1. 05 Feb, 2010 3 commits
  2. 31 Jan, 2010 2 commits
  3. 29 Jan, 2010 2 commits
  4. 27 Jan, 2010 1 commit
  5. 25 Jan, 2010 3 commits
  6. 21 Jan, 2010 21 commits
  7. 20 Jan, 2010 8 commits
    • Lothar Wassmann's avatar
      USB: isp1362: fix build failure on ARM systems via irq_flags cleanup · 0a2fea2e
      Lothar Wassmann authored
      There was some left over #ifdef ARM logic that is outdated but no one
      really noticed.  So instead of relying on this tricky logic, properly
      load and utilize the platform irq_flags resources.
      Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarLothar Wassmann <LW@KARO-electronics.de>
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      0a2fea2e
    • Lothar Wassmann's avatar
      USB: isp1362: better 64bit printf warning fixes · 96b85179
      Lothar Wassmann authored
      Some hosts that treat the return value of sizeof differently from unsigned
      long might still hit warnings.  So use %zu for sizeof() values.  This is a
      better version of the previous commit b0a9cf29.
      Signed-off-by: default avatarLothar Wassmann <LW@KARO-electronics.de>
      Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      96b85179
    • Ryan May's avatar
      USB: fix usbstorage for 2770:915d delivers no FAT · 10d2cdb6
      Ryan May authored
      Resolves kernel.org bug 14914.
      
      Remove entry for 2770:915d (usb digital camera with mass storage
      support) from unusual_devs.h. The fix triggered by the entry causes
      the file system on the camera to be completely inaccessible (no
      partition table, the device is not mountable).
      
      The patch works, but let me clarify a few things about it.  All the
      patch does is remove the entry for this device from the
      drivers/usb/storage/unusual_devs.h, which is supposed to help with a
      problem with the device's reported size (I think).  I'm pretty sure it
      was originally added for a reason, so I'm not sure removing it won't
      cause other problems to reappear.  Also, I should note that this
      unusual_devs.h entry was present (and activating workarounds) in
      2.6.29, but in that version everything works fine.  Starting with
      2.6.30, things no longer work.
      Signed-off-by: default avatarRyan May <rmay31@gmail.com>
      Cc: Rohan Hart <rohan.hart17@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      10d2cdb6
    • Colin Tuckley's avatar
      USB: Fix level of isp1760 Reloading ptd error message · c0d74142
      Colin Tuckley authored
      This error message is not actually an error, it's an information
      message. It is triggered when a transfer which ended in a NAQ is
      retried successfully by the hardware.
      Signed-off-by: default avatarColin Tuckley <colin.tuckley@arm.com>
      Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c0d74142
    • Alexander Beregalov's avatar
      USB: FHCI: avoid NULL pointer dereference · ae35fe9e
      Alexander Beregalov authored
      Assign fhci only if usb is not NULL.
      Signed-off-by: default avatarAlexander Beregalov <a.beregalov@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      ae35fe9e
    • Sarah Sharp's avatar
      USB: Fix duplicate sysfs problem after device reset. · 04a723ea
      Sarah Sharp authored
      Borislav Petkov reports issues with duplicate sysfs endpoint files after a
      resume from a hibernate.  It turns out that the code to support alternate
      settings under xHCI has issues when a device with a non-default alternate
      setting is reset during the hibernate:
      
      [  427.681810] Restarting tasks ...
      [  427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
      [  427.682019] usb usb3: usb resume
      [  427.682030] ohci_hcd 0000:00:12.0: wakeup root hub
      [  427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
      [  427.682205] usb 1-2: usb wakeup-resume
      [  427.682226] usb 1-2: finish reset-resume
      [  427.682886] done.
      [  427.734658] ehci_hcd 0000:00:12.2: port 2 high speed
      [  427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
      [  427.746682] hub 3-0:1.0: hub_reset_resume
      [  427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub
      [  427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2
      [  427.839653] ehci_hcd 0000:00:12.2: port 2 high speed
      [  427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
      [  427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
      [  427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1
      [  427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1
      [  427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed.
      [  427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0
      [  427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1
      [  427.916609]  ep_81: create, parent hub
      [  427.916632] ------------[ cut here ]------------
      [  427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96()
      [  427.916649] Hardware name: System Product Name
      [  427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81'
      [  427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat
      +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core
      [  427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869aa-dirty #13
      [  427.916699] Call Trace:
      
      The problem is caused by a mismatch between the USB core's view of the
      device state and the USB device and xHCI host's view of the device state.
      
      After the device reset and re-configuration, the device and the xHCI host
      think they are using alternate setting 0 of all interfaces.  However, the
      USB core keeps track of the old state, which may include non-zero
      alternate settings.  It uses intf->cur_altsetting to keep the endpoint
      sysfs files for the old state across the reset.
      
      The bandwidth allocation functions need to know what the xHCI host thinks
      the current alternate settings are, so original patch set
      intf->cur_altsetting to the alternate setting 0.  This caused duplicate
      endpoint files to be created.
      
      The solution is to not set intf->cur_altsetting before calling
      usb_set_interface() in usb_reset_and_verify_device().  Instead, we add a
      new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use
      alternate setting 0 as the currently installed alternate setting.
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Tested-by: default avatarBorislav Petkov <petkovbb@googlemail.com>
      Cc: Alan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      04a723ea
    • Greg Kroah-Hartman's avatar
      USB: add speed values for USB 3.0 and wireless controllers · b132b04e
      Greg Kroah-Hartman authored
      These controllers say "unknown" for their speed in sysfs, which
      obviously isn't correct.
      Reported-by: default avatarKurt Garloff <garloff@novell.com>
      Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
      Cc: David Vrabel <david.vrabel@csr.com>
      Cc: stable <stable@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b132b04e
    • Alan Stern's avatar
      USB: add missing delay during remote wakeup · 49d0f078
      Alan Stern authored
      This patch (as1330) fixes a bug in khbud's handling of remote
      wakeups.  When a device sends a remote-wakeup request, the parent hub
      (or the host controller driver, for directly attached devices) begins
      the resume sequence and notifies khubd when the sequence finishes.  At
      this point the port's SUSPEND feature is automatically turned off.
      
      However the device needs an additional 10-ms resume-recovery time
      (TRSMRCY in the USB spec).  Khubd does not wait for this delay if the
      SUSPEND feature is off, and as a result some devices fail to behave
      properly following a remote wakeup.  This patch adds the missing
      delay to the remote-wakeup path.
      
      It also extends the resume-signalling delay used by ehci-hcd and
      uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use
      for non-remote-wakeup resumes).  The extra time appears to help some
      devices.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Cc: stable <stable@kernel.org>
      Cc: Rickard Bellini <rickard.bellini@ericsson.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
      49d0f078