- 18 Dec, 2019 40 commits
-
-
Hugo Hu authored
Signed-off-by:
Hugo Hu <hugo.hu@amd.com> Reviewed-by:
Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] The DMUB is put into reset on suspend and is not running on resume, disabling PSR/ABM features. [How] Move the allocation of the framebuffer to sw_init. Do DMUB hardware init and framebuffer filling only from hw_init. On resume the contents of the framebuffer will be invalid so those should be cleared. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Nikola Cornij authored
[why] Up to 4 ODM memory pieces are required per ODM combine and cannot overlap, i.e. each ODM "session" has to use its own memory pieces. The ODM-memory mapping is currently broken for generic case. The maximum number of memory pieces is ASIC-dependent, but it's always big enough to satisfy maximum number of ODM combines. Memory pieces are mapped as a bit-map, i.e. one memory piece corresponds to one bit. The OPTC doing ODM needs to select memory pieces by setting the corresponding bits, making sure there's no overlap with other OPTC instances that might be doing ODM. The current mapping works only for OPTC instance indexes smaller than 3. For instance indexes 3 and up it practically maps no ODM memory, causing black, gray or white screen in display configs that include ODM on OPTC instance 3 or up. [how] Statically map two unique ODM memory pieces for each OPTC instance and piece them together when programming ODM combine mode. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Charlene Liu authored
Add warmup escape support, for diags, in a way that is possible to choose a new or an existing sequence. For achieving this goal, this commit adds separated MCIF buffer as VCN request. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Josip Pavic authored
[Why] When the global variable pow_buffer_ptr is set to -1, by definition optimizations should not be used to build the regamma. Since translate_from_linear_space unconditionally increments this global, it inadvertently enables the optimization. [How] Increment pow_buffer_ptr only if it is not -1. Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Aric Cyr authored
[Why] Scaling better handled by upper layers before pipe splitting. [How] Remove DC code for integer scaling and force cursor update if viewport or scaling changes occur to prevent underflow from invalid cursor position. Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Martin Leung authored
[why] dc previously had bugs that interfered with the ability to inherit a timing from a device with multiple streams (without flash/blanking). After this fix there is still a dependency on UEFI support. [how] fixed 3 bugs: loaded MPC state, changed bw_optimize flag to a counter instead of a boolean, and reading dpp/disp clk from HW to ensure we don't raise the clock's when we're not supposed to. Signed-off-by:
Martin Leung <martin.leung@amd.com> Reviewed-by:
-
Roman Li authored
[Why] Some 10bit eDP panels don't lightup after we cap bpc to 8. [How] Set default max_bpc to 16 for edp connector type. Signed-off-by:
-
Noah Abradjian authored
[Why] Currently, pipe resources are assigned to an index that matches the pipe position. However, if pipe 1 or 2 is disabled, there will be a gap in the arrays which causes a crash when iterating based on pipe_count. [How] Fix resource construct to assign resources to minimum available array index. Signed-off-by:
Noah Abradjian <noah.abradjian@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Eric Yang authored
[Why] Need previously implemented chroma vp wa to work for rotation cases. [How] Implement rotation specific wa. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Noah Abradjian authored
[Why] There is one opp per pipe. For certain RN parts, the fourth pipe is disabled, so there is no opp for it. res_cap->num_opp is hardcoded to 4, so if we use that to iterate over opps we will crash. [How] Use the pipe_count value instead, which is not hardcoded and so will have the correct number. Signed-off-by:
-
Amanda Liu authored
[why] We want to streamline the calculations made when entering LFC. Previously, the optimizations led to screen tearing and were backed out to unblock development. [how] Integrate other calculations parameters, as well as screen tearing, fixes with the original LFC calculation optimizations. Signed-off-by:
Amanda Liu <amanda.liu@amd.com> Reviewed-by:
-
Qingqing Zhuo authored
YQ should be limited range for all cases. Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by:
-
Camille Cho authored
[Why] A hardcoded number is used today [How] Add definition for number of BL data points Signed-off-by:
Camille Cho <Camille.Cho@amd.com> Reviewed-by:
-
Joshua Aberback authored
[Why] For some use cases we need to be able to adjust the maximum target bpp allowed by DSC policy. [How] New interface dc_dsc_policy_set_max_target_bpp_limit Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
-
Aidan Yang authored
[Why] Integer scaling is applied to MPO planes when downscaling, MPO planes use variable taps and integer scaling sets taps=1 [How] Disable integer scaling on MPO planes, Disable integer scaling for downscaling planes Signed-off-by:
Aidan Yang <Aidan.Yang@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] CW0 and CW1 need to use physical addressing mode for dcn20 and dcn21. The current code for dcn20 is using virtual. [How] We already program the DMCUB like this on dcn21 so we should just use the same sequence for both. Copy the dcn21 sequences into the dmjub_dcn20.c file and rename them. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] These values can differ per ASIC and should follow the full DC style register programming model. [How] Define a common list and fill in the common list separately for dcn20 and dcn21. Unlike DC we're not using designated initializers for better compiler compatibility since this resides in the DMUB service. Signed-off-by:
-
Noah Abradjian authored
[Why] Lack of proper timing caused intermittent underflow on unplug external DP. A previous fix was invalid and caused S0i3 regression, so had to be reverted. [How] When unlocking pipe, wait for no pipes to have flip pending before unlocking. Signed-off-by:
-
abdoulaye berthe authored
Signed-off-by:
George Shen <George.Shen@amd.com> Acked-by:
-
Charlene Liu authored
Add HDMI 2.x audio bandwidth check Signed-off-by:
-
Leo Liu authored
For VCN2.0 and above, VCN has been separated from JPEG Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Leo Liu authored
Because VCN1.0 power management and DPG mode are managed together with JPEG1.0 under both HW and FW, so separated them from general VCN code. Also the multiple instances case got removed, since VCN1.0 HW just have a single instance. v2: override work func with vcn1.0's own Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
changzhu authored
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by:
changzhu <Changfeng.Zhu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Acked-by:
-
Emily Deng authored
Fix Tonga sriov load driver fail issue. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewd-by Yintian Tao <Yintian.tao@amd.com> Signed-off-by:
-
Guchun Chen authored
BACO reset mode strategy is determined by latter func when calling amdgpu_ras_reset_gpu. So not to confuse audience, drop it. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
Roman Li authored
[Why] The earlier change: "check phy dpalt lane count config" uses link encoder registers not defined properly. That caused regression with mst-enabled display not lighting up. [How] Add missing reg definitions. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Roman Li authored
add reg headers to dpcs includes Signed-off-by:
-
Roman Li authored
- create dpcs directory for dpcs asic_reg headers - move dpcs21 reg headers from dcn to dpcs directory Signed-off-by:
-
Yong Zhao authored
The log will be useful for easily getting the CU info on various emulation models or ASICs. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
-
Yong Zhao authored
Since Arcturus has it own function pointer, we can move Arcturus specific logic to there rather than leaving it entangled with other GFX9 chips. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Colin Ian King authored
There are several occurrances of the pointer hwmgr being dereferenced before it is null checked. Fix these by performing the dereference of hwmgr after it has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: c9ffa427 ("drm/amd/powerplay: enable pp one vf mode for vega10") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Philip Yang authored
Because queue_work schedule the work on the same CPU the interrupt handler is running, if there are many interrupts pending, it takes longer time for work queue to start, or even worse system will hang. v2: queue work to same NUMA node for better cache locality v3: handle cpumask_next wraparound case Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by:
-
Timothy Pearson authored
dc20 containes several FPU-dependent functions without proper FPU kernel mode enable/disable wrappers. Add the required wrappers for both x86 and POWER. This enables Navi DC20 support for POWER systems. v2: fix compilation Signed-off-by:
Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by:
-
Timothy Pearson authored
DCN requires floating point support to operate. Add the appropriate x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN. Note that the current DC20 code doesn't contain all required FPU wrappers on x86 or POWER, so this patch is insufficient to fully enable DC20 on POWER. v2: s/X86_64/X86/g to retain previous behavior. Signed-off-by:
-
Timothy Pearson authored
Introduce DC_FP_START()/DC_FP_END() macros to help enable floating point kernel mode support across various architectures. v2: move copyright update to commit which adds the changes Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDaniel Vetter authored
R-Car Display Unit changes: - Color Management Module support - LVDS encoder dual-link support enhancements - R8A77980 support Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218151710.GA13830@pendragon.ideasonboard.com
-
Kieran Bingham authored
Add direct support for the r8a77980 (V3H). The V3H shares a common, compatible configuration with the r8a77970 (V3M) so that device info structure is reused. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
