freelist to use the empty slot at the end of the freelist on 64 bit systems that was not being used due to sizeof() rounding up the structure size. This has caused versions of xfs_repair prior to 4.5.0 (which also has the fix) to report this as a corruption once the filesystem has been grown. Older kernels can also have problems (seen from a whacky container/vm management environment) mounting filesystems grown on a system with a newer kernel than the vm/container it is deployed on. To avoid this problem, change the initial free list indexes not to wrap across the end of the AGFL, hence avoiding the initialisation of agf_fllast to the last index in the AGFL. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eric Sandeen authored
commit d0a58e83 upstream. Today, a kernel which refuses to mount a filesystem read-write due to unknown ro-compat features can still transition to read-write via the remount path. The old kernel is most likely none the wiser, because it's unaware of the new feature, and isn't using it. However, writing to the filesystem may well corrupt metadata related to that new feature, and moving to a newer kernel which understand the feature will have problems. Right now the only ro-compat feature we have is the free inode btree, which showed up in v3.16. It would be good to push this back to all the active stable kernels, I think, so that if anyone is using newer mkfs (which enables the finobt feature) with older kernel releases, they'll be protected. Signed-off-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
commit c87bf431 upstream. Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx': lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=] After some investigation, I found that this behavior started with gcc-4.9, and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702. A suggested workaround for it is to use the -fno-tree-loop-im flag that turns off one of the optimization stages in gcc, so the code runs a little slower but does not use excessive amounts of stack. We could make this conditional on the gcc version, but I could not find an easy way to do this in Kbuild and the benefit would be fairly small, given that most of the gcc version in production are affected now. I'm marking this for 'stable' backports because it addresses a bug with code generation in gcc that exists in all kernel versions with the affected gcc releases. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit 65a9f31c upstream. After commit 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets"), it is no longer possible to specify RPMOPTS. For example, we can no longer able to control _topdir using the following make command. make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg Fixes: 21a59991 ("scripts/package/Makefile: rpmbuild is needed for rpm targets") Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 3017cd63 upstream. With netconsole (at least) the pr_err("... disablingn") call can recurse back into the dma-debug code, where it'll try to grab free_entries_lock again. Avoid the problem by doing the printk after dropping the lock. Link: http://lkml.kernel.org/r/1463678421-18683-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 3a17fb32 upstream. Grygorii Strashko reports: The PM runtime will be left disabled for the device if its .suspend_late() callback fails and async suspend is not allowed for this device. In this case device will not be added in dpm_late_early_list and dpm_resume_early() will ignore this device, as result PM runtime will be disabled for it forever (side effect: after 8 subsequent failures for the same device the PM runtime will be reenabled due to disable_depth overflow). To fix this problem, add devices to dpm_late_early_list regardless of whether or not device_suspend_late() returns errors for them. That will ensure failures in there to be handled consistently for all devices regardless of their async suspend/resume status. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
