- 23 Feb, 2016 26 commits
-
-
Vivien Didelot authored
The DSA drivers now have access to the VLAN prepare phase and the bridge net_device. It is easier to check for overlapping bridges from within the driver. Thus add such check in mv88e6xxx_port_vlan_prepare. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Some DSA drivers may or may not support multiple software bridges on top of an hardware switch. It is more convenient for them to access the bridge's net_device for finer configuration. Removing the need to craft and access a bitmask also simplifies the code. This patch changes the signature of bridge related functions, update DSA drivers, and removes dsa_slave_br_port_mask. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add a per-port mv88e6xxx_priv_port structure to store per-port related data, instead of adding several arrays of DSA_MAX_PORTS elements in the mv88e6xxx_priv_state structure. It currently only contains the port STP state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== pull request [net-next]: batman-adv 20160223 This is a cleanup patchset: first the BATADV_BONDING_TQ_THRESHOLD constant gets removed as it was defined but not used anywhere, then all our *_free_ref functions are renamed to *_put in order to follow the kernel naming convention by Sven Eckelmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We were changing return values and accidentally made rocker_world_port_obj_vlan_add() into a no-op. Fixes: fccd84d4 ('rocker: return -EOPNOTSUPP for undefined world ops') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
-
Antonio Quartulli authored
BATADV_BONDING_TQ_THRESHOLD is not used anymore since the implementation of the bat_neigh_is_similar_or_better() API function. Such function uses the more generic BATADV_TQ_SIMILARITY_THRESHOLD constant. Therefore, remove definition of the unused BATADV_BONDING_TQ_THRESHOLD constant. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Feb, 2016 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two fixes headed for stable: - Remove an unnecessary speed_index lookup for thermal hook in the gpio-fan driver. The unnecessary speed lookup can hog the system. - Handle negative conversion values correctly in the ads1015 driver" * tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (ads1015) Handle negative conversion values correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "One ocrdma fix: - The new CQ API support was added to ocrdma, but they got the arming logic wrong, so without this, transfers eventually fail when they fail to arm the interrupt properly under load Two related fixes for mlx4: - When we added the 64bit extended counters support to the core IB code, they forgot to update the RoCE side of the mlx4 driver (the IB side they properly updated). I debated whether or not to include these patches as they could be considered feature enablement patches, but the existing code will blindy copy the 32bit counters, whether any counters were requested at all (a bug). These two patches make it (a) check to see that counters were requested and (b) copy the right counters (the 64bit support is new, the 32bit is not). For that reason I went ahead and took them" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx4: Add support for the port info class for RoCE ports IB/mlx4: Add support for extended counters over RoCE ports RDMA/ocrdma: Fix arm logic to align with new cq API
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C for you: A fix for a RuntimePM regression with OMAP, a fix to enable TCO for Lewisburg platforms, and a typo fix while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Adding Intel Lewisburg support for iTCO i2c: uniphier: fix typos in error messages i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
-
Ray Bellis authored
We can already use yylval in the lexer for encoding the BPF extension number, so that the parser rules can be further reduced to a single one for each B/H/W case. Signed-off-by: Ray Bellis <ray@isc.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudip Mukherjee authored
While building keystone_defconfig of arm we are getting build failure with the error: drivers/net/ethernet/ti/netcp_core.c:1846:31: error: invalid type argument of '->' (have 'struct tc_to_netdev') if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) ^ drivers/net/ethernet/ti/netcp_core.c:1851:35: error: invalid type argument of '->' (have 'struct tc_to_netdev') (dev->real_num_tx_queues < tc->tc)) ^ drivers/net/ethernet/ti/netcp_core.c:1855:8: error: invalid type argument of '->' (have 'struct tc_to_netdev') if (tc->tc) { ^ drivers/net/ethernet/ti/netcp_core.c:1856:28: error: invalid type argument of '->' (have 'struct tc_to_netdev') netdev_set_num_tc(dev, tc->tc); ^ drivers/net/ethernet/ti/netcp_core.c:1857:21: error: invalid type argument of '->' (have 'struct tc_to_netdev') for (i = 0; i < tc->tc; i++) ^ drivers/net/ethernet/ti/netcp_core.c: At top level: drivers/net/ethernet/ti/netcp_core.c:1879:2: warning: initialization from incompatible pointer type .ndo_setup_tc = netcp_setup_tc, ^ The callback of ndo_setup_tc should be: int (*ndo_setup_tc)(struct net_device *dev, u32 handle, __be16 protocol, struct tc_to_netdev *tc); But we missed marking the last argument as a pointer. Fixes: 16e5cc64 ("net: rework setup_tc ndo op to consume general tc operand") CC: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-21 this is a pull reqeust of one patch for net/master. The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the ems_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: Fix 848xx phys This series contains link-related fixes, mostly for the 848xx phys [2 patches are for 84833, and 2 patches are for 84858]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Driver updates This contains various minor changes to driver - changing memory allocation, fixing a small theoretical bug, as well as some mostly-semantic changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-